@@ -297,6 +297,16 @@ config MFD_ASIC3
This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)
+config MFD_TN48M_CPLD
+ tristate "Delta Networks TN48M switch CPLD driver"
+ depends on I2C
+ select MFD_SIMPLE_MFD_I2C
+ help
+ Select this option to enable support for Delta Networks TN48M switch
+ CPLD. It consists of reset and GPIO drivers. CPLD provides GPIOS-s
+ for the SFP slots as well as power supply related information.
+ SFP support depends on the GPIO driver being selected.
+
config PMIC_DA903X
bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
depends on I2C=y
@@ -39,6 +39,7 @@ static int simple_mfd_i2c_probe(struct i2c_client *i2c)
static const struct of_device_id simple_mfd_i2c_of_match[] = {
{ .compatible = "kontron,sl28cpld" },
+ { .compatible = "delta,tn48m-cpld" },
{}
};
MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match);
Delta TN48M switches have a Lattice CPLD that serves multiple purposes including being a GPIO expander. So, lets use the simple I2C MFD driver to provide the MFD core. Also add a virtual symbol which pulls in the simple-mfd-i2c driver and provide a common symbol on which the subdevice drivers can depend on. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> --- Changes in v2: * Drop the custom MFD driver and header * Use simple I2C MFD driver --- drivers/mfd/Kconfig | 10 ++++++++++ drivers/mfd/simple-mfd-i2c.c | 1 + 2 files changed, 11 insertions(+)