Show patches with: State = Action Required       |   32383 patches
« 1 2 ... 9 10 11 … 323 324 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[RESEND,1/2] gpiolib: Introduce gpiod_device_add_link() leds: gpio: Add devlink between the leds-gpio device and the gpio used. - - - - --- 2024-02-20 Herve Codina New
[2/2] leds: gpio: Add devlinks between the gpio consumed and the gpio leds device leds: gpio: Add devlink between the leds-gpio device and the gpio used. - - - - --- 2024-02-20 Herve Codina New
[1/2] gpiolib: Introduce gpiod_device_add_link() leds: gpio: Add devlink between the leds-gpio device and the gpio used. - - - - --- 2024-02-20 Herve Codina New
[2/2] gpiolib: cdev: release IRQs when the gpio chip device is removed gpio-cdev: Release IRQ used by gpio-cdev on gpio chip removal - - - - --- 2024-02-20 Herve Codina New
[1/2] gpiolib: call gcdev_unregister() sooner in the removal operations gpio-cdev: Release IRQ used by gpio-cdev on gpio chip removal - - - - --- 2024-02-20 Herve Codina New
[v13,3/3] iio: adc: ad7173: add AD7173 driver [v13,1/3] dt-bindings: adc: add AD7173 - - 3 - --- 2024-02-20 Ceclan, Dumitru New
[v13,2/3] iio: adc: ad_sigma_delta: Add optional irq selection [v13,1/3] dt-bindings: adc: add AD7173 - - - - --- 2024-02-20 Ceclan, Dumitru New
[v13,1/3] dt-bindings: adc: add AD7173 [v13,1/3] dt-bindings: adc: add AD7173 - - 1 - --- 2024-02-20 Ceclan, Dumitru New
gpio: constify of_phandle_args in of_find_gpio_device_by_xlate() gpio: constify of_phandle_args in of_find_gpio_device_by_xlate() - - - - --- 2024-02-20 Krzysztof Kozlowski New
[RFC,v2,6/6] riscv: dts: starfive: jh8100: add pinctrl device tree nodes Add Pinctrl driver for Starfive JH8100 SoC - - - - --- 2024-02-20 Yuklin Soo New
[RFC,v2,5/6] pinctrl: starfive: jh8100: add pinctrl driver for AON domain Add Pinctrl driver for Starfive JH8100 SoC - - - - --- 2024-02-20 Yuklin Soo New
[RFC,v2,4/6] pinctrl: starfive: jh8100: add pinctrl driver for sys_gmac domain Add Pinctrl driver for Starfive JH8100 SoC - - - - --- 2024-02-20 Yuklin Soo New
[RFC,v2,3/6] pinctrl: starfive: jh8100: add pinctrl driver for sys_west domain Add Pinctrl driver for Starfive JH8100 SoC - - - - --- 2024-02-20 Yuklin Soo New
[RFC,v2,2/6] pinctrl: starfive: jh8100: add main and sys_east driver Add Pinctrl driver for Starfive JH8100 SoC - - - - --- 2024-02-20 Yuklin Soo New
[RFC,v2,1/6] dt-bindings: pinctrl: starfive: Add JH8100 pinctrl Add Pinctrl driver for Starfive JH8100 SoC - - - - --- 2024-02-20 Yuklin Soo New
dt-bindings: gpio: Convert Aspeed binding to YAML schema dt-bindings: gpio: Convert Aspeed binding to YAML schema - - - - --- 2024-02-20 Andrew Jeffery New
[v2] gpio: Add ChromeOS EC GPIO driver [v2] gpio: Add ChromeOS EC GPIO driver - - 1 - --- 2024-02-20 Stephen Boyd New
[v5,4/4] pinctrl: nuvoton: Add ma35d1 pinctrl and GPIO driver Add support for nuvoton ma35d1 pin control - - - - --- 2024-02-20 Jacky Huang New
[v5,3/4] arm64: dts: nuvoton: Add pinctrl support for ma35d1 Add support for nuvoton ma35d1 pin control - - - - --- 2024-02-20 Jacky Huang New
[v5,2/4] dt-bindings: pinctrl: Document nuvoton ma35d1 pin control Add support for nuvoton ma35d1 pin control - - 1 - --- 2024-02-20 Jacky Huang New
[v5,1/4] dt-bindings: reset: Add syscon to nuvoton ma35d1 system-management node Add support for nuvoton ma35d1 pin control 2 - - - --- 2024-02-20 Jacky Huang New
[v1] gpiolib: Handle no pin_ranges in gpiochip_generic_config() [v1] gpiolib: Handle no pin_ranges in gpiochip_generic_config() - 1 1 1 --- 2024-02-19 Emil Renner Berthing New
gpio: fix memory leak in gpiod_request_commit() gpio: fix memory leak in gpiod_request_commit() - 1 - - --- 2024-02-18 Bartosz Golaszewski New
[linux-next,1/1] gpio: Delete excess allocated label memory [linux-next,1/1] gpio: Delete excess allocated label memory - 1 - - --- 2024-02-17 xiaolei wang New
phy: constify of_phandle_args in xlate phy: constify of_phandle_args in xlate 3 - - - --- 2024-02-17 Krzysztof Kozlowski New
interconnect: constify of_phandle_args in xlate interconnect: constify of_phandle_args in xlate 2 - - - --- 2024-02-16 Krzysztof Kozlowski New
gpio: constify opaque pointer "data" in gpio_device_find() gpio: constify opaque pointer "data" in gpio_device_find() - - - - --- 2024-02-16 Krzysztof Kozlowski New
gpio: cdev: avoid uninitialized variable dereference gpio: cdev: avoid uninitialized variable dereference - 1 - - --- 2024-02-16 Arnd Bergmann New
[GIT,PULL] gpio: fixes for v6.8-rc5 [GIT,PULL] gpio: fixes for v6.8-rc5 - - - - --- 2024-02-16 Bartosz Golaszewski New
gpio: cdev: fix a NULL-pointer dereference with DEBUG enabled gpio: cdev: fix a NULL-pointer dereference with DEBUG enabled - 1 - 1 --- 2024-02-16 Bartosz Golaszewski New
pinctrl: qcom: sm8650-lpass-lpi: correct Kconfig name pinctrl: qcom: sm8650-lpass-lpi: correct Kconfig name - 1 1 - --- 2024-02-16 Krzysztof Kozlowski New
[v3,18/18] PCI: j721e: add suspend and resume support Add suspend to ram support for PCIe on J7200 - - - - --- 2024-02-15 Thomas Richard New
[v3,17/18] PCI: j721e: add reset GPIO to struct j721e_pcie Add suspend to ram support for PCIe on J7200 - - - - --- 2024-02-15 Thomas Richard New
[v3,16/18] PCI: cadence: set cdns_pcie_host_init() global Add suspend to ram support for PCIe on J7200 - - 1 - --- 2024-02-15 Thomas Richard New
[v3,15/18] PCI: cadence: extract link setup sequence from cdns_pcie_host_setup() Add suspend to ram support for PCIe on J7200 - - 1 - --- 2024-02-15 Thomas Richard New
[v3,14/18] phy: cadence-torrent: add suspend and resume support Add suspend to ram support for PCIe on J7200 - - - - --- 2024-02-15 Thomas Richard New
[v3,13/18] phy: cadence-torrent: remove noop_ops phy operations Add suspend to ram support for PCIe on J7200 - - - - --- 2024-02-15 Thomas Richard New
[v3,12/18] phy: cadence-torrent: add already_configured to struct cdns_torrent_phy Add suspend to ram support for PCIe on J7200 - - - - --- 2024-02-15 Thomas Richard New
[v3,11/18] phy: cadence-torrent: register resets even if the phy is already configured Add suspend to ram support for PCIe on J7200 - - - - --- 2024-02-15 Thomas Richard New
[v3,10/18] phy: cadence-torrent: extract calls to clk_get from cdns_torrent_clk Add suspend to ram support for PCIe on J7200 - - - - --- 2024-02-15 Thomas Richard New
[v3,09/18] phy: ti: phy-j721e-wiz: add resume support Add suspend to ram support for PCIe on J7200 - - - - --- 2024-02-15 Thomas Richard New
[v3,08/18] phy: ti: phy-j721e-wiz: split wiz_clock_init() function Add suspend to ram support for PCIe on J7200 - - - - --- 2024-02-15 Thomas Richard New
[v3,07/18] phy: ti: phy-j721e-wiz: use dev_err_probe() instead of dev_err() Add suspend to ram support for PCIe on J7200 - - - - --- 2024-02-15 Thomas Richard New
[v3,06/18] mux: mmio: add resume support Add suspend to ram support for PCIe on J7200 - - - - --- 2024-02-15 Thomas Richard New
[v3,05/18] mux: add mux_chip_resume() function Add suspend to ram support for PCIe on J7200 - - - - --- 2024-02-15 Thomas Richard New
[v3,04/18] i2c: omap: wakeup the controller during suspend() callback Add suspend to ram support for PCIe on J7200 - - - - --- 2024-02-15 Thomas Richard New
[v3,03/18] pinctrl: pinctrl-single: move suspend()/resume() callbacks to noirq Add suspend to ram support for PCIe on J7200 - - 2 - --- 2024-02-15 Thomas Richard New
[v3,02/18] pinctrl: pinctrl-single: remove dead code in suspend() and resume() callbacks Add suspend to ram support for PCIe on J7200 - - - - --- 2024-02-15 Thomas Richard New
[v3,01/18] gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq() Add suspend to ram support for PCIe on J7200 1 - 3 - --- 2024-02-15 Thomas Richard New
[v2,2/2] pinctrl: renesas: rzg2l: Add suspend/resume support pinctrl: renesas: rzg2l: Add suspend to RAM support - - 1 - --- 2024-02-15 claudiu beznea New
[v2,1/2] pinctrl: renesas: Select CONFIG_IRQ_DOMAIN_HIERARCHY for pinctrl-rzg2l pinctrl: renesas: rzg2l: Add suspend to RAM support - - 1 - --- 2024-02-15 claudiu beznea New
[2/2] gpio: sim: use for_each_gpio() [1/2] gpio: provide for_each_gpio() - - 1 - --- 2024-02-15 Bartosz Golaszewski New
[1/2] gpio: provide for_each_gpio() [1/2] gpio: provide for_each_gpio() - - 1 - --- 2024-02-15 Bartosz Golaszewski New
[23/23] MIPS: mobileye: eyeq5: map GPIOs to pins using gpio-ranges Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - - --- 2024-02-14 Théo Lebrun New
[22/23] MIPS: mobileye: eyeq5: add resets to GPIO banks Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - - --- 2024-02-14 Théo Lebrun New
[21/23] MIPS: mobileye: eyeq5: add two GPIO bank nodes Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - - --- 2024-02-14 Théo Lebrun New
[20/23] MIPS: eyeq5_defconfig: enable GPIO by default Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - - --- 2024-02-14 Théo Lebrun New
[19/23] gpio: nomadik: grab optional reset control and deassert it at probe Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - - --- 2024-02-14 Théo Lebrun New
[18/23] gpio: nomadik: support mobileye,eyeq5-gpio Rework Nomadik GPIO to add Mobileye EyeQ5 support - - 1 - --- 2024-02-14 Théo Lebrun New
[17/23] gpio: nomadik: handle variadic GPIO count Rework Nomadik GPIO to add Mobileye EyeQ5 support - - 1 - --- 2024-02-14 Théo Lebrun New
[16/23] gpio: nomadik: support shared GPIO IRQs Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - - --- 2024-02-14 Théo Lebrun New
[15/23] gpio: nomadik: change driver name from gpio to gpio-nomadik Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - - --- 2024-02-14 Théo Lebrun New
[14/23] gpio: nomadik: make clock optional Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - - --- 2024-02-14 Théo Lebrun New
[13/23] gpio: nomadik: fix offset bug in nmk_pmx_set() Rework Nomadik GPIO to add Mobileye EyeQ5 support - 1 1 - --- 2024-02-14 Théo Lebrun New
[12/23] gpio: nomadik: request dynamic ID allocation Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - - --- 2024-02-14 Théo Lebrun New
[11/23] pinctrl: nomadik: follow conditional kernel coding conventions Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - - --- 2024-02-14 Théo Lebrun New
[10/23] pinctrl: nomadik: follow whitespace kernel coding conventions Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - - --- 2024-02-14 Théo Lebrun New
[09/23] pinctrl: nomadik: follow type-system kernel coding conventions Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - - --- 2024-02-14 Théo Lebrun New
[08/23] pinctrl: nomadik: minimise indentation in probe Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - - --- 2024-02-14 Théo Lebrun New
[07/23] pinctrl: nomadik: fix build warning (-Wpointer-to-int-cast) Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - - --- 2024-02-14 Théo Lebrun New
[06/23] pinctrl: nomadik: fix build warning (-Wformat) Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - - --- 2024-02-14 Théo Lebrun New
[05/23] gpio: nomadik: extract GPIO platform driver from drivers/pinctrl/nomadik/ Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - - --- 2024-02-14 Théo Lebrun New
[04/23] dt-bindings: gpio: nomadik: add optional reset property Rework Nomadik GPIO to add Mobileye EyeQ5 support 1 - 1 - --- 2024-02-14 Théo Lebrun New
[03/23] dt-bindings: gpio: nomadik: add mobileye,eyeq5-gpio compatible Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - - --- 2024-02-14 Théo Lebrun New
[02/23] dt-bindings: gpio: nomadik: add optional ngpios property Rework Nomadik GPIO to add Mobileye EyeQ5 support - - 2 - --- 2024-02-14 Théo Lebrun New
[01/23] dt-bindings: gpio: nomadik: convert into yaml format Rework Nomadik GPIO to add Mobileye EyeQ5 support - - 1 - --- 2024-02-14 Théo Lebrun New
gpio: sim: add lockdep asserts gpio: sim: add lockdep asserts - - - - --- 2024-02-14 Bartosz Golaszewski New
[v6,151/164] gpio: mvebu: Make use of devm_pwmchip_alloc() function pwm: Improve lifetime tracking for pwm_chips 1 - - - --- 2024-02-14 Uwe Kleine-König New
[v6,067/164] pwm: lpss-*: Make use of devm_pwmchip_alloc() function pwm: Improve lifetime tracking for pwm_chips - - 1 - --- 2024-02-14 Uwe Kleine-König New
[v6,003/164] pwm: Provide pwmchip_alloc() function and a devm variant of it pwm: Improve lifetime tracking for pwm_chips - - - - --- 2024-02-14 Uwe Kleine-König New
gpio: sysfs: fix inverted pointer logic gpio: sysfs: fix inverted pointer logic - 1 - - --- 2024-02-14 Bartosz Golaszewski New
[v2,4/4] gpio: don't let lockdep complain about inherently dangerous RCU usage gpio: fix SRCU bugs - 1 - - --- 2024-02-14 Bartosz Golaszewski New
[v2,3/4] gpio: use srcu_dereference() with SRCU-protected pointers gpio: fix SRCU bugs - 1 - - --- 2024-02-14 Bartosz Golaszewski New
[v2,2/4] gpio: cdev: use correct pointer accessors with SRCU gpio: fix SRCU bugs - 1 1 - --- 2024-02-14 Bartosz Golaszewski New
[v2,1/4] gpio: take the SRCU read lock in gpiod_hog() gpio: fix SRCU bugs - 1 1 - --- 2024-02-14 Bartosz Golaszewski New
Documentation: gpio: Add a note on the deprecated GPIO Testing Driver Documentation: gpio: Add a note on the deprecated GPIO Testing Driver - - - - --- 2024-02-13 Lincoln Wallace New
Documentation: gpio: consistent use of logical line value terminology Documentation: gpio: consistent use of logical line value terminology - - 2 - --- 2024-02-13 Kent Gibson New
[GIT,PULL] gpio: immutable branch with GPIO stubs for the reset subsystem [GIT,PULL] gpio: immutable branch with GPIO stubs for the reset subsystem - - - - --- 2024-02-13 Bartosz Golaszewski New
[3/3] gpio: use rcu_dereference_protected() to make lockdep happy gpio: fix SRCU bugs - 1 - - --- 2024-02-13 Bartosz Golaszewski New
[2/3] gpio: cdev: use correct pointer accessors with SRCU gpio: fix SRCU bugs - 1 1 - --- 2024-02-13 Bartosz Golaszewski New
[1/3] gpio: take the SRCU read lock in gpiod_hog() gpio: fix SRCU bugs - 1 1 - --- 2024-02-13 Bartosz Golaszewski New
gpio: initialize descriptor SRCU structure before adding OF-based chips gpio: initialize descriptor SRCU structure before adding OF-based chips - 2 - - --- 2024-02-12 Bartosz Golaszewski New
[2/2] pinctrl: qcom: sm8450: Add pll_clk to pin group 98 for SM8475 pinctrl: qcom: Add SM8475 support - - - - --- 2024-02-12 Danila Tikhonov New
[1/2] dt-bindings: pinctrl: qcom,sm8450-tlmm: Add compatible for SM8475 pinctrl: qcom: Add SM8475 support - - - - --- 2024-02-12 Danila Tikhonov New
[v6,13/13] MIPS: mobileye: eyeq5: add pinctrl node & pinmux function nodes Add support for Mobileye EyeQ5 system controller - - - - --- 2024-02-12 Théo Lebrun New
[v6,12/13] MIPS: mobileye: eyeq5: add OLB reset controller node Add support for Mobileye EyeQ5 system controller - - - - --- 2024-02-12 Théo Lebrun New
[v6,11/13] MIPS: mobileye: eyeq5: use OLB clocks controller node Add support for Mobileye EyeQ5 system controller - - - - --- 2024-02-12 Théo Lebrun New
[v6,10/13] MIPS: mobileye: eyeq5: add OLB syscon node Add support for Mobileye EyeQ5 system controller - - - - --- 2024-02-12 Théo Lebrun New
[v6,09/13] pinctrl: eyeq5: add platform driver Add support for Mobileye EyeQ5 system controller - - 1 - --- 2024-02-12 Théo Lebrun New
[v6,08/13] reset: eyeq5: add platform driver Add support for Mobileye EyeQ5 system controller - - - - --- 2024-02-12 Théo Lebrun New
« 1 2 ... 9 10 11 … 323 324 »