diff mbox

[v2] gpio: bcm-kona: Implement get_direction callback

Message ID 1428911760.25188.0.camel@phoenix
State New
Headers show

Commit Message

Axel Lin April 13, 2015, 7:56 a.m. UTC
Implement gpio_chip's get_direction() callback, that lets other drivers get
particular GPIOs direction using gpiod_get_direction().

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
v2: Make bcm_kona_gpio_get_dir explicitly return GPIOF_DIR_IN or GPIOF_DIR_OUT.

 drivers/gpio/gpio-bcm-kona.c | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

Comments

Ray Jui April 13, 2015, 7:09 p.m. UTC | #1
On 4/13/2015 12:56 AM, Axel Lin wrote:
> Implement gpio_chip's get_direction() callback, that lets other drivers get
> particular GPIOs direction using gpiod_get_direction().
> 
> Signed-off-by: Axel Lin <axel.lin@ingics.com>
> ---
> v2: Make bcm_kona_gpio_get_dir explicitly return GPIOF_DIR_IN or GPIOF_DIR_OUT.
> 
>  drivers/gpio/gpio-bcm-kona.c | 26 ++++++++++++++++----------
>  1 file changed, 16 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
> index b164ce8..a6e7922 100644
> --- a/drivers/gpio/gpio-bcm-kona.c
> +++ b/drivers/gpio/gpio-bcm-kona.c
> @@ -122,6 +122,16 @@ static void bcm_kona_gpio_unlock_gpio(struct bcm_kona_gpio *kona_gpio,
>  	spin_unlock_irqrestore(&kona_gpio->lock, flags);
>  }
>  
> +static int bcm_kona_gpio_get_dir(struct gpio_chip *chip, unsigned gpio)
> +{
> +	struct bcm_kona_gpio *kona_gpio = to_kona_gpio(chip);
> +	void __iomem *reg_base = kona_gpio->reg_base;
> +	u32 val;
> +
> +	val = readl(reg_base + GPIO_CONTROL(gpio)) & GPIO_GPCTR0_IOTR_MASK;
> +	return val ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
> +}
> +
>  static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
>  {
>  	struct bcm_kona_gpio *kona_gpio;
> @@ -135,12 +145,8 @@ static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
>  	reg_base = kona_gpio->reg_base;
>  	spin_lock_irqsave(&kona_gpio->lock, flags);
>  
> -	/* determine the GPIO pin direction */
> -	val = readl(reg_base + GPIO_CONTROL(gpio));
> -	val &= GPIO_GPCTR0_IOTR_MASK;
> -
>  	/* this function only applies to output pin */
> -	if (GPIO_GPCTR0_IOTR_CMD_INPUT == val)
> +	if (bcm_kona_gpio_get_dir(chip, gpio) == GPIOF_DIR_IN)
>  		goto out;
>  
>  	reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
> @@ -166,13 +172,12 @@ static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio)
>  	reg_base = kona_gpio->reg_base;
>  	spin_lock_irqsave(&kona_gpio->lock, flags);
>  
> -	/* determine the GPIO pin direction */
> -	val = readl(reg_base + GPIO_CONTROL(gpio));
> -	val &= GPIO_GPCTR0_IOTR_MASK;
> +	if (bcm_kona_gpio_get_dir(chip, gpio) == GPIOF_DIR_IN)
> +		reg_offset = GPIO_IN_STATUS(bank_id);
> +	else
> +		reg_offset = GPIO_OUT_STATUS(bank_id);
>  
>  	/* read the GPIO bank status */
> -	reg_offset = (GPIO_GPCTR0_IOTR_CMD_INPUT == val) ?
> -	    GPIO_IN_STATUS(bank_id) : GPIO_OUT_STATUS(bank_id);
>  	val = readl(reg_base + reg_offset);
>  
>  	spin_unlock_irqrestore(&kona_gpio->lock, flags);
> @@ -310,6 +315,7 @@ static struct gpio_chip template_chip = {
>  	.owner = THIS_MODULE,
>  	.request = bcm_kona_gpio_request,
>  	.free = bcm_kona_gpio_free,
> +	.get_direction = bcm_kona_gpio_get_dir,
>  	.direction_input = bcm_kona_gpio_direction_input,
>  	.get = bcm_kona_gpio_get,
>  	.direction_output = bcm_kona_gpio_direction_output,
> 

This change looks good to me!

Reviewed-by: Ray Jui <rjui@broadcom.com>

Thanks!

Ray

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Linus Walleij April 27, 2015, 1:30 p.m. UTC | #2
On Mon, Apr 13, 2015 at 9:56 AM, Axel Lin <axel.lin@ingics.com> wrote:

> Implement gpio_chip's get_direction() callback, that lets other drivers get
> particular GPIOs direction using gpiod_get_direction().
>
> Signed-off-by: Axel Lin <axel.lin@ingics.com>
> ---
> v2: Make bcm_kona_gpio_get_dir explicitly return GPIOF_DIR_IN or GPIOF_DIR_OUT.

Patch applied with Ray's review tag.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index b164ce8..a6e7922 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -122,6 +122,16 @@  static void bcm_kona_gpio_unlock_gpio(struct bcm_kona_gpio *kona_gpio,
 	spin_unlock_irqrestore(&kona_gpio->lock, flags);
 }
 
+static int bcm_kona_gpio_get_dir(struct gpio_chip *chip, unsigned gpio)
+{
+	struct bcm_kona_gpio *kona_gpio = to_kona_gpio(chip);
+	void __iomem *reg_base = kona_gpio->reg_base;
+	u32 val;
+
+	val = readl(reg_base + GPIO_CONTROL(gpio)) & GPIO_GPCTR0_IOTR_MASK;
+	return val ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
+}
+
 static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
 {
 	struct bcm_kona_gpio *kona_gpio;
@@ -135,12 +145,8 @@  static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
 	reg_base = kona_gpio->reg_base;
 	spin_lock_irqsave(&kona_gpio->lock, flags);
 
-	/* determine the GPIO pin direction */
-	val = readl(reg_base + GPIO_CONTROL(gpio));
-	val &= GPIO_GPCTR0_IOTR_MASK;
-
 	/* this function only applies to output pin */
-	if (GPIO_GPCTR0_IOTR_CMD_INPUT == val)
+	if (bcm_kona_gpio_get_dir(chip, gpio) == GPIOF_DIR_IN)
 		goto out;
 
 	reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
@@ -166,13 +172,12 @@  static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio)
 	reg_base = kona_gpio->reg_base;
 	spin_lock_irqsave(&kona_gpio->lock, flags);
 
-	/* determine the GPIO pin direction */
-	val = readl(reg_base + GPIO_CONTROL(gpio));
-	val &= GPIO_GPCTR0_IOTR_MASK;
+	if (bcm_kona_gpio_get_dir(chip, gpio) == GPIOF_DIR_IN)
+		reg_offset = GPIO_IN_STATUS(bank_id);
+	else
+		reg_offset = GPIO_OUT_STATUS(bank_id);
 
 	/* read the GPIO bank status */
-	reg_offset = (GPIO_GPCTR0_IOTR_CMD_INPUT == val) ?
-	    GPIO_IN_STATUS(bank_id) : GPIO_OUT_STATUS(bank_id);
 	val = readl(reg_base + reg_offset);
 
 	spin_unlock_irqrestore(&kona_gpio->lock, flags);
@@ -310,6 +315,7 @@  static struct gpio_chip template_chip = {
 	.owner = THIS_MODULE,
 	.request = bcm_kona_gpio_request,
 	.free = bcm_kona_gpio_free,
+	.get_direction = bcm_kona_gpio_get_dir,
 	.direction_input = bcm_kona_gpio_direction_input,
 	.get = bcm_kona_gpio_get,
 	.direction_output = bcm_kona_gpio_direction_output,