| Message ID | 20230912140532.3797736-3-yangchen.openbmc@gmail.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | Add CMC of Facebook Minerva platform | expand |
Hi Krzysztof, > + > +&i2c15 { > + status = "okay"; > + > + eeprom@50 { > + compatible = "atmel,24c128"; > + reg = <0x50>; > + }; > +}; > + > +&adc0 { > + ref_voltage = <2500>; There is no such property in the bindings. > + status = "okay"; > + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default > + &pinctrl_adc2_default &pinctrl_adc3_default > + &pinctrl_adc4_default &pinctrl_adc5_default > + &pinctrl_adc6_default &pinctrl_adc7_default>; > +}; > + > +&adc1 { > + ref_voltage = <2500>; NAK, there is no such property. Thanks for your advice, I will change this property to "aspeed,int-vref-microvolt" which is defined in the binding in the v2 patch. Thanks, Yang Chen Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> 於 2023年9月13日 週三 下午6:04寫道： > On 12/09/2023 16:05, yangchen.openbmc@gmail.com wrote: > > From: Yang Chen <yangchen.openbmc@gmail.com> > > > > Add linux device tree entry related to the Minerva Chassis Management > > Controller (CMC) specific devices connected to the Aspeed SoC (AST2600). > > > > Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> > > --- > > arch/arm/boot/dts/aspeed/Makefile | 1 + > > .../aspeed-bmc-facebook-minerva-cmc.dts | 265 ++++++++++++++++++ > > 2 files changed, 266 insertions(+) > > create mode 100644 > arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts > > > > diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/ > > > > + > > +&i2c15 { > > + status = "okay"; > > + > > + eeprom@50 { > > + compatible = "atmel,24c128"; > > + reg = <0x50>; > > + }; > > +}; > > + > > +&adc0 { > > + ref_voltage = <2500>; > > There is no such property in the bindings. > > > + status = "okay"; > > + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default > > + &pinctrl_adc2_default &pinctrl_adc3_default > > + &pinctrl_adc4_default &pinctrl_adc5_default > > + &pinctrl_adc6_default &pinctrl_adc7_default>; > > +}; > > + > > +&adc1 { > > + ref_voltage = <2500>; > > NAK, there is no such property. > > > > Best regards, > Krzysztof > >
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> 於 2023年9月13日 週三 下午6:04寫道： > > On 12/09/2023 16:05, yangchen.openbmc@gmail.com wrote: > > From: Yang Chen <yangchen.openbmc@gmail.com> > > > > Add linux device tree entry related to the Minerva Chassis Management > > Controller (CMC) specific devices connected to the Aspeed SoC (AST2600). > > > > Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> > > --- > > arch/arm/boot/dts/aspeed/Makefile | 1 + > > .../aspeed-bmc-facebook-minerva-cmc.dts | 265 ++++++++++++++++++ > > 2 files changed, 266 insertions(+) > > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts > > > > diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/ > > > > + > > +&i2c15 { > > + status = "okay"; > > + > > + eeprom@50 { > > + compatible = "atmel,24c128"; > > + reg = <0x50>; > > + }; > > +}; > > + > > +&adc0 { > > + ref_voltage = <2500>; > > There is no such property in the bindings. Thanks for your advice, I will change this property to "aspeed,int-vref-microvolt" which is defined in the binding in the v2 patch. > > > + status = "okay"; > > + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default > > + &pinctrl_adc2_default &pinctrl_adc3_default > > + &pinctrl_adc4_default &pinctrl_adc5_default > > + &pinctrl_adc6_default &pinctrl_adc7_default>; > > +}; > > + > > +&adc1 { > > + ref_voltage = <2500>; > > NAK, there is no such property. Thanks for your advice, I will change this property to "aspeed,int-vref-microvolt" which is defined in the binding in the v2 patch. > > > > Best regards, > Krzysztof >
On Wed, Sep 13, 2023 at 6:04 PM Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > On 12/09/2023 16:05, yangchen.openbmc@gmail.com wrote: > > From: Yang Chen <yangchen.openbmc@gmail.com> > > > > Add linux device tree entry related to the Minerva Chassis Management > > Controller (CMC) specific devices connected to the Aspeed SoC (AST2600). > > > > Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> > > --- > > arch/arm/boot/dts/aspeed/Makefile | 1 + > > .../aspeed-bmc-facebook-minerva-cmc.dts | 265 ++++++++++++++++++ > > 2 files changed, 266 insertions(+) > > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts > > > > diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/ > > > > + > > +&i2c15 { > > + status = "okay"; > > + > > + eeprom@50 { > > + compatible = "atmel,24c128"; > > + reg = <0x50>; > > + }; > > +}; > > + > > +&adc0 { > > + ref_voltage = <2500>; > > There is no such property in the bindings. Hi Krzysztof, I will change this property to the "aspeed,int-vref-microvolt" which is defined in the binding that can choose the ADC internal reference voltage is 1200000 or 2500000 µV, and will add these changes to the v2 patches. > > > + status = "okay"; > > + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default > > + &pinctrl_adc2_default &pinctrl_adc3_default > > + &pinctrl_adc4_default &pinctrl_adc5_default > > + &pinctrl_adc6_default &pinctrl_adc7_default>; > > +}; > > + > > +&adc1 { > > + ref_voltage = <2500>; > > NAK, there is no such property. I will change this property to the "aspeed,int-vref-microvolt" which is defined in the binding that can choose the ADC internal reference voltage is 1200000 or 2500000 µV, and will add these changes to the v2 patches. Thanks, Yang Chen
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile index 23cbc7203a8e..d3ac20e316d0 100644 --- a/arch/arm/boot/dts/aspeed/Makefile +++ b/arch/arm/boot/dts/aspeed/Makefile @@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-fuji.dtb \ aspeed-bmc-facebook-galaxy100.dtb \ aspeed-bmc-facebook-greatlakes.dtb \ + aspeed-bmc-facebook-minerva-cmc.dtb \ aspeed-bmc-facebook-minipack.dtb \ aspeed-bmc-facebook-tiogapass.dtb \ aspeed-bmc-facebook-wedge40.dtb \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts new file mode 100644 index 000000000000..0b986864e661 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva-cmc.dts @@ -0,0 +1,265 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2023 Facebook Inc. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> + +/ { + model = "Facebook Minerva CMC"; + compatible = "facebook,minerva-cmc", "aspeed,ast2600"; + + aliases { + serial5 = &uart5; + }; + + chosen { + stdout-path = "serial5:57600n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 2>; + }; +}; + +&uart6 { + status = "okay"; +}; + +&wdt1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + use-ncsi; + mlx,multi-host; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&rtc { + status = "okay"; +}; + +&sgpiom1 { + status = "okay"; + ngpios = <128>; + bus-frequency = <2000000>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + temperature-sensor@4B { + compatible = "ti,tmp75"; + reg = <0x4B>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; +}; + +&i2c2 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9548"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + }; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&i2c14 { + status = "okay"; + multi-master; + + ipmb@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&i2c15 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; +}; + +&adc0 { + ref_voltage = <2500>; + status = "okay"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + ref_voltage = <2500>; + status = "okay"; + pinctrl-0 = <&pinctrl_adc10_default>; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +};