From patchwork Thu Sep 25 05:50:12 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Muthu Mani X-Patchwork-Id: 393253 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 84DD41400B2 for ; Thu, 25 Sep 2014 16:05:51 +1000 (EST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1750793AbaIYGFt (ORCPT ); Thu, 25 Sep 2014 02:05:49 -0400 Received: from mail-bn1bon0137.outbound.protection.outlook.com ([157.56.111.137]:56175 "EHLO na01-bn1-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1750774AbaIYGFt (ORCPT ); Thu, 25 Sep 2014 02:05:49 -0400 Received: from prji-Latitude-E6420.india.cypress.com (121.243.89.10) by CO1PR06MB078.namprd06.prod.outlook.com (10.242.164.20) with Microsoft SMTP Server (TLS) id 15.0.1034.13; Thu, 25 Sep 2014 05:50:09 +0000 From: Muthu Mani To: Samuel Ortiz , Lee Jones , Wolfram Sang , , Linus Walleij , Alexandre Courbot , , , CC: , Muthu Mani , Rajaram Regupathy , Johan Hovold Subject: [PATCH v2 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller Date: Thu, 25 Sep 2014 11:20:12 +0530 Message-ID: <1411624212-5515-1-git-send-email-muth@cypress.com> X-Mailer: git-send-email 1.8.3.2 MIME-Version: 1.0 X-Originating-IP: [121.243.89.10] X-ClientProxiedBy: DM2PR00CA0026.namprd00.prod.outlook.com (25.160.243.36) To CO1PR06MB078.namprd06.prod.outlook.com (10.242.164.20) X-Microsoft-Antispam: UriScan:; X-Microsoft-Antispam: BCL:0;PCL:0;RULEID:;SRVR:CO1PR06MB078; X-Forefront-PRVS: 0345CFD558 X-Forefront-Antispam-Report: SFV:NSPM; SFS:(10019020)(6009001)(199003)(189002)(102836001)(86362001)(50226001)(50466002)(19580395003)(85852003)(74502003)(88136002)(47776003)(93916002)(89996001)(42186005)(15975445006)(62966002)(33646002)(46102003)(87976001)(90102001)(120916001)(81542003)(99396003)(85306004)(80022003)(4396001)(74662003)(77982003)(87286001)(81342003)(64706001)(21056001)(79102003)(76482002)(107046002)(50986999)(2201001)(77096002)(229853001)(83322001)(36756003)(19580405001)(20776003)(31966008)(105586002)(83072002)(15202345003)(97736003)(77156001)(10300001)(48376002)(66066001)(92726001)(104166001)(101416001)(106356001)(92566001)(95666004); DIR:OUT; SFP:1102; SCL:1; SRVR:CO1PR06MB078; H:prji-Latitude-E6420.india.cypress.com; FPR:; MLV:sfv; PTR:InfoNoRecords; A:1; MX:1; LANG:en; X-OriginatorOrg: cypress.com Sender: linux-gpio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Adds support for USB-I2C/GPIO interfaces of Cypress Semiconductor CYUSBS234 USB-Serial Bridge controller. Details about the device can be found at: http://www.cypress.com/?rID=84126 Signed-off-by: Muthu Mani Signed-off-by: Rajaram Regupathy --- drivers/mfd/Kconfig | 12 +++ drivers/mfd/Makefile | 1 + drivers/mfd/cyusbs23x.c | 190 ++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/cyusbs23x.h | 57 +++++++++++++ 4 files changed, 260 insertions(+) create mode 100644 drivers/mfd/cyusbs23x.c create mode 100644 include/linux/mfd/cyusbs23x.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index de5abf2..a31e9e3 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -116,6 +116,18 @@ config MFD_ASIC3 This driver supports the ASIC3 multifunction chip found on many PDAs (mainly iPAQ and HTC based ones) +config MFD_CYUSBS23X + tristate "Cypress CYUSBS23x USB Serial Bridge controller" + select MFD_CORE + depends on USB + default n + help + Say yes here if you want support for Cypress Semiconductor + CYUSBS23x USB-Serial Bridge controller. + + This driver can also be built as a module. If so, the module will be + called cyusbs23x. + config PMIC_DA903X bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" depends on I2C=y diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index f001487..fc5bcd1 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -151,6 +151,7 @@ si476x-core-y := si476x-cmd.o si476x-prop.o si476x-i2c.o obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o +obj-$(CONFIG_MFD_CYUSBS23X) += cyusbs23x.o obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o diff --git a/drivers/mfd/cyusbs23x.c b/drivers/mfd/cyusbs23x.c new file mode 100644 index 0000000..cf2d53b --- /dev/null +++ b/drivers/mfd/cyusbs23x.c @@ -0,0 +1,190 @@ +/* + * Cypress USB-Serial Bridge Controller USB adapter driver + * + * Copyright (c) 2014 Cypress Semiconductor Corporation. + * + * Author: + * Muthu Mani + * + * Additional contributors include: + * Rajaram Regupathy + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +/* + * This is core MFD driver for Cypress Semiconductor CYUSBS234 USB-Serial + * Bridge controller. CYUSBS234 offers a single channel serial interface + * (I2C/SPI/UART). It can be configured to enable either of I2C, SPI, UART + * interfaces. The GPIOs are also available to access. + * Details about the device can be found at: + * http://www.cypress.com/?rID=84126 + * + * Separate cell drivers are available for I2C and GPIO. SPI and UART are not + * supported yet. All GPIOs are exposed for get operation. However, only + * unused GPIOs can be set. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +static const struct usb_device_id cyusbs23x_usb_table[] = { + { USB_DEVICE(0x04b4, 0x0004) }, /* Cypress Semiconductor */ + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, cyusbs23x_usb_table); + +static const struct mfd_cell cyusbs23x_i2c_devs[] = { + { + .name = "cyusbs23x-i2c", + }, + { + .name = "cyusbs23x-gpio", + }, +}; + +static int update_ep_details(struct usb_interface *interface, + struct cyusbs23x *cyusbs) +{ + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *ep; + int i; + + dev_dbg(&interface->dev, "%s\n", __func__); + + iface_desc = interface->cur_altsetting; + + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + + dev_dbg(&interface->dev, "%s %d/%d\n", + __func__, i, iface_desc->desc.bNumEndpoints); + + ep = &iface_desc->endpoint[i].desc; + + if (!cyusbs->bulk_in_ep_num && + usb_endpoint_is_bulk_in(ep)) { + cyusbs->bulk_in_ep_num = ep->bEndpointAddress; + } + if (!cyusbs->bulk_out_ep_num && + usb_endpoint_is_bulk_out(ep)) { + cyusbs->bulk_out_ep_num = ep->bEndpointAddress; + } + if (!cyusbs->intr_in_ep_num && + usb_endpoint_is_int_in(ep)) { + cyusbs->intr_in_ep_num = ep->bEndpointAddress; + } + } + + dev_dbg(&interface->dev, "%s %d, %d, %d\n", + __func__, cyusbs->intr_in_ep_num , + cyusbs->bulk_in_ep_num, cyusbs->bulk_out_ep_num); + + if (!cyusbs->bulk_in_ep_num || !cyusbs->bulk_out_ep_num || + !cyusbs->intr_in_ep_num) + return -ENODEV; + + return 0; +} + +static int cyusbs23x_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct cyusbs23x *cyusbs; + const struct mfd_cell *cyusbs23x_devs; + int ret, mfd_id, ndevs = 0; + u8 sub_class; + + cyusbs = kzalloc(sizeof(*cyusbs), GFP_KERNEL); + if (cyusbs == NULL) + return -ENOMEM; + + mutex_init(&cyusbs->lock); + + cyusbs->usb_dev = usb_get_dev(interface_to_usbdev(interface)); + cyusbs->usb_intf = interface; + cyusbs->intf_num = interface->cur_altsetting->desc.bInterfaceNumber; + + ret = update_ep_details(interface, cyusbs); + if (ret < 0) { + dev_err(&interface->dev, "invalid interface\n"); + goto error; + } + + usb_set_intfdata(interface, cyusbs); + + dev_dbg(&interface->dev, + "binding to %02x:%02x, in bus %03d address %03d\n", + le16_to_cpu(cyusbs->usb_dev->descriptor.idVendor), + le16_to_cpu(cyusbs->usb_dev->descriptor.idProduct), + cyusbs->usb_dev->bus->busnum, + cyusbs->usb_dev->devnum); + + sub_class = interface->cur_altsetting->desc.bInterfaceSubClass; + switch (sub_class) { + case CY_USBS_SCB_I2C: + dev_dbg(&interface->dev, "I2C interface found\n"); + cyusbs23x_devs = cyusbs23x_i2c_devs; + ndevs = ARRAY_SIZE(cyusbs23x_i2c_devs); + break; + default: + dev_err(&interface->dev, "unsupported subclass\n"); + ret = -ENODEV; + goto error; + } + + mfd_id = cyusbs->usb_dev->bus->busnum << 16 | + cyusbs->usb_dev->devnum << 8 | cyusbs->intf_num; + ret = mfd_add_devices(&interface->dev, mfd_id, cyusbs23x_devs, + ndevs, NULL, 0, NULL); + if (ret != 0) { + dev_err(&interface->dev, "Failed to add mfd devices to core\n"); + goto error; + } + + return 0; + +error: + usb_set_intfdata(interface, NULL); + usb_put_dev(cyusbs->usb_dev); + kfree(cyusbs); + + return ret; +} + +static void cyusbs23x_disconnect(struct usb_interface *interface) +{ + struct cyusbs23x *cyusbs = usb_get_intfdata(interface); + + mfd_remove_devices(&interface->dev); + usb_set_intfdata(interface, NULL); + usb_put_dev(cyusbs->usb_dev); + kfree(cyusbs); + + dev_dbg(&interface->dev, "disconnected\n"); +} + +static struct usb_driver cyusbs23x_usb_driver = { + .name = "cyusbs23x", + .probe = cyusbs23x_probe, + .disconnect = cyusbs23x_disconnect, + .id_table = cyusbs23x_usb_table, +}; + +module_usb_driver(cyusbs23x_usb_driver); + +MODULE_AUTHOR("Rajaram Regupathy "); +MODULE_AUTHOR("Muthu Mani "); +MODULE_DESCRIPTION("CYUSBS23x driver v0.1"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/cyusbs23x.h b/include/linux/mfd/cyusbs23x.h new file mode 100644 index 0000000..0b71825 --- /dev/null +++ b/include/linux/mfd/cyusbs23x.h @@ -0,0 +1,57 @@ +/* + * Cypress USB-Serial Bridge Controller definitions + * + * Copyright (c) 2014 Cypress Semiconductor Corporation. + * + * Author: + * Muthu Mani + * + * Additional contributors include: + * Rajaram Regupathy + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef __MFD_CYUSBS23X_H__ +#define __MFD_CYUSBS23X_H__ + +#include +#include + +/* Structure to hold all device specific stuff */ +struct cyusbs23x { + struct usb_device *usb_dev; + struct usb_interface *usb_intf; + struct mutex lock; + + u8 intf_num; + u8 bulk_in_ep_num; + u8 bulk_out_ep_num; + u8 intr_in_ep_num; +}; + +enum cy_vendor_cmds { + CY_I2C_GET_CONFIG_CMD = 0xC4, + CY_I2C_SET_CONFIG_CMD = 0xC5, + CY_I2C_WRITE_CMD = 0xC6, + CY_I2C_READ_CMD = 0xC7, + CY_I2C_GET_STATUS_CMD = 0xC8, + CY_I2C_RESET_CMD = 0xC9, + CY_GPIO_GET_CONFIG_CMD = 0xD8, + CY_GPIO_SET_CONFIG_CMD = 0xD9, + CY_GPIO_GET_VALUE_CMD = 0xDA, + CY_GPIO_SET_VALUE_CMD = 0xDB, +}; + +enum cy_scb_modes { + CY_USBS_SCB_DISABLED = 0, + CY_USBS_SCB_UART = 1, + CY_USBS_SCB_SPI = 2, + CY_USBS_SCB_I2C = 3 +}; + +#define CY_SCB_INDEX_POS 15 + +#endif /* __MFD_CYUSBS23X_H__ */