diff mbox series

[V2,2/3] dt-bindings: pinctrl: qcom-pmic-gpio: Update the binding to add four new variants

Message ID 1617280546-9583-3-git-send-email-skakit@codeaurora.org
State New
Headers show
Series Add GPIO support for PM7325, PM8350c, PMK8350 and PMR735A | expand

Commit Message

Satya Priya April 1, 2021, 12:35 p.m. UTC 
Update the binding to add PM7325, PM8350C, PMK8350 and PMR735A GPIO support.

Signed-off-by: satya priya <skakit@codeaurora.org>
---
Changes in V2:
 - Placed this patch before conversion patch and updated commit text
   to be more clear.

 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
index 7648ab0..da7c35e 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -30,6 +30,10 @@  PMIC's from Qualcomm.
 		    "qcom,pm6150-gpio"
 		    "qcom,pm6150l-gpio"
 		    "qcom,pmx55-gpio"
+		    "qcom,pm7325-gpio"
+		    "qcom,pm8350c-gpio"
+		    "qcom,pmk8350-gpio"
+		    "qcom,pmr735a-gpio"
 
 		    And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
 		    if the device is on an spmi bus or an ssbi bus respectively
@@ -113,6 +117,10 @@  to specify in a pin configuration subnode:
 		    gpio1-gpio12 for pm6150l
 		    gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10
 					    and gpio11)
+		    gpio1-gpio10 for pm7325
+		    gpio1-gpio9 for pm8350c
+		    gpio1-gpio4 for pmk8350
+		    gpio1-gpio4 for pmr735a
 
 - function:
 	Usage: required