diff mbox

[5/5] ARC: DTS: Add device-tree for Anarion-based development board

Message ID 20170728220707.13960-6-alex.g@adaptrum.com
State New
Headers show

Commit Message

Alexandru Gagniuc July 28, 2017, 10:07 p.m. UTC 
Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
---
 arch/arc/boot/dts/adaptrum_anarion.dtsi     | 107 ++++++++++++++++++++++++++++
 arch/arc/boot/dts/adaptrum_anarion_fpga.dts |  49 +++++++++++++
 2 files changed, 156 insertions(+)
 create mode 100644 arch/arc/boot/dts/adaptrum_anarion.dtsi
 create mode 100644 arch/arc/boot/dts/adaptrum_anarion_fpga.dts

Comments

Vineet Gupta July 31, 2017, 6:32 a.m. UTC | #1 
On 07/29/2017 03:37 AM, Alexandru Gagniuc wrote:
> Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
> ---
>   arch/arc/boot/dts/adaptrum_anarion.dtsi     | 107 ++++++++++++++++++++++++++++
>   arch/arc/boot/dts/adaptrum_anarion_fpga.dts |  49 +++++++++++++
>   2 files changed, 156 insertions(+)
>   create mode 100644 arch/arc/boot/dts/adaptrum_anarion.dtsi
>   create mode 100644 arch/arc/boot/dts/adaptrum_anarion_fpga.dts

So you really need to upstream the fpga dts - if this just for initial bringup and 
you will eventually switch to silicon.
The reason I say is every additional file is a maintenance burden so better to 
avoid things which are only temporary.
But if you plan to support this config in long run I'm fine !

Looking further it seems first one is a "common" include style dts while fpga is 
for actual platform and the SoC one will follow once you get it running ?

>
> diff --git a/arch/arc/boot/dts/adaptrum_anarion.dtsi b/arch/arc/boot/dts/adaptrum_anarion.dtsi
> new file mode 100644
> index 0000000..f50958f
> --- /dev/null
> +++ b/arch/arc/boot/dts/adaptrum_anarion.dtsi
> @@ -0,0 +1,107 @@
> +/*
> + * (C) Copyright 2017 Adaptrum, Inc.
> + * Written by Alexandru Gagniuc <alex.g@adaptrum.com> for Adaptrum, Inc.
> + * Licensed under the GPLv2 or (at your option) any later version
> + */
> +
> +#include "skeleton.dtsi"

Perhaps put a one liner that this is based on SNPS ARC700 cpu !

> +
> +/ {
> +	compatible = "adaptrum,anarion";
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	soc {
> +		compatible = "simple-bus";
> +		device_type = "soc";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +		interrupt-parent = <&core_intc>;
> +
> +		core_intc: interrupt-controller {
> +			compatible = "snps,arc700-intc";
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +		};
> +
> +		uart0: serial@f2202100 {
> +			compatible = "ns16550";
> +			reg = <0xf2202100 0x20>;
> +			interrupts = <8>;
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			clock-frequency = <192000000>;
> +			status = "disabled";
> +		};
> +
> +		uart1: serial@f2202200 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0xf2202200 0x20>;
> +			interrupts = <8>;
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			clock-frequency = <192000000>;
> +			status = "disabled";
> +		};
> +
> +		uart2: serial@f2202300 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0xf2202300 0x20>;
> +			interrupts = <8>;
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			clock-frequency = <192000000>;
> +			status = "disabled";
> +		};
> +
> +		uart3: serial@f2202400 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0xf2202400 0x20>;
> +			interrupts = <8>;
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			clock-frequency = <192000000>;
> +			status = "disabled";
> +		};
> +
> +		qspi: qspi@f200f000 {
> +			compatible = "adaptrum,anarion-qspi";
> +			reg = <0xf200f000 0x1000>,
> +			      <0x20000000 0x08000000>;
> +
> +			interrupts = <10>;
> +			status = "disabled";
> +		};
> +
> +		gmac0: ethernet@f2010000 {
> +			compatible = "snps,dwmac";
> +			reg = <0xf2010000 0x4000>;
> +
> +			interrupt-parent = <&core_intc>;
> +			interrupts = <20>;
> +			interrupt-names = "macirq";
> +
> +			clocks = <&core_clk>;
> +			clock-names = "stmmaceth";
> +
> +			snps,pbl = <32>;
> +			status = "disabled";
> +		};
> +
> +		gmac1: ethernet@f2014000 {
> +			compatible = "adaptrum,anarion-gmac", "snps,dwmac";
> +			reg = <0xf2014000 0x4000>, <0xf2018100 8>;
> +
> +			interrupt-parent = <&core_intc>;
> +			interrupts = <21>;
> +			interrupt-names = "macirq";
> +
> +			clocks = <&core_clk>;
> +			clock-names = "stmmaceth";
> +
> +			snps,pbl = <32>;
> +			status = "disabled";
> +		};
> +	};
> +};
> diff --git a/arch/arc/boot/dts/adaptrum_anarion_fpga.dts b/arch/arc/boot/dts/adaptrum_anarion_fpga.dts
> new file mode 100644
> index 0000000..36173b2
> --- /dev/null
> +++ b/arch/arc/boot/dts/adaptrum_anarion_fpga.dts
> @@ -0,0 +1,49 @@
> +/*
> + * (C) Copyright 2017 Adaptrum, Inc.
> + * Written by Alexandru Gagniuc <alex.g@adaptrum.com> for Adaptrum, Inc.
> + * Licensed under the GPLv2 or (at your option) any later version
> + */
> +
> +/dts-v1/;
> +
> +#include "adaptrum_anarion.dtsi"
> +
> +/ {
> +	model = "adaptrum,anarion";
> +	compatible = "adaptrum,anarion";
> +
> +	chosen {
> +		bootargs = "earlycon console=ttyS0,115200n8";
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	core_clk: core_clk {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <12000000>;
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&qspi {
> +	status = "okay";
> +	flash0: w25q128fvn@0 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "winbond,w25q128", "jedec,spi-nor";
> +		spi-max-frequency = <70000000>;
> +		m25p,fast-read;
> +	};
> +};
> +
> +&gmac1 {
> +	phy-mode = "rgmii";
> +	status = "okay";
> +};
Alexandru Gagniuc July 31, 2017, 3:08 p.m. UTC | #2 
On 07/30/2017 11:32 PM, Vineet Gupta wrote:
> On 07/29/2017 03:37 AM, Alexandru Gagniuc wrote:
>> Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
>> ---
>>   arch/arc/boot/dts/adaptrum_anarion.dtsi     | 107
>> ++++++++++++++++++++++++++++
>>   arch/arc/boot/dts/adaptrum_anarion_fpga.dts |  49 +++++++++++++
>>   2 files changed, 156 insertions(+)
>>   create mode 100644 arch/arc/boot/dts/adaptrum_anarion.dtsi
>>   create mode 100644 arch/arc/boot/dts/adaptrum_anarion_fpga.dts
>
> So you really need to upstream the fpga dts - if this just for initial
> bringup and you will eventually switch to silicon.
> The reason I say is every additional file is a maintenance burden so
> better to avoid things which are only temporary.
> But if you plan to support this config in long run I'm fine !
>
> Looking further it seems first one is a "common" include style dts while
> fpga is for actual platform and the SoC one will follow once you get it
> running ?

That is correct. the '_fpga.dts' is the tree for the current emulation 
board. The plan is to use the fpga platform until the actual silicon 
arrives and is brought up. I included the _fpga dts in order to have a 
way to verify that the anarion DTSI compiles. I also plan to later 
remove the fpga dts once the actual silicon works.

[snip]

>> +#include "skeleton.dtsi"
>
> Perhaps put a one liner that this is based on SNPS ARC700 cpu !

Staged for [PATCH v2].

Alex

>> +
>> +/ {
>> +    compatible = "adaptrum,anarion";
>> +    #address-cells = <1>;
>> +    #size-cells = <1>;
>> +
>> +    soc {
>> +        compatible = "simple-bus";
>> +        device_type = "soc";
>> +        #address-cells = <1>;
>> +        #size-cells = <1>;
>> +        ranges;
>> +        interrupt-parent = <&core_intc>;
>> +
>> +        core_intc: interrupt-controller {
>> +            compatible = "snps,arc700-intc";
>> +            interrupt-controller;
>> +            #interrupt-cells = <1>;
>> +        };
>> +
>> +        uart0: serial@f2202100 {
>> +            compatible = "ns16550";
>> +            reg = <0xf2202100 0x20>;
>> +            interrupts = <8>;
>> +            reg-shift = <2>;
>> +            reg-io-width = <4>;
>> +            clock-frequency = <192000000>;
>> +            status = "disabled";
>> +        };
>> +
>> +        uart1: serial@f2202200 {
>> +            compatible = "snps,dw-apb-uart";
>> +            reg = <0xf2202200 0x20>;
>> +            interrupts = <8>;
>> +            reg-shift = <2>;
>> +            reg-io-width = <4>;
>> +            clock-frequency = <192000000>;
>> +            status = "disabled";
>> +        };
>> +
>> +        uart2: serial@f2202300 {
>> +            compatible = "snps,dw-apb-uart";
>> +            reg = <0xf2202300 0x20>;
>> +            interrupts = <8>;
>> +            reg-shift = <2>;
>> +            reg-io-width = <4>;
>> +            clock-frequency = <192000000>;
>> +            status = "disabled";
>> +        };
>> +
>> +        uart3: serial@f2202400 {
>> +            compatible = "snps,dw-apb-uart";
>> +            reg = <0xf2202400 0x20>;
>> +            interrupts = <8>;
>> +            reg-shift = <2>;
>> +            reg-io-width = <4>;
>> +            clock-frequency = <192000000>;
>> +            status = "disabled";
>> +        };
>> +
>> +        qspi: qspi@f200f000 {
>> +            compatible = "adaptrum,anarion-qspi";
>> +            reg = <0xf200f000 0x1000>,
>> +                  <0x20000000 0x08000000>;
>> +
>> +            interrupts = <10>;
>> +            status = "disabled";
>> +        };
>> +
>> +        gmac0: ethernet@f2010000 {
>> +            compatible = "snps,dwmac";
>> +            reg = <0xf2010000 0x4000>;
>> +
>> +            interrupt-parent = <&core_intc>;
>> +            interrupts = <20>;
>> +            interrupt-names = "macirq";
>> +
>> +            clocks = <&core_clk>;
>> +            clock-names = "stmmaceth";
>> +
>> +            snps,pbl = <32>;
>> +            status = "disabled";
>> +        };
>> +
>> +        gmac1: ethernet@f2014000 {
>> +            compatible = "adaptrum,anarion-gmac", "snps,dwmac";
>> +            reg = <0xf2014000 0x4000>, <0xf2018100 8>;
>> +
>> +            interrupt-parent = <&core_intc>;
>> +            interrupts = <21>;
>> +            interrupt-names = "macirq";
>> +
>> +            clocks = <&core_clk>;
>> +            clock-names = "stmmaceth";
>> +
>> +            snps,pbl = <32>;
>> +            status = "disabled";
>> +        };
>> +    };
>> +};
>> diff --git a/arch/arc/boot/dts/adaptrum_anarion_fpga.dts
>> b/arch/arc/boot/dts/adaptrum_anarion_fpga.dts
>> new file mode 100644
>> index 0000000..36173b2
>> --- /dev/null
>> +++ b/arch/arc/boot/dts/adaptrum_anarion_fpga.dts
>> @@ -0,0 +1,49 @@
>> +/*
>> + * (C) Copyright 2017 Adaptrum, Inc.
>> + * Written by Alexandru Gagniuc <alex.g@adaptrum.com> for Adaptrum, Inc.
>> + * Licensed under the GPLv2 or (at your option) any later version
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "adaptrum_anarion.dtsi"
>> +
>> +/ {
>> +    model = "adaptrum,anarion";
>> +    compatible = "adaptrum,anarion";
>> +
>> +    chosen {
>> +        bootargs = "earlycon console=ttyS0,115200n8";
>> +        stdout-path = "serial0:115200n8";
>> +    };
>> +
>> +    aliases {
>> +        serial0 = &uart0;
>> +    };
>> +
>> +    core_clk: core_clk {
>> +        #clock-cells = <0>;
>> +        compatible = "fixed-clock";
>> +        clock-frequency = <12000000>;
>> +    };
>> +};
>> +
>> +&uart0 {
>> +    status = "okay";
>> +};
>> +
>> +&qspi {
>> +    status = "okay";
>> +    flash0: w25q128fvn@0 {
>> +        #address-cells = <1>;
>> +        #size-cells = <1>;
>> +        compatible = "winbond,w25q128", "jedec,spi-nor";
>> +        spi-max-frequency = <70000000>;
>> +        m25p,fast-read;
>> +    };
>> +};
>> +
>> +&gmac1 {
>> +    phy-mode = "rgmii";
>> +    status = "okay";
>> +};
>
diff mbox

Patch

diff --git a/arch/arc/boot/dts/adaptrum_anarion.dtsi b/arch/arc/boot/dts/adaptrum_anarion.dtsi
new file mode 100644
index 0000000..f50958f
--- /dev/null
+++ b/arch/arc/boot/dts/adaptrum_anarion.dtsi
@@ -0,0 +1,107 @@ 
+/*
+ * (C) Copyright 2017 Adaptrum, Inc.
+ * Written by Alexandru Gagniuc <alex.g@adaptrum.com> for Adaptrum, Inc.
+ * Licensed under the GPLv2 or (at your option) any later version
+ */
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "adaptrum,anarion";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	soc {
+		compatible = "simple-bus";
+		device_type = "soc";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&core_intc>;
+
+		core_intc: interrupt-controller {
+			compatible = "snps,arc700-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@f2202100 {
+			compatible = "ns16550";
+			reg = <0xf2202100 0x20>;
+			interrupts = <8>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <192000000>;
+			status = "disabled";
+		};
+
+		uart1: serial@f2202200 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xf2202200 0x20>;
+			interrupts = <8>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <192000000>;
+			status = "disabled";
+		};
+
+		uart2: serial@f2202300 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xf2202300 0x20>;
+			interrupts = <8>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <192000000>;
+			status = "disabled";
+		};
+
+		uart3: serial@f2202400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xf2202400 0x20>;
+			interrupts = <8>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <192000000>;
+			status = "disabled";
+		};
+
+		qspi: qspi@f200f000 {
+			compatible = "adaptrum,anarion-qspi";
+			reg = <0xf200f000 0x1000>,
+			      <0x20000000 0x08000000>;
+
+			interrupts = <10>;
+			status = "disabled";
+		};
+
+		gmac0: ethernet@f2010000 {
+			compatible = "snps,dwmac";
+			reg = <0xf2010000 0x4000>;
+
+			interrupt-parent = <&core_intc>;
+			interrupts = <20>;
+			interrupt-names = "macirq";
+
+			clocks = <&core_clk>;
+			clock-names = "stmmaceth";
+
+			snps,pbl = <32>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@f2014000 {
+			compatible = "adaptrum,anarion-gmac", "snps,dwmac";
+			reg = <0xf2014000 0x4000>, <0xf2018100 8>;
+
+			interrupt-parent = <&core_intc>;
+			interrupts = <21>;
+			interrupt-names = "macirq";
+
+			clocks = <&core_clk>;
+			clock-names = "stmmaceth";
+
+			snps,pbl = <32>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/adaptrum_anarion_fpga.dts b/arch/arc/boot/dts/adaptrum_anarion_fpga.dts
new file mode 100644
index 0000000..36173b2
--- /dev/null
+++ b/arch/arc/boot/dts/adaptrum_anarion_fpga.dts
@@ -0,0 +1,49 @@ 
+/*
+ * (C) Copyright 2017 Adaptrum, Inc.
+ * Written by Alexandru Gagniuc <alex.g@adaptrum.com> for Adaptrum, Inc.
+ * Licensed under the GPLv2 or (at your option) any later version
+ */
+
+/dts-v1/;
+
+#include "adaptrum_anarion.dtsi"
+
+/ {
+	model = "adaptrum,anarion";
+	compatible = "adaptrum,anarion";
+
+	chosen {
+		bootargs = "earlycon console=ttyS0,115200n8";
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	core_clk: core_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	flash0: w25q128fvn@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		spi-max-frequency = <70000000>;
+		m25p,fast-read;
+	};
+};
+
+&gmac1 {
+	phy-mode = "rgmii";
+	status = "okay";
+};