@@ -532,23 +532,27 @@ static int sunxi_pconf_group_set(struct pinctrl_dev *pctldev,
{
struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
struct sunxi_pinctrl_group *g = &pctl->groups[group];
- unsigned long flags;
unsigned pin = g->pin - pctl->desc->pin_base;
- u32 val, mask;
- u16 strength;
- u8 dlevel;
int i;
- spin_lock_irqsave(&pctl->lock, flags);
-
for (i = 0; i < num_configs; i++) {
- switch (pinconf_to_config_param(configs[i])) {
+ enum pin_config_param param;
+ unsigned long flags;
+ u32 offset, shift, mask, reg;
+ u16 arg, val;
+ int ret;
+
+ param = pinconf_to_config_param(configs[i]);
+ arg = pinconf_to_config_argument(configs[i]);
+
+ ret = sunxi_pconf_reg(pin, param, &offset, &shift, &mask);
+ if (ret < 0)
+ return ret;
+
+ switch (param) {
case PIN_CONFIG_DRIVE_STRENGTH:
- strength = pinconf_to_config_argument(configs[i]);
- if (strength > 40) {
- spin_unlock_irqrestore(&pctl->lock, flags);
+ if (arg < 10 || arg > 40)
return -EINVAL;
- }
/*
* We convert from mA to what the register expects:
* 0: 10mA
@@ -556,39 +560,33 @@ static int sunxi_pconf_group_set(struct pinctrl_dev *pctldev,
* 2: 30mA
* 3: 40mA
*/
- dlevel = strength / 10 - 1;
- val = readl(pctl->membase + sunxi_dlevel_reg(pin));
- mask = DLEVEL_PINS_MASK << sunxi_dlevel_offset(pin);
- writel((val & ~mask)
- | dlevel << sunxi_dlevel_offset(pin),
- pctl->membase + sunxi_dlevel_reg(pin));
+ val = arg / 10 - 1;
break;
case PIN_CONFIG_BIAS_DISABLE:
- val = readl(pctl->membase + sunxi_pull_reg(pin));
- mask = PULL_PINS_MASK << sunxi_pull_offset(pin);
- writel((val & ~mask),
- pctl->membase + sunxi_pull_reg(pin));
+ val = 0;
break;
case PIN_CONFIG_BIAS_PULL_UP:
- val = readl(pctl->membase + sunxi_pull_reg(pin));
- mask = PULL_PINS_MASK << sunxi_pull_offset(pin);
- writel((val & ~mask) | 1 << sunxi_pull_offset(pin),
- pctl->membase + sunxi_pull_reg(pin));
+ if (arg == 0)
+ return -EINVAL;
+ val = 1;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
- val = readl(pctl->membase + sunxi_pull_reg(pin));
- mask = PULL_PINS_MASK << sunxi_pull_offset(pin);
- writel((val & ~mask) | 2 << sunxi_pull_offset(pin),
- pctl->membase + sunxi_pull_reg(pin));
+ if (arg == 0)
+ return -EINVAL;
+ val = 2;
break;
default:
- break;
+ /* sunxi_pconf_reg should catch anything unsupported */
+ WARN_ON(1);
+ return -ENOTSUPP;
}
- /* cache the config value */
- g->config = configs[i];
- } /* for each config */
- spin_unlock_irqrestore(&pctl->lock, flags);
+ spin_lock_irqsave(&pctl->lock, flags);
+ reg = readl(pctl->membase + offset);
+ reg &= ~(mask << shift);
+ writel(reg | val << shift, pctl->membase + offset);
+ spin_unlock_irqrestore(&pctl->lock, flags);
+ } /* for each config */
return 0;
}
@@ -109,7 +109,6 @@ struct sunxi_pinctrl_function {
struct sunxi_pinctrl_group {
const char *name;
- unsigned long config;
unsigned pin;
};
The sunxi_pconf_reg helper introduced in the last patch gives us the chance to rework sunxi_pconf_group_set to have it match the structure of sunxi_pconf_(group_)get and make it easier to understand. For each config to set, it: 1. checks if the parameter is supported. 2. checks if the argument is within limits. 3. converts argument to the register value. 4. writes to the register with spinlock held. As a result the function now blocks unsupported config parameters, instead of silently ignoring them. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 66 +++++++++++++++++------------------ drivers/pinctrl/sunxi/pinctrl-sunxi.h | 1 - 2 files changed, 32 insertions(+), 35 deletions(-)