diff mbox series

[v3,2/3] pinctrl: qcom: sm8350-lpass-lpi: add SM8350 LPASS TLMM

Message ID 20230719192058.433517-2-krzysztof.kozlowski@linaro.org
State New
Headers show
Series [v3,1/3] dt-bindings: pinctrl: qcom,sm8350-lpass-lpi: add SM8350 LPASS TLMM | expand

Commit Message

Krzysztof Kozlowski July 19, 2023, 7:20 p.m. UTC 
Add driver for pin controller in Low Power Audio SubSystem (LPASS).  The
driver is similar to SM8250 LPASS pin controller, with difference in one
new pin (gpio14) belonging to swr_tx_data.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes in v3:
1. Drop incorrect LPI_MUX_swr_tx_data2 function.
2. Correct gpio14 group to swr_tx_data in sm8350_groups.
3. Add MODULE_AUTHOR.

Changes in v2:
1. Typo in commit msg SM8450->SM8250
2. Typo in Kconfig entry (SM3550->SM8350)
---
 drivers/pinctrl/qcom/Kconfig                  |  10 ++
 drivers/pinctrl/qcom/Makefile                 |   1 +
 .../pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c   | 167 ++++++++++++++++++
 3 files changed, 178 insertions(+)
 create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c

Comments

Linus Walleij July 24, 2023, 6:09 p.m. UTC | #1 
On Wed, Jul 19, 2023 at 9:21 PM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:

> Add driver for pin controller in Low Power Audio SubSystem (LPASS).  The
> driver is similar to SM8250 LPASS pin controller, with difference in one
> new pin (gpio14) belonging to swr_tx_data.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

This sure looks good to me.

Krzystof, can you collect a branch with pin control changes for
Qualcomm chips that I can pull? If it's OK with Bjorn that is.

Yours,
Linus Walleij
Krzysztof Kozlowski July 24, 2023, 7:06 p.m. UTC | #2 
On 24/07/2023 20:09, Linus Walleij wrote:
> On Wed, Jul 19, 2023 at 9:21 PM Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org> wrote:
> 
>> Add driver for pin controller in Low Power Audio SubSystem (LPASS).  The
>> driver is similar to SM8250 LPASS pin controller, with difference in one
>> new pin (gpio14) belonging to swr_tx_data.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> This sure looks good to me.
> 
> Krzystof, can you collect a branch with pin control changes for
> Qualcomm chips that I can pull? If it's OK with Bjorn that is.

Sure, I can go through the lore search results and grab recent submissions.

Best regards,
Krzysztof
Linus Walleij July 25, 2023, 6:18 p.m. UTC | #3 
On Mon, Jul 24, 2023 at 9:06 PM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
> On 24/07/2023 20:09, Linus Walleij wrote:
> > On Wed, Jul 19, 2023 at 9:21 PM Krzysztof Kozlowski
> > <krzysztof.kozlowski@linaro.org> wrote:
> >
> >> Add driver for pin controller in Low Power Audio SubSystem (LPASS).  The
> >> driver is similar to SM8250 LPASS pin controller, with difference in one
> >> new pin (gpio14) belonging to swr_tx_data.
> >>
> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> >
> > This sure looks good to me.
> >
> > Krzystof, can you collect a branch with pin control changes for
> > Qualcomm chips that I can pull? If it's OK with Bjorn that is.
>
> Sure, I can go through the lore search results and grab recent submissions.

Thanks, I think you know better than me what is the stuff that is reviewed
and ready for merge.

I have this on my devel branch so far:
59d612a3215c dt-bindings: pinctrl: qcom: lpass-lpi: Remove qcom,adsp-bypass-mode
abf02e132cb6 pinctrl: qcom: lpass-lpi: Make the clocks optional, always
1e46c7430af7 pinctrl: qcom-pmic-gpio: Add support for pmx75
8fff6514ff0a pinctrl: qcom-pmic-gpio: Add support for pm7550ba
75ec058db332 dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx75 support
4bbee99da13a dt-bindings: pinctrl: qcom-pmic-gpio: Add pm7550ba support

Anything else is in some inbetween state and I'm not sure of the status
so it would really offload me if you could get it in order!

Yours,
Linus Walleij
Krzysztof Kozlowski July 26, 2023, 9:14 a.m. UTC | #4 
On Wed, 19 Jul 2023 21:20:57 +0200, Krzysztof Kozlowski wrote:
> Add driver for pin controller in Low Power Audio SubSystem (LPASS).  The
> driver is similar to SM8250 LPASS pin controller, with difference in one
> new pin (gpio14) belonging to swr_tx_data.
> 
> 

Applied, thanks!

[2/3] pinctrl: qcom: sm8350-lpass-lpi: add SM8350 LPASS TLMM
      https://git.kernel.org/krzk/linux-dt/c/be9f6d56381d995f600524ad99fa8a9cc5bd5c49

Best regards,
Krzysztof Kozlowski July 26, 2023, 9:37 a.m. UTC | #5 
On 25/07/2023 20:18, Linus Walleij wrote:
> On Mon, Jul 24, 2023 at 9:06 PM Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org> wrote:
>> On 24/07/2023 20:09, Linus Walleij wrote:
>>> On Wed, Jul 19, 2023 at 9:21 PM Krzysztof Kozlowski
>>> <krzysztof.kozlowski@linaro.org> wrote:
>>>
>>>> Add driver for pin controller in Low Power Audio SubSystem (LPASS).  The
>>>> driver is similar to SM8250 LPASS pin controller, with difference in one
>>>> new pin (gpio14) belonging to swr_tx_data.
>>>>
>>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>>
>>> This sure looks good to me.
>>>
>>> Krzystof, can you collect a branch with pin control changes for
>>> Qualcomm chips that I can pull? If it's OK with Bjorn that is.
>>
>> Sure, I can go through the lore search results and grab recent submissions.
> 
> Thanks, I think you know better than me what is the stuff that is reviewed
> and ready for merge.
> 
> I have this on my devel branch so far:
> 59d612a3215c dt-bindings: pinctrl: qcom: lpass-lpi: Remove qcom,adsp-bypass-mode
> abf02e132cb6 pinctrl: qcom: lpass-lpi: Make the clocks optional, always
> 1e46c7430af7 pinctrl: qcom-pmic-gpio: Add support for pmx75
> 8fff6514ff0a pinctrl: qcom-pmic-gpio: Add support for pm7550ba
> 75ec058db332 dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx75 support
> 4bbee99da13a dt-bindings: pinctrl: qcom-pmic-gpio: Add pm7550ba support
> 
> Anything else is in some inbetween state and I'm not sure of the status
> so it would really offload me if you could get it in order!

It seems only my patchset, SM6115 LPASS pinctrl and one my binding
change were missing, so I took these.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 634c75336983..643f1d7a531e 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -77,6 +77,16 @@  config PINCTRL_SM8250_LPASS_LPI
 	  Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
 	  (Low Power Island) found on the Qualcomm Technologies Inc SM8250 platform.
 
+config PINCTRL_SM8350_LPASS_LPI
+	tristate "Qualcomm Technologies Inc SM8350 LPASS LPI pin controller driver"
+	depends on ARM64 || COMPILE_TEST
+	depends on PINCTRL_LPASS_LPI
+	help
+	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+	  Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
+	  (Low Power Island) found on the Qualcomm Technologies Inc SM8350
+	  platform.
+
 config PINCTRL_SM8450_LPASS_LPI
 	tristate "Qualcomm Technologies Inc SM8450 LPASS LPI pin controller driver"
 	depends on ARM64 || COMPILE_TEST
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index 426ddbf35f32..76ffcfbffc8e 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -52,6 +52,7 @@  obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o
 obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
 obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
 obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
+obj-$(CONFIG_PINCTRL_SM8350_LPASS_LPI) += pinctrl-sm8350-lpass-lpi.o
 obj-$(CONFIG_PINCTRL_SM8450) += pinctrl-sm8450.o
 obj-$(CONFIG_PINCTRL_SM8450_LPASS_LPI) += pinctrl-sm8450-lpass-lpi.o
 obj-$(CONFIG_PINCTRL_SM8550) += pinctrl-sm8550.o
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c
new file mode 100644
index 000000000000..f889c779bccd
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c
@@ -0,0 +1,167 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020-2023 Linaro Ltd.
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "pinctrl-lpass-lpi.h"
+
+enum lpass_lpi_functions {
+	LPI_MUX_dmic1_clk,
+	LPI_MUX_dmic1_data,
+	LPI_MUX_dmic2_clk,
+	LPI_MUX_dmic2_data,
+	LPI_MUX_dmic3_clk,
+	LPI_MUX_dmic3_data,
+	LPI_MUX_i2s1_clk,
+	LPI_MUX_i2s1_data,
+	LPI_MUX_i2s1_ws,
+	LPI_MUX_i2s2_clk,
+	LPI_MUX_i2s2_data,
+	LPI_MUX_i2s2_ws,
+	LPI_MUX_qua_mi2s_data,
+	LPI_MUX_qua_mi2s_sclk,
+	LPI_MUX_qua_mi2s_ws,
+	LPI_MUX_swr_rx_clk,
+	LPI_MUX_swr_rx_data,
+	LPI_MUX_swr_tx_clk,
+	LPI_MUX_swr_tx_data,
+	LPI_MUX_wsa_swr_clk,
+	LPI_MUX_wsa_swr_data,
+	LPI_MUX_gpio,
+	LPI_MUX__,
+};
+
+static int gpio0_pins[] = { 0 };
+static int gpio1_pins[] = { 1 };
+static int gpio2_pins[] = { 2 };
+static int gpio3_pins[] = { 3 };
+static int gpio4_pins[] = { 4 };
+static int gpio5_pins[] = { 5 };
+static int gpio6_pins[] = { 6 };
+static int gpio7_pins[] = { 7 };
+static int gpio8_pins[] = { 8 };
+static int gpio9_pins[] = { 9 };
+static int gpio10_pins[] = { 10 };
+static int gpio11_pins[] = { 11 };
+static int gpio12_pins[] = { 12 };
+static int gpio13_pins[] = { 13 };
+static int gpio14_pins[] = { 14 };
+
+static const struct pinctrl_pin_desc sm8350_lpi_pins[] = {
+	PINCTRL_PIN(0, "gpio0"),
+	PINCTRL_PIN(1, "gpio1"),
+	PINCTRL_PIN(2, "gpio2"),
+	PINCTRL_PIN(3, "gpio3"),
+	PINCTRL_PIN(4, "gpio4"),
+	PINCTRL_PIN(5, "gpio5"),
+	PINCTRL_PIN(6, "gpio6"),
+	PINCTRL_PIN(7, "gpio7"),
+	PINCTRL_PIN(8, "gpio8"),
+	PINCTRL_PIN(9, "gpio9"),
+	PINCTRL_PIN(10, "gpio10"),
+	PINCTRL_PIN(11, "gpio11"),
+	PINCTRL_PIN(12, "gpio12"),
+	PINCTRL_PIN(13, "gpio13"),
+	PINCTRL_PIN(14, "gpio14"),
+};
+
+static const char * const swr_tx_clk_groups[] = { "gpio0" };
+static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5", "gpio14" };
+static const char * const swr_rx_clk_groups[] = { "gpio3" };
+static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
+static const char * const dmic1_clk_groups[] = { "gpio6" };
+static const char * const dmic1_data_groups[] = { "gpio7" };
+static const char * const dmic2_clk_groups[] = { "gpio8" };
+static const char * const dmic2_data_groups[] = { "gpio9" };
+static const char * const i2s2_clk_groups[] = { "gpio10" };
+static const char * const i2s2_ws_groups[] = { "gpio11" };
+static const char * const dmic3_clk_groups[] = { "gpio12" };
+static const char * const dmic3_data_groups[] = { "gpio13" };
+static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
+static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
+static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
+static const char * const i2s1_clk_groups[] = { "gpio6" };
+static const char * const i2s1_ws_groups[] = { "gpio7" };
+static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
+static const char * const wsa_swr_clk_groups[] = { "gpio10" };
+static const char * const wsa_swr_data_groups[] = { "gpio11" };
+static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" };
+
+static const struct lpi_pingroup sm8350_groups[] = {
+	LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
+	LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
+	LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
+	LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
+	LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
+	LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
+	LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _,  _),
+	LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _),
+	LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _),
+	LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _),
+	LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
+	LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
+	LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _),
+	LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _),
+	LPI_PINGROUP(14, 6, swr_tx_data, _, _, _),
+};
+
+static const struct lpi_function sm8350_functions[] = {
+	LPI_FUNCTION(dmic1_clk),
+	LPI_FUNCTION(dmic1_data),
+	LPI_FUNCTION(dmic2_clk),
+	LPI_FUNCTION(dmic2_data),
+	LPI_FUNCTION(dmic3_clk),
+	LPI_FUNCTION(dmic3_data),
+	LPI_FUNCTION(i2s1_clk),
+	LPI_FUNCTION(i2s1_data),
+	LPI_FUNCTION(i2s1_ws),
+	LPI_FUNCTION(i2s2_clk),
+	LPI_FUNCTION(i2s2_data),
+	LPI_FUNCTION(i2s2_ws),
+	LPI_FUNCTION(qua_mi2s_data),
+	LPI_FUNCTION(qua_mi2s_sclk),
+	LPI_FUNCTION(qua_mi2s_ws),
+	LPI_FUNCTION(swr_rx_clk),
+	LPI_FUNCTION(swr_rx_data),
+	LPI_FUNCTION(swr_tx_clk),
+	LPI_FUNCTION(swr_tx_data),
+	LPI_FUNCTION(wsa_swr_clk),
+	LPI_FUNCTION(wsa_swr_data),
+};
+
+static const struct lpi_pinctrl_variant_data sm8350_lpi_data = {
+	.pins = sm8350_lpi_pins,
+	.npins = ARRAY_SIZE(sm8350_lpi_pins),
+	.groups = sm8350_groups,
+	.ngroups = ARRAY_SIZE(sm8350_groups),
+	.functions = sm8350_functions,
+	.nfunctions = ARRAY_SIZE(sm8350_functions),
+};
+
+static const struct of_device_id lpi_pinctrl_of_match[] = {
+	{
+	       .compatible = "qcom,sm8350-lpass-lpi-pinctrl",
+	       .data = &sm8350_lpi_data,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
+
+static struct platform_driver lpi_pinctrl_driver = {
+	.driver = {
+		   .name = "qcom-sm8350-lpass-lpi-pinctrl",
+		   .of_match_table = lpi_pinctrl_of_match,
+	},
+	.probe = lpi_pinctrl_probe,
+	.remove = lpi_pinctrl_remove,
+};
+module_platform_driver(lpi_pinctrl_driver);
+
+MODULE_AUTHOR("Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>");
+MODULE_DESCRIPTION("QTI SM8350 LPI GPIO pin control driver");
+MODULE_LICENSE("GPL");