diff mbox series

[v2,03/10] dt-bindings: pinctrl: qcom,sm6375: correct GPIO name pattern and example

Message ID 20230202104452.299048-4-krzysztof.kozlowski@linaro.org
State New
Headers show
Series pinctrl/ARM/arm64: qcom: correct TLMM gpio-ranges and GPIO pin names | expand

Commit Message

Krzysztof Kozlowski Feb. 2, 2023, 10:44 a.m. UTC 
The SM6375 TLMM pin controller has GPIOs 0-155, so narrow the pattern
and gpio-ranges in the example.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml         | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Rob Herring (Arm) Feb. 3, 2023, 12:04 a.m. UTC | #1 
On Thu, 02 Feb 2023 11:44:45 +0100, Krzysztof Kozlowski wrote:
> The SM6375 TLMM pin controller has GPIOs 0-155, so narrow the pattern
> and gpio-ranges in the example.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml         | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
Krzysztof Kozlowski Feb. 3, 2023, 7:17 a.m. UTC | #2 
On Thu, 2 Feb 2023 11:44:45 +0100, Krzysztof Kozlowski wrote:
> The SM6375 TLMM pin controller has GPIOs 0-155, so narrow the pattern
> and gpio-ranges in the example.
> 
> 

Applied, thanks!

[03/10] dt-bindings: pinctrl: qcom,sm6375: correct GPIO name pattern and example
        https://git.kernel.org/krzk/linux-dt/c/a51c1f0244c84e482f1ceb4701c38aaa4b224baf

Best regards,
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
index e4231d10d76f..66cef48ed59b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
@@ -63,7 +63,7 @@  $defs:
           subnode.
         items:
           oneOf:
-            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-6])$"
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-5])$"
             - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
                       sdc2_cmd, sdc2_data ]
         minItems: 1
@@ -134,7 +134,7 @@  examples:
         #gpio-cells = <2>;
         interrupt-controller;
         #interrupt-cells = <2>;
-        gpio-ranges = <&tlmm 0 0 157>;
+        gpio-ranges = <&tlmm 0 0 157>; /* GPIOs + ufs_reset */
 
         gpio-wo-subnode-state {
             pins = "gpio1";