diff mbox series

[v2,1/5] gpio: mvebu: fix pwm .get_state period calculation

Message ID 57860e4929a9d20d73f5e003a148b86a9f82310e.1610529002.git.baruch@tkos.co.il
State New
Headers show
Series gpio: mvebu: pwm fixes and improvements | expand

Commit Message

Baruch Siach Jan. 13, 2021, 9:22 a.m. UTC
The period is the sum of on and off values. That is, calculate period as

  ($on + $off) / clkrate

instead of

  $off / clkrate - $on / clkrate

that makes no sense.

Reported-by: Russell King <linux@armlinux.org.uk>
Fixes: 757642f9a584e ("gpio: mvebu: Add limited PWM support")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
 drivers/gpio/gpio-mvebu.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

Comments

Uwe Kleine-König Jan. 13, 2021, 9:27 a.m. UTC | #1
On Wed, Jan 13, 2021 at 11:22:41AM +0200, Baruch Siach wrote:
> The period is the sum of on and off values. That is, calculate period as
> 
>   ($on + $off) / clkrate
> 
> instead of
> 
>   $off / clkrate - $on / clkrate
> 
> that makes no sense.
> 
> Reported-by: Russell King <linux@armlinux.org.uk>
> Fixes: 757642f9a584e ("gpio: mvebu: Add limited PWM support")
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>

Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Best regards
Uwe
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 672681a976f5..a912a8fed197 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -676,20 +676,17 @@  static void mvebu_pwm_get_state(struct pwm_chip *chip,
 	else
 		state->duty_cycle = 1;
 
+	val = (unsigned long long) u; /* on duration */
 	regmap_read(mvpwm->regs, mvebu_pwmreg_blink_off_duration(mvpwm), &u);
-	val = (unsigned long long) u * NSEC_PER_SEC;
+	val += (unsigned long long) u; /* period = on + off duration */
+	val *= NSEC_PER_SEC;
 	do_div(val, mvpwm->clk_rate);
-	if (val < state->duty_cycle) {
+	if (val > UINT_MAX)
+		state->period = UINT_MAX;
+	else if (val)
+		state->period = val;
+	else
 		state->period = 1;
-	} else {
-		val -= state->duty_cycle;
-		if (val > UINT_MAX)
-			state->period = UINT_MAX;
-		else if (val)
-			state->period = val;
-		else
-			state->period = 1;
-	}
 
 	regmap_read(mvchip->regs, GPIO_BLINK_EN_OFF + mvchip->offset, &u);
 	if (u)