| Message ID | 20230316112832.2711783-4-libaokun1@huawei.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ext4: fix WARNING in ext4_add_complete_io | expand |
On Thu 16-03-23 19:28:32, Baokun Li wrote: > We got a WARNING in ext4_add_complete_io: > ================================================================== > WARNING: at fs/ext4/page-io.c:231 ext4_put_io_end_defer+0x182/0x250 > CPU: 10 PID: 77 Comm: ksoftirqd/10 Tainted: 6.3.0-rc2 #85 > RIP: 0010:ext4_put_io_end_defer+0x182/0x250 [ext4] > [...] > Call Trace: > <TASK> > ext4_end_bio+0xa8/0x240 [ext4] > bio_endio+0x195/0x310 > blk_update_request+0x184/0x770 > scsi_end_request+0x2f/0x240 > scsi_io_completion+0x75/0x450 > scsi_finish_command+0xef/0x160 > scsi_complete+0xa3/0x180 > blk_complete_reqs+0x60/0x80 > blk_done_softirq+0x25/0x40 > __do_softirq+0x119/0x4c8 > run_ksoftirqd+0x42/0x70 > smpboot_thread_fn+0x136/0x3c0 > kthread+0x140/0x1a0 > ret_from_fork+0x2c/0x50 > ================================================================== > > Above issue may happen as follows: > cpu1 cpu2 > ______________________________|_____________________________ > mount -o dioread_lock > ext4_writepages > ext4_do_writepages > *if (ext4_should_dioread_nolock(inode))* > // rsv_blocks is not assigned here > mount -o remount,dioread_nolock > ext4_journal_start_with_reserve > __ext4_journal_start > __ext4_journal_start_sb > jbd2__journal_start > *if (rsv_blocks)* > // h_rsv_handle is not initialized here > mpage_map_and_submit_extent > mpage_map_one_extent > dioread_nolock = ext4_should_dioread_nolock(inode) > if (dioread_nolock && (map->m_flags & EXT4_MAP_UNWRITTEN)) > mpd->io_submit.io_end->handle = handle->h_rsv_handle > ext4_set_io_unwritten_flag > io_end->flag |= EXT4_IO_END_UNWRITTEN > // now io_end->handle is NULL but has EXT4_IO_END_UNWRITTEN flag > > scsi_finish_command > scsi_io_completion > scsi_io_completion_action > scsi_end_request > blk_update_request > req_bio_endio > bio_endio > bio->bi_end_io > ext4_end_bio > ext4_put_io_end_defer > ext4_add_complete_io > // trigger WARN_ON(!io_end->handle && sbi->s_journal); > > The immediate cause of this problem is that ext4_should_dioread_nolock() > function returns inconsistent values in the ext4_do_writepages() and > mpage_map_one_extent(). There are four conditions in this function that > can be changed at mount time to cause this problem. These four conditions > can be divided into two categories: > (1) journal_data and EXT4_EXTENTS_FL, which can be changed by ioctl > (2) DELALLOC and DIOREAD_NOLOCK, which can be changed by remount > The two in the first category have been fixed by commit c8585c6fcaf2 > ("ext4: fix races between changing inode journal mode and ext4_writepages") > and commit cb85f4d23f79 ("ext4: fix race between writepages and enabling > EXT4_EXTENTS_FL") respectively. > Two cases in the other category have not yet been fixed, and the above > issue is caused by this situation. We refer to the fix for the first > category, When DELALLOC or DIOREAD_NOLOCK is detected to be changed > during remount, we hold the s_writepages_rwsem lock to avoid racing with > ext4_writepages to trigger the problem. > Moreover, we add an EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK macro to ensure that > the mount options used by ext4_should_dioread_nolock() and __ext4_remount() > are always consistent. > > Fixes: 6b523df4fb5a ("ext4: use transaction reservation for extent conversion in ext4_end_io") > Cc: stable@vger.kernel.org > Signed-off-by: Baokun Li <libaokun1@huawei.com> Nice catch! One comment below: > --- > fs/ext4/ext4.h | 3 ++- > fs/ext4/ext4_jbd2.h | 9 +++++---- > fs/ext4/super.c | 14 ++++++++++++++ > 3 files changed, 21 insertions(+), 5 deletions(-) > > diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h > index 08b29c289da4..f60967fa648f 100644 > --- a/fs/ext4/ext4.h > +++ b/fs/ext4/ext4.h > @@ -1703,7 +1703,8 @@ struct ext4_sb_info { > > /* > * Barrier between writepages ops and changing any inode's JOURNAL_DATA > - * or EXTENTS flag. > + * or EXTENTS flag or between changing SHOULD_DIOREAD_NOLOCK flag on > + * remount and writepages ops. > */ > struct percpu_rw_semaphore s_writepages_rwsem; > struct dax_device *s_daxdev; > diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h > index 0c77697d5e90..d82bfcdd56e5 100644 > --- a/fs/ext4/ext4_jbd2.h > +++ b/fs/ext4/ext4_jbd2.h > @@ -488,6 +488,9 @@ static inline int ext4_free_data_revoke_credits(struct inode *inode, int blocks) > return blocks + 2*(EXT4_SB(inode->i_sb)->s_cluster_ratio - 1); > } > > +/* delalloc is a temporary fix to prevent generic/422 test failures*/ > +#define EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK (EXT4_MOUNT_DIOREAD_NOLOCK | \ > + EXT4_MOUNT_DELALLOC) > /* > * This function controls whether or not we should try to go down the > * dioread_nolock code paths, which makes it safe to avoid taking > @@ -499,7 +502,8 @@ static inline int ext4_free_data_revoke_credits(struct inode *inode, int blocks) > */ > static inline int ext4_should_dioread_nolock(struct inode *inode) > { > - if (!test_opt(inode->i_sb, DIOREAD_NOLOCK)) > + if (test_opt(inode->i_sb, SHOULD_DIOREAD_NOLOCK) != > + EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK) > return 0; > if (!S_ISREG(inode->i_mode)) > return 0; > @@ -507,9 +511,6 @@ static inline int ext4_should_dioread_nolock(struct inode *inode) > return 0; > if (ext4_should_journal_data(inode)) > return 0; > - /* temporary fix to prevent generic/422 test failures */ > - if (!test_opt(inode->i_sb, DELALLOC)) > - return 0; > return 1; > } Is there a need for this SHOULD_DIOREAD_NOLOCK? When called from writeback we will be protected by s_writepages_rwsem anyway. When called from other places, we either decide to do dioread_nolock or don't but the situation can change at any instant so I don't see how unifying this check would help. And the new SHOULD_DIOREAD_NOLOCK somewhat obfuscates what's going on. > diff --git a/fs/ext4/super.c b/fs/ext4/super.c > index fefcd42f34ea..bdf6b288aeff 100644 > --- a/fs/ext4/super.c > +++ b/fs/ext4/super.c > @@ -6403,8 +6403,22 @@ static int __ext4_remount(struct fs_context *fc, struct super_block *sb) > > } > > + /* Get the flag we really need to set/clear. */ > + ctx->mask_s_mount_opt &= sbi->s_mount_opt; > + ctx->vals_s_mount_opt &= ~sbi->s_mount_opt; > + > + /* > + * If EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK change on remount, we need > + * to hold s_writepages_rwsem to avoid racing with writepages ops. > + */ > + if (ctx_changed_mount_opt(ctx, EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK)) > + percpu_down_write(&sbi->s_writepages_rwsem); > + Honestly, I'd be inclined to grab s_writepages_rwsem unconditionally during remount. Remount is not a fast path operation and waiting for writepages isn't too bad. Also it's easier for testing :). Honza
On 2023/3/23 19:44, Jan Kara wrote: > On Thu 16-03-23 19:28:32, Baokun Li wrote: >> Above issue may happen as follows: >> cpu1 cpu2 >> ______________________________|_____________________________ >> mount -o dioread_lock >> ext4_writepages >> ext4_do_writepages >> *if (ext4_should_dioread_nolock(inode))* >> // rsv_blocks is not assigned here >> mount -o remount,dioread_nolock >> ext4_journal_start_with_reserve >> __ext4_journal_start >> __ext4_journal_start_sb >> jbd2__journal_start >> *if (rsv_blocks)* >> // h_rsv_handle is not initialized here >> mpage_map_and_submit_extent >> mpage_map_one_extent >> dioread_nolock = ext4_should_dioread_nolock(inode) >> if (dioread_nolock && (map->m_flags & EXT4_MAP_UNWRITTEN)) >> mpd->io_submit.io_end->handle = handle->h_rsv_handle >> ext4_set_io_unwritten_flag >> io_end->flag |= EXT4_IO_END_UNWRITTEN >> // now io_end->handle is NULL but has EXT4_IO_END_UNWRITTEN flag >> >> scsi_finish_command >> scsi_io_completion >> scsi_io_completion_action >> scsi_end_request >> blk_update_request >> req_bio_endio >> bio_endio >> bio->bi_end_io > ext4_end_bio >> ext4_put_io_end_defer >> ext4_add_complete_io >> // trigger WARN_ON(!io_end->handle && sbi->s_journal); >> >> The immediate cause of this problem is that ext4_should_dioread_nolock() >> function returns inconsistent values in the ext4_do_writepages() and >> mpage_map_one_extent(). There are four conditions in this function that >> can be changed at mount time to cause this problem. These four conditions >> can be divided into two categories: >> (1) journal_data and EXT4_EXTENTS_FL, which can be changed by ioctl >> (2) DELALLOC and DIOREAD_NOLOCK, which can be changed by remount >> The two in the first category have been fixed by commit c8585c6fcaf2 >> ("ext4: fix races between changing inode journal mode and ext4_writepages") >> and commit cb85f4d23f79 ("ext4: fix race between writepages and enabling >> EXT4_EXTENTS_FL") respectively. >> Two cases in the other category have not yet been fixed, and the above >> issue is caused by this situation. We refer to the fix for the first >> category, When DELALLOC or DIOREAD_NOLOCK is detected to be changed >> during remount, we hold the s_writepages_rwsem lock to avoid racing with >> ext4_writepages to trigger the problem. >> Moreover, we add an EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK macro to ensure that >> the mount options used by ext4_should_dioread_nolock() and __ext4_remount() >> are always consistent. >> >> Fixes: 6b523df4fb5a ("ext4: use transaction reservation for extent conversion in ext4_end_io") >> Cc: stable@vger.kernel.org >> Signed-off-by: Baokun Li <libaokun1@huawei.com> > Nice catch! One comment below: Thank you very much for your review! >> --- >> fs/ext4/ext4.h | 3 ++- >> fs/ext4/ext4_jbd2.h | 9 +++++---- >> fs/ext4/super.c | 14 ++++++++++++++ >> 3 files changed, 21 insertions(+), 5 deletions(-) >> >> diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h >> index 08b29c289da4..f60967fa648f 100644 >> --- a/fs/ext4/ext4.h >> +++ b/fs/ext4/ext4.h >> @@ -1703,7 +1703,8 @@ struct ext4_sb_info { >> >> /* >> * Barrier between writepages ops and changing any inode's JOURNAL_DATA >> - * or EXTENTS flag. >> + * or EXTENTS flag or between changing SHOULD_DIOREAD_NOLOCK flag on >> + * remount and writepages ops. >> */ >> struct percpu_rw_semaphore s_writepages_rwsem; >> struct dax_device *s_daxdev; >> diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h >> index 0c77697d5e90..d82bfcdd56e5 100644 >> --- a/fs/ext4/ext4_jbd2.h >> +++ b/fs/ext4/ext4_jbd2.h >> @@ -488,6 +488,9 @@ static inline int ext4_free_data_revoke_credits(struct inode *inode, int blocks) >> return blocks + 2*(EXT4_SB(inode->i_sb)->s_cluster_ratio - 1); >> } >> >> +/* delalloc is a temporary fix to prevent generic/422 test failures*/ >> +#define EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK (EXT4_MOUNT_DIOREAD_NOLOCK | \ >> + EXT4_MOUNT_DELALLOC) >> /* >> * This function controls whether or not we should try to go down the >> * dioread_nolock code paths, which makes it safe to avoid taking >> @@ -499,7 +502,8 @@ static inline int ext4_free_data_revoke_credits(struct inode *inode, int blocks) >> */ >> static inline int ext4_should_dioread_nolock(struct inode *inode) >> { >> - if (!test_opt(inode->i_sb, DIOREAD_NOLOCK)) >> + if (test_opt(inode->i_sb, SHOULD_DIOREAD_NOLOCK) != >> + EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK) >> return 0; >> if (!S_ISREG(inode->i_mode)) >> return 0; >> @@ -507,9 +511,6 @@ static inline int ext4_should_dioread_nolock(struct inode *inode) >> return 0; >> if (ext4_should_journal_data(inode)) >> return 0; >> - /* temporary fix to prevent generic/422 test failures */ >> - if (!test_opt(inode->i_sb, DELALLOC)) >> - return 0; >> return 1; >> } > Is there a need for this SHOULD_DIOREAD_NOLOCK? When called from writeback > we will be protected by s_writepages_rwsem anyway. When called from other > places, we either decide to do dioread_nolock or don't but the situation > can change at any instant so I don't see how unifying this check would > help. And the new SHOULD_DIOREAD_NOLOCK somewhat obfuscates what's going > on. We're thinking that the mount-related flags in ext4_should_dioread_nolock() might be modified, such as DELALLOC being removed because generic/422 test failures were fixed in some other way, resulting in some unnecessary locking during remount, or for whatever reason a mount-related flag was added to ext4_should_dioread_nolock(), and we didn't make a synchronization change in __ext4_remount() that would cause the problem to recur. So we added this flag to this function (instead of in ext4.h), so that when we change the mount option in ext4_should_dioread_nolock(), we directly change this flag, and we don't have to consider making synchronization changes in __ext4_remount(). We have checked where this function is called and there are two types of calls to this function: 1. One category is ext4_do_writepages() and mpage_map_one_extent(), which are protected by s_writepages_rwsem, the location of the problem; 2. The other type is in ext4_page_mkwrite(), ext4_convert_inline_data_to_extent(),ext4_write_begin() to determine whether to get the block using ext4_get_block_unwritten() or ext4_get_ block(). 1) If we just started fetching written blocks, it looks like there is no problem; 2) If we start getting unwritten blocks, when DIOREAD_NOLOCK is cleared by remount, we will convert the blocks to written in ext4_map_blocks(). The data=ordered mode ensures that we don't see stale data. > >> diff --git a/fs/ext4/super.c b/fs/ext4/super.c >> index fefcd42f34ea..bdf6b288aeff 100644 >> --- a/fs/ext4/super.c >> +++ b/fs/ext4/super.c >> @@ -6403,8 +6403,22 @@ static int __ext4_remount(struct fs_context *fc, struct super_block *sb) >> >> } >> >> + /* Get the flag we really need to set/clear. */ >> + ctx->mask_s_mount_opt &= sbi->s_mount_opt; >> + ctx->vals_s_mount_opt &= ~sbi->s_mount_opt; >> + >> + /* >> + * If EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK change on remount, we need >> + * to hold s_writepages_rwsem to avoid racing with writepages ops. >> + */ >> + if (ctx_changed_mount_opt(ctx, EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK)) >> + percpu_down_write(&sbi->s_writepages_rwsem); >> + > Honestly, I'd be inclined to grab s_writepages_rwsem unconditionally during > remount. Remount is not a fast path operation and waiting for writepages > isn't too bad. Also it's easier for testing :). > > Honza Initially I was concerned that adding this lock to remount would cause users to wait too long when remounting, so I added the lock only when the **actual** mount flags being modified **contained** DIOREAD_NOLOCK or DELALLOC. But now that I think about it, if there is no better way to do it, it seems to be acceptable to add the lock unconditionally, so that the code looks cleaner. Thanks again! Any comments are welcome!
On Thu 23-03-23 22:18:53, Baokun Li wrote: > On 2023/3/23 19:44, Jan Kara wrote: > > > --- > > > fs/ext4/ext4.h | 3 ++- > > > fs/ext4/ext4_jbd2.h | 9 +++++---- > > > fs/ext4/super.c | 14 ++++++++++++++ > > > 3 files changed, 21 insertions(+), 5 deletions(-) > > > > > > diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h > > > index 08b29c289da4..f60967fa648f 100644 > > > --- a/fs/ext4/ext4.h > > > +++ b/fs/ext4/ext4.h > > > @@ -1703,7 +1703,8 @@ struct ext4_sb_info { > > > /* > > > * Barrier between writepages ops and changing any inode's JOURNAL_DATA > > > - * or EXTENTS flag. > > > + * or EXTENTS flag or between changing SHOULD_DIOREAD_NOLOCK flag on > > > + * remount and writepages ops. > > > */ > > > struct percpu_rw_semaphore s_writepages_rwsem; > > > struct dax_device *s_daxdev; > > > diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h > > > index 0c77697d5e90..d82bfcdd56e5 100644 > > > --- a/fs/ext4/ext4_jbd2.h > > > +++ b/fs/ext4/ext4_jbd2.h > > > @@ -488,6 +488,9 @@ static inline int ext4_free_data_revoke_credits(struct inode *inode, int blocks) > > > return blocks + 2*(EXT4_SB(inode->i_sb)->s_cluster_ratio - 1); > > > } > > > +/* delalloc is a temporary fix to prevent generic/422 test failures*/ > > > +#define EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK (EXT4_MOUNT_DIOREAD_NOLOCK | \ > > > + EXT4_MOUNT_DELALLOC) > > > /* > > > * This function controls whether or not we should try to go down the > > > * dioread_nolock code paths, which makes it safe to avoid taking > > > @@ -499,7 +502,8 @@ static inline int ext4_free_data_revoke_credits(struct inode *inode, int blocks) > > > */ > > > static inline int ext4_should_dioread_nolock(struct inode *inode) > > > { > > > - if (!test_opt(inode->i_sb, DIOREAD_NOLOCK)) > > > + if (test_opt(inode->i_sb, SHOULD_DIOREAD_NOLOCK) != > > > + EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK) > > > return 0; > > > if (!S_ISREG(inode->i_mode)) > > > return 0; > > > @@ -507,9 +511,6 @@ static inline int ext4_should_dioread_nolock(struct inode *inode) > > > return 0; > > > if (ext4_should_journal_data(inode)) > > > return 0; > > > - /* temporary fix to prevent generic/422 test failures */ > > > - if (!test_opt(inode->i_sb, DELALLOC)) > > > - return 0; > > > return 1; > > > } > > Is there a need for this SHOULD_DIOREAD_NOLOCK? When called from writeback > > we will be protected by s_writepages_rwsem anyway. When called from other > > places, we either decide to do dioread_nolock or don't but the situation > > can change at any instant so I don't see how unifying this check would > > help. And the new SHOULD_DIOREAD_NOLOCK somewhat obfuscates what's going > > on. > We're thinking that the mount-related flags in > ext4_should_dioread_nolock() might be modified, such as DELALLOC being > removed because generic/422 test failures were fixed in some other way, > resulting in some unnecessary locking during remount, or for whatever > reason a mount-related flag was added to ext4_should_dioread_nolock(), > and we didn't make a synchronization change in __ext4_remount() that > would cause the problem to recur. So we added this flag to this function > (instead of in ext4.h), so that when we change the mount option in > ext4_should_dioread_nolock(), we directly change this flag, and we don't > have to consider making synchronization changes in __ext4_remount(). > > We have checked where this function is called and there are two types of > calls to this function: > 1. One category is ext4_do_writepages() and mpage_map_one_extent(), which > are protected by s_writepages_rwsem, the location of the problem; > 2. The other type is in ext4_page_mkwrite(), > ext4_convert_inline_data_to_extent(), ext4_write_begin() to determine > whether to get the block using ext4_get_block_unwritten() or > ext4_get_block(). > > 1) If we just started fetching written blocks, it looks like there is no > problem; > 2) If we start getting unwritten blocks, when DIOREAD_NOLOCK is cleared > by remount, > we will convert the blocks to written in ext4_map_blocks(). The > data=ordered mode ensures that we don't see stale data. Yes. So do you agree that EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK is not really needed? Honza
On 2023/3/27 17:35, Jan Kara wrote: > On Thu 23-03-23 22:18:53, Baokun Li wrote: >> On 2023/3/23 19:44, Jan Kara wrote: >>>> --- >>>> fs/ext4/ext4.h | 3 ++- >>>> fs/ext4/ext4_jbd2.h | 9 +++++---- >>>> fs/ext4/super.c | 14 ++++++++++++++ >>>> 3 files changed, 21 insertions(+), 5 deletions(-) >>>> >>>> diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h >>>> index 08b29c289da4..f60967fa648f 100644 >>>> --- a/fs/ext4/ext4.h >>>> +++ b/fs/ext4/ext4.h >>>> @@ -1703,7 +1703,8 @@ struct ext4_sb_info { >>>> /* >>>> * Barrier between writepages ops and changing any inode's JOURNAL_DATA >>>> - * or EXTENTS flag. >>>> + * or EXTENTS flag or between changing SHOULD_DIOREAD_NOLOCK flag on >>>> + * remount and writepages ops. >>>> */ >>>> struct percpu_rw_semaphore s_writepages_rwsem; >>>> struct dax_device *s_daxdev; >>>> diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h >>>> index 0c77697d5e90..d82bfcdd56e5 100644 >>>> --- a/fs/ext4/ext4_jbd2.h >>>> +++ b/fs/ext4/ext4_jbd2.h >>>> @@ -488,6 +488,9 @@ static inline int ext4_free_data_revoke_credits(struct inode *inode, int blocks) >>>> return blocks + 2*(EXT4_SB(inode->i_sb)->s_cluster_ratio - 1); >>>> } >>>> +/* delalloc is a temporary fix to prevent generic/422 test failures*/ >>>> +#define EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK (EXT4_MOUNT_DIOREAD_NOLOCK | \ >>>> + EXT4_MOUNT_DELALLOC) >>>> /* >>>> * This function controls whether or not we should try to go down the >>>> * dioread_nolock code paths, which makes it safe to avoid taking >>>> @@ -499,7 +502,8 @@ static inline int ext4_free_data_revoke_credits(struct inode *inode, int blocks) >>>> */ >>>> static inline int ext4_should_dioread_nolock(struct inode *inode) >>>> { >>>> - if (!test_opt(inode->i_sb, DIOREAD_NOLOCK)) >>>> + if (test_opt(inode->i_sb, SHOULD_DIOREAD_NOLOCK) != >>>> + EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK) >>>> return 0; >>>> if (!S_ISREG(inode->i_mode)) >>>> return 0; >>>> @@ -507,9 +511,6 @@ static inline int ext4_should_dioread_nolock(struct inode *inode) >>>> return 0; >>>> if (ext4_should_journal_data(inode)) >>>> return 0; >>>> - /* temporary fix to prevent generic/422 test failures */ >>>> - if (!test_opt(inode->i_sb, DELALLOC)) >>>> - return 0; >>>> return 1; >>>> } >>> Is there a need for this SHOULD_DIOREAD_NOLOCK? When called from writeback >>> we will be protected by s_writepages_rwsem anyway. When called from other >>> places, we either decide to do dioread_nolock or don't but the situation >>> can change at any instant so I don't see how unifying this check would >>> help. And the new SHOULD_DIOREAD_NOLOCK somewhat obfuscates what's going >>> on. >> We're thinking that the mount-related flags in >> ext4_should_dioread_nolock() might be modified, such as DELALLOC being >> removed because generic/422 test failures were fixed in some other way, >> resulting in some unnecessary locking during remount, or for whatever >> reason a mount-related flag was added to ext4_should_dioread_nolock(), >> and we didn't make a synchronization change in __ext4_remount() that >> would cause the problem to recur. So we added this flag to this function >> (instead of in ext4.h), so that when we change the mount option in >> ext4_should_dioread_nolock(), we directly change this flag, and we don't >> have to consider making synchronization changes in __ext4_remount(). >> >> We have checked where this function is called and there are two types of >> calls to this function: >> 1. One category is ext4_do_writepages() and mpage_map_one_extent(), which >> are protected by s_writepages_rwsem, the location of the problem; >> 2. The other type is in ext4_page_mkwrite(), >> ext4_convert_inline_data_to_extent(), ext4_write_begin() to determine >> whether to get the block using ext4_get_block_unwritten() or >> ext4_get_block(). >> >> 1) If we just started fetching written blocks, it looks like there is no >> problem; >> 2) If we start getting unwritten blocks, when DIOREAD_NOLOCK is cleared >> by remount, >> we will convert the blocks to written in ext4_map_blocks(). The >> data=ordered mode ensures that we don't see stale data. > Yes. So do you agree that EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK is not really > needed? > > Honza Yes, I totally agree! If we unconditionally grabbed s_writepages_rwsem when remounting, there would be no mount option synchronization problem, and the flag would be completely unnecessary. I will send a patch V2 with the changes suggested by you.
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 08b29c289da4..f60967fa648f 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1703,7 +1703,8 @@ struct ext4_sb_info { /* * Barrier between writepages ops and changing any inode's JOURNAL_DATA - * or EXTENTS flag. + * or EXTENTS flag or between changing SHOULD_DIOREAD_NOLOCK flag on + * remount and writepages ops. */ struct percpu_rw_semaphore s_writepages_rwsem; struct dax_device *s_daxdev; diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h index 0c77697d5e90..d82bfcdd56e5 100644 --- a/fs/ext4/ext4_jbd2.h +++ b/fs/ext4/ext4_jbd2.h @@ -488,6 +488,9 @@ static inline int ext4_free_data_revoke_credits(struct inode *inode, int blocks) return blocks + 2*(EXT4_SB(inode->i_sb)->s_cluster_ratio - 1); } +/* delalloc is a temporary fix to prevent generic/422 test failures*/ +#define EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK (EXT4_MOUNT_DIOREAD_NOLOCK | \ + EXT4_MOUNT_DELALLOC) /* * This function controls whether or not we should try to go down the * dioread_nolock code paths, which makes it safe to avoid taking @@ -499,7 +502,8 @@ static inline int ext4_free_data_revoke_credits(struct inode *inode, int blocks) */ static inline int ext4_should_dioread_nolock(struct inode *inode) { - if (!test_opt(inode->i_sb, DIOREAD_NOLOCK)) + if (test_opt(inode->i_sb, SHOULD_DIOREAD_NOLOCK) != + EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK) return 0; if (!S_ISREG(inode->i_mode)) return 0; @@ -507,9 +511,6 @@ static inline int ext4_should_dioread_nolock(struct inode *inode) return 0; if (ext4_should_journal_data(inode)) return 0; - /* temporary fix to prevent generic/422 test failures */ - if (!test_opt(inode->i_sb, DELALLOC)) - return 0; return 1; } diff --git a/fs/ext4/super.c b/fs/ext4/super.c index fefcd42f34ea..bdf6b288aeff 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -6403,8 +6403,22 @@ static int __ext4_remount(struct fs_context *fc, struct super_block *sb) } + /* Get the flag we really need to set/clear. */ + ctx->mask_s_mount_opt &= sbi->s_mount_opt; + ctx->vals_s_mount_opt &= ~sbi->s_mount_opt; + + /* + * If EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK change on remount, we need + * to hold s_writepages_rwsem to avoid racing with writepages ops. + */ + if (ctx_changed_mount_opt(ctx, EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK)) + percpu_down_write(&sbi->s_writepages_rwsem); + ext4_apply_options(fc, sb); + if (ctx_changed_mount_opt(ctx, EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK)) + percpu_up_write(&sbi->s_writepages_rwsem); + if ((old_opts.s_mount_opt & EXT4_MOUNT_JOURNAL_CHECKSUM) ^ test_opt(sb, JOURNAL_CHECKSUM)) { ext4_msg(sb, KERN_ERR, "changing journal_checksum "
We got a WARNING in ext4_add_complete_io: ================================================================== WARNING: at fs/ext4/page-io.c:231 ext4_put_io_end_defer+0x182/0x250 CPU: 10 PID: 77 Comm: ksoftirqd/10 Tainted: 6.3.0-rc2 #85 RIP: 0010:ext4_put_io_end_defer+0x182/0x250 [ext4] [...] Call Trace: <TASK> ext4_end_bio+0xa8/0x240 [ext4] bio_endio+0x195/0x310 blk_update_request+0x184/0x770 scsi_end_request+0x2f/0x240 scsi_io_completion+0x75/0x450 scsi_finish_command+0xef/0x160 scsi_complete+0xa3/0x180 blk_complete_reqs+0x60/0x80 blk_done_softirq+0x25/0x40 __do_softirq+0x119/0x4c8 run_ksoftirqd+0x42/0x70 smpboot_thread_fn+0x136/0x3c0 kthread+0x140/0x1a0 ret_from_fork+0x2c/0x50 ================================================================== Above issue may happen as follows: cpu1 cpu2 ______________________________|_____________________________ mount -o dioread_lock ext4_writepages ext4_do_writepages *if (ext4_should_dioread_nolock(inode))* // rsv_blocks is not assigned here mount -o remount,dioread_nolock ext4_journal_start_with_reserve __ext4_journal_start __ext4_journal_start_sb jbd2__journal_start *if (rsv_blocks)* // h_rsv_handle is not initialized here mpage_map_and_submit_extent mpage_map_one_extent dioread_nolock = ext4_should_dioread_nolock(inode) if (dioread_nolock && (map->m_flags & EXT4_MAP_UNWRITTEN)) mpd->io_submit.io_end->handle = handle->h_rsv_handle ext4_set_io_unwritten_flag io_end->flag |= EXT4_IO_END_UNWRITTEN // now io_end->handle is NULL but has EXT4_IO_END_UNWRITTEN flag scsi_finish_command scsi_io_completion scsi_io_completion_action scsi_end_request blk_update_request req_bio_endio bio_endio bio->bi_end_io > ext4_end_bio ext4_put_io_end_defer ext4_add_complete_io // trigger WARN_ON(!io_end->handle && sbi->s_journal); The immediate cause of this problem is that ext4_should_dioread_nolock() function returns inconsistent values in the ext4_do_writepages() and mpage_map_one_extent(). There are four conditions in this function that can be changed at mount time to cause this problem. These four conditions can be divided into two categories: (1) journal_data and EXT4_EXTENTS_FL, which can be changed by ioctl (2) DELALLOC and DIOREAD_NOLOCK, which can be changed by remount The two in the first category have been fixed by commit c8585c6fcaf2 ("ext4: fix races between changing inode journal mode and ext4_writepages") and commit cb85f4d23f79 ("ext4: fix race between writepages and enabling EXT4_EXTENTS_FL") respectively. Two cases in the other category have not yet been fixed, and the above issue is caused by this situation. We refer to the fix for the first category, When DELALLOC or DIOREAD_NOLOCK is detected to be changed during remount, we hold the s_writepages_rwsem lock to avoid racing with ext4_writepages to trigger the problem. Moreover, we add an EXT4_MOUNT_SHOULD_DIOREAD_NOLOCK macro to ensure that the mount options used by ext4_should_dioread_nolock() and __ext4_remount() are always consistent. Fixes: 6b523df4fb5a ("ext4: use transaction reservation for extent conversion in ext4_end_io") Cc: stable@vger.kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> --- fs/ext4/ext4.h | 3 ++- fs/ext4/ext4_jbd2.h | 9 +++++---- fs/ext4/super.c | 14 ++++++++++++++ 3 files changed, 21 insertions(+), 5 deletions(-)