| Message ID | 20210930121630.17449-3-prabhakar.mahadev-lad.rj@bp.renesas.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add "output-impedance" property to pinconf-generic | expand |
Hi Prabhakar, On Thu, Sep 30, 2021 at 2:17 PM Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote: > Add "output-impedance" property to generic options used for DT parsing > files. This enables drivers, which use generic pin configurations, to > get the value passed to this property. > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Thanks for your patch! > --- a/drivers/pinctrl/pinconf-generic.c > +++ b/drivers/pinctrl/pinconf-generic.c > @@ -46,6 +46,7 @@ static const struct pin_config_item conf_items[] = { > PCONFDUMP(PIN_CONFIG_MODE_LOW_POWER, "pin low power", "mode", true), > PCONFDUMP(PIN_CONFIG_OUTPUT_ENABLE, "output enabled", NULL, false), > PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true), > + PCONFDUMP(PIN_CONFIG_OUTPUT_IMPEDANCE, "output impedance", "ohm", true), > PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true), > PCONFDUMP(PIN_CONFIG_SLEEP_HARDWARE_STATE, "sleep hardware state", NULL, false), > PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true), > @@ -179,6 +180,7 @@ static const struct pinconf_generic_params dt_params[] = { > { "output-disable", PIN_CONFIG_OUTPUT_ENABLE, 0 }, > { "output-enable", PIN_CONFIG_OUTPUT_ENABLE, 1 }, > { "output-high", PIN_CONFIG_OUTPUT, 1, }, > + { "output-impedance", PIN_CONFIG_OUTPUT_IMPEDANCE, 0 }, "output-impedance-ohms", as per DT standardized property units. > { "output-low", PIN_CONFIG_OUTPUT, 0, }, > { "power-source", PIN_CONFIG_POWER_SOURCE, 0 }, > { "sleep-hardware-state", PIN_CONFIG_SLEEP_HARDWARE_STATE, 0 }, With the above fixed: Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert
Hi Geert, Thank you for the review. On Thu, Oct 7, 2021 at 6:02 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > > Hi Prabhakar, > > On Thu, Sep 30, 2021 at 2:17 PM Lad Prabhakar > <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote: > > Add "output-impedance" property to generic options used for DT parsing > > files. This enables drivers, which use generic pin configurations, to > > get the value passed to this property. > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Thanks for your patch! > > > --- a/drivers/pinctrl/pinconf-generic.c > > +++ b/drivers/pinctrl/pinconf-generic.c > > @@ -46,6 +46,7 @@ static const struct pin_config_item conf_items[] = { > > PCONFDUMP(PIN_CONFIG_MODE_LOW_POWER, "pin low power", "mode", true), > > PCONFDUMP(PIN_CONFIG_OUTPUT_ENABLE, "output enabled", NULL, false), > > PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true), > > + PCONFDUMP(PIN_CONFIG_OUTPUT_IMPEDANCE, "output impedance", "ohm", true), > > PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true), > > PCONFDUMP(PIN_CONFIG_SLEEP_HARDWARE_STATE, "sleep hardware state", NULL, false), > > PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true), > > @@ -179,6 +180,7 @@ static const struct pinconf_generic_params dt_params[] = { > > { "output-disable", PIN_CONFIG_OUTPUT_ENABLE, 0 }, > > { "output-enable", PIN_CONFIG_OUTPUT_ENABLE, 1 }, > > { "output-high", PIN_CONFIG_OUTPUT, 1, }, > > + { "output-impedance", PIN_CONFIG_OUTPUT_IMPEDANCE, 0 }, > > "output-impedance-ohms", as per DT standardized property units. > Sure will replace that with output-impedance-ohms and to chime in Ill re-name the macro to PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS Cheers, Prabhakar > > { "output-low", PIN_CONFIG_OUTPUT, 0, }, > > { "power-source", PIN_CONFIG_POWER_SOURCE, 0 }, > > { "sleep-hardware-state", PIN_CONFIG_SLEEP_HARDWARE_STATE, 0 }, > > With the above fixed: > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like that. > -- Linus Torvalds
diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c index 22e8d4c4040e..3bff4e4340b9 100644 --- a/drivers/pinctrl/pinconf-generic.c +++ b/drivers/pinctrl/pinconf-generic.c @@ -46,6 +46,7 @@ static const struct pin_config_item conf_items[] = { PCONFDUMP(PIN_CONFIG_MODE_LOW_POWER, "pin low power", "mode", true), PCONFDUMP(PIN_CONFIG_OUTPUT_ENABLE, "output enabled", NULL, false), PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true), + PCONFDUMP(PIN_CONFIG_OUTPUT_IMPEDANCE, "output impedance", "ohm", true), PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true), PCONFDUMP(PIN_CONFIG_SLEEP_HARDWARE_STATE, "sleep hardware state", NULL, false), PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true), @@ -179,6 +180,7 @@ static const struct pinconf_generic_params dt_params[] = { { "output-disable", PIN_CONFIG_OUTPUT_ENABLE, 0 }, { "output-enable", PIN_CONFIG_OUTPUT_ENABLE, 1 }, { "output-high", PIN_CONFIG_OUTPUT, 1, }, + { "output-impedance", PIN_CONFIG_OUTPUT_IMPEDANCE, 0 }, { "output-low", PIN_CONFIG_OUTPUT, 0, }, { "power-source", PIN_CONFIG_POWER_SOURCE, 0 }, { "sleep-hardware-state", PIN_CONFIG_SLEEP_HARDWARE_STATE, 0 }, diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index eee0e3948537..e6293ebd4052 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -91,6 +91,8 @@ struct pinctrl_map; * configuration (eg. the currently selected mux function) drive values on * the line. Use argument 1 to enable output mode, argument 0 to disable * it. + * @PIN_CONFIG_OUTPUT_IMPEDANCE: this will configure the pins output impedance with + * the value passed as argument. The argument is in ohm. * @PIN_CONFIG_PERSIST_STATE: retain pin state across sleep or controller reset * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power * supplies, the argument to this parameter (on a custom format) tells @@ -129,6 +131,7 @@ enum pin_config_param { PIN_CONFIG_MODE_PWM, PIN_CONFIG_OUTPUT, PIN_CONFIG_OUTPUT_ENABLE, + PIN_CONFIG_OUTPUT_IMPEDANCE, PIN_CONFIG_PERSIST_STATE, PIN_CONFIG_POWER_SOURCE, PIN_CONFIG_SKEW_DELAY,
Add "output-impedance" property to generic options used for DT parsing files. This enables drivers, which use generic pin configurations, to get the value passed to this property. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> --- drivers/pinctrl/pinconf-generic.c | 2 ++ include/linux/pinctrl/pinconf-generic.h | 3 +++ 2 files changed, 5 insertions(+)