diff mbox

[v2,03/12] Document: dt: binding: imx: update clock doc for imx6sll

Message ID 1482832070-22668-4-git-send-email-ping.bai@nxp.com
State New
Headers show

Commit Message

Jacky Bai Dec. 27, 2016, 9:47 a.m. UTC
Add clock binding doc uppdate for imx6sll.

Signed-off-by: Bai Ping <ping.bai@nxp.com>
---
 .../devicetree/bindings/clock/imx6sll-clock.txt    | 37 ++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt

Comments

Rob Herring Jan. 3, 2017, 5:48 p.m. UTC | #1
On Tue, Dec 27, 2016 at 05:47:41PM +0800, Bai Ping wrote:
> Add clock binding doc uppdate for imx6sll.

s/uppdate/update/

> 
> Signed-off-by: Bai Ping <ping.bai@nxp.com>
> ---
>  .../devicetree/bindings/clock/imx6sll-clock.txt    | 37 ++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> new file mode 100644
> index 0000000..3a46787
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> @@ -0,0 +1,37 @@
> +* Clock bindings for Freescale i.MX6 SLL
> +
> +Required properties:
> +- compatible: Should be "fsl,imx6sll-ccm"
> +- reg: Address and length of the register set
> +- #clock-cells: Should be <1>
> +- clocks: list of clock specifiers, must contain an entry for each required
> +  entry in clock-names
> +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
> +
> +The clock consumer should specify the desired clock by having the clock
> +ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sll-clock.h
> +for the full list of i.MX6 SLL clock IDs.
> +
> +Examples:
> +
> +#include <dt-bindings/clock/imx6sll-clock.h>
> +
> +clks: ccm@020c4000 {

Drop leading 0s.

> +		compatible = "fsl,imx6sll-ccm";
> +		reg = <0x020c4000 0x4000>;
> +		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> +		#clock-cells = <1>;
> +		clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
> +		clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
> +};
> +
> +uart1: serial@02020000 {

ditto.

> +		compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
> +		reg = <0x02020000 0x4000>;
> +		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
> +			 <&clks IMX6SLL_CLK_UART1_SERIAL>;
> +		clock-names = "ipg", "per";
> +		status = "disabled";
> +};
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
new file mode 100644
index 0000000..3a46787
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
@@ -0,0 +1,37 @@ 
+* Clock bindings for Freescale i.MX6 SLL
+
+Required properties:
+- compatible: Should be "fsl,imx6sll-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- clocks: list of clock specifiers, must contain an entry for each required
+  entry in clock-names
+- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sll-clock.h
+for the full list of i.MX6 SLL clock IDs.
+
+Examples:
+
+#include <dt-bindings/clock/imx6sll-clock.h>
+
+clks: ccm@020c4000 {
+		compatible = "fsl,imx6sll-ccm";
+		reg = <0x020c4000 0x4000>;
+		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+		#clock-cells = <1>;
+		clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+		clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+};
+
+uart1: serial@02020000 {
+		compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+		reg = <0x02020000 0x4000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
+			 <&clks IMX6SLL_CLK_UART1_SERIAL>;
+		clock-names = "ipg", "per";
+		status = "disabled";
+};