diff mbox series

[1/2] gpio: sch: Remove write-only core_base

Message ID 1d2dafa4bfcd485cf28bb8e3a6e169d220edf555.1555579429.git.jan.kiszka@siemens.com
State New
Headers show
Series gpio: sch: Interrupt support | expand

Commit Message

Jan Kiszka April 18, 2019, 9:23 a.m. UTC 
From: Jan Kiszka <jan.kiszka@siemens.com>

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
 drivers/gpio/gpio-sch.c | 5 -----
 1 file changed, 5 deletions(-)

Comments

Linus Walleij April 23, 2019, 11:09 a.m. UTC | #1 
On Thu, Apr 18, 2019 at 11:23 AM Jan Kiszka <jan.kiszka@siemens.com> wrote:

> From: Jan Kiszka <jan.kiszka@siemens.com>
>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>

Dead code I see.
Patch applied.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index c333046d02b8..fb143f28c386 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -23,7 +23,6 @@  struct sch_gpio {
 	struct gpio_chip chip;
 	spinlock_t lock;
 	unsigned short iobase;
-	unsigned short core_base;
 	unsigned short resume_base;
 };
 
@@ -166,7 +165,6 @@  static int sch_gpio_probe(struct platform_device *pdev)
 
 	switch (pdev->id) {
 	case PCI_DEVICE_ID_INTEL_SCH_LPC:
-		sch->core_base = 0;
 		sch->resume_base = 10;
 		sch->chip.ngpio = 14;
 
@@ -185,19 +183,16 @@  static int sch_gpio_probe(struct platform_device *pdev)
 		break;
 
 	case PCI_DEVICE_ID_INTEL_ITC_LPC:
-		sch->core_base = 0;
 		sch->resume_base = 5;
 		sch->chip.ngpio = 14;
 		break;
 
 	case PCI_DEVICE_ID_INTEL_CENTERTON_ILB:
-		sch->core_base = 0;
 		sch->resume_base = 21;
 		sch->chip.ngpio = 30;
 		break;
 
 	case PCI_DEVICE_ID_INTEL_QUARK_X1000_ILB:
-		sch->core_base = 0;
 		sch->resume_base = 2;
 		sch->chip.ngpio = 8;
 		break;