Message ID | 20191122192334.61490-3-hdegoede@redhat.com |
---|---|
State | New |
Headers | show |
Series | gpiolib: acpi: Add honor_wakeup module-option + quirk | expand |
On Fri, Nov 22, 2019 at 08:23:34PM +0100, Hans de Goede wrote: > On some laptops enabling wakeup on the GPIO interrupts used for ACPI _AEI > event handling causes spurious wakeups. > > This commit adds a new honor_wakeup option, defaulting to true (our current > behavior), which can be used to disable wakeup on troublesome hardware > to avoid these spurious wakeups. > > This is a workaround for an architectural problem with s2idle under Linux > where we do not have any mechanism to immediately go back to sleep after > wakeup events, other then for embedded-controller events using the standard > ACPI EC interface, for details see: > https://lore.kernel.org/linux-acpi/61450f9b-cbc6-0c09-8b3a-aff6bf9a0b3c@redhat.com/ > > One series of laptops which is not able to suspend without this workaround > is the HP x2 10 Cherry Trail models, this commit adds a DMI based quirk > which makes sets honor_wakeup to false on these models. I'm not against this approach (yeah, it seems we will always have a stream of quirks for BIOS enabled platforms, especially cheapest ones), though last word is by Rafael. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> One nit below, though. > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > --- > drivers/gpio/gpiolib-acpi.c | 33 ++++++++++++++++++++++++++++++++- > 1 file changed, 32 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c > index 2b47d906d536..9ce9b449ac4b 100644 > --- a/drivers/gpio/gpiolib-acpi.c > +++ b/drivers/gpio/gpiolib-acpi.c > @@ -22,12 +22,18 @@ > #include "gpiolib-acpi.h" > > #define QUIRK_NO_EDGE_EVENTS_ON_BOOT 0x01l > +#define QUIRK_NO_WAKEUP 0x02l > > static int run_edge_events_on_boot = -1; > module_param(run_edge_events_on_boot, int, 0444); > MODULE_PARM_DESC(run_edge_events_on_boot, > "Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto"); > > +static int honor_wakeup = -1; > +module_param(honor_wakeup, int, 0444); > +MODULE_PARM_DESC(honor_wakeup, > + "Honor the ACPI wake-capable flag: 0=no, 1=yes, -1=auto"); > + > /** > * struct acpi_gpio_event - ACPI GPIO event handler data > * > @@ -283,7 +289,8 @@ static acpi_status acpi_gpiochip_alloc_event(struct acpi_resource *ares, > event->handle = evt_handle; > event->handler = handler; > event->irq = irq; > - event->irq_is_wake = agpio->wake_capable == ACPI_WAKE_CAPABLE; > + if (honor_wakeup) > + event->irq_is_wake = agpio->wake_capable == ACPI_WAKE_CAPABLE; Perhaps: event->irq_is_wake = honor_wakeup && agpio->wake_capable == ACPI_WAKE_CAPABLE; ? (I don't care about 80 limit here) > event->pin = pin; > event->desc = desc; > > @@ -1337,6 +1344,23 @@ static const struct dmi_system_id gpiolib_acpi_quirks[] = { > }, > .driver_data = (void *)QUIRK_NO_EDGE_EVENTS_ON_BOOT, > }, > + { > + /* > + * Various HP X2 10 Cherry Trail models use external > + * embedded-controller connected via I2C + a ACPI GPIO > + * event handler. The embedded controller generates various > + * spurious wakeup events when suspended. So disable wakeup > + * for its handler (it used the only ACPI GPIO event handler). > + * This breaks wakeup when opening the lid, the user needs > + * to press the power-button to wakeup the system. The > + * alternative is suspend simply not working, which is worse. > + */ > + .matches = { > + DMI_MATCH(DMI_SYS_VENDOR, "HP"), > + DMI_MATCH(DMI_PRODUCT_NAME, "HP x2 Detachable 10-p0XX"), > + }, > + .driver_data = (void *)QUIRK_NO_WAKEUP, > + }, > {} /* Terminating entry */ > }; > > @@ -1356,6 +1380,13 @@ static int acpi_gpio_setup_params(void) > run_edge_events_on_boot = 1; > } > > + if (honor_wakeup < 0) { > + if (quirks & QUIRK_NO_WAKEUP) > + honor_wakeup = 0; > + else > + honor_wakeup = 1; > + } > + > return 0; > } > > -- > 2.23.0 >
On Fri, Nov 22, 2019 at 08:23:34PM +0100, Hans de Goede wrote: > On some laptops enabling wakeup on the GPIO interrupts used for ACPI _AEI > event handling causes spurious wakeups. > > This commit adds a new honor_wakeup option, defaulting to true (our current > behavior), which can be used to disable wakeup on troublesome hardware > to avoid these spurious wakeups. > > This is a workaround for an architectural problem with s2idle under Linux > where we do not have any mechanism to immediately go back to sleep after > wakeup events, other then for embedded-controller events using the standard > ACPI EC interface, for details see: > https://lore.kernel.org/linux-acpi/61450f9b-cbc6-0c09-8b3a-aff6bf9a0b3c@redhat.com/ > > One series of laptops which is not able to suspend without this workaround > is the HP x2 10 Cherry Trail models, this commit adds a DMI based quirk > which makes sets honor_wakeup to false on these models. > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Hi, On 25-11-2019 10:25, Andy Shevchenko wrote: > On Fri, Nov 22, 2019 at 08:23:34PM +0100, Hans de Goede wrote: >> On some laptops enabling wakeup on the GPIO interrupts used for ACPI _AEI >> event handling causes spurious wakeups. >> >> This commit adds a new honor_wakeup option, defaulting to true (our current >> behavior), which can be used to disable wakeup on troublesome hardware >> to avoid these spurious wakeups. >> >> This is a workaround for an architectural problem with s2idle under Linux >> where we do not have any mechanism to immediately go back to sleep after >> wakeup events, other then for embedded-controller events using the standard >> ACPI EC interface, for details see: >> https://lore.kernel.org/linux-acpi/61450f9b-cbc6-0c09-8b3a-aff6bf9a0b3c@redhat.com/ >> >> One series of laptops which is not able to suspend without this workaround >> is the HP x2 10 Cherry Trail models, this commit adds a DMI based quirk >> which makes sets honor_wakeup to false on these models. > > I'm not against this approach (yeah, it seems we will always have a stream of > quirks for BIOS enabled platforms, especially cheapest ones), though last word > is by Rafael. > > Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Thanks. > One nit below, though. > >> >> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >> --- >> drivers/gpio/gpiolib-acpi.c | 33 ++++++++++++++++++++++++++++++++- >> 1 file changed, 32 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c >> index 2b47d906d536..9ce9b449ac4b 100644 >> --- a/drivers/gpio/gpiolib-acpi.c >> +++ b/drivers/gpio/gpiolib-acpi.c >> @@ -22,12 +22,18 @@ >> #include "gpiolib-acpi.h" >> >> #define QUIRK_NO_EDGE_EVENTS_ON_BOOT 0x01l >> +#define QUIRK_NO_WAKEUP 0x02l >> >> static int run_edge_events_on_boot = -1; >> module_param(run_edge_events_on_boot, int, 0444); >> MODULE_PARM_DESC(run_edge_events_on_boot, >> "Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto"); >> >> +static int honor_wakeup = -1; >> +module_param(honor_wakeup, int, 0444); >> +MODULE_PARM_DESC(honor_wakeup, >> + "Honor the ACPI wake-capable flag: 0=no, 1=yes, -1=auto"); >> + >> /** >> * struct acpi_gpio_event - ACPI GPIO event handler data >> * >> @@ -283,7 +289,8 @@ static acpi_status acpi_gpiochip_alloc_event(struct acpi_resource *ares, >> event->handle = evt_handle; >> event->handler = handler; >> event->irq = irq; >> - event->irq_is_wake = agpio->wake_capable == ACPI_WAKE_CAPABLE; > >> + if (honor_wakeup) >> + event->irq_is_wake = agpio->wake_capable == ACPI_WAKE_CAPABLE; > > Perhaps: > > event->irq_is_wake = honor_wakeup && agpio->wake_capable == ACPI_WAKE_CAPABLE; Yes that is better, I also noticed some typos in the comment explaining why the quirk is necessary, I will submit a v2 fixing both. Regards, Hans > (I don't care about 80 limit here) > >> event->pin = pin; >> event->desc = desc; >> >> @@ -1337,6 +1344,23 @@ static const struct dmi_system_id gpiolib_acpi_quirks[] = { >> }, >> .driver_data = (void *)QUIRK_NO_EDGE_EVENTS_ON_BOOT, >> }, >> + { >> + /* >> + * Various HP X2 10 Cherry Trail models use external >> + * embedded-controller connected via I2C + a ACPI GPIO >> + * event handler. The embedded controller generates various >> + * spurious wakeup events when suspended. So disable wakeup >> + * for its handler (it used the only ACPI GPIO event handler). >> + * This breaks wakeup when opening the lid, the user needs >> + * to press the power-button to wakeup the system. The >> + * alternative is suspend simply not working, which is worse. >> + */ >> + .matches = { >> + DMI_MATCH(DMI_SYS_VENDOR, "HP"), >> + DMI_MATCH(DMI_PRODUCT_NAME, "HP x2 Detachable 10-p0XX"), >> + }, >> + .driver_data = (void *)QUIRK_NO_WAKEUP, >> + }, >> {} /* Terminating entry */ >> }; >> >> @@ -1356,6 +1380,13 @@ static int acpi_gpio_setup_params(void) >> run_edge_events_on_boot = 1; >> } >> >> + if (honor_wakeup < 0) { >> + if (quirks & QUIRK_NO_WAKEUP) >> + honor_wakeup = 0; >> + else >> + honor_wakeup = 1; >> + } >> + >> return 0; >> } >> >> -- >> 2.23.0 >> >
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c index 2b47d906d536..9ce9b449ac4b 100644 --- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -22,12 +22,18 @@ #include "gpiolib-acpi.h" #define QUIRK_NO_EDGE_EVENTS_ON_BOOT 0x01l +#define QUIRK_NO_WAKEUP 0x02l static int run_edge_events_on_boot = -1; module_param(run_edge_events_on_boot, int, 0444); MODULE_PARM_DESC(run_edge_events_on_boot, "Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto"); +static int honor_wakeup = -1; +module_param(honor_wakeup, int, 0444); +MODULE_PARM_DESC(honor_wakeup, + "Honor the ACPI wake-capable flag: 0=no, 1=yes, -1=auto"); + /** * struct acpi_gpio_event - ACPI GPIO event handler data * @@ -283,7 +289,8 @@ static acpi_status acpi_gpiochip_alloc_event(struct acpi_resource *ares, event->handle = evt_handle; event->handler = handler; event->irq = irq; - event->irq_is_wake = agpio->wake_capable == ACPI_WAKE_CAPABLE; + if (honor_wakeup) + event->irq_is_wake = agpio->wake_capable == ACPI_WAKE_CAPABLE; event->pin = pin; event->desc = desc; @@ -1337,6 +1344,23 @@ static const struct dmi_system_id gpiolib_acpi_quirks[] = { }, .driver_data = (void *)QUIRK_NO_EDGE_EVENTS_ON_BOOT, }, + { + /* + * Various HP X2 10 Cherry Trail models use external + * embedded-controller connected via I2C + a ACPI GPIO + * event handler. The embedded controller generates various + * spurious wakeup events when suspended. So disable wakeup + * for its handler (it used the only ACPI GPIO event handler). + * This breaks wakeup when opening the lid, the user needs + * to press the power-button to wakeup the system. The + * alternative is suspend simply not working, which is worse. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP x2 Detachable 10-p0XX"), + }, + .driver_data = (void *)QUIRK_NO_WAKEUP, + }, {} /* Terminating entry */ }; @@ -1356,6 +1380,13 @@ static int acpi_gpio_setup_params(void) run_edge_events_on_boot = 1; } + if (honor_wakeup < 0) { + if (quirks & QUIRK_NO_WAKEUP) + honor_wakeup = 0; + else + honor_wakeup = 1; + } + return 0; }
On some laptops enabling wakeup on the GPIO interrupts used for ACPI _AEI event handling causes spurious wakeups. This commit adds a new honor_wakeup option, defaulting to true (our current behavior), which can be used to disable wakeup on troublesome hardware to avoid these spurious wakeups. This is a workaround for an architectural problem with s2idle under Linux where we do not have any mechanism to immediately go back to sleep after wakeup events, other then for embedded-controller events using the standard ACPI EC interface, for details see: https://lore.kernel.org/linux-acpi/61450f9b-cbc6-0c09-8b3a-aff6bf9a0b3c@redhat.com/ One series of laptops which is not able to suspend without this workaround is the HP x2 10 Cherry Trail models, this commit adds a DMI based quirk which makes sets honor_wakeup to false on these models. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/gpio/gpiolib-acpi.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-)