diff mbox series

[v3,09/73] gpio: mvebu: use new pinctrl GPIO helpers

Message ID 20231017120431.68847-10-brgl@bgdev.pl
State New
Headers show
Series pinctrl: don't use GPIOLIB global numberspace in helpers | expand

Commit Message

Bartosz Golaszewski Oct. 17, 2023, 12:03 p.m. UTC
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/gpio/gpio-mvebu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index e5f2c2d2a721..c0ca0aa7b5cd 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -346,7 +346,7 @@  static int mvebu_gpio_direction_input(struct gpio_chip *chip, unsigned int pin)
 	 * Check with the pinctrl driver whether this pin is usable as
 	 * an input GPIO
 	 */
-	ret = pinctrl_gpio_direction_input(chip->base + pin);
+	ret = pinctrl_gpio_direction_input_new(chip, pin);
 	if (ret)
 		return ret;
 
@@ -366,7 +366,7 @@  static int mvebu_gpio_direction_output(struct gpio_chip *chip, unsigned int pin,
 	 * Check with the pinctrl driver whether this pin is usable as
 	 * an output GPIO
 	 */
-	ret = pinctrl_gpio_direction_output(chip->base + pin);
+	ret = pinctrl_gpio_direction_output_new(chip, pin);
 	if (ret)
 		return ret;