| Message ID | 20210612094534.88992-1-martin.botka@somainline.org |
|---|---|
| State | New |
| Headers | show |
| Series | [V4,1/2] dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver | expand |
On Sat, 12 Jun 2021 11:45:30 +0200, Martin Botka wrote: > Document the newly added SM6125 pinctrl driver > > Signed-off-by: Martin Botka <martin.botka@somainline.org> > --- > Changes in V2: > Add commit description > Changes in V3: > Fix syntax errors > Remove not needed state from example > Changes in V4: > maxItems set to 3 > Correct the pattern > Remove deleted enums > Fix the compatible > .../bindings/pinctrl/qcom,sm6125-pinctrl.yaml | 124 ++++++++++++++++++ > 1 file changed, 124 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.example.dt.yaml: pinctrl@500000: 'reg-names' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml \ndoc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1491257 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Sat 12 Jun 04:45 CDT 2021, Martin Botka wrote: > Document the newly added SM6125 pinctrl driver > > Signed-off-by: Martin Botka <martin.botka@somainline.org> > --- > Changes in V2: > Add commit description > Changes in V3: > Fix syntax errors > Remove not needed state from example > Changes in V4: > maxItems set to 3 > Correct the pattern > Remove deleted enums > Fix the compatible > .../bindings/pinctrl/qcom,sm6125-pinctrl.yaml | 124 ++++++++++++++++++ > 1 file changed, 124 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml > new file mode 100644 > index 000000000000..45366945a86f > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml > @@ -0,0 +1,124 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-pinctrl.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > +title: Qualcomm Technologies, Inc. SM6125 TLMM block > + > +maintainers: > + - Martin Botka <martin.botka@somainline.org> > + > +description: | > + This binding describes the Top Level Mode Multiplexer (TLMM) block found > + in the SM6125 platform. > + > +allOf: > + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# > + > +properties: > + compatible: > + const: qcom,sm6125-tlmm > + > + reg: > + maxItems: 3 > + As Rob's bot pointed out, you're missing reg-names here. > + interrupts: true > + interrupt-controller: true > + '#interrupt-cells': true > + gpio-controller: true > + gpio-reserved-ranges: true > + '#gpio-cells': true > + gpio-ranges: true > + wakeup-parent: true > + > +required: > + - compatible > + - reg And given the use of tiles, I would suggest that reg-names is required as well. Other than that, I think this looks great. Regards, Bjorn > + > +additionalProperties: false > + > +patternProperties: > + '-state$': > + oneOf: > + - $ref: "#/$defs/qcom-sm6125-tlmm-state" > + - patternProperties: > + ".*": > + $ref: "#/$defs/qcom-sm6125-tlmm-state" > + > +$defs: > + qcom-sm6125-tlmm-state: > + type: object > + description: > + Pinctrl node's client devices use subnodes for desired pin configuration. > + Client device subnodes use below standard properties. > + $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" > + > + properties: > + pins: > + description: > + List of gpio pins affected by the properties specified in this > + subnode. > + items: > + oneOf: > + - pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$" > + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ] > + minItems: 1 > + maxItems: 36 > + > + function: > + description: > + Specify the alternative function to be configured for the specified > + pins. > + > + enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, > + atest_char2, atest_char3, atest_tsens, atest_tsens2, atest_usb1, > + atest_usb10, atest_usb11, atest_usb12, atest_usb13, atest_usb2, > + atest_usb20, atest_usb21, atest_usb22, atest_usb23, aud_sb, > + audio_ref, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1, > + cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, cri_trng, > + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, > + ddr_pxi2, ddr_pxi3, debug_hot, dmic0_clk, dmic0_data, dmic1_clk, > + dmic1_data, dp_hot, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, > + gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en, > + ldo_update, m_voc, mclk1, mclk2, mdp_vsync, mdp_vsync0, mdp_vsync1, > + mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, mpm_pwr, mss_lte, > + nav_pps, pa_indicator, phase_flag, pll_bist, pll_bypassnl, pll_reset, > + pri_mi2s, pri_mi2s_ws, prng_rosc, qca_sb, qdss_cti, qdss, qlink_enable, > + qlink_request, qua_mi2s, qui_mi2s, qup00, qup01, qup02, qup03, qup04, > + qup10, qup11, qup12, qup13, qup14, sd_write, sec_mi2s, sp_cmu, swr_rx, > + swr_tx, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm, > + uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, > + uim2_present, uim2_reset, unused1, unused2, usb_phy, vfr_1, vsense_trigger, > + wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ] > + > + > + bias-disable: true > + bias-pull-down: true > + bias-pull-up: true > + drive-strength: true > + input-enable: true > + output-high: true > + output-low: true > + > + required: > + - pins > + - function > + > + additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + pinctrl@500000 { > + compatible = "qcom,sm6125-tlmm"; > + reg = <0x00500000 0x400000>, > + <0x00900000 0x400000>, > + <0x00d00000 0x400000>; > + reg-names = "west", "south", "east"; > + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + gpio-ranges = <&tlmm 0 0 134>; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > -- > 2.31.1 >
Corrected all in V5. Added minItems to reg as well since all the regs are required. On Mon, Jun 14 2021 at 10:55:37 AM -0500, Bjorn Andersson <bjorn.andersson@linaro.org> wrote: > On Sat 12 Jun 04:45 CDT 2021, Martin Botka wrote: > >> Document the newly added SM6125 pinctrl driver >> >> Signed-off-by: Martin Botka <martin.botka@somainline.org> >> --- >> Changes in V2: >> Add commit description >> Changes in V3: >> Fix syntax errors >> Remove not needed state from example >> Changes in V4: >> maxItems set to 3 >> Correct the pattern >> Remove deleted enums >> Fix the compatible >> .../bindings/pinctrl/qcom,sm6125-pinctrl.yaml | 124 >> ++++++++++++++++++ >> 1 file changed, 124 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml >> >> diff --git >> a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml >> b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml >> new file mode 100644 >> index 000000000000..45366945a86f >> --- /dev/null >> +++ >> b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml >> @@ -0,0 +1,124 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: >> http://devicetree.org/schemas/pinctrl/qcom,sm6125-pinctrl.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> +title: Qualcomm Technologies, Inc. SM6125 TLMM block >> + >> +maintainers: >> + - Martin Botka <martin.botka@somainline.org> >> + >> +description: | >> + This binding describes the Top Level Mode Multiplexer (TLMM) >> block found >> + in the SM6125 platform. >> + >> +allOf: >> + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# >> + >> +properties: >> + compatible: >> + const: qcom,sm6125-tlmm >> + >> + reg: >> + maxItems: 3 >> + > > As Rob's bot pointed out, you're missing reg-names here. > >> + interrupts: true >> + interrupt-controller: true >> + '#interrupt-cells': true >> + gpio-controller: true >> + gpio-reserved-ranges: true >> + '#gpio-cells': true >> + gpio-ranges: true >> + wakeup-parent: true >> + >> +required: >> + - compatible >> + - reg > > And given the use of tiles, I would suggest that reg-names is required > as well. > > Other than that, I think this looks great. > > Regards, > Bjorn > >> + >> +additionalProperties: false >> + >> +patternProperties: >> + '-state$': >> + oneOf: >> + - $ref: "#/$defs/qcom-sm6125-tlmm-state" >> + - patternProperties: >> + ".*": >> + $ref: "#/$defs/qcom-sm6125-tlmm-state" >> + >> +$defs: >> + qcom-sm6125-tlmm-state: >> + type: object >> + description: >> + Pinctrl node's client devices use subnodes for desired pin >> configuration. >> + Client device subnodes use below standard properties. >> + $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" >> + >> + properties: >> + pins: >> + description: >> + List of gpio pins affected by the properties specified >> in this >> + subnode. >> + items: >> + oneOf: >> + - pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$" >> + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, >> sdc2_cmd, sdc2_data ] >> + minItems: 1 >> + maxItems: 36 >> + >> + function: >> + description: >> + Specify the alternative function to be configured for >> the specified >> + pins. >> + >> + enum: [ adsp_ext, agera_pll, atest_char, atest_char0, >> atest_char1, >> + atest_char2, atest_char3, atest_tsens, >> atest_tsens2, atest_usb1, >> + atest_usb10, atest_usb11, atest_usb12, >> atest_usb13, atest_usb2, >> + atest_usb20, atest_usb21, atest_usb22, >> atest_usb23, aud_sb, >> + audio_ref, cam_mclk, cci_async, cci_i2c, >> cci_timer0, cci_timer1, >> + cci_timer2, cci_timer3, cci_timer4, copy_gp, >> copy_phase, cri_trng, >> + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, >> ddr_pxi1, >> + ddr_pxi2, ddr_pxi3, debug_hot, dmic0_clk, >> dmic0_data, dmic1_clk, >> + dmic1_data, dp_hot, edp_hot, edp_lcd, gcc_gp1, >> gcc_gp2, gcc_gp3, >> + gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, >> jitter_bist, ldo_en, >> + ldo_update, m_voc, mclk1, mclk2, mdp_vsync, >> mdp_vsync0, mdp_vsync1, >> + mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, >> mpm_pwr, mss_lte, >> + nav_pps, pa_indicator, phase_flag, pll_bist, >> pll_bypassnl, pll_reset, >> + pri_mi2s, pri_mi2s_ws, prng_rosc, qca_sb, >> qdss_cti, qdss, qlink_enable, >> + qlink_request, qua_mi2s, qui_mi2s, qup00, qup01, >> qup02, qup03, qup04, >> + qup10, qup11, qup12, qup13, qup14, sd_write, >> sec_mi2s, sp_cmu, swr_rx, >> + swr_tx, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, >> tgu_ch3, tsense_pwm, >> + uim1_clk, uim1_data, uim1_present, uim1_reset, >> uim2_clk, uim2_data, >> + uim2_present, uim2_reset, unused1, unused2, >> usb_phy, vfr_1, vsense_trigger, >> + wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, >> wsa_clk, wsa_data ] >> + >> + >> + bias-disable: true >> + bias-pull-down: true >> + bias-pull-up: true >> + drive-strength: true >> + input-enable: true >> + output-high: true >> + output-low: true >> + >> + required: >> + - pins >> + - function >> + >> + additionalProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/interrupt-controller/arm-gic.h> >> + pinctrl@500000 { >> + compatible = "qcom,sm6125-tlmm"; >> + reg = <0x00500000 0x400000>, >> + <0x00900000 0x400000>, >> + <0x00d00000 0x400000>; >> + reg-names = "west", "south", "east"; >> + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; >> + gpio-controller; >> + gpio-ranges = <&tlmm 0 0 134>; >> + #gpio-cells = <2>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> -- >> 2.31.1 >>
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml new file mode 100644 index 000000000000..45366945a86f --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# +title: Qualcomm Technologies, Inc. SM6125 TLMM block + +maintainers: + - Martin Botka <martin.botka@somainline.org> + +description: | + This binding describes the Top Level Mode Multiplexer (TLMM) block found + in the SM6125 platform. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm6125-tlmm + + reg: + maxItems: 3 + + interrupts: true + interrupt-controller: true + '#interrupt-cells': true + gpio-controller: true + gpio-reserved-ranges: true + '#gpio-cells': true + gpio-ranges: true + wakeup-parent: true + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + '-state$': + oneOf: + - $ref: "#/$defs/qcom-sm6125-tlmm-state" + - patternProperties: + ".*": + $ref: "#/$defs/qcom-sm6125-tlmm-state" + +$defs: + qcom-sm6125-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, + atest_char2, atest_char3, atest_tsens, atest_tsens2, atest_usb1, + atest_usb10, atest_usb11, atest_usb12, atest_usb13, atest_usb2, + atest_usb20, atest_usb21, atest_usb22, atest_usb23, aud_sb, + audio_ref, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1, + cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, cri_trng, + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, + ddr_pxi2, ddr_pxi3, debug_hot, dmic0_clk, dmic0_data, dmic1_clk, + dmic1_data, dp_hot, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, + gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en, + ldo_update, m_voc, mclk1, mclk2, mdp_vsync, mdp_vsync0, mdp_vsync1, + mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, mpm_pwr, mss_lte, + nav_pps, pa_indicator, phase_flag, pll_bist, pll_bypassnl, pll_reset, + pri_mi2s, pri_mi2s_ws, prng_rosc, qca_sb, qdss_cti, qdss, qlink_enable, + qlink_request, qua_mi2s, qui_mi2s, qup00, qup01, qup02, qup03, qup04, + qup10, qup11, qup12, qup13, qup14, sd_write, sec_mi2s, sp_cmu, swr_rx, + swr_tx, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm, + uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, + uim2_present, uim2_reset, unused1, unused2, usb_phy, vfr_1, vsense_trigger, + wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ] + + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@500000 { + compatible = "qcom,sm6125-tlmm"; + reg = <0x00500000 0x400000>, + <0x00900000 0x400000>, + <0x00d00000 0x400000>; + reg-names = "west", "south", "east"; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 134>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + };
Document the newly added SM6125 pinctrl driver Signed-off-by: Martin Botka <martin.botka@somainline.org> --- Changes in V2: Add commit description Changes in V3: Fix syntax errors Remove not needed state from example Changes in V4: maxItems set to 3 Correct the pattern Remove deleted enums Fix the compatible .../bindings/pinctrl/qcom,sm6125-pinctrl.yaml | 124 ++++++++++++++++++ 1 file changed, 124 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml