| Message ID | 20230515092515.180920-1-brgl@bgdev.pl |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] pinctrl: qcom: sa8775p: add the wakeirq map | expand |
On 15.05.2023 11:25, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > The SA8775P TLMM driver is missing the GPIO-to-wakeup-pin mapping. This > adds it. > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > v1 -> v2: > - fix the 30->200 mapping > > drivers/pinctrl/qcom/pinctrl-sa8775p.c | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/drivers/pinctrl/qcom/pinctrl-sa8775p.c b/drivers/pinctrl/qcom/pinctrl-sa8775p.c > index 2ae7cdca65d3..6ea0197b36c6 100644 > --- a/drivers/pinctrl/qcom/pinctrl-sa8775p.c > +++ b/drivers/pinctrl/qcom/pinctrl-sa8775p.c > @@ -1491,6 +1491,23 @@ static const struct msm_pingroup sa8775p_groups[] = { > [153] = SDC_QDSD_PINGROUP(sdc1_data, 0x199000, 9, 0), > }; > > +static const struct msm_gpio_wakeirq_map sa8775p_pdc_map[] = { > + { 0, 169 }, { 1, 174 }, { 2, 170 }, { 3, 175 }, { 4, 171 }, { 5, 173 }, > + { 6, 172 }, { 7, 182 }, { 10, 220 }, { 11, 213 }, { 12, 221 }, > + { 16, 230 }, { 19, 231 }, { 20, 232 }, { 23, 233 }, { 24, 234 }, > + { 26, 223 }, { 27, 235 }, { 28, 209 }, { 29, 176 }, { 30, 200 }, > + { 31, 201 }, { 32, 212 }, { 35, 177 }, { 36, 178 }, { 39, 184 }, > + { 40, 185 }, { 41, 227 }, { 42, 186 }, { 43, 228 }, { 45, 187 }, > + { 47, 188 }, { 48, 194 }, { 51, 195 }, { 52, 196 }, { 55, 197 }, > + { 56, 198 }, { 57, 236 }, { 58, 192 }, { 59, 193 }, { 72, 179 }, > + { 73, 180 }, { 74, 181 }, { 75, 202 }, { 76, 183 }, { 77, 189 }, > + { 78, 190 }, { 79, 191 }, { 80, 199 }, { 83, 204 }, { 84, 205 }, > + { 85, 229 }, { 86, 206 }, { 89, 207 }, { 91, 208 }, { 94, 214 }, > + { 95, 215 }, { 96, 237 }, { 97, 216 }, { 98, 238 }, { 99, 217 }, > + { 100, 239 }, { 105, 219 }, { 106, 210 }, { 107, 211 }, { 108, 222 }, > + { 109, 203 }, { 145, 225 }, { 146, 226 }, > +}; > + > static const struct msm_pinctrl_soc_data sa8775p_pinctrl = { > .pins = sa8775p_pins, > .npins = ARRAY_SIZE(sa8775p_pins), > @@ -1499,6 +1516,8 @@ static const struct msm_pinctrl_soc_data sa8775p_pinctrl = { > .groups = sa8775p_groups, > .ngroups = ARRAY_SIZE(sa8775p_groups), > .ngpios = 150, > + .wakeirq_map = sa8775p_pdc_map, > + .nwakeirq_map = ARRAY_SIZE(sa8775p_pdc_map), > }; > > static int sa8775p_pinctrl_probe(struct platform_device *pdev)
On Mon, May 15, 2023 at 11:25 AM Bartosz Golaszewski <brgl@bgdev.pl> wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > The SA8775P TLMM driver is missing the GPIO-to-wakeup-pin mapping. This > adds it. > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > --- > v1 -> v2: > - fix the 30->200 mapping Patch applied! Yours, Linus Walleij
diff --git a/drivers/pinctrl/qcom/pinctrl-sa8775p.c b/drivers/pinctrl/qcom/pinctrl-sa8775p.c index 2ae7cdca65d3..6ea0197b36c6 100644 --- a/drivers/pinctrl/qcom/pinctrl-sa8775p.c +++ b/drivers/pinctrl/qcom/pinctrl-sa8775p.c @@ -1491,6 +1491,23 @@ static const struct msm_pingroup sa8775p_groups[] = { [153] = SDC_QDSD_PINGROUP(sdc1_data, 0x199000, 9, 0), }; +static const struct msm_gpio_wakeirq_map sa8775p_pdc_map[] = { + { 0, 169 }, { 1, 174 }, { 2, 170 }, { 3, 175 }, { 4, 171 }, { 5, 173 }, + { 6, 172 }, { 7, 182 }, { 10, 220 }, { 11, 213 }, { 12, 221 }, + { 16, 230 }, { 19, 231 }, { 20, 232 }, { 23, 233 }, { 24, 234 }, + { 26, 223 }, { 27, 235 }, { 28, 209 }, { 29, 176 }, { 30, 200 }, + { 31, 201 }, { 32, 212 }, { 35, 177 }, { 36, 178 }, { 39, 184 }, + { 40, 185 }, { 41, 227 }, { 42, 186 }, { 43, 228 }, { 45, 187 }, + { 47, 188 }, { 48, 194 }, { 51, 195 }, { 52, 196 }, { 55, 197 }, + { 56, 198 }, { 57, 236 }, { 58, 192 }, { 59, 193 }, { 72, 179 }, + { 73, 180 }, { 74, 181 }, { 75, 202 }, { 76, 183 }, { 77, 189 }, + { 78, 190 }, { 79, 191 }, { 80, 199 }, { 83, 204 }, { 84, 205 }, + { 85, 229 }, { 86, 206 }, { 89, 207 }, { 91, 208 }, { 94, 214 }, + { 95, 215 }, { 96, 237 }, { 97, 216 }, { 98, 238 }, { 99, 217 }, + { 100, 239 }, { 105, 219 }, { 106, 210 }, { 107, 211 }, { 108, 222 }, + { 109, 203 }, { 145, 225 }, { 146, 226 }, +}; + static const struct msm_pinctrl_soc_data sa8775p_pinctrl = { .pins = sa8775p_pins, .npins = ARRAY_SIZE(sa8775p_pins), @@ -1499,6 +1516,8 @@ static const struct msm_pinctrl_soc_data sa8775p_pinctrl = { .groups = sa8775p_groups, .ngroups = ARRAY_SIZE(sa8775p_groups), .ngpios = 150, + .wakeirq_map = sa8775p_pdc_map, + .nwakeirq_map = ARRAY_SIZE(sa8775p_pdc_map), }; static int sa8775p_pinctrl_probe(struct platform_device *pdev)