mbox series

[v2,0/3] P2040/P2041 i2c recovery erratum

Message ID 20210507004047.4454-1-chris.packham@alliedtelesis.co.nz
Headers show
Series P2040/P2041 i2c recovery erratum | expand

Message

Chris Packham May 7, 2021, 12:40 a.m. UTC
The P2040/P2041 has an erratum where the i2c recovery scheme
documented in the reference manual (and currently implemented
in the i2c-mpc.c driver) does not work. The errata document
provides an alternative that does work. This series implements
that alternative and uses a property in the devicetree to
decide when the alternative mechanism is needed.

Chris Packham (3):
  dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
  powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c
    controllers
  i2c: mpc: implement erratum A-004447 workaround

 .../devicetree/bindings/i2c/i2c-mpc.yaml      |  7 ++
 arch/powerpc/boot/dts/fsl/p2041si-post.dtsi   | 16 ++++
 drivers/i2c/busses/i2c-mpc.c                  | 84 ++++++++++++++++++-
 3 files changed, 105 insertions(+), 2 deletions(-)