diff mbox

[2/5,v4] drm/i2c/adv7511: Add audio support

Message ID d56087fae14074198f6c1bc749ce4da3cab62324.1460047238.git.joabreu@synopsys.com
State New
Headers show

Commit Message

Jose Abreu April 7, 2016, 4:53 p.m. UTC
This patch adds audio support for the ADV7511 HDMI transmitter
using ALSA SoC.

The code was ported from Analog Devices linux tree from
commit 1770c4a1e32b ("Merge remote-tracking branch
'xilinx/master' into xcomm_zynq"), which is available at:
	- https://github.com/analogdevicesinc/linux/

The audio can be disabled using menu-config and/or device tree
so it is possible to use only video mode. The audio
(when enabled) registers as a codec into ALSA.

SPDIF DAI format was also added to ASoC as it is required
by adv7511 audio.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
---

No changes v3 -> v4.

Changes v2 -> v3:
* Removed HDMI start at adv7511_core (as suggested by Archit Taneja)
* Use NOP functions for adv7511_audio (as suggested by Archit Taneja)
* Added adv7511_audio_exit() function (as suggested by Archit Taneja)
* Moved adv7511 to its own folder (as suggested by Archit Taneja)
* Compile adv7511 as module if ALSA SoC is compiled as module
* Load adv7511 audio only if declared in device tree (as suggested by Laurent Pinchart)

No changes v1 -> v2.

 .../bindings/display/bridge/adi,adv7511.txt        |   3 +
 drivers/gpu/drm/i2c/adv7511/Kconfig                |  12 +
 drivers/gpu/drm/i2c/adv7511/Makefile               |   1 +
 drivers/gpu/drm/i2c/adv7511/adv7511.h              |  22 ++
 drivers/gpu/drm/i2c/adv7511/adv7511_audio.c        | 310 +++++++++++++++++++++
 drivers/gpu/drm/i2c/adv7511/adv7511_core.c         |  11 +
 include/sound/soc-dai.h                            |   1 +
 7 files changed, 360 insertions(+)
 create mode 100644 drivers/gpu/drm/i2c/adv7511/adv7511_audio.c

Comments

Lars-Peter Clausen April 8, 2016, 3:46 p.m. UTC | #1
On 04/07/2016 06:53 PM, Jose Abreu wrote:
> This patch adds audio support for the ADV7511 HDMI transmitter
> using ALSA SoC.
> 
> The code was ported from Analog Devices linux tree from
> commit 1770c4a1e32b ("Merge remote-tracking branch
> 'xilinx/master' into xcomm_zynq"), which is available at:
> 	- https://github.com/analogdevicesinc/linux/

The reason why this driver is still out of tree, is because there has been
no conclusion yet on how to go forward with the whole HDMI integration. So
this is not going to get merged until that issue has been addressed.

[...]
> +- adi,enable-audio: If set the ADV7511 driver will register a codec interface
> +  into ALSA SoC.

This is not a description of the hardware.

[...]
> diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
> index 964b7de..539c091 100644
> --- a/include/sound/soc-dai.h
> +++ b/include/sound/soc-dai.h
> @@ -33,6 +33,7 @@ struct snd_compr_stream;
>  #define SND_SOC_DAIFMT_DSP_B		5 /* L data MSB during FRM LRC */
>  #define SND_SOC_DAIFMT_AC97		6 /* AC97 */
>  #define SND_SOC_DAIFMT_PDM		7 /* Pulse density modulation */
> +#define SND_SOC_DAIFMT_SPDIF		8 /* SPDIF */

This needs to be a separate patch.
Jose Abreu April 8, 2016, 4:05 p.m. UTC | #2
Hi Lars,


On 08-04-2016 16:46, Lars-Peter Clausen wrote:
> On 04/07/2016 06:53 PM, Jose Abreu wrote:
>> This patch adds audio support for the ADV7511 HDMI transmitter
>> using ALSA SoC.
>>
>> The code was ported from Analog Devices linux tree from
>> commit 1770c4a1e32b ("Merge remote-tracking branch
>> 'xilinx/master' into xcomm_zynq"), which is available at:
>> 	- https://github.com/analogdevicesinc/linux/
> The reason why this driver is still out of tree, is because there has been
> no conclusion yet on how to go forward with the whole HDMI integration. So
> this is not going to get merged until that issue has been addressed.

Ok, will then drop the patches related with adv7511 but will update with your
comments so that when this HDMI issue is addressed I can send again the patches.
Is this okay?

>
> [...]
>> +- adi,enable-audio: If set the ADV7511 driver will register a codec interface
>> +  into ALSA SoC.
> This is not a description of the hardware.

Is this okay: "adi,enable-audio: Set this boolean parameter if ADV7511
transmitter routes audio signals" ?

>
> [...]
>> diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
>> index 964b7de..539c091 100644
>> --- a/include/sound/soc-dai.h
>> +++ b/include/sound/soc-dai.h
>> @@ -33,6 +33,7 @@ struct snd_compr_stream;
>>  #define SND_SOC_DAIFMT_DSP_B		5 /* L data MSB during FRM LRC */
>>  #define SND_SOC_DAIFMT_AC97		6 /* AC97 */
>>  #define SND_SOC_DAIFMT_PDM		7 /* Pulse density modulation */
>> +#define SND_SOC_DAIFMT_SPDIF		8 /* SPDIF */
> This needs to be a separate patch.

Ok.

>
>
> _______________________________________________
> linux-snps-arc mailing list
> linux-snps-arc@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-snps-arc

Best regards,
Jose Miguel Abreu
Jose Abreu April 8, 2016, 4:12 p.m. UTC | #3
Hi Lars,


On 08-04-2016 16:46, Lars-Peter Clausen wrote:
> On 04/07/2016 06:53 PM, Jose Abreu wrote:
>> This patch adds audio support for the ADV7511 HDMI transmitter
>> using ALSA SoC.
>>
>> The code was ported from Analog Devices linux tree from
>> commit 1770c4a1e32b ("Merge remote-tracking branch
>> 'xilinx/master' into xcomm_zynq"), which is available at:
>> 	- https://github.com/analogdevicesinc/linux/
> The reason why this driver is still out of tree, is because there has been
> no conclusion yet on how to go forward with the whole HDMI integration. So
> this is not going to get merged until that issue has been addressed.

Ok, will then drop the patches related with adv7511 but will update with your
comments so that when this HDMI issue is addressed I can send again the patches.
Is this okay?

>
> [...]
>> +- adi,enable-audio: If set the ADV7511 driver will register a codec interface
>> +  into ALSA SoC.
> This is not a description of the hardware.

Is this okay: "adi,enable-audio: Set this boolean parameter if ADV7511
transmitter routes audio signals" ?

>
> [...]
>> diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
>> index 964b7de..539c091 100644
>> --- a/include/sound/soc-dai.h
>> +++ b/include/sound/soc-dai.h
>> @@ -33,6 +33,7 @@ struct snd_compr_stream;
>>  #define SND_SOC_DAIFMT_DSP_B		5 /* L data MSB during FRM LRC */
>>  #define SND_SOC_DAIFMT_AC97		6 /* AC97 */
>>  #define SND_SOC_DAIFMT_PDM		7 /* Pulse density modulation */
>> +#define SND_SOC_DAIFMT_SPDIF		8 /* SPDIF */
> This needs to be a separate patch.

Ok.

>
>
> _______________________________________________
> linux-snps-arc mailing list
> linux-snps-arc@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-snps-arc

Best regards,
Jose Miguel Abreu
Lars-Peter Clausen April 9, 2016, 3:02 p.m. UTC | #4
On 04/08/2016 06:12 PM, Jose Abreu wrote:
[...]
>>
>> [...]
>>> +- adi,enable-audio: If set the ADV7511 driver will register a codec interface
>>> +  into ALSA SoC.
>> This is not a description of the hardware.
> 
> Is this okay: "adi,enable-audio: Set this boolean parameter if ADV7511
> transmitter routes audio signals" ?

I don't think we need this property. There is no problem with registering
the audio part unconditionally. As long as there is no connection we wont
create a sound card that is exposed to userspace.
Jose Abreu April 11, 2016, 9:27 a.m. UTC | #5
Hi Lars,


On 09-04-2016 16:02, Lars-Peter Clausen wrote:
> On 04/08/2016 06:12 PM, Jose Abreu wrote:
> [...]
>>> [...]
>>>> +- adi,enable-audio: If set the ADV7511 driver will register a codec interface
>>>> +  into ALSA SoC.
>>> This is not a description of the hardware.
>> Is this okay: "adi,enable-audio: Set this boolean parameter if ADV7511
>> transmitter routes audio signals" ?
> I don't think we need this property. There is no problem with registering
> the audio part unconditionally. As long as there is no connection we wont
> create a sound card that is exposed to userspace.
>

This change was suggested by Laurent Pinchart and was introduced in v3. Quoting
Laurent:
"The idea is that enabling support for ADV7511 audio in the kernel isn't coupled
with whether the system includes audio support. It would be confusing, and would
also waste resources, to create a Linux sound device when no sound channel is
routed on the board."

Should I revert this?

Best regards,
Jose Miguel Abreu
Lars-Peter Clausen April 11, 2016, 9:33 a.m. UTC | #6
On 04/11/2016 11:27 AM, Jose Abreu wrote:
> Hi Lars,
> 
> 
> On 09-04-2016 16:02, Lars-Peter Clausen wrote:
>> On 04/08/2016 06:12 PM, Jose Abreu wrote:
>> [...]
>>>> [...]
>>>>> +- adi,enable-audio: If set the ADV7511 driver will register a codec interface
>>>>> +  into ALSA SoC.
>>>> This is not a description of the hardware.
>>> Is this okay: "adi,enable-audio: Set this boolean parameter if ADV7511
>>> transmitter routes audio signals" ?
>> I don't think we need this property. There is no problem with registering
>> the audio part unconditionally. As long as there is no connection we wont
>> create a sound card that is exposed to userspace.
>>
> 
> This change was suggested by Laurent Pinchart and was introduced in v3. Quoting
> Laurent:
> "The idea is that enabling support for ADV7511 audio in the kernel isn't coupled
> with whether the system includes audio support. It would be confusing, and would
> also waste resources, to create a Linux sound device when no sound channel is
> routed on the board."

I wouldn't care too much about this at this point, the extra amount of
resources required for registering the CODEC (but not the sound card) is
just a few bytes (sizeof(struct snd_soc_codec)).

Nevertheless what we should do is describe the hardware and from this
information infer whether there is a audio connection or not and if there is
none we might skip registering the CODEC. In my opinion this hardware
description should be modeled using of-graph, having a connection between
the SoC side and the adv7511 SPDIF or I2S port.
Jose Abreu April 11, 2016, 11:32 a.m. UTC | #7
Hi Lars,


On 11-04-2016 10:33, Lars-Peter Clausen wrote:
> On 04/11/2016 11:27 AM, Jose Abreu wrote:
>> Hi Lars,
>>
>>
>> On 09-04-2016 16:02, Lars-Peter Clausen wrote:
>>> On 04/08/2016 06:12 PM, Jose Abreu wrote:
>>> [...]
>>>>> [...]
>>>>>> +- adi,enable-audio: If set the ADV7511 driver will register a codec interface
>>>>>> +  into ALSA SoC.
>>>>> This is not a description of the hardware.
>>>> Is this okay: "adi,enable-audio: Set this boolean parameter if ADV7511
>>>> transmitter routes audio signals" ?
>>> I don't think we need this property. There is no problem with registering
>>> the audio part unconditionally. As long as there is no connection we wont
>>> create a sound card that is exposed to userspace.
>>>
>> This change was suggested by Laurent Pinchart and was introduced in v3. Quoting
>> Laurent:
>> "The idea is that enabling support for ADV7511 audio in the kernel isn't coupled
>> with whether the system includes audio support. It would be confusing, and would
>> also waste resources, to create a Linux sound device when no sound channel is
>> routed on the board."
> I wouldn't care too much about this at this point, the extra amount of
> resources required for registering the CODEC (but not the sound card) is
> just a few bytes (sizeof(struct snd_soc_codec)).
>
> Nevertheless what we should do is describe the hardware and from this
> information infer whether there is a audio connection or not and if there is
> none we might skip registering the CODEC. In my opinion this hardware
> description should be modeled using of-graph, having a connection between
> the SoC side and the adv7511 SPDIF or I2S port.
>

You mean something like this:

sound_playback: sound_playback {
    compatible = "simple-audio-card";
    [...]
    simple-audio-card,format = "i2s";
    [...]
}

adv7511@xx {
    compatible = "adi,adv7511";
    [...]

    ports {
        [...]
        /* Audio Output */
        port@x {
            reg = <x>;
            endpoint {
                remote-endpoint = <&sound_playback>;
            }
        }
    }
}

?

Best regards,
Jose Miguel Abreu
Lars-Peter Clausen April 11, 2016, 12:23 p.m. UTC | #8
On 04/11/2016 01:32 PM, Jose Abreu wrote:
> Hi Lars,
> 
> 
> On 11-04-2016 10:33, Lars-Peter Clausen wrote:
>> On 04/11/2016 11:27 AM, Jose Abreu wrote:
>>> Hi Lars,
>>>
>>>
>>> On 09-04-2016 16:02, Lars-Peter Clausen wrote:
>>>> On 04/08/2016 06:12 PM, Jose Abreu wrote:
>>>> [...]
>>>>>> [...]
>>>>>>> +- adi,enable-audio: If set the ADV7511 driver will register a codec interface
>>>>>>> +  into ALSA SoC.
>>>>>> This is not a description of the hardware.
>>>>> Is this okay: "adi,enable-audio: Set this boolean parameter if ADV7511
>>>>> transmitter routes audio signals" ?
>>>> I don't think we need this property. There is no problem with registering
>>>> the audio part unconditionally. As long as there is no connection we wont
>>>> create a sound card that is exposed to userspace.
>>>>
>>> This change was suggested by Laurent Pinchart and was introduced in v3. Quoting
>>> Laurent:
>>> "The idea is that enabling support for ADV7511 audio in the kernel isn't coupled
>>> with whether the system includes audio support. It would be confusing, and would
>>> also waste resources, to create a Linux sound device when no sound channel is
>>> routed on the board."
>> I wouldn't care too much about this at this point, the extra amount of
>> resources required for registering the CODEC (but not the sound card) is
>> just a few bytes (sizeof(struct snd_soc_codec)).
>>
>> Nevertheless what we should do is describe the hardware and from this
>> information infer whether there is a audio connection or not and if there is
>> none we might skip registering the CODEC. In my opinion this hardware
>> description should be modeled using of-graph, having a connection between
>> the SoC side and the adv7511 SPDIF or I2S port.
>>
> 
> You mean something like this:
> 
> sound_playback: sound_playback {
>     compatible = "simple-audio-card";
>     [...]
>     simple-audio-card,format = "i2s";
>     [...]
> }
> 
> adv7511@xx {
>     compatible = "adi,adv7511";
>     [...]
> 
>     ports {
>         [...]
>         /* Audio Output */
>         port@x {
>             reg = <x>;
>             endpoint {
>                 remote-endpoint = <&sound_playback>;
>             }
>         }
>     }
> }

Yes, something like that. Not exactly like that, but similar. One of the
core concepts of of-graph is that there is always a description of the
connection from both sides, this way each side can independently figure out
where it is connected.

Currently there is also zero support of of-graph in ASoC, so a bit of work
is required to get this integrated properly.
Jose Abreu April 11, 2016, 2:08 p.m. UTC | #9
Hi Lars,


On 11-04-2016 13:23, Lars-Peter Clausen wrote:
> On 04/11/2016 01:32 PM, Jose Abreu wrote:
>> Hi Lars,
>>
>>
>> On 11-04-2016 10:33, Lars-Peter Clausen wrote:
>>> On 04/11/2016 11:27 AM, Jose Abreu wrote:
>>>> Hi Lars,
>>>>
>>>>
>>>> On 09-04-2016 16:02, Lars-Peter Clausen wrote:
>>>>> On 04/08/2016 06:12 PM, Jose Abreu wrote:
>>>>> [...]
>>>>>>> [...]
>>>>>>>> +- adi,enable-audio: If set the ADV7511 driver will register a codec interface
>>>>>>>> +  into ALSA SoC.
>>>>>>> This is not a description of the hardware.
>>>>>> Is this okay: "adi,enable-audio: Set this boolean parameter if ADV7511
>>>>>> transmitter routes audio signals" ?
>>>>> I don't think we need this property. There is no problem with registering
>>>>> the audio part unconditionally. As long as there is no connection we wont
>>>>> create a sound card that is exposed to userspace.
>>>>>
>>>> This change was suggested by Laurent Pinchart and was introduced in v3. Quoting
>>>> Laurent:
>>>> "The idea is that enabling support for ADV7511 audio in the kernel isn't coupled
>>>> with whether the system includes audio support. It would be confusing, and would
>>>> also waste resources, to create a Linux sound device when no sound channel is
>>>> routed on the board."
>>> I wouldn't care too much about this at this point, the extra amount of
>>> resources required for registering the CODEC (but not the sound card) is
>>> just a few bytes (sizeof(struct snd_soc_codec)).
>>>
>>> Nevertheless what we should do is describe the hardware and from this
>>> information infer whether there is a audio connection or not and if there is
>>> none we might skip registering the CODEC. In my opinion this hardware
>>> description should be modeled using of-graph, having a connection between
>>> the SoC side and the adv7511 SPDIF or I2S port.
>>>
>> You mean something like this:
>>
>> sound_playback: sound_playback {
>>     compatible = "simple-audio-card";
>>     [...]
>>     simple-audio-card,format = "i2s";
>>     [...]
>> }
>>
>> adv7511@xx {
>>     compatible = "adi,adv7511";
>>     [...]
>>
>>     ports {
>>         [...]
>>         /* Audio Output */
>>         port@x {
>>             reg = <x>;
>>             endpoint {
>>                 remote-endpoint = <&sound_playback>;
>>             }
>>         }
>>     }
>> }
> Yes, something like that. Not exactly like that, but similar. One of the
> core concepts of of-graph is that there is always a description of the
> connection from both sides, this way each side can independently figure out
> where it is connected.
>
> Currently there is also zero support of of-graph in ASoC, so a bit of work
> is required to get this integrated properly.
>

I also believe this would be the better option but in the meantime can't I
integrate the audio like it is being done in the dw-hdmi driver[1]? In this
driver the audio is registered as a sound card and is conditionally built using
Kconfig, just like I was doing in the previous versions. I know you said the
HDMI audio is still an open issue but it seems that for this case it was accepted.

[1] http://lxr.free-electrons.com/source/drivers/gpu/drm/bridge/dw-hdmi-ahb-audio.c

Best regards,
Jose Miguel Abreu
Lars-Peter Clausen April 11, 2016, 7:34 p.m. UTC | #10
On 04/11/2016 04:08 PM, Jose Abreu wrote:
[...]
>> Currently there is also zero support of of-graph in ASoC, so a bit of work
>> is required to get this integrated properly.
>>
> 
> I also believe this would be the better option but in the meantime can't I
> integrate the audio like it is being done in the dw-hdmi driver[1]? In this
> driver the audio is registered as a sound card and is conditionally built using
> Kconfig, just like I was doing in the previous versions. I know you said the
> HDMI audio is still an open issue but it seems that for this case it was accepted.
> 
> [1] http://lxr.free-electrons.com/source/drivers/gpu/drm/bridge/dw-hdmi-ahb-audio.c

Maybe, but I'm not sure it would work in this case. Resources are probably
better invested in working towards a proper solution.
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
index 96c25ee..920e542 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
@@ -43,6 +43,9 @@  Optional properties:
   data stream (similar to BT.656). Defaults to separate H/V synchronization
   signals.
 
+- adi,enable-audio: If set the ADV7511 driver will register a codec interface
+  into ALSA SoC.
+
 Required nodes:
 
 The ADV7511 has two video ports. Their connections are modelled using the OF
diff --git a/drivers/gpu/drm/i2c/adv7511/Kconfig b/drivers/gpu/drm/i2c/adv7511/Kconfig
index 302c8e34..900f3e9 100644
--- a/drivers/gpu/drm/i2c/adv7511/Kconfig
+++ b/drivers/gpu/drm/i2c/adv7511/Kconfig
@@ -4,3 +4,15 @@  config DRM_I2C_ADV7511
 	help
 	  Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
 
+config DRM_I2C_ADV7511_AUDIO
+	bool "ADV7511 audio"
+	depends on DRM_I2C_ADV7511
+	depends on SND_SOC=y || (SND_SOC && DRM_I2C_ADV7511=m)
+	default y
+	help
+	  This adds support for audio on the ADV7511(W) and ADV7513 HDMI
+	  encoders.
+
+	  By selecting this option the ADV7511 will register a codec interface
+	  into ALSA.
+
diff --git a/drivers/gpu/drm/i2c/adv7511/Makefile b/drivers/gpu/drm/i2c/adv7511/Makefile
index c13f5a1..d68773a 100644
--- a/drivers/gpu/drm/i2c/adv7511/Makefile
+++ b/drivers/gpu/drm/i2c/adv7511/Makefile
@@ -1,2 +1,3 @@ 
 adv7511-y := adv7511_core.o
+adv7511-$(CONFIG_DRM_I2C_ADV7511_AUDIO) += adv7511_audio.o
 obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
diff --git a/drivers/gpu/drm/i2c/adv7511/adv7511.h b/drivers/gpu/drm/i2c/adv7511/adv7511.h
index fcae1ee..35828f0 100644
--- a/drivers/gpu/drm/i2c/adv7511/adv7511.h
+++ b/drivers/gpu/drm/i2c/adv7511/adv7511.h
@@ -10,6 +10,7 @@ 
 #define __DRM_I2C_ADV7511_H__
 
 #include <linux/hdmi.h>
+#include <drm/drmP.h>
 
 #define ADV7511_REG_CHIP_REVISION		0x00
 #define ADV7511_REG_N0				0x01
@@ -241,6 +242,7 @@  enum adv7511_sync_polarity {
  * @sync_pulse:			Select the sync pulse
  * @vsync_polarity:		vsync input signal configuration
  * @hsync_polarity:		hsync input signal configuration
+ * @enable_audio		True if audio is enabled
  */
 struct adv7511_link_config {
 	unsigned int input_color_depth;
@@ -255,6 +257,8 @@  struct adv7511_link_config {
 	enum adv7511_input_sync_pulse sync_pulse;
 	enum adv7511_sync_polarity vsync_polarity;
 	enum adv7511_sync_polarity hsync_polarity;
+
+	bool enable_audio;
 };
 
 /**
@@ -296,6 +300,10 @@  struct adv7511 {
 	bool powered;
 
 	unsigned int f_tmds;
+	unsigned int f_audio;
+
+	unsigned int audio_source;
+	bool enable_audio;
 
 	unsigned int current_edid_segment;
 	uint8_t edid_buf[256];
@@ -317,4 +325,18 @@  struct adv7511 {
 int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet);
 int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet);
 
+#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
+int adv7511_audio_init(struct device *dev);
+void adv7511_audio_exit(struct device *dev);
+#else
+int adv7511_audio_init(struct device *dev)
+{
+	return 0;
+}
+void adv7511_audio_exit(struct device *dev)
+{
+
+}
+#endif
+
 #endif /* __DRM_I2C_ADV7511_H__ */
diff --git a/drivers/gpu/drm/i2c/adv7511/adv7511_audio.c b/drivers/gpu/drm/i2c/adv7511/adv7511_audio.c
new file mode 100644
index 0000000..5562ed5
--- /dev/null
+++ b/drivers/gpu/drm/i2c/adv7511/adv7511_audio.c
@@ -0,0 +1,310 @@ 
+/*
+ * Analog Devices ADV7511 HDMI transmitter driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "adv7511.h"
+
+static const struct snd_soc_dapm_widget adv7511_dapm_widgets[] = {
+	SND_SOC_DAPM_OUTPUT("TMDS"),
+	SND_SOC_DAPM_AIF_IN("AIFIN", "Playback", 0, SND_SOC_NOPM, 0, 0),
+};
+
+static const struct snd_soc_dapm_route adv7511_routes[] = {
+	{ "TMDS", NULL, "AIFIN" },
+};
+
+static void adv7511_calc_cts_n(unsigned int f_tmds, unsigned int fs,
+			       unsigned int *cts, unsigned int *n)
+{
+	switch (fs) {
+	case 32000:
+		*n = 4096;
+		break;
+	case 44100:
+		*n = 6272;
+		break;
+	case 48000:
+		*n = 6144;
+		break;
+	}
+
+	*cts = ((f_tmds * *n) / (128 * fs)) * 1000;
+}
+
+static int adv7511_update_cts_n(struct adv7511 *adv7511)
+{
+	unsigned int cts = 0;
+	unsigned int n = 0;
+
+	adv7511_calc_cts_n(adv7511->f_tmds, adv7511->f_audio, &cts, &n);
+
+	regmap_write(adv7511->regmap, ADV7511_REG_N0, (n >> 16) & 0xf);
+	regmap_write(adv7511->regmap, ADV7511_REG_N1, (n >> 8) & 0xff);
+	regmap_write(adv7511->regmap, ADV7511_REG_N2, n & 0xff);
+
+	regmap_write(adv7511->regmap, ADV7511_REG_CTS_MANUAL0,
+		     (cts >> 16) & 0xf);
+	regmap_write(adv7511->regmap, ADV7511_REG_CTS_MANUAL1,
+		     (cts >> 8) & 0xff);
+	regmap_write(adv7511->regmap, ADV7511_REG_CTS_MANUAL2,
+		     cts & 0xff);
+
+	return 0;
+}
+
+static int adv7511_hw_params(struct snd_pcm_substream *substream,
+			     struct snd_pcm_hw_params *params,
+			     struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_codec *codec = rtd->codec;
+	struct adv7511 *adv7511 = snd_soc_codec_get_drvdata(codec);
+	unsigned int rate;
+	unsigned int len;
+
+	switch (params_rate(params)) {
+	case 32000:
+		rate = ADV7511_SAMPLE_FREQ_32000;
+		break;
+	case 44100:
+		rate = ADV7511_SAMPLE_FREQ_44100;
+		break;
+	case 48000:
+		rate = ADV7511_SAMPLE_FREQ_48000;
+		break;
+	case 88200:
+		rate = ADV7511_SAMPLE_FREQ_88200;
+		break;
+	case 96000:
+		rate = ADV7511_SAMPLE_FREQ_96000;
+		break;
+	case 176400:
+		rate = ADV7511_SAMPLE_FREQ_176400;
+		break;
+	case 192000:
+		rate = ADV7511_SAMPLE_FREQ_192000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		len = ADV7511_I2S_SAMPLE_LEN_16;
+		break;
+	case SNDRV_PCM_FORMAT_S18_3LE:
+		len = ADV7511_I2S_SAMPLE_LEN_18;
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		len = ADV7511_I2S_SAMPLE_LEN_20;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		len = ADV7511_I2S_SAMPLE_LEN_24;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	adv7511->f_audio = params_rate(params);
+
+	adv7511_update_cts_n(adv7511);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CFG3,
+			   ADV7511_AUDIO_CFG3_LEN_MASK, len);
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG,
+			   ADV7511_I2C_FREQ_ID_CFG_RATE_MASK, rate << 4);
+
+	return 0;
+}
+
+static int adv7511_set_dai_fmt(struct snd_soc_dai *codec_dai,
+			       unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct adv7511 *adv7511 = snd_soc_codec_get_drvdata(codec);
+	unsigned int audio_source, i2s_format = 0;
+	unsigned int invert_clock;
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		audio_source = ADV7511_AUDIO_SOURCE_I2S;
+		i2s_format = ADV7511_I2S_FORMAT_I2S;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		audio_source = ADV7511_AUDIO_SOURCE_I2S;
+		i2s_format = ADV7511_I2S_FORMAT_RIGHT_J;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		audio_source = ADV7511_AUDIO_SOURCE_I2S;
+		i2s_format = ADV7511_I2S_FORMAT_LEFT_J;
+		break;
+	case SND_SOC_DAIFMT_SPDIF:
+		audio_source = ADV7511_AUDIO_SOURCE_SPDIF;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		invert_clock = 0;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		invert_clock = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_SOURCE, 0x70,
+			   audio_source << 4);
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG, BIT(6),
+			   invert_clock << 6);
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_I2S_CONFIG, 0x03,
+			   i2s_format);
+
+	adv7511->audio_source = audio_source;
+
+	return 0;
+}
+
+static int adv7511_set_bias_level(struct snd_soc_codec *codec,
+				  enum snd_soc_bias_level level)
+{
+	struct adv7511 *adv7511 = snd_soc_codec_get_drvdata(codec);
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		switch (adv7511->audio_source) {
+		case ADV7511_AUDIO_SOURCE_I2S:
+			break;
+		case ADV7511_AUDIO_SOURCE_SPDIF:
+			regmap_update_bits(adv7511->regmap,
+					   ADV7511_REG_AUDIO_CONFIG, BIT(7),
+					   BIT(7));
+			break;
+		}
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_STANDBY) {
+			adv7511_packet_enable(adv7511,
+					ADV7511_PACKET_ENABLE_AUDIO_SAMPLE);
+			adv7511_packet_enable(adv7511,
+					ADV7511_PACKET_ENABLE_AUDIO_INFOFRAME);
+			adv7511_packet_enable(adv7511,
+					ADV7511_PACKET_ENABLE_N_CTS);
+		} else {
+			adv7511_packet_disable(adv7511,
+					ADV7511_PACKET_ENABLE_AUDIO_SAMPLE);
+			adv7511_packet_disable(adv7511,
+					ADV7511_PACKET_ENABLE_AUDIO_INFOFRAME);
+			adv7511_packet_disable(adv7511,
+					ADV7511_PACKET_ENABLE_N_CTS);
+		}
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG,
+				   BIT(7), 0);
+		break;
+	case SND_SOC_BIAS_OFF:
+		break;
+	}
+	return 0;
+}
+
+#define ADV7511_RATES (SNDRV_PCM_RATE_32000 |\
+		SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
+		SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |\
+		SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000)
+
+#define ADV7511_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S18_3LE |\
+		SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE)
+
+static const struct snd_soc_dai_ops adv7511_dai_ops = {
+	.hw_params	= adv7511_hw_params,
+	/*.set_sysclk	= adv7511_set_dai_sysclk,*/
+	.set_fmt	= adv7511_set_dai_fmt,
+};
+
+static struct snd_soc_dai_driver adv7511_dai = {
+	.name = "adv7511",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = ADV7511_RATES,
+		.formats = ADV7511_FORMATS,
+	},
+	.ops = &adv7511_dai_ops,
+};
+
+static int adv7511_suspend(struct snd_soc_codec *codec)
+{
+	return adv7511_set_bias_level(codec, SND_SOC_BIAS_OFF);
+}
+
+static int adv7511_resume(struct snd_soc_codec *codec)
+{
+	return adv7511_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+}
+
+static int adv7511_probe(struct snd_soc_codec *codec)
+{
+	return adv7511_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+}
+
+static int adv7511_remove(struct snd_soc_codec *codec)
+{
+	adv7511_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	return 0;
+}
+
+static struct snd_soc_codec_driver adv7511_codec_driver = {
+	.probe		    = adv7511_probe,
+	.remove		    = adv7511_remove,
+	.suspend	    = adv7511_suspend,
+	.resume		    = adv7511_resume,
+	.set_bias_level	    = adv7511_set_bias_level,
+
+	.dapm_widgets	    = adv7511_dapm_widgets,
+	.num_dapm_widgets   = ARRAY_SIZE(adv7511_dapm_widgets),
+	.dapm_routes	    = adv7511_routes,
+	.num_dapm_routes    = ARRAY_SIZE(adv7511_routes),
+};
+
+int adv7511_audio_init(struct device *dev)
+{
+	return snd_soc_register_codec(dev, &adv7511_codec_driver,
+			&adv7511_dai, 1);
+}
+
+void adv7511_audio_exit(struct device *dev)
+{
+	snd_soc_unregister_codec(dev);
+}
diff --git a/drivers/gpu/drm/i2c/adv7511/adv7511_core.c b/drivers/gpu/drm/i2c/adv7511/adv7511_core.c
index 2b00581..140a64b 100644
--- a/drivers/gpu/drm/i2c/adv7511/adv7511_core.c
+++ b/drivers/gpu/drm/i2c/adv7511/adv7511_core.c
@@ -329,6 +329,7 @@  static void adv7511_set_link_config(struct adv7511 *adv7511,
 	adv7511->hsync_polarity = config->hsync_polarity;
 	adv7511->vsync_polarity = config->vsync_polarity;
 	adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
+	adv7511->enable_audio = config->enable_audio;
 }
 
 static void adv7511_power_on(struct adv7511 *adv7511)
@@ -822,6 +823,7 @@  static int adv7511_parse_dt(struct device_node *np,
 		return -EINVAL;
 
 	config->embedded_sync = of_property_read_bool(np, "adi,embedded-sync");
+	config->enable_audio = of_property_read_bool(np, "adi,enable-audio");
 
 	/* Hardcode the sync pulse configurations for now. */
 	config->sync_pulse = ADV7511_INPUT_SYNC_PULSE_NONE;
@@ -916,6 +918,12 @@  static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 
 	adv7511_set_link_config(adv7511, &link_config);
 
+	if (link_config.enable_audio) {
+		ret = adv7511_audio_init(&i2c->dev);
+		if (ret)
+			goto err_i2c_unregister_device;
+	}
+
 	return 0;
 
 err_i2c_unregister_device:
@@ -930,6 +938,9 @@  static int adv7511_remove(struct i2c_client *i2c)
 
 	i2c_unregister_device(adv7511->i2c_edid);
 
+	if (adv7511->enable_audio)
+		adv7511_audio_exit(&i2c->dev);
+
 	kfree(adv7511->edid);
 
 	return 0;
diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
index 964b7de..539c091 100644
--- a/include/sound/soc-dai.h
+++ b/include/sound/soc-dai.h
@@ -33,6 +33,7 @@  struct snd_compr_stream;
 #define SND_SOC_DAIFMT_DSP_B		5 /* L data MSB during FRM LRC */
 #define SND_SOC_DAIFMT_AC97		6 /* AC97 */
 #define SND_SOC_DAIFMT_PDM		7 /* Pulse density modulation */
+#define SND_SOC_DAIFMT_SPDIF		8 /* SPDIF */
 
 /* left and right justified also known as MSB and LSB respectively */
 #define SND_SOC_DAIFMT_MSB		SND_SOC_DAIFMT_LEFT_J