diff mbox series

[v4,3/3] mmc: sdhci-of-aspeed: Configure the SDHCIs as specified by the devicetree.

Message ID 20210520101346.16772-4-steven_lee@aspeedtech.com
State Not Applicable, archived
Headers show
Series mmc: sdhci-of-aspeed: Support toggling SD bus signal | expand

Commit Message

Steven Lee May 20, 2021, 10:13 a.m. UTC
The hardware provides capability configuration registers for each SDHCI
in the global configuration space for the SD controller. Writes to the
global capability registers are mirrored to the capability registers in
the associated SDHCI. Configuration of the capabilities must be written
through the mirror registers prior to initialisation of the SDHCI.

Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
---
 drivers/mmc/host/sdhci-of-aspeed.c | 48 ++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

Comments

Andrew Jeffery May 21, 2021, 1:06 a.m. UTC | #1
On Thu, 20 May 2021, at 19:43, Steven Lee wrote:
> The hardware provides capability configuration registers for each SDHCI
> in the global configuration space for the SD controller. Writes to the
> global capability registers are mirrored to the capability registers in
> the associated SDHCI. Configuration of the capabilities must be written
> through the mirror registers prior to initialisation of the SDHCI.
> 
> Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Joel Stanley May 21, 2021, 1:28 a.m. UTC | #2
On Thu, 20 May 2021 at 10:16, Steven Lee <steven_lee@aspeedtech.com> wrote:
>
> The hardware provides capability configuration registers for each SDHCI
> in the global configuration space for the SD controller. Writes to the
> global capability registers are mirrored to the capability registers in
> the associated SDHCI. Configuration of the capabilities must be written
> through the mirror registers prior to initialisation of the SDHCI.
>
> Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>

Reviewed-by: Joel Stanley <joel@jms.id.au>

MMC maintainers, please ignore my other mail about taking the dts
patch through your tree. I didn't realise there were two dts patches;
I'll take them both through the aspeed tree once they are ready.
Please don't let that review stop you from applying this patch.

Cheers,

Joel

> ---
>  drivers/mmc/host/sdhci-of-aspeed.c | 48 ++++++++++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-of-aspeed.c b/drivers/mmc/host/sdhci-of-aspeed.c
> index d001c51074a0..65b5685f6c15 100644
> --- a/drivers/mmc/host/sdhci-of-aspeed.c
> +++ b/drivers/mmc/host/sdhci-of-aspeed.c
> @@ -31,6 +31,11 @@
>  #define   ASPEED_SDC_S0_PHASE_OUT_EN   GENMASK(1, 0)
>  #define   ASPEED_SDC_PHASE_MAX         31
>
> +/* SDIO{10,20} */
> +#define ASPEED_SDC_CAP1_1_8V           (0 * 32 + 26)
> +/* SDIO{14,24} */
> +#define ASPEED_SDC_CAP2_SDR104         (1 * 32 + 1)
> +
>  struct aspeed_sdc {
>         struct clk *clk;
>         struct resource *res;
> @@ -72,6 +77,37 @@ struct aspeed_sdhci {
>         const struct aspeed_sdhci_phase_desc *phase_desc;
>  };
>
> +/*
> + * The function sets the mirror register for updating
> + * capbilities of the current slot.
> + *
> + *   slot | capability  | caps_reg | mirror_reg
> + *   -----|-------------|----------|------------
> + *     0  | CAP1_1_8V   | SDIO140  |   SDIO10
> + *     0  | CAP2_SDR104 | SDIO144  |   SDIO14
> + *     1  | CAP1_1_8V   | SDIO240  |   SDIO20
> + *     1  | CAP2_SDR104 | SDIO244  |   SDIO24
> + */
> +static void aspeed_sdc_set_slot_capability(struct sdhci_host *host, struct aspeed_sdc *sdc,
> +                                          int capability, bool enable, u8 slot)
> +{
> +       u32 mirror_reg_offset;
> +       u32 cap_val;
> +       u8 cap_reg;
> +
> +       if (slot > 1)
> +               return;
> +
> +       cap_reg = capability / 32;
> +       cap_val = sdhci_readl(host, 0x40 + (cap_reg * 4));
> +       if (enable)
> +               cap_val |= BIT(capability % 32);
> +       else
> +               cap_val &= ~BIT(capability % 32);
> +       mirror_reg_offset = ((slot + 1) * 0x10) + (cap_reg * 4);
> +       writel(cap_val, sdc->regs + mirror_reg_offset);
> +}
> +
>  static void aspeed_sdc_configure_8bit_mode(struct aspeed_sdc *sdc,
>                                            struct aspeed_sdhci *sdhci,
>                                            bool bus8)
> @@ -328,6 +364,7 @@ static inline int aspeed_sdhci_calculate_slot(struct aspeed_sdhci *dev,
>  static int aspeed_sdhci_probe(struct platform_device *pdev)
>  {
>         const struct aspeed_sdhci_pdata *aspeed_pdata;
> +       struct device_node *np = pdev->dev.of_node;
>         struct sdhci_pltfm_host *pltfm_host;
>         struct aspeed_sdhci *dev;
>         struct sdhci_host *host;
> @@ -372,6 +409,17 @@ static int aspeed_sdhci_probe(struct platform_device *pdev)
>
>         sdhci_get_of_property(pdev);
>
> +       if (of_property_read_bool(np, "mmc-hs200-1_8v") ||
> +           of_property_read_bool(np, "sd-uhs-sdr104")) {
> +               aspeed_sdc_set_slot_capability(host, dev->parent, ASPEED_SDC_CAP1_1_8V,
> +                                              true, slot);
> +       }
> +
> +       if (of_property_read_bool(np, "sd-uhs-sdr104")) {
> +               aspeed_sdc_set_slot_capability(host, dev->parent, ASPEED_SDC_CAP2_SDR104,
> +                                              true, slot);
> +       }
> +
>         pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
>         if (IS_ERR(pltfm_host->clk))
>                 return PTR_ERR(pltfm_host->clk);
> --
> 2.17.1
>
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-of-aspeed.c b/drivers/mmc/host/sdhci-of-aspeed.c
index d001c51074a0..65b5685f6c15 100644
--- a/drivers/mmc/host/sdhci-of-aspeed.c
+++ b/drivers/mmc/host/sdhci-of-aspeed.c
@@ -31,6 +31,11 @@ 
 #define   ASPEED_SDC_S0_PHASE_OUT_EN	GENMASK(1, 0)
 #define   ASPEED_SDC_PHASE_MAX		31
 
+/* SDIO{10,20} */
+#define ASPEED_SDC_CAP1_1_8V           (0 * 32 + 26)
+/* SDIO{14,24} */
+#define ASPEED_SDC_CAP2_SDR104         (1 * 32 + 1)
+
 struct aspeed_sdc {
 	struct clk *clk;
 	struct resource *res;
@@ -72,6 +77,37 @@  struct aspeed_sdhci {
 	const struct aspeed_sdhci_phase_desc *phase_desc;
 };
 
+/*
+ * The function sets the mirror register for updating
+ * capbilities of the current slot.
+ *
+ *   slot | capability  | caps_reg | mirror_reg
+ *   -----|-------------|----------|------------
+ *     0  | CAP1_1_8V   | SDIO140  |   SDIO10
+ *     0  | CAP2_SDR104 | SDIO144  |   SDIO14
+ *     1  | CAP1_1_8V   | SDIO240  |   SDIO20
+ *     1  | CAP2_SDR104 | SDIO244  |   SDIO24
+ */
+static void aspeed_sdc_set_slot_capability(struct sdhci_host *host, struct aspeed_sdc *sdc,
+					   int capability, bool enable, u8 slot)
+{
+	u32 mirror_reg_offset;
+	u32 cap_val;
+	u8 cap_reg;
+
+	if (slot > 1)
+		return;
+
+	cap_reg = capability / 32;
+	cap_val = sdhci_readl(host, 0x40 + (cap_reg * 4));
+	if (enable)
+		cap_val |= BIT(capability % 32);
+	else
+		cap_val &= ~BIT(capability % 32);
+	mirror_reg_offset = ((slot + 1) * 0x10) + (cap_reg * 4);
+	writel(cap_val, sdc->regs + mirror_reg_offset);
+}
+
 static void aspeed_sdc_configure_8bit_mode(struct aspeed_sdc *sdc,
 					   struct aspeed_sdhci *sdhci,
 					   bool bus8)
@@ -328,6 +364,7 @@  static inline int aspeed_sdhci_calculate_slot(struct aspeed_sdhci *dev,
 static int aspeed_sdhci_probe(struct platform_device *pdev)
 {
 	const struct aspeed_sdhci_pdata *aspeed_pdata;
+	struct device_node *np = pdev->dev.of_node;
 	struct sdhci_pltfm_host *pltfm_host;
 	struct aspeed_sdhci *dev;
 	struct sdhci_host *host;
@@ -372,6 +409,17 @@  static int aspeed_sdhci_probe(struct platform_device *pdev)
 
 	sdhci_get_of_property(pdev);
 
+	if (of_property_read_bool(np, "mmc-hs200-1_8v") ||
+	    of_property_read_bool(np, "sd-uhs-sdr104")) {
+		aspeed_sdc_set_slot_capability(host, dev->parent, ASPEED_SDC_CAP1_1_8V,
+					       true, slot);
+	}
+
+	if (of_property_read_bool(np, "sd-uhs-sdr104")) {
+		aspeed_sdc_set_slot_capability(host, dev->parent, ASPEED_SDC_CAP2_SDR104,
+					       true, slot);
+	}
+
 	pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(pltfm_host->clk))
 		return PTR_ERR(pltfm_host->clk);