| Message ID | 1cb81e3d7a1b1f7ccf374952fa7e8d2147c186fb.1515698418.git.baruch@tkos.co.il |
|---|---|
| State | New |
| Headers | show |
| Series | gpio: driver for the RPi3 GPIO expander | expand |
Hi Baruch, > Baruch Siach <baruch@tkos.co.il> hat am 11. Januar 2018 um 20:44 geschrieben: > > > Add a description of the RPi3 GPIO expander that the VC4 firmware controls. > > Signed-off-by: Baruch Siach <baruch@tkos.co.il> > --- > v2: > * Move GPIO expander node out of the soc container > * Rename compatible string > * Add gpio-line-names property > --- > arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts > index b44b3b5af00d..24555e8a43ec 100644 > --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts > +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts > @@ -23,6 +23,16 @@ > gpios = <&gpio 47 0>; > }; > }; > + > + expgpio: gpio-expander { > + compatible = "raspberrypi,firmware-gpio"; > + gpio-controller; > + #gpio-cells = <2>; > + firmware = <&firmware>; > + gpio-line-names = "BT_ON", "WL_ON", "STATUS_LED", "LAN_RUN", > + "HPD_N", "CAM_GPIO0", "CAM_GPIO1", "PWR_LOW_N"; please one GPIO name per line like in the other files. This makes it easier to review changes and add comments. Stefan > + status = "okay"; > + }; > }; > > /* uart0 communicates with the BT module */ > -- > 2.15.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index b44b3b5af00d..24555e8a43ec 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -23,6 +23,16 @@ gpios = <&gpio 47 0>; }; }; + + expgpio: gpio-expander { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + firmware = <&firmware>; + gpio-line-names = "BT_ON", "WL_ON", "STATUS_LED", "LAN_RUN", + "HPD_N", "CAM_GPIO0", "CAM_GPIO1", "PWR_LOW_N"; + status = "okay"; + }; }; /* uart0 communicates with the BT module */
Add a description of the RPi3 GPIO expander that the VC4 firmware controls. Signed-off-by: Baruch Siach <baruch@tkos.co.il> --- v2: * Move GPIO expander node out of the soc container * Rename compatible string * Add gpio-line-names property --- arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 10 ++++++++++ 1 file changed, 10 insertions(+)