diff mbox series

[v15,3/3] iio: adc: ad7173: add AD7173 driver

Message ID 20240223133758.9787-3-mitrutzceclan@gmail.com
State New
Headers show
Series [v15,1/3] dt-bindings: adc: add AD7173 | expand

Commit Message

Ceclan, Dumitru Feb. 23, 2024, 1:37 p.m. UTC
The AD7173 family offer a complete integrated Sigma-Delta ADC solution
which can be used in high precision, low noise single channel
applications or higher speed multiplexed applications. The Sigma-Delta
ADC is intended primarily for measurement of signals close to DC but also
delivers outstanding performance with input bandwidths out to ~10kHz.

Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Michael Walle <michael@walle.cc> # for gpio-regmap
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
---
V14-> V15
 - Use local var for dev instead of &st->sd.spi->dev
 - Use sizeof(*st->config_cnts)
 - Use device_property_match_property_string()
 - ENODATA error when no channels are specified
V13-> V14
 - Update year copyright range
 - Drop the ad_sigma_delta_info.irq_flags assigment
 - Use spi_setup() after spi mode assigment
 - Check IS_ENABLED(CONFIG_COMMON_CLK) for clk registering, drop fwnode NULL check
 - Rename variable fwnode
V12-> V13
- Add precursor patch for new irq_num attribute in ad_sigma_delta_info and ad_sigma_delta structs
- Split  *_fw_parse_channel_config() into *_channel_config and *_device_config
- Reorder probe calls to ad_sd_init to use correctly the optional irq_num attribute
- Require  in probe interrupt named "rdy" to be present
- If external clock not present, register clk provider
- If external clock present, get clock and enable
- Add constants, strings for clock selections
V11-> V12
 - rename refin, refin2 to vref, vref2
V10-> V11 <no changes>
V9 -> V10 <no changes>
V8 -> V9
 - Add '(x)' to some macro's definition to reduce NO of checks
 - Use reg 0 constant definition in debug_reg_access()
 - Rename  channels_st_priv_arr to chans_st_arr
 - Remove unnecessary u32 cast from read_raw()
 - Compute read_raw() offset instead of constant
 - Add offset comments to data rate arrays
 - Removed redundant newline in _parse_channel_config()
V7 -> V8
 - remove Kconfig commas
 - reorder include <...gpio/regmap.h>
 - GPO12_DATA(x)  from BIT(x) -> BIT(x+0)
 - use the same pointer to dev in ad7173_setup()
 - rewrite temp channel read_raw scale for better readability
 - add comment to explain temp channel offset
 - follow multi-line comment style
 - change ref_sel type to signed int
 - use fwnode_property_match_property_string()
V6 -> V7
 - format Kconfig supported models using '-'
 - include types.h instead of stddef.h
 - change device_info->num_gpios type to u8
 - reorder fields in ad7173_state, place ad_sigma_delta
 - reorder fields in ad7173_device_info, group by type
 - add default case in read_raw()
 - rename ad7173_debug() to ad7173_debug_reg_access()
 - remove explicit u8 cast
 - remove return 0; for offset in read_raw()
 - add '\n' to error messages
 - reorder probe variables -> reversed xmas tree
 - remove redundant inner commas in of_match and id_table
 - simplify selected reference code by setting default value and ignoring
   fwnode_property_read_string() error
 - use match_string() for finding selected reference
 - err on no channels specified
 - add missing fwnode_handle_put(child) on err return branches
 - remove spi_set_drvdata() from probe
 - remove offset variable from find_live_config(), not used
 - add comment showing a generic LRU implementation might be used if one
   will exist
 - MISC:  add blank line to chanel_config struct, trailing comma ref_sel_str[],
   remove blank line in update_scan_mode(), add spaces around '/'
V5->V6 <no changes>
V4 -> V5
 - List Kconfig supported models one per line
 - Include <array_size.h> and <container_of.h>
 - Remove bits.h and kernel.h include
 - Add spaces before '\' on multi-line definitions
 - Change constant definition name from "..._MICROV" to "..._uV"
 - Change ad7173_channel_config attributes order for grouping by type
 - Remove redundant {} in ad7173_gpio_init()
 - Add array with reference select strings
 - Change parsing of device tree adi,reference-select from integer to string
 - Change indentation  for ad7173_find_live_config() header
 - Use struct_group() in config struct
 - Use offsetofend() and sizeof_field() in ad7173_find_live_config()
 - Split line on logic operator in ad7173_find_live_config() at configs comparison
 - Use IDA for config slots allocation
 - Reverse xmas tree order for probe local variables
 - Use BIT() for computing bipolar channels offset
 - Change (MICRO/MILLI) to MILLI in read_raw for integer part of sampling frequency
 - MISC: remove blank line, use 0 value dirrectly, one line statement devm_kcalloc()
V3 -> V4
 - cleaned up includes
 - add ad7173_gpio_disable(), include to devm actions
 - remove iio_device_claim_direct_mode() from update_scan_mode()
 - always set differential iio_chan attribute to true, retain bipolar info only in private struct
 - store multiple regulators in state for voltage references
 - compute read_raw offset depending on channel used reference
 - configure channel setup using selected reference
 - add ad7173_get_ref_voltage_milli() 
 - clean up ad7173_fw_sparse_channel_config() changing array access of channel structs to pointers
 - retain chip name in st->info structure
 - use spi_device_get_match_data() in probe
V2 -> V3
 - change Kconfig GPIO_REGMAP and REGMAP_SPI to be conditioned by GPIOLIB
 - cast chip info to (kernel_ulong_t) to suppress warnings
 - adjust copyright year to reflect the out-of-tree history
 - remove unused sysfs and trigger header files
 - clean up defined macros by using FIELD_PREP( ) inline
 - use DECLARE_BITMAP( ) for defiining cfg_slots_status
 - use clear/set _bit instead of assign_bit
 - rename state field regmap to reg_gpiocon_regmap to better represent usage
 - replace container_of( ) usages to ad_sigma_delta_to_ad7173( )
 - improve readability of sampling frequency conversion in write_raw( )
				specifying conversion from Micro to Milli
 - use iio_device_claim_direct_mode( ) correctly in write_raw( )
 - flip logic in write_raw( ) to reduce line length
 - pass only state struct to gpio_init function
 - remove else branch at end of probe
 - remove comma after list terminator for of_match and id_table arrays
 - clarify write_raw( ) realbits 32 bit size check in a comment
 - change parsed fw property 'adi,bipolar' to 'bipolar' to matched referenced adc.yaml 
 - use reg_set_base for gpio regmap xlate 
V1 -> V2
 - keep original out-of-tree AD7173 naming
 - remove gpio_cleanup
 - handle 32bit realbits offset case
 - use iio_device_claim_direct_mode, drop own mutex
 - use dev_err_probe
 - cleanup headers include
 - use GENMASK() and FIELD_PREP()
 - use HZ_PER_MHZ
 - change #ifdef GPIOLIB to if( IS_ENABLED(CONFIG_GPIOLIB)) 
 - use gpio-regmap
 - change boolean flag in info struct to number of gpios
 - NIH memset64
 - use struct pointers for config comparison
 - use spi_write_then_read for ADC reset
 - use stack allocated buffer for reset
 - define constant for reset sequence size
 - use kcalloc instead of kzalloc
 - change of naming to fw of dt parse function
 - change de-referencing chain to local variable dev in multiple locations
 - drop write_raw_get_fmt
 - add driver private data to spi_device_id table
 - use fsleep() instead of usleep_range()
 - put config value inline
 - align read/write raw arguments
 - remove zeroed values from channel templates structure
 - define constants for temperature sensor positive and negative inputs
 - always enable temperature channel
 - configure spi clock phase and polarity from driver
 misc changes (test bit, return disable all, indentation fix, change statements to single line)

 drivers/iio/adc/Kconfig  |   17 +
 drivers/iio/adc/Makefile |    1 +
 drivers/iio/adc/ad7173.c | 1104 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 1122 insertions(+)
 create mode 100644 drivers/iio/adc/ad7173.c

Comments

Nuno Sá Feb. 23, 2024, 2:15 p.m. UTC | #1
On Fri, 2024-02-23 at 15:37 +0200, Dumitru Ceclan wrote:
> The AD7173 family offer a complete integrated Sigma-Delta ADC solution
> which can be used in high precision, low noise single channel
> applications or higher speed multiplexed applications. The Sigma-Delta
> ADC is intended primarily for measurement of signals close to DC but also
> delivers outstanding performance with input bandwidths out to ~10kHz.
> 
> Reviewed-by: Andy Shevchenko <andy@kernel.org>
> Reviewed-by: Michael Walle <michael@walle.cc> # for gpio-regmap
> Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
> ---

Any reason for dropping my rb tag? Anyways...

Reviewed-by: Nuno Sa <nuno.sa@analog.com>

> V14-> V15
>  - Use local var for dev instead of &st->sd.spi->dev
>  - Use sizeof(*st->config_cnts)
>  - Use device_property_match_property_string()
>  - ENODATA error when no channels are specified
> V13-> V14
>  - Update year copyright range
>  - Drop the ad_sigma_delta_info.irq_flags assigment
>  - Use spi_setup() after spi mode assigment
>  - Check IS_ENABLED(CONFIG_COMMON_CLK) for clk registering, drop fwnode NULL
> check
>  - Rename variable fwnode
> V12-> V13
> - Add precursor patch for new irq_num attribute in ad_sigma_delta_info and
> ad_sigma_delta structs
> - Split  *_fw_parse_channel_config() into *_channel_config and *_device_config
> - Reorder probe calls to ad_sd_init to use correctly the optional irq_num
> attribute
> - Require  in probe interrupt named "rdy" to be present
> - If external clock not present, register clk provider
> - If external clock present, get clock and enable
> - Add constants, strings for clock selections
> V11-> V12
>  - rename refin, refin2 to vref, vref2
> V10-> V11 <no changes>
> V9 -> V10 <no changes>
> V8 -> V9
>  - Add '(x)' to some macro's definition to reduce NO of checks
>  - Use reg 0 constant definition in debug_reg_access()
>  - Rename  channels_st_priv_arr to chans_st_arr
>  - Remove unnecessary u32 cast from read_raw()
>  - Compute read_raw() offset instead of constant
>  - Add offset comments to data rate arrays
>  - Removed redundant newline in _parse_channel_config()
> V7 -> V8
>  - remove Kconfig commas
>  - reorder include <...gpio/regmap.h>
>  - GPO12_DATA(x)  from BIT(x) -> BIT(x+0)
>  - use the same pointer to dev in ad7173_setup()
>  - rewrite temp channel read_raw scale for better readability
>  - add comment to explain temp channel offset
>  - follow multi-line comment style
>  - change ref_sel type to signed int
>  - use fwnode_property_match_property_string()
> V6 -> V7
>  - format Kconfig supported models using '-'
>  - include types.h instead of stddef.h
>  - change device_info->num_gpios type to u8
>  - reorder fields in ad7173_state, place ad_sigma_delta
>  - reorder fields in ad7173_device_info, group by type
>  - add default case in read_raw()
>  - rename ad7173_debug() to ad7173_debug_reg_access()
>  - remove explicit u8 cast
>  - remove return 0; for offset in read_raw()
>  - add '\n' to error messages
>  - reorder probe variables -> reversed xmas tree
>  - remove redundant inner commas in of_match and id_table
>  - simplify selected reference code by setting default value and ignoring
>    fwnode_property_read_string() error
>  - use match_string() for finding selected reference
>  - err on no channels specified
>  - add missing fwnode_handle_put(child) on err return branches
>  - remove spi_set_drvdata() from probe
>  - remove offset variable from find_live_config(), not used
>  - add comment showing a generic LRU implementation might be used if one
>    will exist
>  - MISC:  add blank line to chanel_config struct, trailing comma
> ref_sel_str[],
>    remove blank line in update_scan_mode(), add spaces around '/'
> V5->V6 <no changes>
> V4 -> V5
>  - List Kconfig supported models one per line
>  - Include <array_size.h> and <container_of.h>
>  - Remove bits.h and kernel.h include
>  - Add spaces before '\' on multi-line definitions
>  - Change constant definition name from "..._MICROV" to "..._uV"
>  - Change ad7173_channel_config attributes order for grouping by type
>  - Remove redundant {} in ad7173_gpio_init()
>  - Add array with reference select strings
>  - Change parsing of device tree adi,reference-select from integer to string
>  - Change indentation  for ad7173_find_live_config() header
>  - Use struct_group() in config struct
>  - Use offsetofend() and sizeof_field() in ad7173_find_live_config()
>  - Split line on logic operator in ad7173_find_live_config() at configs
> comparison
>  - Use IDA for config slots allocation
>  - Reverse xmas tree order for probe local variables
>  - Use BIT() for computing bipolar channels offset
>  - Change (MICRO/MILLI) to MILLI in read_raw for integer part of sampling
> frequency
>  - MISC: remove blank line, use 0 value dirrectly, one line statement
> devm_kcalloc()
> V3 -> V4
>  - cleaned up includes
>  - add ad7173_gpio_disable(), include to devm actions
>  - remove iio_device_claim_direct_mode() from update_scan_mode()
>  - always set differential iio_chan attribute to true, retain bipolar info
> only in private struct
>  - store multiple regulators in state for voltage references
>  - compute read_raw offset depending on channel used reference
>  - configure channel setup using selected reference
>  - add ad7173_get_ref_voltage_milli() 
>  - clean up ad7173_fw_sparse_channel_config() changing array access of channel
> structs to pointers
>  - retain chip name in st->info structure
>  - use spi_device_get_match_data() in probe
> V2 -> V3
>  - change Kconfig GPIO_REGMAP and REGMAP_SPI to be conditioned by GPIOLIB
>  - cast chip info to (kernel_ulong_t) to suppress warnings
>  - adjust copyright year to reflect the out-of-tree history
>  - remove unused sysfs and trigger header files
>  - clean up defined macros by using FIELD_PREP( ) inline
>  - use DECLARE_BITMAP( ) for defiining cfg_slots_status
>  - use clear/set _bit instead of assign_bit
>  - rename state field regmap to reg_gpiocon_regmap to better represent usage
>  - replace container_of( ) usages to ad_sigma_delta_to_ad7173( )
>  - improve readability of sampling frequency conversion in write_raw( )
> 				specifying conversion from Micro to Milli
>  - use iio_device_claim_direct_mode( ) correctly in write_raw( )
>  - flip logic in write_raw( ) to reduce line length
>  - pass only state struct to gpio_init function
>  - remove else branch at end of probe
>  - remove comma after list terminator for of_match and id_table arrays
>  - clarify write_raw( ) realbits 32 bit size check in a comment
>  - change parsed fw property 'adi,bipolar' to 'bipolar' to matched referenced
> adc.yaml 
>  - use reg_set_base for gpio regmap xlate 
> V1 -> V2
>  - keep original out-of-tree AD7173 naming
>  - remove gpio_cleanup
>  - handle 32bit realbits offset case
>  - use iio_device_claim_direct_mode, drop own mutex
>  - use dev_err_probe
>  - cleanup headers include
>  - use GENMASK() and FIELD_PREP()
>  - use HZ_PER_MHZ
>  - change #ifdef GPIOLIB to if( IS_ENABLED(CONFIG_GPIOLIB)) 
>  - use gpio-regmap
>  - change boolean flag in info struct to number of gpios
>  - NIH memset64
>  - use struct pointers for config comparison
>  - use spi_write_then_read for ADC reset
>  - use stack allocated buffer for reset
>  - define constant for reset sequence size
>  - use kcalloc instead of kzalloc
>  - change of naming to fw of dt parse function
>  - change de-referencing chain to local variable dev in multiple locations
>  - drop write_raw_get_fmt
>  - add driver private data to spi_device_id table
>  - use fsleep() instead of usleep_range()
>  - put config value inline
>  - align read/write raw arguments
>  - remove zeroed values from channel templates structure
>  - define constants for temperature sensor positive and negative inputs
>  - always enable temperature channel
>  - configure spi clock phase and polarity from driver
>  misc changes (test bit, return disable all, indentation fix, change
> statements to single line)
> 
>  drivers/iio/adc/Kconfig  |   17 +
>  drivers/iio/adc/Makefile |    1 +
>  drivers/iio/adc/ad7173.c | 1104 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 1122 insertions(+)
>  create mode 100644 drivers/iio/adc/ad7173.c
> 
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 3b73c509bd68..c32054afdfc4 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -70,6 +70,23 @@ config AD7124
>  	  To compile this driver as a module, choose M here: the module will
> be
>  	  called ad7124.
>  
> +config AD7173
> +	tristate "Analog Devices AD7173 driver"
> +	depends on SPI_MASTER
> +	select AD_SIGMA_DELTA
> +	select GPIO_REGMAP if GPIOLIB
> +	select REGMAP_SPI if GPIOLIB
> +	help
> +	  Say yes here to build support for Analog Devices AD7173 and similar
> ADC
> +	  Currently supported models:
> +	   - AD7172-2
> +	   - AD7173-8
> +	   - AD7175-2
> +	   - AD7176-2
> +
> +	  To compile this driver as a module, choose M here: the module will
> be
> +	  called ad7173.
> +
>  config AD7192
>  	tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver"
>  	depends on SPI
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index d2fda54a3259..dd4210a3634f 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_AD7091R) += ad7091r-base.o
>  obj-$(CONFIG_AD7091R5) += ad7091r5.o
>  obj-$(CONFIG_AD7091R8) += ad7091r8.o
>  obj-$(CONFIG_AD7124) += ad7124.o
> +obj-$(CONFIG_AD7173) += ad7173.o
>  obj-$(CONFIG_AD7192) += ad7192.o
>  obj-$(CONFIG_AD7266) += ad7266.o
>  obj-$(CONFIG_AD7280) += ad7280a.o
> diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c
> new file mode 100644
> index 000000000000..3dde473cf859
> --- /dev/null
> +++ b/drivers/iio/adc/ad7173.c
> @@ -0,0 +1,1104 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * AD7172-2/AD7173-8/AD7175-2/AD7176-2 SPI ADC driver
> + * Copyright (C) 2015, 2024 Analog Devices, Inc.
> + */
> +
> +#include <linux/array_size.h>
> +#include <linux/bitfield.h>
> +#include <linux/bitmap.h>
> +#include <linux/container_of.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/gpio/regmap.h>
> +#include <linux/idr.h>
> +#include <linux/interrupt.h>
> +#include <linux/math64.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +#include <linux/spi/spi.h>
> +#include <linux/types.h>
> +#include <linux/units.h>
> +
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/triggered_buffer.h>
> +
> +#include <linux/iio/adc/ad_sigma_delta.h>
> +
> +#define AD7173_REG_COMMS		0x00
> +#define AD7173_REG_ADC_MODE		0x01
> +#define AD7173_REG_INTERFACE_MODE	0x02
> +#define AD7173_REG_CRC			0x03
> +#define AD7173_REG_DATA			0x04
> +#define AD7173_REG_GPIO			0x06
> +#define AD7173_REG_ID			0x07
> +#define AD7173_REG_CH(x)		(0x10 + (x))
> +#define AD7173_REG_SETUP(x)		(0x20 + (x))
> +#define AD7173_REG_FILTER(x)		(0x28 + (x))
> +#define AD7173_REG_OFFSET(x)		(0x30 + (x))
> +#define AD7173_REG_GAIN(x)		(0x38 + (x))
> +
> +#define AD7173_RESET_LENGTH		BITS_TO_BYTES(64)
> +
> +#define AD7173_CH_ENABLE		BIT(15)
> +#define AD7173_CH_SETUP_SEL_MASK	GENMASK(14, 12)
> +#define AD7173_CH_SETUP_AINPOS_MASK	GENMASK(9, 5)
> +#define AD7173_CH_SETUP_AINNEG_MASK	GENMASK(4, 0)
> +
> +#define AD7173_CH_ADDRESS(pos, neg) \
> +	(FIELD_PREP(AD7173_CH_SETUP_AINPOS_MASK, pos) | \
> +	 FIELD_PREP(AD7173_CH_SETUP_AINNEG_MASK, neg))
> +#define AD7173_AIN_TEMP_POS	17
> +#define AD7173_AIN_TEMP_NEG	18
> +
> +#define AD7172_ID			0x00d0
> +#define AD7173_ID			0x30d0
> +#define AD7175_ID			0x0cd0
> +#define AD7176_ID			0x0c90
> +#define AD7173_ID_MASK			GENMASK(15, 4)
> +
> +#define AD7173_ADC_MODE_REF_EN		BIT(15)
> +#define AD7173_ADC_MODE_SING_CYC	BIT(13)
> +#define AD7173_ADC_MODE_MODE_MASK	GENMASK(6, 4)
> +#define AD7173_ADC_MODE_CLOCKSEL_MASK	GENMASK(3, 2)
> +#define AD7173_ADC_MODE_CLOCKSEL_INT		0x0
> +#define AD7173_ADC_MODE_CLOCKSEL_INT_OUTPUT	0x1
> +#define AD7173_ADC_MODE_CLOCKSEL_EXT		0x2
> +#define AD7173_ADC_MODE_CLOCKSEL_XTAL		0x3
> +
> +#define AD7173_GPIO_PDSW	BIT(14)
> +#define AD7173_GPIO_OP_EN2_3	BIT(13)
> +#define AD7173_GPIO_MUX_IO	BIT(12)
> +#define AD7173_GPIO_SYNC_EN	BIT(11)
> +#define AD7173_GPIO_ERR_EN	BIT(10)
> +#define AD7173_GPIO_ERR_DAT	BIT(9)
> +#define AD7173_GPIO_GP_DATA3	BIT(7)
> +#define AD7173_GPIO_GP_DATA2	BIT(6)
> +#define AD7173_GPIO_IP_EN1	BIT(5)
> +#define AD7173_GPIO_IP_EN0	BIT(4)
> +#define AD7173_GPIO_OP_EN1	BIT(3)
> +#define AD7173_GPIO_OP_EN0	BIT(2)
> +#define AD7173_GPIO_GP_DATA1	BIT(1)
> +#define AD7173_GPIO_GP_DATA0	BIT(0)
> +
> +#define AD7173_GPO12_DATA(x)	BIT((x) + 0)
> +#define AD7173_GPO23_DATA(x)	BIT((x) + 4)
> +#define AD7173_GPO_DATA(x)	((x) < 2 ? AD7173_GPO12_DATA(x) :
> AD7173_GPO23_DATA(x))
> +
> +#define AD7173_INTERFACE_DATA_STAT	BIT(6)
> +#define AD7173_INTERFACE_DATA_STAT_EN(x) \
> +	FIELD_PREP(AD7173_INTERFACE_DATA_STAT, x)
> +
> +#define AD7173_SETUP_BIPOLAR		BIT(12)
> +#define AD7173_SETUP_AREF_BUF_MASK	GENMASK(11, 10)
> +#define AD7173_SETUP_AIN_BUF_MASK	GENMASK(9, 8)
> +
> +#define AD7173_SETUP_REF_SEL_MASK	GENMASK(5, 4)
> +#define AD7173_SETUP_REF_SEL_AVDD1_AVSS	0x3
> +#define AD7173_SETUP_REF_SEL_INT_REF	0x2
> +#define AD7173_SETUP_REF_SEL_EXT_REF2	0x1
> +#define AD7173_SETUP_REF_SEL_EXT_REF	0x0
> +#define AD7173_VOLTAGE_INT_REF_uV	2500000
> +#define AD7173_TEMP_SENSIIVITY_uV_per_C	477
> +
> +#define AD7173_FILTER_ODR0_MASK		GENMASK(5, 0)
> +#define AD7173_MAX_CONFIGS		8
> +
> +enum ad7173_ids {
> +	ID_AD7172_2,
> +	ID_AD7173_8,
> +	ID_AD7175_2,
> +	ID_AD7176_2,
> +};
> +
> +struct ad7173_device_info {
> +	const unsigned int *sinc5_data_rates;
> +	unsigned int num_sinc5_data_rates;
> +	unsigned int num_channels;
> +	unsigned int num_configs;
> +	unsigned int num_inputs;
> +	unsigned int clock;
> +	unsigned int id;
> +	char *name;
> +	bool has_temp;
> +	u8 num_gpios;
> +};
> +
> +struct ad7173_channel_config {
> +	u8 cfg_slot;
> +	bool live;
> +
> +	/* Following fields are used to compare equality. */
> +	struct_group(config_props,
> +		bool bipolar;
> +		bool input_buf;
> +		u8 odr;
> +		u8 ref_sel;
> +	);
> +};
> +
> +struct ad7173_channel {
> +	unsigned int chan_reg;
> +	unsigned int ain;
> +	struct ad7173_channel_config cfg;
> +};
> +
> +struct ad7173_state {
> +	struct ad_sigma_delta sd;
> +	const struct ad7173_device_info *info;
> +	struct ad7173_channel *channels;
> +	struct regulator_bulk_data regulators[3];
> +	unsigned int adc_mode;
> +	unsigned int interface_mode;
> +	unsigned int num_channels;
> +	struct ida cfg_slots_status;
> +	unsigned long long config_usage_counter;
> +	unsigned long long *config_cnts;
> +	struct clk *ext_clk;
> +	struct clk_hw int_clk_hw;
> +#if IS_ENABLED(CONFIG_GPIOLIB)
> +	struct regmap *reg_gpiocon_regmap;
> +	struct gpio_regmap *gpio_regmap;
> +#endif
> +};
> +
> +static const unsigned int ad7173_sinc5_data_rates[] = {
> +	6211000, 6211000, 6211000, 6211000, 6211000, 6211000, 5181000,
> 4444000,	/*  0-7  */
> +	3115000, 2597000, 1007000, 503800,  381000,  200300,  100500, 
> 59520,	/*  8-15 */
> +	49680,	 20010,	  16333,   10000,   5000,    2500,   
> 1250,		/* 16-22 */
> +};
> +
> +static const unsigned int ad7175_sinc5_data_rates[] = {
> +	50000000, 41667000, 31250000, 27778000,	/*  0-3  */
> +	20833000, 17857000, 12500000, 10000000,	/*  4-7  */
> +	5000000,  2500000,  1000000,  500000,	/*  8-11 */
> +	397500,   200000,   100000,   59920,	/* 12-15 */
> +	49960,    20000,    16666,    10000,	/* 16-19 */
> +	5000,					/* 20    */
> +};
> +
> +static const struct ad7173_device_info ad7173_device_info[] = {
> +	[ID_AD7172_2] = {
> +		.name = "ad7172-2",
> +		.id = AD7172_ID,
> +		.num_inputs = 5,
> +		.num_channels = 4,
> +		.num_configs = 4,
> +		.num_gpios = 2,
> +		.has_temp = true,
> +		.clock = 2 * HZ_PER_MHZ,
> +		.sinc5_data_rates = ad7173_sinc5_data_rates,
> +		.num_sinc5_data_rates = ARRAY_SIZE(ad7173_sinc5_data_rates),
> +	},
> +	[ID_AD7173_8] = {
> +		.name = "ad7173-8",
> +		.id = AD7173_ID,
> +		.num_inputs = 17,
> +		.num_channels = 16,
> +		.num_configs = 8,
> +		.num_gpios = 4,
> +		.has_temp = true,
> +		.clock = 2 * HZ_PER_MHZ,
> +		.sinc5_data_rates = ad7173_sinc5_data_rates,
> +		.num_sinc5_data_rates = ARRAY_SIZE(ad7173_sinc5_data_rates),
> +	},
> +	[ID_AD7175_2] = {
> +		.name = "ad7175-2",
> +		.id = AD7175_ID,
> +		.num_inputs = 5,
> +		.num_channels = 4,
> +		.num_configs = 4,
> +		.num_gpios = 2,
> +		.has_temp = true,
> +		.clock = 16 * HZ_PER_MHZ,
> +		.sinc5_data_rates = ad7175_sinc5_data_rates,
> +		.num_sinc5_data_rates = ARRAY_SIZE(ad7175_sinc5_data_rates),
> +	},
> +	[ID_AD7176_2] = {
> +		.name = "ad7176-2",
> +		.id = AD7176_ID,
> +		.num_inputs = 5,
> +		.num_channels = 4,
> +		.num_configs = 4,
> +		.num_gpios = 2,
> +		.has_temp = false,
> +		.clock = 16 * HZ_PER_MHZ,
> +		.sinc5_data_rates = ad7175_sinc5_data_rates,
> +		.num_sinc5_data_rates = ARRAY_SIZE(ad7175_sinc5_data_rates),
> +	},
> +};
> +
> +static const char *const ad7173_ref_sel_str[] = {
> +	[AD7173_SETUP_REF_SEL_EXT_REF]    = "vref",
> +	[AD7173_SETUP_REF_SEL_EXT_REF2]   = "vref2",
> +	[AD7173_SETUP_REF_SEL_INT_REF]    = "refout-avss",
> +	[AD7173_SETUP_REF_SEL_AVDD1_AVSS] = "avdd",
> +};
> +
> +static const char *const ad7173_clk_sel[] = {
> +	"ext-clk", "xtal"
> +};
> +
> +#if IS_ENABLED(CONFIG_GPIOLIB)
> +
> +static const struct regmap_range ad7173_range_gpio[] = {
> +	regmap_reg_range(AD7173_REG_GPIO, AD7173_REG_GPIO),
> +};
> +
> +static const struct regmap_access_table ad7173_access_table = {
> +	.yes_ranges = ad7173_range_gpio,
> +	.n_yes_ranges = ARRAY_SIZE(ad7173_range_gpio),
> +};
> +
> +static const struct regmap_config ad7173_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 16,
> +	.rd_table = &ad7173_access_table,
> +	.wr_table = &ad7173_access_table,
> +	.read_flag_mask = BIT(6),
> +};
> +
> +static int ad7173_mask_xlate(struct gpio_regmap *gpio, unsigned int base,
> +			     unsigned int offset, unsigned int *reg,
> +			     unsigned int *mask)
> +{
> +	*mask = AD7173_GPO_DATA(offset);
> +	*reg = base;
> +	return 0;
> +}
> +
> +static void ad7173_gpio_disable(void *data)
> +{
> +	struct ad7173_state *st = data;
> +	unsigned int mask;
> +
> +	mask = AD7173_GPIO_OP_EN0 | AD7173_GPIO_OP_EN1 |
> AD7173_GPIO_OP_EN2_3;
> +	regmap_update_bits(st->reg_gpiocon_regmap, AD7173_REG_GPIO, mask,
> ~mask);
> +}
> +
> +static int ad7173_gpio_init(struct ad7173_state *st)
> +{
> +	struct gpio_regmap_config gpio_regmap = {};
> +	struct device *dev = &st->sd.spi->dev;
> +	unsigned int mask;
> +	int ret;
> +
> +	st->reg_gpiocon_regmap = devm_regmap_init_spi(st->sd.spi,
> &ad7173_regmap_config);
> +	ret = PTR_ERR_OR_ZERO(st->reg_gpiocon_regmap);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Unable to init regmap\n");
> +
> +	mask = AD7173_GPIO_OP_EN0 | AD7173_GPIO_OP_EN1 |
> AD7173_GPIO_OP_EN2_3;
> +	regmap_update_bits(st->reg_gpiocon_regmap, AD7173_REG_GPIO, mask,
> mask);
> +
> +	ret = devm_add_action_or_reset(dev, ad7173_gpio_disable, st);
> +	if (ret)
> +		return ret;
> +
> +	gpio_regmap.parent = dev;
> +	gpio_regmap.regmap = st->reg_gpiocon_regmap;
> +	gpio_regmap.ngpio = st->info->num_gpios;
> +	gpio_regmap.reg_set_base = AD7173_REG_GPIO;
> +	gpio_regmap.reg_mask_xlate = ad7173_mask_xlate;
> +
> +	st->gpio_regmap = devm_gpio_regmap_register(dev, &gpio_regmap);
> +	ret = PTR_ERR_OR_ZERO(st->gpio_regmap);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Unable to init gpio-
> regmap\n");
> +
> +	return 0;
> +}
> +
> +#endif /* CONFIG_GPIOLIB */
> +
> +static struct ad7173_state *ad_sigma_delta_to_ad7173(struct ad_sigma_delta
> *sd)
> +{
> +	return container_of(sd, struct ad7173_state, sd);
> +}
> +
> +static struct ad7173_state *clk_hw_to_ad7173(struct clk_hw *hw)
> +{
> +	return container_of(hw, struct ad7173_state, int_clk_hw);
> +}
> +
> +static void ad7173_ida_destroy(void *data)
> +{
> +	struct ad7173_state *st = data;
> +
> +	ida_destroy(&st->cfg_slots_status);
> +}
> +
> +static void ad7173_reset_usage_cnts(struct ad7173_state *st)
> +{
> +	memset64(st->config_cnts, 0, st->info->num_configs);
> +	st->config_usage_counter = 0;
> +}
> +
> +static struct ad7173_channel_config *
> +ad7173_find_live_config(struct ad7173_state *st, struct ad7173_channel_config
> *cfg)
> +{
> +	struct ad7173_channel_config *cfg_aux;
> +	ptrdiff_t cmp_size;
> +	int i;
> +
> +	cmp_size = sizeof_field(struct ad7173_channel_config, config_props);
> +	for (i = 0; i < st->num_channels; i++) {
> +		cfg_aux = &st->channels[i].cfg;
> +
> +		if (cfg_aux->live &&
> +		    !memcmp(&cfg->config_props, &cfg_aux->config_props,
> cmp_size))
> +			return cfg_aux;
> +	}
> +	return NULL;
> +}
> +
> +/* Could be replaced with a generic LRU implementation */
> +static int ad7173_free_config_slot_lru(struct ad7173_state *st)
> +{
> +	int i, lru_position = 0;
> +
> +	for (i = 1; i < st->info->num_configs; i++)
> +		if (st->config_cnts[i] < st->config_cnts[lru_position])
> +			lru_position = i;
> +
> +	for (i = 0; i < st->num_channels; i++)
> +		if (st->channels[i].cfg.cfg_slot == lru_position)
> +			st->channels[i].cfg.live = false;
> +
> +	ida_free(&st->cfg_slots_status, lru_position);
> +	return ida_alloc(&st->cfg_slots_status, GFP_KERNEL);
> +}
> +
> +/* Could be replaced with a generic LRU implementation */
> +static int ad7173_load_config(struct ad7173_state *st,
> +			      struct ad7173_channel_config *cfg)
> +{
> +	unsigned int config;
> +	int free_cfg_slot, ret;
> +
> +	free_cfg_slot = ida_alloc_range(&st->cfg_slots_status, 0,
> +					st->info->num_configs - 1,
> GFP_KERNEL);
> +	if (free_cfg_slot < 0)
> +		free_cfg_slot = ad7173_free_config_slot_lru(st);
> +
> +	cfg->cfg_slot = free_cfg_slot;
> +	config = FIELD_PREP(AD7173_SETUP_REF_SEL_MASK, cfg->ref_sel);
> +
> +	if (cfg->bipolar)
> +		config |= AD7173_SETUP_BIPOLAR;
> +
> +	if (cfg->input_buf)
> +		config |= AD7173_SETUP_AIN_BUF_MASK;
> +
> +	ret = ad_sd_write_reg(&st->sd, AD7173_REG_SETUP(free_cfg_slot), 2,
> config);
> +	if (ret)
> +		return ret;
> +
> +	return ad_sd_write_reg(&st->sd, AD7173_REG_FILTER(free_cfg_slot), 2,
> +			       AD7173_FILTER_ODR0_MASK & cfg->odr);
> +}
> +
> +static int ad7173_config_channel(struct ad7173_state *st, int addr)
> +{
> +	struct ad7173_channel_config *cfg = &st->channels[addr].cfg;
> +	struct ad7173_channel_config *live_cfg;
> +	int ret;
> +
> +	if (!cfg->live) {
> +		live_cfg = ad7173_find_live_config(st, cfg);
> +		if (live_cfg) {
> +			cfg->cfg_slot = live_cfg->cfg_slot;
> +		} else {
> +			ret = ad7173_load_config(st, cfg);
> +			if (ret)
> +				return ret;
> +			cfg->live = true;
> +		}
> +	}
> +
> +	if (st->config_usage_counter == U64_MAX)
> +		ad7173_reset_usage_cnts(st);
> +
> +	st->config_usage_counter++;
> +	st->config_cnts[cfg->cfg_slot] = st->config_usage_counter;
> +
> +	return 0;
> +}
> +
> +static int ad7173_set_channel(struct ad_sigma_delta *sd, unsigned int
> channel)
> +{
> +	struct ad7173_state *st = ad_sigma_delta_to_ad7173(sd);
> +	unsigned int val;
> +	int ret;
> +
> +	ret = ad7173_config_channel(st, channel);
> +	if (ret)
> +		return ret;
> +
> +	val = AD7173_CH_ENABLE |
> +	      FIELD_PREP(AD7173_CH_SETUP_SEL_MASK, st-
> >channels[channel].cfg.cfg_slot) |
> +	      st->channels[channel].ain;
> +
> +	return ad_sd_write_reg(&st->sd, AD7173_REG_CH(channel), 2, val);
> +}
> +
> +static int ad7173_set_mode(struct ad_sigma_delta *sd,
> +			   enum ad_sigma_delta_mode mode)
> +{
> +	struct ad7173_state *st = ad_sigma_delta_to_ad7173(sd);
> +
> +	st->adc_mode &= ~AD7173_ADC_MODE_MODE_MASK;
> +	st->adc_mode |= FIELD_PREP(AD7173_ADC_MODE_MODE_MASK, mode);
> +
> +	return ad_sd_write_reg(&st->sd, AD7173_REG_ADC_MODE, 2, st-
> >adc_mode);
> +}
> +
> +static int ad7173_append_status(struct ad_sigma_delta *sd, bool append)
> +{
> +	struct ad7173_state *st = ad_sigma_delta_to_ad7173(sd);
> +	unsigned int interface_mode = st->interface_mode;
> +	int ret;
> +
> +	interface_mode |= AD7173_INTERFACE_DATA_STAT_EN(append);
> +	ret = ad_sd_write_reg(&st->sd, AD7173_REG_INTERFACE_MODE, 2,
> interface_mode);
> +	if (ret)
> +		return ret;
> +
> +	st->interface_mode = interface_mode;
> +
> +	return 0;
> +}
> +
> +static int ad7173_disable_all(struct ad_sigma_delta *sd)
> +{
> +	struct ad7173_state *st = ad_sigma_delta_to_ad7173(sd);
> +	int ret;
> +	int i;
> +
> +	for (i = 0; i < st->num_channels; i++) {
> +		ret = ad_sd_write_reg(sd, AD7173_REG_CH(i), 2, 0);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static struct ad_sigma_delta_info ad7173_sigma_delta_info = {
> +	.set_channel = ad7173_set_channel,
> +	.append_status = ad7173_append_status,
> +	.disable_all = ad7173_disable_all,
> +	.set_mode = ad7173_set_mode,
> +	.has_registers = true,
> +	.addr_shift = 0,
> +	.read_mask = BIT(6),
> +	.status_ch_mask = GENMASK(3, 0),
> +	.data_reg = AD7173_REG_DATA,
> +};
> +
> +static int ad7173_setup(struct iio_dev *indio_dev)
> +{
> +	struct ad7173_state *st = iio_priv(indio_dev);
> +	struct device *dev = &st->sd.spi->dev;
> +	u8 buf[AD7173_RESET_LENGTH];
> +	unsigned int id;
> +	int ret;
> +
> +	/* reset the serial interface */
> +	memset(buf, 0xff, AD7173_RESET_LENGTH);
> +	ret = spi_write_then_read(st->sd.spi, buf, sizeof(buf), NULL, 0);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* datasheet recommends a delay of at least 500us after reset */
> +	fsleep(500);
> +
> +	ret = ad_sd_read_reg(&st->sd, AD7173_REG_ID, 2, &id);
> +	if (ret)
> +		return ret;
> +
> +	id &= AD7173_ID_MASK;
> +	if (id != st->info->id)
> +		dev_warn(dev, "Unexpected device id: 0x%04X, expected:
> 0x%04X\n",
> +			 id, st->info->id);
> +
> +	st->adc_mode |= AD7173_ADC_MODE_SING_CYC;
> +	st->interface_mode = 0x0;
> +
> +	st->config_usage_counter = 0;
> +	st->config_cnts = devm_kcalloc(dev, st->info->num_configs,
> +				       sizeof(*st->config_cnts), GFP_KERNEL);
> +	if (!st->config_cnts)
> +		return -ENOMEM;
> +
> +	/* All channels are enabled by default after a reset */
> +	return ad7173_disable_all(&st->sd);
> +}
> +
> +static unsigned int ad7173_get_ref_voltage_milli(struct ad7173_state *st,
> +						 u8 reference_select)
> +{
> +	int vref;
> +
> +	switch (reference_select) {
> +	case AD7173_SETUP_REF_SEL_EXT_REF:
> +		vref = regulator_get_voltage(st->regulators[0].consumer);
> +		break;
> +
> +	case AD7173_SETUP_REF_SEL_EXT_REF2:
> +		vref = regulator_get_voltage(st->regulators[1].consumer);
> +		break;
> +
> +	case AD7173_SETUP_REF_SEL_INT_REF:
> +		vref = AD7173_VOLTAGE_INT_REF_uV;
> +		break;
> +
> +	case AD7173_SETUP_REF_SEL_AVDD1_AVSS:
> +		vref = regulator_get_voltage(st->regulators[2].consumer);
> +		break;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	if (vref < 0)
> +		return vref;
> +
> +	return vref / (MICRO / MILLI);
> +}
> +
> +static int ad7173_read_raw(struct iio_dev *indio_dev,
> +			   struct iio_chan_spec const *chan,
> +			   int *val, int *val2, long info)
> +{
> +	struct ad7173_state *st = iio_priv(indio_dev);
> +	struct ad7173_channel *ch = &st->channels[chan->address];
> +	unsigned int reg;
> +	u64 temp;
> +	int ret;
> +
> +	switch (info) {
> +	case IIO_CHAN_INFO_RAW:
> +		ret = ad_sigma_delta_single_conversion(indio_dev, chan, val);
> +		if (ret < 0)
> +			return ret;
> +
> +		/* disable channel after single conversion */
> +		ret = ad_sd_write_reg(&st->sd, AD7173_REG_CH(chan->address),
> 2, 0);
> +		if (ret < 0)
> +			return ret;
> +
> +		return IIO_VAL_INT;
> +	case IIO_CHAN_INFO_SCALE:
> +		if (chan->type == IIO_TEMP) {
> +			temp = AD7173_VOLTAGE_INT_REF_uV * MILLI;
> +			temp /= AD7173_TEMP_SENSIIVITY_uV_per_C;
> +			*val = temp;
> +			*val2 = chan->scan_type.realbits;
> +		} else {
> +			*val = ad7173_get_ref_voltage_milli(st, ch-
> >cfg.ref_sel);
> +			*val2 = chan->scan_type.realbits - !!(ch-
> >cfg.bipolar);
> +		}
> +		return IIO_VAL_FRACTIONAL_LOG2;
> +	case IIO_CHAN_INFO_OFFSET:
> +		if (chan->type == IIO_TEMP) {
> +			/* 0 Kelvin -> raw sample */
> +			temp   = -ABSOLUTE_ZERO_MILLICELSIUS;
> +			temp  *= AD7173_TEMP_SENSIIVITY_uV_per_C;
> +			temp <<= chan->scan_type.realbits;
> +			temp   = DIV_U64_ROUND_CLOSEST(temp,
> +						      
> AD7173_VOLTAGE_INT_REF_uV *
> +						       MILLI);
> +			*val   = -temp;
> +		} else {
> +			*val = -BIT(chan->scan_type.realbits - 1);
> +		}
> +		return IIO_VAL_INT;
> +	case IIO_CHAN_INFO_SAMP_FREQ:
> +		reg = st->channels[chan->address].cfg.odr;
> +
> +		*val = st->info->sinc5_data_rates[reg] / MILLI;
> +		*val2 = (st->info->sinc5_data_rates[reg] % MILLI) * (MICRO /
> MILLI);
> +
> +		return IIO_VAL_INT_PLUS_MICRO;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int ad7173_write_raw(struct iio_dev *indio_dev,
> +			    struct iio_chan_spec const *chan,
> +			    int val, int val2, long info)
> +{
> +	struct ad7173_state *st = iio_priv(indio_dev);
> +	struct ad7173_channel_config *cfg;
> +	unsigned int freq, i, reg;
> +	int ret;
> +
> +	ret = iio_device_claim_direct_mode(indio_dev);
> +	if (ret)
> +		return ret;
> +
> +	switch (info) {
> +	case IIO_CHAN_INFO_SAMP_FREQ:
> +		freq = val * MILLI + val2 / MILLI;
> +		for (i = 0; i < st->info->num_sinc5_data_rates - 1; i++)
> +			if (freq >= st->info->sinc5_data_rates[i])
> +				break;
> +
> +		cfg = &st->channels[chan->address].cfg;
> +		cfg->odr = i;
> +
> +		if (!cfg->live)
> +			break;
> +
> +		ret = ad_sd_read_reg(&st->sd, AD7173_REG_FILTER(cfg-
> >cfg_slot), 2, &reg);
> +		if (ret)
> +			break;
> +		reg &= ~AD7173_FILTER_ODR0_MASK;
> +		reg |= FIELD_PREP(AD7173_FILTER_ODR0_MASK, i);
> +		ret = ad_sd_write_reg(&st->sd, AD7173_REG_FILTER(cfg-
> >cfg_slot), 2, reg);
> +		break;
> +
> +	default:
> +		ret = -EINVAL;
> +		break;
> +	}
> +
> +	iio_device_release_direct_mode(indio_dev);
> +	return ret;
> +}
> +
> +static int ad7173_update_scan_mode(struct iio_dev *indio_dev,
> +				   const unsigned long *scan_mask)
> +{
> +	struct ad7173_state *st = iio_priv(indio_dev);
> +	int i, ret;
> +
> +	for (i = 0; i < indio_dev->num_channels; i++) {
> +		if (test_bit(i, scan_mask))
> +			ret = ad7173_set_channel(&st->sd, i);
> +		else
> +			ret = ad_sd_write_reg(&st->sd, AD7173_REG_CH(i), 2,
> 0);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int ad7173_debug_reg_access(struct iio_dev *indio_dev, unsigned int
> reg,
> +				   unsigned int writeval, unsigned int
> *readval)
> +{
> +	struct ad7173_state *st = iio_priv(indio_dev);
> +	u8 reg_size;
> +
> +	if (reg == AD7173_REG_COMMS)
> +		reg_size = 1;
> +	else if (reg == AD7173_REG_CRC || reg == AD7173_REG_DATA ||
> +		 reg >= AD7173_REG_OFFSET(0))
> +		reg_size = 3;
> +	else
> +		reg_size = 2;
> +
> +	if (readval)
> +		return ad_sd_read_reg(&st->sd, reg, reg_size, readval);
> +
> +	return ad_sd_write_reg(&st->sd, reg, reg_size, writeval);
> +}
> +
> +static const struct iio_info ad7173_info = {
> +	.read_raw = &ad7173_read_raw,
> +	.write_raw = &ad7173_write_raw,
> +	.debugfs_reg_access = &ad7173_debug_reg_access,
> +	.validate_trigger = ad_sd_validate_trigger,
> +	.update_scan_mode = ad7173_update_scan_mode,
> +};
> +
> +static const struct iio_chan_spec ad7173_channel_template = {
> +	.type = IIO_VOLTAGE,
> +	.indexed = 1,
> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> +		BIT(IIO_CHAN_INFO_SCALE),
> +	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> +	.scan_type = {
> +		.sign = 'u',
> +		.realbits = 24,
> +		.storagebits = 32,
> +		.endianness = IIO_BE,
> +	},
> +};
> +
> +static const struct iio_chan_spec ad7173_temp_iio_channel_template = {
> +	.type = IIO_TEMP,
> +	.indexed = 1,
> +	.channel = AD7173_AIN_TEMP_POS,
> +	.channel2 = AD7173_AIN_TEMP_NEG,
> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> +		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET),
> +	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> +	.scan_type = {
> +		.sign = 'u',
> +		.realbits = 24,
> +		.storagebits = 32,
> +		.endianness = IIO_BE,
> +	},
> +};
> +
> +static void ad7173_disable_regulators(void *data)
> +{
> +	struct ad7173_state *st = data;
> +
> +	regulator_bulk_disable(ARRAY_SIZE(st->regulators), st->regulators);
> +}
> +
> +static void ad7173_clk_disable_unprepare(void *clk)
> +{
> +	clk_disable_unprepare(clk);
> +}
> +
> +static unsigned long ad7173_sel_clk(struct ad7173_state *st,
> +				    unsigned int clk_sel)
> +{
> +	int ret;
> +
> +	st->adc_mode &= !AD7173_ADC_MODE_CLOCKSEL_MASK;
> +	st->adc_mode |= FIELD_PREP(AD7173_ADC_MODE_CLOCKSEL_MASK, clk_sel);
> +	ret = ad_sd_write_reg(&st->sd, AD7173_REG_ADC_MODE, 0x2, st-
> >adc_mode);
> +
> +	return ret;
> +}
> +
> +static unsigned long ad7173_clk_recalc_rate(struct clk_hw *hw,
> +					    unsigned long parent_rate)
> +{
> +	struct ad7173_state *st = clk_hw_to_ad7173(hw);
> +
> +	return st->info->clock / HZ_PER_KHZ;
> +}
> +
> +static int ad7173_clk_output_is_enabled(struct clk_hw *hw)
> +{
> +	struct ad7173_state *st = clk_hw_to_ad7173(hw);
> +	u32 clk_sel;
> +
> +	clk_sel = FIELD_GET(AD7173_ADC_MODE_CLOCKSEL_MASK, st->adc_mode);
> +	return clk_sel == AD7173_ADC_MODE_CLOCKSEL_INT_OUTPUT;
> +}
> +
> +static int ad7173_clk_output_prepare(struct clk_hw *hw)
> +{
> +	struct ad7173_state *st = clk_hw_to_ad7173(hw);
> +
> +	return ad7173_sel_clk(st, AD7173_ADC_MODE_CLOCKSEL_INT_OUTPUT);
> +}
> +
> +static void ad7173_clk_output_unprepare(struct clk_hw *hw)
> +{
> +	struct ad7173_state *st = clk_hw_to_ad7173(hw);
> +
> +	ad7173_sel_clk(st, AD7173_ADC_MODE_CLOCKSEL_INT);
> +}
> +
> +static const struct clk_ops ad7173_int_clk_ops = {
> +	.recalc_rate = ad7173_clk_recalc_rate,
> +	.is_enabled = ad7173_clk_output_is_enabled,
> +	.prepare = ad7173_clk_output_prepare,
> +	.unprepare = ad7173_clk_output_unprepare,
> +};
> +
> +static int ad7173_register_clk_provider(struct iio_dev *indio_dev)
> +{
> +	struct ad7173_state *st = iio_priv(indio_dev);
> +	struct device *dev = indio_dev->dev.parent;
> +	struct fwnode_handle *fwnode = dev_fwnode(dev);
> +	struct clk_init_data init = {};
> +	int ret;
> +
> +	if (!IS_ENABLED(CONFIG_COMMON_CLK))
> +		return 0;
> +
> +	init.name = fwnode_get_name(fwnode);
> +	init.ops = &ad7173_int_clk_ops;
> +
> +	st->int_clk_hw.init = &init;
> +	ret = devm_clk_hw_register(dev, &st->int_clk_hw);
> +	if (ret)
> +		return ret;
> +
> +	return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
> +					   &st->int_clk_hw);
> +}
> +
> +static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev)
> +{
> +	struct ad7173_channel *chans_st_arr, *chan_st_priv;
> +	struct ad7173_state *st = iio_priv(indio_dev);
> +	struct device *dev = indio_dev->dev.parent;
> +	struct iio_chan_spec *chan_arr, *chan;
> +	unsigned int ain[2], chan_index = 0;
> +	struct fwnode_handle *child;
> +	int ref_sel, ret;
> +
> +	if (st->info->has_temp) {
> +		chan_arr[chan_index] = ad7173_temp_iio_channel_template;
> +		chan_st_priv = &chans_st_arr[chan_index];
> +		chan_st_priv->ain =
> +			AD7173_CH_ADDRESS(chan_arr[chan_index].channel,
> chan_arr[chan_index].channel2);
> +		chan_st_priv->cfg.bipolar = false;
> +		chan_st_priv->cfg.input_buf = true;
> +		chan_st_priv->cfg.ref_sel = AD7173_SETUP_REF_SEL_INT_REF;
> +		st->adc_mode |= AD7173_ADC_MODE_REF_EN;
> +
> +		chan_index++;
> +	}
> +
> +	device_for_each_child_node(dev, child) {
> +		chan = &chan_arr[chan_index];
> +		chan_st_priv = &chans_st_arr[chan_index];
> +		ret = fwnode_property_read_u32_array(child, "diff-channels",
> +						     ain, ARRAY_SIZE(ain));
> +		if (ret) {
> +			fwnode_handle_put(child);
> +			return ret;
> +		}
> +
> +		if (ain[0] >= st->info->num_inputs ||
> +		    ain[1] >= st->info->num_inputs) {
> +			fwnode_handle_put(child);
> +			return dev_err_probe(dev, -EINVAL,
> +					     "Input pin number out of range
> for pair (%d %d).\n",
> +					     ain[0], ain[1]);
> +		}
> +
> +		ret = fwnode_property_match_property_string(child,
> +							    "adi,reference-
> select",
> +							   
> ad7173_ref_sel_str,
> +							   
> ARRAY_SIZE(ad7173_ref_sel_str));
> +		if (ret < 0)
> +			ref_sel = AD7173_SETUP_REF_SEL_INT_REF;
> +		else
> +			ref_sel = ret;
> +
> +		if (ref_sel == AD7173_SETUP_REF_SEL_EXT_REF2 &&
> +		    st->info->id != AD7173_ID) {
> +			fwnode_handle_put(child);
> +			return dev_err_probe(dev, -EINVAL, "External
> reference 2 is only available on ad7173-8\n");
> +		}
> +
> +		ret = ad7173_get_ref_voltage_milli(st, ref_sel);
> +		if (ret < 0) {
> +			fwnode_handle_put(child);
> +			return dev_err_probe(dev, ret,
> +					     "Cannot use reference %u\n",
> ref_sel);
> +		}
> +		if (ref_sel == AD7173_SETUP_REF_SEL_INT_REF)
> +			st->adc_mode |= AD7173_ADC_MODE_REF_EN;
> +		chan_st_priv->cfg.ref_sel = ref_sel;
> +
> +		*chan = ad7173_channel_template;
> +		chan->address = chan_index;
> +		chan->scan_index = chan_index;
> +		chan->channel = ain[0];
> +		chan->channel2 = ain[1];
> +		chan->differential = true;
> +
> +		chan_st_priv->ain = AD7173_CH_ADDRESS(ain[0], ain[1]);
> +		chan_st_priv->chan_reg = chan_index;
> +		chan_st_priv->cfg.input_buf = true;
> +		chan_st_priv->cfg.odr = 0;
> +
> +		chan_st_priv->cfg.bipolar = fwnode_property_read_bool(child,
> "bipolar");
> +		if (chan_st_priv->cfg.bipolar)
> +			chan->info_mask_separate |=
> BIT(IIO_CHAN_INFO_OFFSET);
> +
> +		chan_index++;
> +	}
> +	return 0;
> +}
> +
> +static int ad7173_fw_parse_device_config(struct iio_dev *indio_dev)
> +{
> +	struct ad7173_state *st = iio_priv(indio_dev);
> +	struct device *dev = indio_dev->dev.parent;
> +	unsigned int num_channels;
> +	int ret;
> +
> +	st->regulators[0].supply =
> ad7173_ref_sel_str[AD7173_SETUP_REF_SEL_EXT_REF];
> +	st->regulators[1].supply =
> ad7173_ref_sel_str[AD7173_SETUP_REF_SEL_EXT_REF2];
> +	st->regulators[2].supply =
> ad7173_ref_sel_str[AD7173_SETUP_REF_SEL_AVDD1_AVSS];
> +
> +	/*
> +	 * If a regulator is not available, it will be set to a dummy
> regulator.
> +	 * Each channel reference is checked with regulator_get_voltage()
> before
> +	 * setting attributes so if any channel uses a dummy supply the
> driver
> +	 * probe will fail.
> +	 */
> +	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(st->regulators),
> +				      st->regulators);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to get regulators\n");
> +
> +	ret = regulator_bulk_enable(ARRAY_SIZE(st->regulators), st-
> >regulators);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to enable
> regulators\n");
> +
> +	ret = devm_add_action_or_reset(dev, ad7173_disable_regulators, st);
> +	if (ret)
> +		return dev_err_probe(dev, ret,
> +				     "Failed to add regulators disable
> action\n");
> +
> +	ret = device_property_match_property_string(dev, "clock-names",
> +						    ad7173_clk_sel,
> +						   
> ARRAY_SIZE(ad7173_clk_sel));
> +	if (ret < 0) {
> +		st->adc_mode |= FIELD_PREP(AD7173_ADC_MODE_CLOCKSEL_MASK,
> AD7173_ADC_MODE_CLOCKSEL_INT);
> +		ad7173_register_clk_provider(indio_dev);
> +	} else {
> +		st->adc_mode |= FIELD_PREP(AD7173_ADC_MODE_CLOCKSEL_MASK,
> AD7173_ADC_MODE_CLOCKSEL_EXT + ret);
> +		st->ext_clk = devm_clk_get(dev, ad7173_clk_sel[ret]);
> +		if (IS_ERR(st->ext_clk))
> +			return dev_err_probe(dev, PTR_ERR(st->ext_clk),
> +					     "Failed to get external
> clock\n");
> +
> +		ret = clk_prepare_enable(st->ext_clk);
> +		if (ret)
> +			return dev_err_probe(dev, ret,
> +					     "Failed to enable external
> clock\n");
> +
> +		ret = devm_add_action_or_reset(dev,
> ad7173_clk_disable_unprepare,
> +					       st->ext_clk);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	ret = fwnode_irq_get_byname(dev_fwnode(dev), "rdy");
> +	if (ret < 0)
> +		return dev_err_probe(dev, ret, "Interrupt 'rdy' is
> required\n");
> +
> +	ad7173_sigma_delta_info.irq_line = ret;
> +
> +	num_channels = device_get_child_node_count(dev);
> +
> +	if (st->info->has_temp)
> +		num_channels++;
> +
> +	if (num_channels == 0)
> +		return dev_err_probe(dev, -ENODATA, "No channels
> specified\n");
> +	st->num_channels = num_channels;
> +
> +	indio_dev->channels = devm_kcalloc(dev, sizeof(*indio_dev->channels),
> +					   num_channels, GFP_KERNEL);
> +	if (!indio_dev->channels)
> +		return -ENOMEM;
> +
> +	st->channels = devm_kcalloc(dev, num_channels, sizeof(*st->channels),
> +				    GFP_KERNEL);
> +	if (!st->channels)
> +		return -ENOMEM;
> +
> +	indio_dev->num_channels = num_channels;
> +	return ad7173_fw_parse_channel_config(indio_dev);
> +}
> +
> +static int ad7173_probe(struct spi_device *spi)
> +{
> +	struct device *dev = &spi->dev;
> +	struct ad7173_state *st;
> +	struct iio_dev *indio_dev;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	st = iio_priv(indio_dev);
> +	st->info = spi_get_device_match_data(spi);
> +	if (!st->info)
> +		return -ENODEV;
> +
> +	ida_init(&st->cfg_slots_status);
> +	ret = devm_add_action_or_reset(dev, ad7173_ida_destroy, st);
> +	if (ret)
> +		return ret;
> +
> +	indio_dev->name = st->info->name;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->info = &ad7173_info;
> +
> +	spi->mode = SPI_MODE_3;
> +	spi_setup(spi);
> +
> +	ad7173_sigma_delta_info.num_slots = st->info->num_configs;
> +	ret = ad_sd_init(&st->sd, indio_dev, spi, &ad7173_sigma_delta_info);
> +	if (ret)
> +		return ret;
> +
> +	ret = ad7173_fw_parse_device_config(indio_dev);
> +	if (ret)
> +		return ret;
> +
> +	ret = devm_ad_sd_setup_buffer_and_trigger(dev, indio_dev);
> +	if (ret)
> +		return ret;
> +
> +	ret = ad7173_setup(indio_dev);
> +	if (ret)
> +		return ret;
> +
> +	ret = devm_iio_device_register(dev, indio_dev);
> +	if (ret)
> +		return ret;
> +
> +	if (IS_ENABLED(CONFIG_GPIOLIB))
> +		return ad7173_gpio_init(st);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id ad7173_of_match[] = {
> +	{ .compatible = "adi,ad7172-2",
> +	  .data = &ad7173_device_info[ID_AD7172_2]},
> +	{ .compatible = "adi,ad7173-8",
> +	  .data = &ad7173_device_info[ID_AD7173_8]},
> +	{ .compatible = "adi,ad7175-2",
> +	  .data = &ad7173_device_info[ID_AD7175_2]},
> +	{ .compatible = "adi,ad7176-2",
> +	  .data = &ad7173_device_info[ID_AD7176_2]},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, ad7173_of_match);
> +
> +static const struct spi_device_id ad7173_id_table[] = {
> +	{ "ad7172-2", (kernel_ulong_t)&ad7173_device_info[ID_AD7172_2]},
> +	{ "ad7173-8", (kernel_ulong_t)&ad7173_device_info[ID_AD7173_8]},
> +	{ "ad7175-2", (kernel_ulong_t)&ad7173_device_info[ID_AD7175_2]},
> +	{ "ad7176-2", (kernel_ulong_t)&ad7173_device_info[ID_AD7176_2]},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(spi, ad7173_id_table);
> +
> +static struct spi_driver ad7173_driver = {
> +	.driver = {
> +		.name	= "ad7173",
> +		.of_match_table = ad7173_of_match,
> +	},
> +	.probe		= ad7173_probe,
> +	.id_table	= ad7173_id_table,
> +};
> +module_spi_driver(ad7173_driver);
> +
> +MODULE_AUTHOR("Lars-Peter Clausen <lars@metafo.de>");
> +MODULE_AUTHOR("Dumitru Ceclan <dumitru.ceclan@analog.com>");
> +MODULE_DESCRIPTION("Analog Devices AD7172/AD7173/AD7175/AD7176 ADC driver");
> +MODULE_LICENSE("GPL");
diff mbox series

Patch

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 3b73c509bd68..c32054afdfc4 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -70,6 +70,23 @@  config AD7124
 	  To compile this driver as a module, choose M here: the module will be
 	  called ad7124.
 
+config AD7173
+	tristate "Analog Devices AD7173 driver"
+	depends on SPI_MASTER
+	select AD_SIGMA_DELTA
+	select GPIO_REGMAP if GPIOLIB
+	select REGMAP_SPI if GPIOLIB
+	help
+	  Say yes here to build support for Analog Devices AD7173 and similar ADC
+	  Currently supported models:
+	   - AD7172-2
+	   - AD7173-8
+	   - AD7175-2
+	   - AD7176-2
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ad7173.
+
 config AD7192
 	tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver"
 	depends on SPI
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index d2fda54a3259..dd4210a3634f 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -11,6 +11,7 @@  obj-$(CONFIG_AD7091R) += ad7091r-base.o
 obj-$(CONFIG_AD7091R5) += ad7091r5.o
 obj-$(CONFIG_AD7091R8) += ad7091r8.o
 obj-$(CONFIG_AD7124) += ad7124.o
+obj-$(CONFIG_AD7173) += ad7173.o
 obj-$(CONFIG_AD7192) += ad7192.o
 obj-$(CONFIG_AD7266) += ad7266.o
 obj-$(CONFIG_AD7280) += ad7280a.o
diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c
new file mode 100644
index 000000000000..3dde473cf859
--- /dev/null
+++ b/drivers/iio/adc/ad7173.c
@@ -0,0 +1,1104 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * AD7172-2/AD7173-8/AD7175-2/AD7176-2 SPI ADC driver
+ * Copyright (C) 2015, 2024 Analog Devices, Inc.
+ */
+
+#include <linux/array_size.h>
+#include <linux/bitfield.h>
+#include <linux/bitmap.h>
+#include <linux/container_of.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/regmap.h>
+#include <linux/idr.h>
+#include <linux/interrupt.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+#include <linux/units.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/adc/ad_sigma_delta.h>
+
+#define AD7173_REG_COMMS		0x00
+#define AD7173_REG_ADC_MODE		0x01
+#define AD7173_REG_INTERFACE_MODE	0x02
+#define AD7173_REG_CRC			0x03
+#define AD7173_REG_DATA			0x04
+#define AD7173_REG_GPIO			0x06
+#define AD7173_REG_ID			0x07
+#define AD7173_REG_CH(x)		(0x10 + (x))
+#define AD7173_REG_SETUP(x)		(0x20 + (x))
+#define AD7173_REG_FILTER(x)		(0x28 + (x))
+#define AD7173_REG_OFFSET(x)		(0x30 + (x))
+#define AD7173_REG_GAIN(x)		(0x38 + (x))
+
+#define AD7173_RESET_LENGTH		BITS_TO_BYTES(64)
+
+#define AD7173_CH_ENABLE		BIT(15)
+#define AD7173_CH_SETUP_SEL_MASK	GENMASK(14, 12)
+#define AD7173_CH_SETUP_AINPOS_MASK	GENMASK(9, 5)
+#define AD7173_CH_SETUP_AINNEG_MASK	GENMASK(4, 0)
+
+#define AD7173_CH_ADDRESS(pos, neg) \
+	(FIELD_PREP(AD7173_CH_SETUP_AINPOS_MASK, pos) | \
+	 FIELD_PREP(AD7173_CH_SETUP_AINNEG_MASK, neg))
+#define AD7173_AIN_TEMP_POS	17
+#define AD7173_AIN_TEMP_NEG	18
+
+#define AD7172_ID			0x00d0
+#define AD7173_ID			0x30d0
+#define AD7175_ID			0x0cd0
+#define AD7176_ID			0x0c90
+#define AD7173_ID_MASK			GENMASK(15, 4)
+
+#define AD7173_ADC_MODE_REF_EN		BIT(15)
+#define AD7173_ADC_MODE_SING_CYC	BIT(13)
+#define AD7173_ADC_MODE_MODE_MASK	GENMASK(6, 4)
+#define AD7173_ADC_MODE_CLOCKSEL_MASK	GENMASK(3, 2)
+#define AD7173_ADC_MODE_CLOCKSEL_INT		0x0
+#define AD7173_ADC_MODE_CLOCKSEL_INT_OUTPUT	0x1
+#define AD7173_ADC_MODE_CLOCKSEL_EXT		0x2
+#define AD7173_ADC_MODE_CLOCKSEL_XTAL		0x3
+
+#define AD7173_GPIO_PDSW	BIT(14)
+#define AD7173_GPIO_OP_EN2_3	BIT(13)
+#define AD7173_GPIO_MUX_IO	BIT(12)
+#define AD7173_GPIO_SYNC_EN	BIT(11)
+#define AD7173_GPIO_ERR_EN	BIT(10)
+#define AD7173_GPIO_ERR_DAT	BIT(9)
+#define AD7173_GPIO_GP_DATA3	BIT(7)
+#define AD7173_GPIO_GP_DATA2	BIT(6)
+#define AD7173_GPIO_IP_EN1	BIT(5)
+#define AD7173_GPIO_IP_EN0	BIT(4)
+#define AD7173_GPIO_OP_EN1	BIT(3)
+#define AD7173_GPIO_OP_EN0	BIT(2)
+#define AD7173_GPIO_GP_DATA1	BIT(1)
+#define AD7173_GPIO_GP_DATA0	BIT(0)
+
+#define AD7173_GPO12_DATA(x)	BIT((x) + 0)
+#define AD7173_GPO23_DATA(x)	BIT((x) + 4)
+#define AD7173_GPO_DATA(x)	((x) < 2 ? AD7173_GPO12_DATA(x) : AD7173_GPO23_DATA(x))
+
+#define AD7173_INTERFACE_DATA_STAT	BIT(6)
+#define AD7173_INTERFACE_DATA_STAT_EN(x) \
+	FIELD_PREP(AD7173_INTERFACE_DATA_STAT, x)
+
+#define AD7173_SETUP_BIPOLAR		BIT(12)
+#define AD7173_SETUP_AREF_BUF_MASK	GENMASK(11, 10)
+#define AD7173_SETUP_AIN_BUF_MASK	GENMASK(9, 8)
+
+#define AD7173_SETUP_REF_SEL_MASK	GENMASK(5, 4)
+#define AD7173_SETUP_REF_SEL_AVDD1_AVSS	0x3
+#define AD7173_SETUP_REF_SEL_INT_REF	0x2
+#define AD7173_SETUP_REF_SEL_EXT_REF2	0x1
+#define AD7173_SETUP_REF_SEL_EXT_REF	0x0
+#define AD7173_VOLTAGE_INT_REF_uV	2500000
+#define AD7173_TEMP_SENSIIVITY_uV_per_C	477
+
+#define AD7173_FILTER_ODR0_MASK		GENMASK(5, 0)
+#define AD7173_MAX_CONFIGS		8
+
+enum ad7173_ids {
+	ID_AD7172_2,
+	ID_AD7173_8,
+	ID_AD7175_2,
+	ID_AD7176_2,
+};
+
+struct ad7173_device_info {
+	const unsigned int *sinc5_data_rates;
+	unsigned int num_sinc5_data_rates;
+	unsigned int num_channels;
+	unsigned int num_configs;
+	unsigned int num_inputs;
+	unsigned int clock;
+	unsigned int id;
+	char *name;
+	bool has_temp;
+	u8 num_gpios;
+};
+
+struct ad7173_channel_config {
+	u8 cfg_slot;
+	bool live;
+
+	/* Following fields are used to compare equality. */
+	struct_group(config_props,
+		bool bipolar;
+		bool input_buf;
+		u8 odr;
+		u8 ref_sel;
+	);
+};
+
+struct ad7173_channel {
+	unsigned int chan_reg;
+	unsigned int ain;
+	struct ad7173_channel_config cfg;
+};
+
+struct ad7173_state {
+	struct ad_sigma_delta sd;
+	const struct ad7173_device_info *info;
+	struct ad7173_channel *channels;
+	struct regulator_bulk_data regulators[3];
+	unsigned int adc_mode;
+	unsigned int interface_mode;
+	unsigned int num_channels;
+	struct ida cfg_slots_status;
+	unsigned long long config_usage_counter;
+	unsigned long long *config_cnts;
+	struct clk *ext_clk;
+	struct clk_hw int_clk_hw;
+#if IS_ENABLED(CONFIG_GPIOLIB)
+	struct regmap *reg_gpiocon_regmap;
+	struct gpio_regmap *gpio_regmap;
+#endif
+};
+
+static const unsigned int ad7173_sinc5_data_rates[] = {
+	6211000, 6211000, 6211000, 6211000, 6211000, 6211000, 5181000, 4444000,	/*  0-7  */
+	3115000, 2597000, 1007000, 503800,  381000,  200300,  100500,  59520,	/*  8-15 */
+	49680,	 20010,	  16333,   10000,   5000,    2500,    1250,		/* 16-22 */
+};
+
+static const unsigned int ad7175_sinc5_data_rates[] = {
+	50000000, 41667000, 31250000, 27778000,	/*  0-3  */
+	20833000, 17857000, 12500000, 10000000,	/*  4-7  */
+	5000000,  2500000,  1000000,  500000,	/*  8-11 */
+	397500,   200000,   100000,   59920,	/* 12-15 */
+	49960,    20000,    16666,    10000,	/* 16-19 */
+	5000,					/* 20    */
+};
+
+static const struct ad7173_device_info ad7173_device_info[] = {
+	[ID_AD7172_2] = {
+		.name = "ad7172-2",
+		.id = AD7172_ID,
+		.num_inputs = 5,
+		.num_channels = 4,
+		.num_configs = 4,
+		.num_gpios = 2,
+		.has_temp = true,
+		.clock = 2 * HZ_PER_MHZ,
+		.sinc5_data_rates = ad7173_sinc5_data_rates,
+		.num_sinc5_data_rates = ARRAY_SIZE(ad7173_sinc5_data_rates),
+	},
+	[ID_AD7173_8] = {
+		.name = "ad7173-8",
+		.id = AD7173_ID,
+		.num_inputs = 17,
+		.num_channels = 16,
+		.num_configs = 8,
+		.num_gpios = 4,
+		.has_temp = true,
+		.clock = 2 * HZ_PER_MHZ,
+		.sinc5_data_rates = ad7173_sinc5_data_rates,
+		.num_sinc5_data_rates = ARRAY_SIZE(ad7173_sinc5_data_rates),
+	},
+	[ID_AD7175_2] = {
+		.name = "ad7175-2",
+		.id = AD7175_ID,
+		.num_inputs = 5,
+		.num_channels = 4,
+		.num_configs = 4,
+		.num_gpios = 2,
+		.has_temp = true,
+		.clock = 16 * HZ_PER_MHZ,
+		.sinc5_data_rates = ad7175_sinc5_data_rates,
+		.num_sinc5_data_rates = ARRAY_SIZE(ad7175_sinc5_data_rates),
+	},
+	[ID_AD7176_2] = {
+		.name = "ad7176-2",
+		.id = AD7176_ID,
+		.num_inputs = 5,
+		.num_channels = 4,
+		.num_configs = 4,
+		.num_gpios = 2,
+		.has_temp = false,
+		.clock = 16 * HZ_PER_MHZ,
+		.sinc5_data_rates = ad7175_sinc5_data_rates,
+		.num_sinc5_data_rates = ARRAY_SIZE(ad7175_sinc5_data_rates),
+	},
+};
+
+static const char *const ad7173_ref_sel_str[] = {
+	[AD7173_SETUP_REF_SEL_EXT_REF]    = "vref",
+	[AD7173_SETUP_REF_SEL_EXT_REF2]   = "vref2",
+	[AD7173_SETUP_REF_SEL_INT_REF]    = "refout-avss",
+	[AD7173_SETUP_REF_SEL_AVDD1_AVSS] = "avdd",
+};
+
+static const char *const ad7173_clk_sel[] = {
+	"ext-clk", "xtal"
+};
+
+#if IS_ENABLED(CONFIG_GPIOLIB)
+
+static const struct regmap_range ad7173_range_gpio[] = {
+	regmap_reg_range(AD7173_REG_GPIO, AD7173_REG_GPIO),
+};
+
+static const struct regmap_access_table ad7173_access_table = {
+	.yes_ranges = ad7173_range_gpio,
+	.n_yes_ranges = ARRAY_SIZE(ad7173_range_gpio),
+};
+
+static const struct regmap_config ad7173_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 16,
+	.rd_table = &ad7173_access_table,
+	.wr_table = &ad7173_access_table,
+	.read_flag_mask = BIT(6),
+};
+
+static int ad7173_mask_xlate(struct gpio_regmap *gpio, unsigned int base,
+			     unsigned int offset, unsigned int *reg,
+			     unsigned int *mask)
+{
+	*mask = AD7173_GPO_DATA(offset);
+	*reg = base;
+	return 0;
+}
+
+static void ad7173_gpio_disable(void *data)
+{
+	struct ad7173_state *st = data;
+	unsigned int mask;
+
+	mask = AD7173_GPIO_OP_EN0 | AD7173_GPIO_OP_EN1 | AD7173_GPIO_OP_EN2_3;
+	regmap_update_bits(st->reg_gpiocon_regmap, AD7173_REG_GPIO, mask, ~mask);
+}
+
+static int ad7173_gpio_init(struct ad7173_state *st)
+{
+	struct gpio_regmap_config gpio_regmap = {};
+	struct device *dev = &st->sd.spi->dev;
+	unsigned int mask;
+	int ret;
+
+	st->reg_gpiocon_regmap = devm_regmap_init_spi(st->sd.spi, &ad7173_regmap_config);
+	ret = PTR_ERR_OR_ZERO(st->reg_gpiocon_regmap);
+	if (ret)
+		return dev_err_probe(dev, ret, "Unable to init regmap\n");
+
+	mask = AD7173_GPIO_OP_EN0 | AD7173_GPIO_OP_EN1 | AD7173_GPIO_OP_EN2_3;
+	regmap_update_bits(st->reg_gpiocon_regmap, AD7173_REG_GPIO, mask, mask);
+
+	ret = devm_add_action_or_reset(dev, ad7173_gpio_disable, st);
+	if (ret)
+		return ret;
+
+	gpio_regmap.parent = dev;
+	gpio_regmap.regmap = st->reg_gpiocon_regmap;
+	gpio_regmap.ngpio = st->info->num_gpios;
+	gpio_regmap.reg_set_base = AD7173_REG_GPIO;
+	gpio_regmap.reg_mask_xlate = ad7173_mask_xlate;
+
+	st->gpio_regmap = devm_gpio_regmap_register(dev, &gpio_regmap);
+	ret = PTR_ERR_OR_ZERO(st->gpio_regmap);
+	if (ret)
+		return dev_err_probe(dev, ret, "Unable to init gpio-regmap\n");
+
+	return 0;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+static struct ad7173_state *ad_sigma_delta_to_ad7173(struct ad_sigma_delta *sd)
+{
+	return container_of(sd, struct ad7173_state, sd);
+}
+
+static struct ad7173_state *clk_hw_to_ad7173(struct clk_hw *hw)
+{
+	return container_of(hw, struct ad7173_state, int_clk_hw);
+}
+
+static void ad7173_ida_destroy(void *data)
+{
+	struct ad7173_state *st = data;
+
+	ida_destroy(&st->cfg_slots_status);
+}
+
+static void ad7173_reset_usage_cnts(struct ad7173_state *st)
+{
+	memset64(st->config_cnts, 0, st->info->num_configs);
+	st->config_usage_counter = 0;
+}
+
+static struct ad7173_channel_config *
+ad7173_find_live_config(struct ad7173_state *st, struct ad7173_channel_config *cfg)
+{
+	struct ad7173_channel_config *cfg_aux;
+	ptrdiff_t cmp_size;
+	int i;
+
+	cmp_size = sizeof_field(struct ad7173_channel_config, config_props);
+	for (i = 0; i < st->num_channels; i++) {
+		cfg_aux = &st->channels[i].cfg;
+
+		if (cfg_aux->live &&
+		    !memcmp(&cfg->config_props, &cfg_aux->config_props, cmp_size))
+			return cfg_aux;
+	}
+	return NULL;
+}
+
+/* Could be replaced with a generic LRU implementation */
+static int ad7173_free_config_slot_lru(struct ad7173_state *st)
+{
+	int i, lru_position = 0;
+
+	for (i = 1; i < st->info->num_configs; i++)
+		if (st->config_cnts[i] < st->config_cnts[lru_position])
+			lru_position = i;
+
+	for (i = 0; i < st->num_channels; i++)
+		if (st->channels[i].cfg.cfg_slot == lru_position)
+			st->channels[i].cfg.live = false;
+
+	ida_free(&st->cfg_slots_status, lru_position);
+	return ida_alloc(&st->cfg_slots_status, GFP_KERNEL);
+}
+
+/* Could be replaced with a generic LRU implementation */
+static int ad7173_load_config(struct ad7173_state *st,
+			      struct ad7173_channel_config *cfg)
+{
+	unsigned int config;
+	int free_cfg_slot, ret;
+
+	free_cfg_slot = ida_alloc_range(&st->cfg_slots_status, 0,
+					st->info->num_configs - 1, GFP_KERNEL);
+	if (free_cfg_slot < 0)
+		free_cfg_slot = ad7173_free_config_slot_lru(st);
+
+	cfg->cfg_slot = free_cfg_slot;
+	config = FIELD_PREP(AD7173_SETUP_REF_SEL_MASK, cfg->ref_sel);
+
+	if (cfg->bipolar)
+		config |= AD7173_SETUP_BIPOLAR;
+
+	if (cfg->input_buf)
+		config |= AD7173_SETUP_AIN_BUF_MASK;
+
+	ret = ad_sd_write_reg(&st->sd, AD7173_REG_SETUP(free_cfg_slot), 2, config);
+	if (ret)
+		return ret;
+
+	return ad_sd_write_reg(&st->sd, AD7173_REG_FILTER(free_cfg_slot), 2,
+			       AD7173_FILTER_ODR0_MASK & cfg->odr);
+}
+
+static int ad7173_config_channel(struct ad7173_state *st, int addr)
+{
+	struct ad7173_channel_config *cfg = &st->channels[addr].cfg;
+	struct ad7173_channel_config *live_cfg;
+	int ret;
+
+	if (!cfg->live) {
+		live_cfg = ad7173_find_live_config(st, cfg);
+		if (live_cfg) {
+			cfg->cfg_slot = live_cfg->cfg_slot;
+		} else {
+			ret = ad7173_load_config(st, cfg);
+			if (ret)
+				return ret;
+			cfg->live = true;
+		}
+	}
+
+	if (st->config_usage_counter == U64_MAX)
+		ad7173_reset_usage_cnts(st);
+
+	st->config_usage_counter++;
+	st->config_cnts[cfg->cfg_slot] = st->config_usage_counter;
+
+	return 0;
+}
+
+static int ad7173_set_channel(struct ad_sigma_delta *sd, unsigned int channel)
+{
+	struct ad7173_state *st = ad_sigma_delta_to_ad7173(sd);
+	unsigned int val;
+	int ret;
+
+	ret = ad7173_config_channel(st, channel);
+	if (ret)
+		return ret;
+
+	val = AD7173_CH_ENABLE |
+	      FIELD_PREP(AD7173_CH_SETUP_SEL_MASK, st->channels[channel].cfg.cfg_slot) |
+	      st->channels[channel].ain;
+
+	return ad_sd_write_reg(&st->sd, AD7173_REG_CH(channel), 2, val);
+}
+
+static int ad7173_set_mode(struct ad_sigma_delta *sd,
+			   enum ad_sigma_delta_mode mode)
+{
+	struct ad7173_state *st = ad_sigma_delta_to_ad7173(sd);
+
+	st->adc_mode &= ~AD7173_ADC_MODE_MODE_MASK;
+	st->adc_mode |= FIELD_PREP(AD7173_ADC_MODE_MODE_MASK, mode);
+
+	return ad_sd_write_reg(&st->sd, AD7173_REG_ADC_MODE, 2, st->adc_mode);
+}
+
+static int ad7173_append_status(struct ad_sigma_delta *sd, bool append)
+{
+	struct ad7173_state *st = ad_sigma_delta_to_ad7173(sd);
+	unsigned int interface_mode = st->interface_mode;
+	int ret;
+
+	interface_mode |= AD7173_INTERFACE_DATA_STAT_EN(append);
+	ret = ad_sd_write_reg(&st->sd, AD7173_REG_INTERFACE_MODE, 2, interface_mode);
+	if (ret)
+		return ret;
+
+	st->interface_mode = interface_mode;
+
+	return 0;
+}
+
+static int ad7173_disable_all(struct ad_sigma_delta *sd)
+{
+	struct ad7173_state *st = ad_sigma_delta_to_ad7173(sd);
+	int ret;
+	int i;
+
+	for (i = 0; i < st->num_channels; i++) {
+		ret = ad_sd_write_reg(sd, AD7173_REG_CH(i), 2, 0);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static struct ad_sigma_delta_info ad7173_sigma_delta_info = {
+	.set_channel = ad7173_set_channel,
+	.append_status = ad7173_append_status,
+	.disable_all = ad7173_disable_all,
+	.set_mode = ad7173_set_mode,
+	.has_registers = true,
+	.addr_shift = 0,
+	.read_mask = BIT(6),
+	.status_ch_mask = GENMASK(3, 0),
+	.data_reg = AD7173_REG_DATA,
+};
+
+static int ad7173_setup(struct iio_dev *indio_dev)
+{
+	struct ad7173_state *st = iio_priv(indio_dev);
+	struct device *dev = &st->sd.spi->dev;
+	u8 buf[AD7173_RESET_LENGTH];
+	unsigned int id;
+	int ret;
+
+	/* reset the serial interface */
+	memset(buf, 0xff, AD7173_RESET_LENGTH);
+	ret = spi_write_then_read(st->sd.spi, buf, sizeof(buf), NULL, 0);
+	if (ret < 0)
+		return ret;
+
+	/* datasheet recommends a delay of at least 500us after reset */
+	fsleep(500);
+
+	ret = ad_sd_read_reg(&st->sd, AD7173_REG_ID, 2, &id);
+	if (ret)
+		return ret;
+
+	id &= AD7173_ID_MASK;
+	if (id != st->info->id)
+		dev_warn(dev, "Unexpected device id: 0x%04X, expected: 0x%04X\n",
+			 id, st->info->id);
+
+	st->adc_mode |= AD7173_ADC_MODE_SING_CYC;
+	st->interface_mode = 0x0;
+
+	st->config_usage_counter = 0;
+	st->config_cnts = devm_kcalloc(dev, st->info->num_configs,
+				       sizeof(*st->config_cnts), GFP_KERNEL);
+	if (!st->config_cnts)
+		return -ENOMEM;
+
+	/* All channels are enabled by default after a reset */
+	return ad7173_disable_all(&st->sd);
+}
+
+static unsigned int ad7173_get_ref_voltage_milli(struct ad7173_state *st,
+						 u8 reference_select)
+{
+	int vref;
+
+	switch (reference_select) {
+	case AD7173_SETUP_REF_SEL_EXT_REF:
+		vref = regulator_get_voltage(st->regulators[0].consumer);
+		break;
+
+	case AD7173_SETUP_REF_SEL_EXT_REF2:
+		vref = regulator_get_voltage(st->regulators[1].consumer);
+		break;
+
+	case AD7173_SETUP_REF_SEL_INT_REF:
+		vref = AD7173_VOLTAGE_INT_REF_uV;
+		break;
+
+	case AD7173_SETUP_REF_SEL_AVDD1_AVSS:
+		vref = regulator_get_voltage(st->regulators[2].consumer);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if (vref < 0)
+		return vref;
+
+	return vref / (MICRO / MILLI);
+}
+
+static int ad7173_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long info)
+{
+	struct ad7173_state *st = iio_priv(indio_dev);
+	struct ad7173_channel *ch = &st->channels[chan->address];
+	unsigned int reg;
+	u64 temp;
+	int ret;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		ret = ad_sigma_delta_single_conversion(indio_dev, chan, val);
+		if (ret < 0)
+			return ret;
+
+		/* disable channel after single conversion */
+		ret = ad_sd_write_reg(&st->sd, AD7173_REG_CH(chan->address), 2, 0);
+		if (ret < 0)
+			return ret;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		if (chan->type == IIO_TEMP) {
+			temp = AD7173_VOLTAGE_INT_REF_uV * MILLI;
+			temp /= AD7173_TEMP_SENSIIVITY_uV_per_C;
+			*val = temp;
+			*val2 = chan->scan_type.realbits;
+		} else {
+			*val = ad7173_get_ref_voltage_milli(st, ch->cfg.ref_sel);
+			*val2 = chan->scan_type.realbits - !!(ch->cfg.bipolar);
+		}
+		return IIO_VAL_FRACTIONAL_LOG2;
+	case IIO_CHAN_INFO_OFFSET:
+		if (chan->type == IIO_TEMP) {
+			/* 0 Kelvin -> raw sample */
+			temp   = -ABSOLUTE_ZERO_MILLICELSIUS;
+			temp  *= AD7173_TEMP_SENSIIVITY_uV_per_C;
+			temp <<= chan->scan_type.realbits;
+			temp   = DIV_U64_ROUND_CLOSEST(temp,
+						       AD7173_VOLTAGE_INT_REF_uV *
+						       MILLI);
+			*val   = -temp;
+		} else {
+			*val = -BIT(chan->scan_type.realbits - 1);
+		}
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		reg = st->channels[chan->address].cfg.odr;
+
+		*val = st->info->sinc5_data_rates[reg] / MILLI;
+		*val2 = (st->info->sinc5_data_rates[reg] % MILLI) * (MICRO / MILLI);
+
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad7173_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long info)
+{
+	struct ad7173_state *st = iio_priv(indio_dev);
+	struct ad7173_channel_config *cfg;
+	unsigned int freq, i, reg;
+	int ret;
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+
+	switch (info) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		freq = val * MILLI + val2 / MILLI;
+		for (i = 0; i < st->info->num_sinc5_data_rates - 1; i++)
+			if (freq >= st->info->sinc5_data_rates[i])
+				break;
+
+		cfg = &st->channels[chan->address].cfg;
+		cfg->odr = i;
+
+		if (!cfg->live)
+			break;
+
+		ret = ad_sd_read_reg(&st->sd, AD7173_REG_FILTER(cfg->cfg_slot), 2, &reg);
+		if (ret)
+			break;
+		reg &= ~AD7173_FILTER_ODR0_MASK;
+		reg |= FIELD_PREP(AD7173_FILTER_ODR0_MASK, i);
+		ret = ad_sd_write_reg(&st->sd, AD7173_REG_FILTER(cfg->cfg_slot), 2, reg);
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	iio_device_release_direct_mode(indio_dev);
+	return ret;
+}
+
+static int ad7173_update_scan_mode(struct iio_dev *indio_dev,
+				   const unsigned long *scan_mask)
+{
+	struct ad7173_state *st = iio_priv(indio_dev);
+	int i, ret;
+
+	for (i = 0; i < indio_dev->num_channels; i++) {
+		if (test_bit(i, scan_mask))
+			ret = ad7173_set_channel(&st->sd, i);
+		else
+			ret = ad_sd_write_reg(&st->sd, AD7173_REG_CH(i), 2, 0);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int ad7173_debug_reg_access(struct iio_dev *indio_dev, unsigned int reg,
+				   unsigned int writeval, unsigned int *readval)
+{
+	struct ad7173_state *st = iio_priv(indio_dev);
+	u8 reg_size;
+
+	if (reg == AD7173_REG_COMMS)
+		reg_size = 1;
+	else if (reg == AD7173_REG_CRC || reg == AD7173_REG_DATA ||
+		 reg >= AD7173_REG_OFFSET(0))
+		reg_size = 3;
+	else
+		reg_size = 2;
+
+	if (readval)
+		return ad_sd_read_reg(&st->sd, reg, reg_size, readval);
+
+	return ad_sd_write_reg(&st->sd, reg, reg_size, writeval);
+}
+
+static const struct iio_info ad7173_info = {
+	.read_raw = &ad7173_read_raw,
+	.write_raw = &ad7173_write_raw,
+	.debugfs_reg_access = &ad7173_debug_reg_access,
+	.validate_trigger = ad_sd_validate_trigger,
+	.update_scan_mode = ad7173_update_scan_mode,
+};
+
+static const struct iio_chan_spec ad7173_channel_template = {
+	.type = IIO_VOLTAGE,
+	.indexed = 1,
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_SCALE),
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+	.scan_type = {
+		.sign = 'u',
+		.realbits = 24,
+		.storagebits = 32,
+		.endianness = IIO_BE,
+	},
+};
+
+static const struct iio_chan_spec ad7173_temp_iio_channel_template = {
+	.type = IIO_TEMP,
+	.indexed = 1,
+	.channel = AD7173_AIN_TEMP_POS,
+	.channel2 = AD7173_AIN_TEMP_NEG,
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+	.scan_type = {
+		.sign = 'u',
+		.realbits = 24,
+		.storagebits = 32,
+		.endianness = IIO_BE,
+	},
+};
+
+static void ad7173_disable_regulators(void *data)
+{
+	struct ad7173_state *st = data;
+
+	regulator_bulk_disable(ARRAY_SIZE(st->regulators), st->regulators);
+}
+
+static void ad7173_clk_disable_unprepare(void *clk)
+{
+	clk_disable_unprepare(clk);
+}
+
+static unsigned long ad7173_sel_clk(struct ad7173_state *st,
+				    unsigned int clk_sel)
+{
+	int ret;
+
+	st->adc_mode &= !AD7173_ADC_MODE_CLOCKSEL_MASK;
+	st->adc_mode |= FIELD_PREP(AD7173_ADC_MODE_CLOCKSEL_MASK, clk_sel);
+	ret = ad_sd_write_reg(&st->sd, AD7173_REG_ADC_MODE, 0x2, st->adc_mode);
+
+	return ret;
+}
+
+static unsigned long ad7173_clk_recalc_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct ad7173_state *st = clk_hw_to_ad7173(hw);
+
+	return st->info->clock / HZ_PER_KHZ;
+}
+
+static int ad7173_clk_output_is_enabled(struct clk_hw *hw)
+{
+	struct ad7173_state *st = clk_hw_to_ad7173(hw);
+	u32 clk_sel;
+
+	clk_sel = FIELD_GET(AD7173_ADC_MODE_CLOCKSEL_MASK, st->adc_mode);
+	return clk_sel == AD7173_ADC_MODE_CLOCKSEL_INT_OUTPUT;
+}
+
+static int ad7173_clk_output_prepare(struct clk_hw *hw)
+{
+	struct ad7173_state *st = clk_hw_to_ad7173(hw);
+
+	return ad7173_sel_clk(st, AD7173_ADC_MODE_CLOCKSEL_INT_OUTPUT);
+}
+
+static void ad7173_clk_output_unprepare(struct clk_hw *hw)
+{
+	struct ad7173_state *st = clk_hw_to_ad7173(hw);
+
+	ad7173_sel_clk(st, AD7173_ADC_MODE_CLOCKSEL_INT);
+}
+
+static const struct clk_ops ad7173_int_clk_ops = {
+	.recalc_rate = ad7173_clk_recalc_rate,
+	.is_enabled = ad7173_clk_output_is_enabled,
+	.prepare = ad7173_clk_output_prepare,
+	.unprepare = ad7173_clk_output_unprepare,
+};
+
+static int ad7173_register_clk_provider(struct iio_dev *indio_dev)
+{
+	struct ad7173_state *st = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
+	struct fwnode_handle *fwnode = dev_fwnode(dev);
+	struct clk_init_data init = {};
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_COMMON_CLK))
+		return 0;
+
+	init.name = fwnode_get_name(fwnode);
+	init.ops = &ad7173_int_clk_ops;
+
+	st->int_clk_hw.init = &init;
+	ret = devm_clk_hw_register(dev, &st->int_clk_hw);
+	if (ret)
+		return ret;
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
+					   &st->int_clk_hw);
+}
+
+static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev)
+{
+	struct ad7173_channel *chans_st_arr, *chan_st_priv;
+	struct ad7173_state *st = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
+	struct iio_chan_spec *chan_arr, *chan;
+	unsigned int ain[2], chan_index = 0;
+	struct fwnode_handle *child;
+	int ref_sel, ret;
+
+	if (st->info->has_temp) {
+		chan_arr[chan_index] = ad7173_temp_iio_channel_template;
+		chan_st_priv = &chans_st_arr[chan_index];
+		chan_st_priv->ain =
+			AD7173_CH_ADDRESS(chan_arr[chan_index].channel, chan_arr[chan_index].channel2);
+		chan_st_priv->cfg.bipolar = false;
+		chan_st_priv->cfg.input_buf = true;
+		chan_st_priv->cfg.ref_sel = AD7173_SETUP_REF_SEL_INT_REF;
+		st->adc_mode |= AD7173_ADC_MODE_REF_EN;
+
+		chan_index++;
+	}
+
+	device_for_each_child_node(dev, child) {
+		chan = &chan_arr[chan_index];
+		chan_st_priv = &chans_st_arr[chan_index];
+		ret = fwnode_property_read_u32_array(child, "diff-channels",
+						     ain, ARRAY_SIZE(ain));
+		if (ret) {
+			fwnode_handle_put(child);
+			return ret;
+		}
+
+		if (ain[0] >= st->info->num_inputs ||
+		    ain[1] >= st->info->num_inputs) {
+			fwnode_handle_put(child);
+			return dev_err_probe(dev, -EINVAL,
+					     "Input pin number out of range for pair (%d %d).\n",
+					     ain[0], ain[1]);
+		}
+
+		ret = fwnode_property_match_property_string(child,
+							    "adi,reference-select",
+							    ad7173_ref_sel_str,
+							    ARRAY_SIZE(ad7173_ref_sel_str));
+		if (ret < 0)
+			ref_sel = AD7173_SETUP_REF_SEL_INT_REF;
+		else
+			ref_sel = ret;
+
+		if (ref_sel == AD7173_SETUP_REF_SEL_EXT_REF2 &&
+		    st->info->id != AD7173_ID) {
+			fwnode_handle_put(child);
+			return dev_err_probe(dev, -EINVAL, "External reference 2 is only available on ad7173-8\n");
+		}
+
+		ret = ad7173_get_ref_voltage_milli(st, ref_sel);
+		if (ret < 0) {
+			fwnode_handle_put(child);
+			return dev_err_probe(dev, ret,
+					     "Cannot use reference %u\n", ref_sel);
+		}
+		if (ref_sel == AD7173_SETUP_REF_SEL_INT_REF)
+			st->adc_mode |= AD7173_ADC_MODE_REF_EN;
+		chan_st_priv->cfg.ref_sel = ref_sel;
+
+		*chan = ad7173_channel_template;
+		chan->address = chan_index;
+		chan->scan_index = chan_index;
+		chan->channel = ain[0];
+		chan->channel2 = ain[1];
+		chan->differential = true;
+
+		chan_st_priv->ain = AD7173_CH_ADDRESS(ain[0], ain[1]);
+		chan_st_priv->chan_reg = chan_index;
+		chan_st_priv->cfg.input_buf = true;
+		chan_st_priv->cfg.odr = 0;
+
+		chan_st_priv->cfg.bipolar = fwnode_property_read_bool(child, "bipolar");
+		if (chan_st_priv->cfg.bipolar)
+			chan->info_mask_separate |= BIT(IIO_CHAN_INFO_OFFSET);
+
+		chan_index++;
+	}
+	return 0;
+}
+
+static int ad7173_fw_parse_device_config(struct iio_dev *indio_dev)
+{
+	struct ad7173_state *st = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
+	unsigned int num_channels;
+	int ret;
+
+	st->regulators[0].supply = ad7173_ref_sel_str[AD7173_SETUP_REF_SEL_EXT_REF];
+	st->regulators[1].supply = ad7173_ref_sel_str[AD7173_SETUP_REF_SEL_EXT_REF2];
+	st->regulators[2].supply = ad7173_ref_sel_str[AD7173_SETUP_REF_SEL_AVDD1_AVSS];
+
+	/*
+	 * If a regulator is not available, it will be set to a dummy regulator.
+	 * Each channel reference is checked with regulator_get_voltage() before
+	 * setting attributes so if any channel uses a dummy supply the driver
+	 * probe will fail.
+	 */
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(st->regulators),
+				      st->regulators);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(st->regulators), st->regulators);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to enable regulators\n");
+
+	ret = devm_add_action_or_reset(dev, ad7173_disable_regulators, st);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to add regulators disable action\n");
+
+	ret = device_property_match_property_string(dev, "clock-names",
+						    ad7173_clk_sel,
+						    ARRAY_SIZE(ad7173_clk_sel));
+	if (ret < 0) {
+		st->adc_mode |= FIELD_PREP(AD7173_ADC_MODE_CLOCKSEL_MASK, AD7173_ADC_MODE_CLOCKSEL_INT);
+		ad7173_register_clk_provider(indio_dev);
+	} else {
+		st->adc_mode |= FIELD_PREP(AD7173_ADC_MODE_CLOCKSEL_MASK, AD7173_ADC_MODE_CLOCKSEL_EXT + ret);
+		st->ext_clk = devm_clk_get(dev, ad7173_clk_sel[ret]);
+		if (IS_ERR(st->ext_clk))
+			return dev_err_probe(dev, PTR_ERR(st->ext_clk),
+					     "Failed to get external clock\n");
+
+		ret = clk_prepare_enable(st->ext_clk);
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "Failed to enable external clock\n");
+
+		ret = devm_add_action_or_reset(dev, ad7173_clk_disable_unprepare,
+					       st->ext_clk);
+		if (ret)
+			return ret;
+	}
+
+	ret = fwnode_irq_get_byname(dev_fwnode(dev), "rdy");
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Interrupt 'rdy' is required\n");
+
+	ad7173_sigma_delta_info.irq_line = ret;
+
+	num_channels = device_get_child_node_count(dev);
+
+	if (st->info->has_temp)
+		num_channels++;
+
+	if (num_channels == 0)
+		return dev_err_probe(dev, -ENODATA, "No channels specified\n");
+	st->num_channels = num_channels;
+
+	indio_dev->channels = devm_kcalloc(dev, sizeof(*indio_dev->channels),
+					   num_channels, GFP_KERNEL);
+	if (!indio_dev->channels)
+		return -ENOMEM;
+
+	st->channels = devm_kcalloc(dev, num_channels, sizeof(*st->channels),
+				    GFP_KERNEL);
+	if (!st->channels)
+		return -ENOMEM;
+
+	indio_dev->num_channels = num_channels;
+	return ad7173_fw_parse_channel_config(indio_dev);
+}
+
+static int ad7173_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct ad7173_state *st;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+	st->info = spi_get_device_match_data(spi);
+	if (!st->info)
+		return -ENODEV;
+
+	ida_init(&st->cfg_slots_status);
+	ret = devm_add_action_or_reset(dev, ad7173_ida_destroy, st);
+	if (ret)
+		return ret;
+
+	indio_dev->name = st->info->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &ad7173_info;
+
+	spi->mode = SPI_MODE_3;
+	spi_setup(spi);
+
+	ad7173_sigma_delta_info.num_slots = st->info->num_configs;
+	ret = ad_sd_init(&st->sd, indio_dev, spi, &ad7173_sigma_delta_info);
+	if (ret)
+		return ret;
+
+	ret = ad7173_fw_parse_device_config(indio_dev);
+	if (ret)
+		return ret;
+
+	ret = devm_ad_sd_setup_buffer_and_trigger(dev, indio_dev);
+	if (ret)
+		return ret;
+
+	ret = ad7173_setup(indio_dev);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		return ret;
+
+	if (IS_ENABLED(CONFIG_GPIOLIB))
+		return ad7173_gpio_init(st);
+
+	return 0;
+}
+
+static const struct of_device_id ad7173_of_match[] = {
+	{ .compatible = "adi,ad7172-2",
+	  .data = &ad7173_device_info[ID_AD7172_2]},
+	{ .compatible = "adi,ad7173-8",
+	  .data = &ad7173_device_info[ID_AD7173_8]},
+	{ .compatible = "adi,ad7175-2",
+	  .data = &ad7173_device_info[ID_AD7175_2]},
+	{ .compatible = "adi,ad7176-2",
+	  .data = &ad7173_device_info[ID_AD7176_2]},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ad7173_of_match);
+
+static const struct spi_device_id ad7173_id_table[] = {
+	{ "ad7172-2", (kernel_ulong_t)&ad7173_device_info[ID_AD7172_2]},
+	{ "ad7173-8", (kernel_ulong_t)&ad7173_device_info[ID_AD7173_8]},
+	{ "ad7175-2", (kernel_ulong_t)&ad7173_device_info[ID_AD7175_2]},
+	{ "ad7176-2", (kernel_ulong_t)&ad7173_device_info[ID_AD7176_2]},
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, ad7173_id_table);
+
+static struct spi_driver ad7173_driver = {
+	.driver = {
+		.name	= "ad7173",
+		.of_match_table = ad7173_of_match,
+	},
+	.probe		= ad7173_probe,
+	.id_table	= ad7173_id_table,
+};
+module_spi_driver(ad7173_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafo.de>");
+MODULE_AUTHOR("Dumitru Ceclan <dumitru.ceclan@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7172/AD7173/AD7175/AD7176 ADC driver");
+MODULE_LICENSE("GPL");