diff mbox series

[v2,4/4] arm64: tegra: Separate AON pinmux from main pinmux on Tegra194

Message ID 20220704165802.129717-5-thierry.reding@gmail.com
State New
Headers show
Series pinctrl: tegra: Separate Tegra194 instances | expand

Commit Message

Thierry Reding July 4, 2022, 4:58 p.m. UTC
From: Thierry Reding <treding@nvidia.com>

The registers for the AON pinmux reside in a partition different from
the registers for the main pinmux. Instead of treating them as one and
the same device, split them up so that they are each their own devices.
Also add gpio-ranges properties to the corresponding GPIO controllers
such that the pinmux and GPIO controllers can be paired up properly.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 78277b538002..2638e480e7da 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -86,6 +86,7 @@  gpio: gpio@2200000 {
 			interrupt-controller;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pinmux 0 0 169>;
 		};
 
 		cbb-noc@2300000 {
@@ -626,9 +627,7 @@  tegra_asrc: asrc@2910000 {
 
 		pinmux: pinmux@2430000 {
 			compatible = "nvidia,tegra194-pinmux";
-			reg = <0x2430000 0x17000>,
-			      <0xc300000 0x4000>;
-
+			reg = <0x2430000 0x17000>;
 			status = "okay";
 
 			pex_rst_c5_out_state: pex_rst_c5_out {
@@ -1638,6 +1637,14 @@  gpio_aon: gpio@c2f0000 {
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-range = <&pinmux_aon 0 0 30>;
+		};
+
+		pinmux_aon: pinmux@c300000 {
+			compatible = "nvidia,tegra194-pinmux-aon";
+			reg = <0xc300000 0x4000>;
+
+			status = "okay";
 		};
 
 		pwm4: pwm@c340000 {