| Message ID | 20230218171002.8725-1-chanh@os.amperecomputing.com |
|---|---|
| State | Accepted, archived |
| Headers | show |
| Series | ARM: dts: aspeed: mtjade, mtmitchell: Add OCP device temperature sensor | expand |
Dear reviewers, Just a gentle ping for the patch. Thanks, - Chanh On 19/02/2023 00:10, Chanh Nguyen wrote: > Define an I2C alias port from I2C Switch 0x70 at I2C5. > Add the OCP device temperature sensor via I2C alias port > as a tmp421 sensor. > > Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> > --- > .../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 16 ++++++++++ > .../boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 29 +++++++++++++++++++ > 2 files changed, 45 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts > index 0a51d2e32fab..b93339ed61c0 100644 > --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts > +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts > @@ -49,6 +49,11 @@ > */ > i2c80 = &nvme_m2_0; > i2c81 = &nvme_m2_1; > + > + /* > + * i2c bus 82 assigned to OCP slot > + */ > + i2c82 = &ocpslot; > }; > > chosen { > @@ -420,6 +425,17 @@ > reg = <0x70>; > i2c-mux-idle-disconnect; > > + ocpslot: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0>; > + > + ocp_temp: temperature-sensor@1f { > + compatible = "ti,tmp421"; > + reg = <0x1f>; > + }; > + }; > + > nvmeslot_0_7: i2c@3 { > #address-cells = <1>; > #size-cells = <0>; > diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts > index 4b91600eaf62..c832b8ae5999 100644 > --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts > +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts > @@ -10,6 +10,14 @@ > model = "Ampere Mt.Mitchell BMC"; > compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600"; > > + aliases { > + /* > + * i2c bus 30-31 assigned to OCP slot 0-1 > + */ > + i2c30 = &ocpslot_0; > + i2c31 = &ocpslot_1; > + }; > + > chosen { > stdout-path = &uart5; > }; > @@ -424,6 +432,27 @@ > #size-cells = <0>; > reg = <0x70>; > i2c-mux-idle-disconnect; > + > + ocpslot_0: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0>; > + > + ocpslot_0_temp: temperature-sensor@1f { > + compatible = "ti,tmp421"; > + reg = <0x1f>; > + }; > + }; > + ocpslot_1: i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x1>; > + > + ocpslot_1_temp: temperature-sensor@1f { > + compatible = "ti,tmp421"; > + reg = <0x1f>; > + }; > + }; > }; > }; >
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts index 0a51d2e32fab..b93339ed61c0 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts @@ -49,6 +49,11 @@ */ i2c80 = &nvme_m2_0; i2c81 = &nvme_m2_1; + + /* + * i2c bus 82 assigned to OCP slot + */ + i2c82 = &ocpslot; }; chosen { @@ -420,6 +425,17 @@ reg = <0x70>; i2c-mux-idle-disconnect; + ocpslot: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + ocp_temp: temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + nvmeslot_0_7: i2c@3 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts index 4b91600eaf62..c832b8ae5999 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts @@ -10,6 +10,14 @@ model = "Ampere Mt.Mitchell BMC"; compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600"; + aliases { + /* + * i2c bus 30-31 assigned to OCP slot 0-1 + */ + i2c30 = &ocpslot_0; + i2c31 = &ocpslot_1; + }; + chosen { stdout-path = &uart5; }; @@ -424,6 +432,27 @@ #size-cells = <0>; reg = <0x70>; i2c-mux-idle-disconnect; + + ocpslot_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + ocpslot_0_temp: temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + ocpslot_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + ocpslot_1_temp: temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; }; };
Define an I2C alias port from I2C Switch 0x70 at I2C5. Add the OCP device temperature sensor via I2C alias port as a tmp421 sensor. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> --- .../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 16 ++++++++++ .../boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 29 +++++++++++++++++++ 2 files changed, 45 insertions(+)