@@ -222,7 +222,7 @@ config PINCTRL_SC7280
config PINCTRL_SC8180X
tristate "Qualcomm Technologies Inc SC8180x pin controller driver"
- depends on GPIOLIB && OF
+ depends on GPIOLIB && (OF || ACPI)
select PINCTRL_MSM
help
This is the pinctrl, pinmux, pinconf and gpiolib driver for the
@@ -4,6 +4,7 @@
* Copyright (c) 2020-2021, Linaro Ltd.
*/
+#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -17,6 +18,12 @@ static const char * const sc8180x_tiles[] = {
"west"
};
+static const u32 sc8180x_tile_offsets[] = {
+ 0x00d00000,
+ 0x00500000,
+ 0x00100000
+};
+
enum {
SOUTH,
EAST,
@@ -1557,6 +1564,13 @@ static const struct msm_pingroup sc8180x_groups[] = {
[193] = SDC_QDSD_PINGROUP(sdc2_data, 0x4b2000, 9, 0),
};
+static const int sc8180x_acpi_reserved_gpios[] = {
+ 0, 1, 2, 3,
+ 47, 48, 49, 50,
+ 126, 127, 128, 129,
+ -1 /* terminator */
+};
+
static const struct msm_gpio_wakeirq_map sc8180x_pdc_map[] = {
{ 3, 31 }, { 5, 32 }, { 8, 33 }, { 9, 34 }, { 10, 100 }, { 12, 104 },
{ 24, 37 }, { 26, 38 }, { 27, 41 }, { 28, 42 }, { 30, 39 }, { 36, 43 },
@@ -1588,13 +1602,43 @@ static struct msm_pinctrl_soc_data sc8180x_pinctrl = {
.nwakeirq_map = ARRAY_SIZE(sc8180x_pdc_map),
};
+static const struct msm_pinctrl_soc_data sc8180x_acpi_pinctrl = {
+ .tiles = sc8180x_tiles,
+ .ntiles = ARRAY_SIZE(sc8180x_tiles),
+ .tile_offsets = sc8180x_tile_offsets,
+ .pins = sc8180x_pins,
+ .npins = ARRAY_SIZE(sc8180x_pins),
+ .groups = sc8180x_groups,
+ .ngroups = ARRAY_SIZE(sc8180x_groups),
+ .reserved_gpios = sc8180x_acpi_reserved_gpios,
+ .ngpios = 191,
+};
+
static int sc8180x_pinctrl_probe(struct platform_device *pdev)
{
- return msm_pinctrl_probe(pdev, &sc8180x_pinctrl);
+ const struct msm_pinctrl_soc_data *soc_data;
+
+ soc_data = device_get_match_data(&pdev->dev);
+ if (!soc_data)
+ return -EINVAL;
+
+ return msm_pinctrl_probe(pdev, soc_data);
}
+static const struct acpi_device_id sc8180x_pinctrl_acpi_match[] = {
+ {
+ .id = "QCOM040D",
+ .driver_data = (kernel_ulong_t) &sc8180x_acpi_pinctrl,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, sc8180x_pinctrl_acpi_match);
+
static const struct of_device_id sc8180x_pinctrl_of_match[] = {
- { .compatible = "qcom,sc8180x-tlmm", },
+ {
+ .compatible = "qcom,sc8180x-tlmm",
+ .data = &sc8180x_pinctrl,
+ },
{ },
};
MODULE_DEVICE_TABLE(of, sc8180x_pinctrl_of_match);
@@ -1603,6 +1647,7 @@ static struct platform_driver sc8180x_pinctrl_driver = {
.driver = {
.name = "sc8180x-pinctrl",
.of_match_table = sc8180x_pinctrl_of_match,
+ .acpi_match_table = sc8180x_pinctrl_acpi_match,
},
.probe = sc8180x_pinctrl_probe,
.remove = msm_pinctrl_remove,
It adds ACPI probe support with tile offsets passed over to msm core driver via sc8180x_tile_offsets, as TLMM is described a single memory region in ACPI DSDT. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- drivers/pinctrl/qcom/Kconfig | 2 +- drivers/pinctrl/qcom/pinctrl-sc8180x.c | 49 ++++++++++++++++++++++++-- 2 files changed, 48 insertions(+), 3 deletions(-)