| Message ID | 20230109174511.1740856-1-brgl@bgdev.pl |
|---|---|
| Headers | show |
| Series | arm64: qcom: add support for sa8775p-ride | expand |
On 09/01/2023 19:44, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > This adds basic support for the Qualcomm sa8775p platform and its reference > board: sa8775p-ride. The dtsi contains basic SoC description required for > a simple boot-to-shell. The dts enables boot-to-shell with UART on the > sa8775p-ride board. There are three new drivers required to boot the board: > pinctrl, interconnect and GCC clock. Other patches contain various tweaks > to existing code. More support is coming up. > > Bartosz Golaszewski (15): > dt-bindings: clock: sa8775p: add bindings for Qualcomm gcc-sa8775p > arm64: defconfig: enable the clock driver for Qualcomm SA8775P > platforms > dt-bindings: clock: qcom-rpmhcc: document the clock for sa8775p > clk: qcom: rpmh: add clocks for sa8775p > dt-bindings: interconnect: qcom: document the interconnects for > sa8775p > arm64: defconfig: enable the interconnect driver for Qualcomm SA8775P > dt-bindings: pinctrl: sa8775p: add bindings for qcom,sa8775p-tlmm > arm64: defconfig: enable the pinctrl driver for Qualcomm SA8775P > platforms > dt-bindings: mailbox: qcom-ipcc: document the sa8775p platform > dt-bindings: power: qcom,rpmpd: document sa8775p > soc: qcom: rmphpd: add power domains for sa8775p > dt-bindings: arm-smmu: document the smmu on Qualcomm SA8775P > iommu: arm-smmu: qcom: add support for sa8775p > dt-bindings: arm: qcom: document the sa8775p reference board > arm64: dts: qcom: add initial support for qcom sa8775p-ride > > Shazad Hussain (2): > clk: qcom: add the GCC driver for sa8775p This patch didn't make it to the list. Please check if you can fix or split it somehow?
On 9.01.2023 21:13, Dmitry Baryshkov wrote: > On 09/01/2023 19:44, Bartosz Golaszewski wrote: >> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> >> >> This adds basic support for the Qualcomm sa8775p platform and its reference >> board: sa8775p-ride. The dtsi contains basic SoC description required for >> a simple boot-to-shell. The dts enables boot-to-shell with UART on the >> sa8775p-ride board. There are three new drivers required to boot the board: >> pinctrl, interconnect and GCC clock. Other patches contain various tweaks >> to existing code. More support is coming up. >> >> Bartosz Golaszewski (15): >> dt-bindings: clock: sa8775p: add bindings for Qualcomm gcc-sa8775p >> arm64: defconfig: enable the clock driver for Qualcomm SA8775P >> platforms >> dt-bindings: clock: qcom-rpmhcc: document the clock for sa8775p >> clk: qcom: rpmh: add clocks for sa8775p >> dt-bindings: interconnect: qcom: document the interconnects for >> sa8775p >> arm64: defconfig: enable the interconnect driver for Qualcomm SA8775P >> dt-bindings: pinctrl: sa8775p: add bindings for qcom,sa8775p-tlmm >> arm64: defconfig: enable the pinctrl driver for Qualcomm SA8775P >> platforms >> dt-bindings: mailbox: qcom-ipcc: document the sa8775p platform >> dt-bindings: power: qcom,rpmpd: document sa8775p >> soc: qcom: rmphpd: add power domains for sa8775p >> dt-bindings: arm-smmu: document the smmu on Qualcomm SA8775P >> iommu: arm-smmu: qcom: add support for sa8775p >> dt-bindings: arm: qcom: document the sa8775p reference board >> arm64: dts: qcom: add initial support for qcom sa8775p-ride >> >> Shazad Hussain (2): >> clk: qcom: add the GCC driver for sa8775p > > This patch didn't make it to the list. Please check if you can fix or split it somehow? It's a known issue with lists clipping messages that are too long. I'll forward it to you. Konrad >
On 09/01/2023 22:59, Konrad Dybcio wrote: > > > On 9.01.2023 21:13, Dmitry Baryshkov wrote: >> On 09/01/2023 19:44, Bartosz Golaszewski wrote: >>> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> >>> >>> This adds basic support for the Qualcomm sa8775p platform and its reference >>> board: sa8775p-ride. The dtsi contains basic SoC description required for >>> a simple boot-to-shell. The dts enables boot-to-shell with UART on the >>> sa8775p-ride board. There are three new drivers required to boot the board: >>> pinctrl, interconnect and GCC clock. Other patches contain various tweaks >>> to existing code. More support is coming up. >>> >>> Bartosz Golaszewski (15): >>> dt-bindings: clock: sa8775p: add bindings for Qualcomm gcc-sa8775p >>> arm64: defconfig: enable the clock driver for Qualcomm SA8775P >>> platforms >>> dt-bindings: clock: qcom-rpmhcc: document the clock for sa8775p >>> clk: qcom: rpmh: add clocks for sa8775p >>> dt-bindings: interconnect: qcom: document the interconnects for >>> sa8775p >>> arm64: defconfig: enable the interconnect driver for Qualcomm SA8775P >>> dt-bindings: pinctrl: sa8775p: add bindings for qcom,sa8775p-tlmm >>> arm64: defconfig: enable the pinctrl driver for Qualcomm SA8775P >>> platforms >>> dt-bindings: mailbox: qcom-ipcc: document the sa8775p platform >>> dt-bindings: power: qcom,rpmpd: document sa8775p >>> soc: qcom: rmphpd: add power domains for sa8775p >>> dt-bindings: arm-smmu: document the smmu on Qualcomm SA8775P >>> iommu: arm-smmu: qcom: add support for sa8775p >>> dt-bindings: arm: qcom: document the sa8775p reference board >>> arm64: dts: qcom: add initial support for qcom sa8775p-ride >>> >>> Shazad Hussain (2): >>> clk: qcom: add the GCC driver for sa8775p >> >> This patch didn't make it to the list. Please check if you can fix or split it somehow? > It's a known issue with lists clipping messages that are too long. > I'll forward it to you. Thank you!
On Mon, 9 Jan 2023 18:44:53 +0100, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > This adds basic support for the Qualcomm sa8775p platform and its reference > board: sa8775p-ride. The dtsi contains basic SoC description required for > a simple boot-to-shell. The dts enables boot-to-shell with UART on the > sa8775p-ride board. There are three new drivers required to boot the board: > pinctrl, interconnect and GCC clock. Other patches contain various tweaks > to existing code. More support is coming up. > > [...] Applied, thanks! [13/18] dt-bindings: power: qcom,rpmpd: document sa8775p commit: b4f0370d3ce276397f5c48af99d0b77548825eb1 [14/18] soc: qcom: rmphpd: add power domains for sa8775p commit: 91e910adc59a6954e475dd2d6a4534ac56dd8eed Best regards,
On Mon, 9 Jan 2023 18:44:53 +0100, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > This adds basic support for the Qualcomm sa8775p platform and its reference > board: sa8775p-ride. The dtsi contains basic SoC description required for > a simple boot-to-shell. The dts enables boot-to-shell with UART on the > sa8775p-ride board. There are three new drivers required to boot the board: > pinctrl, interconnect and GCC clock. Other patches contain various tweaks > to existing code. More support is coming up. > > [...] Applied, thanks! [03/18] arm64: defconfig: enable the clock driver for Qualcomm SA8775P platforms commit: 1a87f7e5fa10b23633da03aed6b7c7e716457304 Best regards,
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> This adds basic support for the Qualcomm sa8775p platform and its reference board: sa8775p-ride. The dtsi contains basic SoC description required for a simple boot-to-shell. The dts enables boot-to-shell with UART on the sa8775p-ride board. There are three new drivers required to boot the board: pinctrl, interconnect and GCC clock. Other patches contain various tweaks to existing code. More support is coming up. Bartosz Golaszewski (15): dt-bindings: clock: sa8775p: add bindings for Qualcomm gcc-sa8775p arm64: defconfig: enable the clock driver for Qualcomm SA8775P platforms dt-bindings: clock: qcom-rpmhcc: document the clock for sa8775p clk: qcom: rpmh: add clocks for sa8775p dt-bindings: interconnect: qcom: document the interconnects for sa8775p arm64: defconfig: enable the interconnect driver for Qualcomm SA8775P dt-bindings: pinctrl: sa8775p: add bindings for qcom,sa8775p-tlmm arm64: defconfig: enable the pinctrl driver for Qualcomm SA8775P platforms dt-bindings: mailbox: qcom-ipcc: document the sa8775p platform dt-bindings: power: qcom,rpmpd: document sa8775p soc: qcom: rmphpd: add power domains for sa8775p dt-bindings: arm-smmu: document the smmu on Qualcomm SA8775P iommu: arm-smmu: qcom: add support for sa8775p dt-bindings: arm: qcom: document the sa8775p reference board arm64: dts: qcom: add initial support for qcom sa8775p-ride Shazad Hussain (2): clk: qcom: add the GCC driver for sa8775p interconnect: qcom: add a driver for sa8775p Yadu MG (1): pinctrl: qcom: sa8775p: add the pinctrl driver for the sa8775p platform .../devicetree/bindings/arm/qcom.yaml | 5 + .../bindings/clock/qcom,gcc-sa8775p.yaml | 77 + .../bindings/clock/qcom,rpmhcc.yaml | 1 + .../bindings/interconnect/qcom,rpmh.yaml | 14 + .../devicetree/bindings/iommu/arm,smmu.yaml | 1 + .../bindings/mailbox/qcom-ipcc.yaml | 1 + .../bindings/pinctrl/qcom,sa8775p-tlmm.yaml | 142 + .../devicetree/bindings/power/qcom,rpmpd.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 39 + arch/arm64/boot/dts/qcom/sa8775p.dtsi | 841 +++ arch/arm64/configs/defconfig | 3 + drivers/clk/qcom/Kconfig | 9 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/clk-rpmh.c | 17 + drivers/clk/qcom/gcc-sa8775p.c | 4806 +++++++++++++++++ drivers/interconnect/qcom/Kconfig | 9 + drivers/interconnect/qcom/Makefile | 2 + drivers/interconnect/qcom/sa8775p.c | 2542 +++++++++ drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 1 + drivers/pinctrl/qcom/Kconfig | 9 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sa8775p.c | 1649 ++++++ drivers/soc/qcom/rpmhpd.c | 34 + include/dt-bindings/clock/qcom,gcc-sa8775p.h | 320 ++ .../dt-bindings/interconnect/qcom,sa8775p.h | 231 + include/dt-bindings/power/qcom-rpmpd.h | 19 + 27 files changed, 10776 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sa8775p.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-ride.dts create mode 100644 arch/arm64/boot/dts/qcom/sa8775p.dtsi create mode 100644 drivers/clk/qcom/gcc-sa8775p.c create mode 100644 drivers/interconnect/qcom/sa8775p.c create mode 100644 drivers/pinctrl/qcom/pinctrl-sa8775p.c create mode 100644 include/dt-bindings/clock/qcom,gcc-sa8775p.h create mode 100644 include/dt-bindings/interconnect/qcom,sa8775p.h