mbox series

[v5,0/4] pinctl: qcom: sm4450: Add SM4450 pinctrl driver

Message ID 20231130024046.25938-1-quic_tengfan@quicinc.com
Headers show
Series pinctl: qcom: sm4450: Add SM4450 pinctrl driver | expand

Message

Tengfei Fan Nov. 30, 2023, 2:40 a.m. UTC 
Add SM4450 pinctrl driver for support enable uart console.

Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
---
v4 -> v5:
  - Convert to platform remove callback returning void
  - correct incorrect address offset

v3 -> v4:
  - update gpio pins pattern

v2 -> v3:
  - update example pieces
  - update gpio pins pattern

v1 -> v2:
  - update right platform name
  - update gpio-reserved-ranges have right maxItems
  - update gpio-line-names have right maxItems
  - add min/maxItems for pins properties
  - redo dt_binding_check check
  - delete reserved gpios setting
  - combine separate pinctrl functions

previous discussion here:
[1] v4: https://lore.kernel.org/linux-arm-msm/20230920082102.5744-1-quic_tengfan@quicinc.com
[2] v3:	https://lore.kernel.org/linux-arm-msm/20230920064739.12562-1-quic_tengfan@quicinc.com
[3] v2:	https://lore.kernel.org/linux-arm-msm/20230915015808.18296-1-quic_tengfan@quicinc.com
[4] v1:	https://lore.kernel.org/linux-arm-msm/20230908063843.26835-1-quic_tengfan@quicinc.com

Tengfei Fan (4):
  dt-bindings: pinctrl: qcom: Add SM4450 pinctrl
  pinctrl: qcom: Add SM4450 pinctrl driver
  pinctrl: qcom: sm4450: Convert to platform remove callback returning
    void
  pinctrl: qcom: sm4450: correct incorrect address offset

 .../bindings/pinctrl/qcom,sm4450-tlmm.yaml    |  151 +++
 drivers/pinctrl/qcom/Kconfig.msm              |    8 +
 drivers/pinctrl/qcom/Makefile                 |    1 +
 drivers/pinctrl/qcom/pinctrl-sm4450.c         | 1013 +++++++++++++++++
 4 files changed, 1173 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
 create mode 100644 drivers/pinctrl/qcom/pinctrl-sm4450.c


base-commit: 1f5c003694fab4b1ba6cbdcc417488b975c088d0