diff mbox series

[net-next,RESEND,v5,3/3] ARM: dts: aspeed: add reset properties into MDIO nodes

Message ID 20220418014059.3054-4-dylan_hung@aspeedtech.com
State Changes Requested, archived
Headers show
Series Add reset deassertion for Aspeed MDIO | expand

Commit Message

Dylan Hung April 18, 2022, 1:40 a.m. UTC 
Add reset control properties into MDIO nodes.  The 4 MDIO controllers in
AST2600 SOC share one reset control bit SCU50[3].

Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
---
 arch/arm/boot/dts/aspeed-g6.dtsi | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index c32e87fad4dc..ab20ea8d829d 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -181,6 +181,7 @@  mdio0: mdio@1e650000 {
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio1_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio1: mdio@1e650008 {
@@ -191,6 +192,7 @@  mdio1: mdio@1e650008 {
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio2_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio2: mdio@1e650010 {
@@ -201,6 +203,7 @@  mdio2: mdio@1e650010 {
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio3_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio3: mdio@1e650018 {
@@ -211,6 +214,7 @@  mdio3: mdio@1e650018 {
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio4_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mac0: ftgmac@1e660000 {