@@ -9,9 +9,9 @@
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
-PKG_VERSION:=2016.03
+PKG_VERSION:=2017.07
-PKG_HASH:=e49337262ecac44dbdeac140f2c6ebd1eba345e0162b0464172e7f05583ed7bb
+PKG_HASH:=5374bfdc8acb9a38c025371b1ff20f45e7533668e84e685d0df5d9e7c0e4feff
PKG_MAINTAINER:=Zoltan HERPAI <wigyori@uid0.hu>
@@ -1,8 +1,7 @@
--- /dev/null
+++ b/configs/OLIMEX_A13_SOM_defconfig
-@@ -0,0 +1,18 @@
+@@ -0,0 +1,17 @@
+CONFIG_SPL=y
-+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
@@ -1,16 +1,16 @@
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
-@@ -152,6 +152,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
+@@ -254,6 +254,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-m9.dtb \
sun6i-a31-mele-a1000g-quad.dtb \
sun6i-a31-mixtile-loftq.dtb \
+ sun6i-a31-pangolin.dtb \
+ sun6i-a31s-colorfly-e708-q1.dtb \
sun6i-a31s-cs908.dtb \
- sun6i-a31s-primo81.dtb \
- sun6i-a31s-sinovoip-bpi-m2.dtb
+ sun6i-a31s-inet-q972.dtb \
--- a/arch/arm/dts/sun6i-a31.dtsi
+++ b/arch/arm/dts/sun6i-a31.dtsi
-@@ -643,6 +643,13 @@
+@@ -679,6 +679,13 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
@@ -358,17 +358,9 @@
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SUNXI_SPI=y
---- a/board/sunxi/Kconfig
-+++ b/board/sunxi/Kconfig
-@@ -15,7 +15,6 @@ config SUNXI_GEN_SUN6I
- separate ahb reset control registers, custom pmic bus, new style
- watchdog, etc.
-
--
- choice
- prompt "Sunxi SoC Variant"
- optional
-@@ -533,6 +532,14 @@ config VIDEO_LCD_PANEL_I2C_SCL
+--- a/arch/arm/mach-sunxi/Kconfig
++++ b/arch/arm/mach-sunxi/Kconfig
+@@ -746,6 +746,14 @@ config VIDEO_LCD_PANEL_I2C_SCL
Set the SCL pin for the LCD i2c interface. This takes a string in the
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
deleted file mode 100644
@@ -1,1403 +0,0 @@
-From 4bb656e9dde2019cb42ac4c27b3a114a801ad127 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 16 Mar 2016 13:41:23 +0100
-Subject: [PATCH] include/dt-bindings: Sync some files with the kernel
-
-This commit syncs the dt-bindings/input/* headers with the kernel (v4.5)
-and adds dt-bindings/clock/sun4i-a10-pll2.h, both are necessary for newer
-sunxi dts files to build.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Reviewed-by: Tom Rini <trini@konsulko.com>
-Acked-by: Ian Campbell <ijc@hellion.org.uk>
----
- include/dt-bindings/clock/sun4i-a10-pll2.h | 53 ++
- include/dt-bindings/input/input.h | 510 +---------------
- include/dt-bindings/input/linux-event-codes.h | 805 ++++++++++++++++++++++++++
- 3 files changed, 859 insertions(+), 509 deletions(-)
- create mode 100644 include/dt-bindings/clock/sun4i-a10-pll2.h
- create mode 100644 include/dt-bindings/input/linux-event-codes.h
-
---- /dev/null
-+++ b/include/dt-bindings/clock/sun4i-a10-pll2.h
-@@ -0,0 +1,53 @@
-+/*
-+ * Copyright 2015 Maxime Ripard
-+ *
-+ * Maxime Ripard <maxime.ripard@free-electrons.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#ifndef __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_
-+#define __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_
-+
-+#define SUN4I_A10_PLL2_1X 0
-+#define SUN4I_A10_PLL2_2X 1
-+#define SUN4I_A10_PLL2_4X 2
-+#define SUN4I_A10_PLL2_8X 3
-+
-+#endif /* __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_ */
---- a/include/dt-bindings/input/input.h
-+++ b/include/dt-bindings/input/input.h
-@@ -9,515 +9,7 @@
- #ifndef _DT_BINDINGS_INPUT_INPUT_H
- #define _DT_BINDINGS_INPUT_INPUT_H
-
--#define KEY_RESERVED 0
--#define KEY_ESC 1
--#define KEY_1 2
--#define KEY_2 3
--#define KEY_3 4
--#define KEY_4 5
--#define KEY_5 6
--#define KEY_6 7
--#define KEY_7 8
--#define KEY_8 9
--#define KEY_9 10
--#define KEY_0 11
--#define KEY_MINUS 12
--#define KEY_EQUAL 13
--#define KEY_BACKSPACE 14
--#define KEY_TAB 15
--#define KEY_Q 16
--#define KEY_W 17
--#define KEY_E 18
--#define KEY_R 19
--#define KEY_T 20
--#define KEY_Y 21
--#define KEY_U 22
--#define KEY_I 23
--#define KEY_O 24
--#define KEY_P 25
--#define KEY_LEFTBRACE 26
--#define KEY_RIGHTBRACE 27
--#define KEY_ENTER 28
--#define KEY_LEFTCTRL 29
--#define KEY_A 30
--#define KEY_S 31
--#define KEY_D 32
--#define KEY_F 33
--#define KEY_G 34
--#define KEY_H 35
--#define KEY_J 36
--#define KEY_K 37
--#define KEY_L 38
--#define KEY_SEMICOLON 39
--#define KEY_APOSTROPHE 40
--#define KEY_GRAVE 41
--#define KEY_LEFTSHIFT 42
--#define KEY_BACKSLASH 43
--#define KEY_Z 44
--#define KEY_X 45
--#define KEY_C 46
--#define KEY_V 47
--#define KEY_B 48
--#define KEY_N 49
--#define KEY_M 50
--#define KEY_COMMA 51
--#define KEY_DOT 52
--#define KEY_SLASH 53
--#define KEY_RIGHTSHIFT 54
--#define KEY_KPASTERISK 55
--#define KEY_LEFTALT 56
--#define KEY_SPACE 57
--#define KEY_CAPSLOCK 58
--#define KEY_F1 59
--#define KEY_F2 60
--#define KEY_F3 61
--#define KEY_F4 62
--#define KEY_F5 63
--#define KEY_F6 64
--#define KEY_F7 65
--#define KEY_F8 66
--#define KEY_F9 67
--#define KEY_F10 68
--#define KEY_NUMLOCK 69
--#define KEY_SCROLLLOCK 70
--#define KEY_KP7 71
--#define KEY_KP8 72
--#define KEY_KP9 73
--#define KEY_KPMINUS 74
--#define KEY_KP4 75
--#define KEY_KP5 76
--#define KEY_KP6 77
--#define KEY_KPPLUS 78
--#define KEY_KP1 79
--#define KEY_KP2 80
--#define KEY_KP3 81
--#define KEY_KP0 82
--#define KEY_KPDOT 83
--
--#define KEY_ZENKAKUHANKAKU 85
--#define KEY_102ND 86
--#define KEY_F11 87
--#define KEY_F12 88
--#define KEY_RO 89
--#define KEY_KATAKANA 90
--#define KEY_HIRAGANA 91
--#define KEY_HENKAN 92
--#define KEY_KATAKANAHIRAGANA 93
--#define KEY_MUHENKAN 94
--#define KEY_KPJPCOMMA 95
--#define KEY_KPENTER 96
--#define KEY_RIGHTCTRL 97
--#define KEY_KPSLASH 98
--#define KEY_SYSRQ 99
--#define KEY_RIGHTALT 100
--#define KEY_LINEFEED 101
--#define KEY_HOME 102
--#define KEY_UP 103
--#define KEY_PAGEUP 104
--#define KEY_LEFT 105
--#define KEY_RIGHT 106
--#define KEY_END 107
--#define KEY_DOWN 108
--#define KEY_PAGEDOWN 109
--#define KEY_INSERT 110
--#define KEY_DELETE 111
--#define KEY_MACRO 112
--#define KEY_MUTE 113
--#define KEY_VOLUMEDOWN 114
--#define KEY_VOLUMEUP 115
--#define KEY_POWER 116 /* SC System Power Down */
--#define KEY_KPEQUAL 117
--#define KEY_KPPLUSMINUS 118
--#define KEY_PAUSE 119
--#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
--
--#define KEY_KPCOMMA 121
--#define KEY_HANGEUL 122
--#define KEY_HANGUEL KEY_HANGEUL
--#define KEY_HANJA 123
--#define KEY_YEN 124
--#define KEY_LEFTMETA 125
--#define KEY_RIGHTMETA 126
--#define KEY_COMPOSE 127
--
--#define KEY_STOP 128 /* AC Stop */
--#define KEY_AGAIN 129
--#define KEY_PROPS 130 /* AC Properties */
--#define KEY_UNDO 131 /* AC Undo */
--#define KEY_FRONT 132
--#define KEY_COPY 133 /* AC Copy */
--#define KEY_OPEN 134 /* AC Open */
--#define KEY_PASTE 135 /* AC Paste */
--#define KEY_FIND 136 /* AC Search */
--#define KEY_CUT 137 /* AC Cut */
--#define KEY_HELP 138 /* AL Integrated Help Center */
--#define KEY_MENU 139 /* Menu (show menu) */
--#define KEY_CALC 140 /* AL Calculator */
--#define KEY_SETUP 141
--#define KEY_SLEEP 142 /* SC System Sleep */
--#define KEY_WAKEUP 143 /* System Wake Up */
--#define KEY_FILE 144 /* AL Local Machine Browser */
--#define KEY_SENDFILE 145
--#define KEY_DELETEFILE 146
--#define KEY_XFER 147
--#define KEY_PROG1 148
--#define KEY_PROG2 149
--#define KEY_WWW 150 /* AL Internet Browser */
--#define KEY_MSDOS 151
--#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
--#define KEY_SCREENLOCK KEY_COFFEE
--#define KEY_DIRECTION 153
--#define KEY_CYCLEWINDOWS 154
--#define KEY_MAIL 155
--#define KEY_BOOKMARKS 156 /* AC Bookmarks */
--#define KEY_COMPUTER 157
--#define KEY_BACK 158 /* AC Back */
--#define KEY_FORWARD 159 /* AC Forward */
--#define KEY_CLOSECD 160
--#define KEY_EJECTCD 161
--#define KEY_EJECTCLOSECD 162
--#define KEY_NEXTSONG 163
--#define KEY_PLAYPAUSE 164
--#define KEY_PREVIOUSSONG 165
--#define KEY_STOPCD 166
--#define KEY_RECORD 167
--#define KEY_REWIND 168
--#define KEY_PHONE 169 /* Media Select Telephone */
--#define KEY_ISO 170
--#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
--#define KEY_HOMEPAGE 172 /* AC Home */
--#define KEY_REFRESH 173 /* AC Refresh */
--#define KEY_EXIT 174 /* AC Exit */
--#define KEY_MOVE 175
--#define KEY_EDIT 176
--#define KEY_SCROLLUP 177
--#define KEY_SCROLLDOWN 178
--#define KEY_KPLEFTPAREN 179
--#define KEY_KPRIGHTPAREN 180
--#define KEY_NEW 181 /* AC New */
--#define KEY_REDO 182 /* AC Redo/Repeat */
--
--#define KEY_F13 183
--#define KEY_F14 184
--#define KEY_F15 185
--#define KEY_F16 186
--#define KEY_F17 187
--#define KEY_F18 188
--#define KEY_F19 189
--#define KEY_F20 190
--#define KEY_F21 191
--#define KEY_F22 192
--#define KEY_F23 193
--#define KEY_F24 194
--
--#define KEY_PLAYCD 200
--#define KEY_PAUSECD 201
--#define KEY_PROG3 202
--#define KEY_PROG4 203
--#define KEY_DASHBOARD 204 /* AL Dashboard */
--#define KEY_SUSPEND 205
--#define KEY_CLOSE 206 /* AC Close */
--#define KEY_PLAY 207
--#define KEY_FASTFORWARD 208
--#define KEY_BASSBOOST 209
--#define KEY_PRINT 210 /* AC Print */
--#define KEY_HP 211
--#define KEY_CAMERA 212
--#define KEY_SOUND 213
--#define KEY_QUESTION 214
--#define KEY_EMAIL 215
--#define KEY_CHAT 216
--#define KEY_SEARCH 217
--#define KEY_CONNECT 218
--#define KEY_FINANCE 219 /* AL Checkbook/Finance */
--#define KEY_SPORT 220
--#define KEY_SHOP 221
--#define KEY_ALTERASE 222
--#define KEY_CANCEL 223 /* AC Cancel */
--#define KEY_BRIGHTNESSDOWN 224
--#define KEY_BRIGHTNESSUP 225
--#define KEY_MEDIA 226
--
--#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
-- outputs (Monitor/LCD/TV-out/etc) */
--#define KEY_KBDILLUMTOGGLE 228
--#define KEY_KBDILLUMDOWN 229
--#define KEY_KBDILLUMUP 230
--
--#define KEY_SEND 231 /* AC Send */
--#define KEY_REPLY 232 /* AC Reply */
--#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
--#define KEY_SAVE 234 /* AC Save */
--#define KEY_DOCUMENTS 235
--
--#define KEY_BATTERY 236
--
--#define KEY_BLUETOOTH 237
--#define KEY_WLAN 238
--#define KEY_UWB 239
--
--#define KEY_UNKNOWN 240
--
--#define KEY_VIDEO_NEXT 241 /* drive next video source */
--#define KEY_VIDEO_PREV 242 /* drive previous video source */
--#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
--#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */
--#define KEY_DISPLAY_OFF 245 /* display device to off state */
--
--#define KEY_WIMAX 246
--#define KEY_RFKILL 247 /* Key that controls all radios */
--
--#define KEY_MICMUTE 248 /* Mute / unmute the microphone */
--
--/* Code 255 is reserved for special needs of AT keyboard driver */
--
--#define BTN_MISC 0x100
--#define BTN_0 0x100
--#define BTN_1 0x101
--#define BTN_2 0x102
--#define BTN_3 0x103
--#define BTN_4 0x104
--#define BTN_5 0x105
--#define BTN_6 0x106
--#define BTN_7 0x107
--#define BTN_8 0x108
--#define BTN_9 0x109
--
--#define BTN_MOUSE 0x110
--#define BTN_LEFT 0x110
--#define BTN_RIGHT 0x111
--#define BTN_MIDDLE 0x112
--#define BTN_SIDE 0x113
--#define BTN_EXTRA 0x114
--#define BTN_FORWARD 0x115
--#define BTN_BACK 0x116
--#define BTN_TASK 0x117
--
--#define BTN_JOYSTICK 0x120
--#define BTN_TRIGGER 0x120
--#define BTN_THUMB 0x121
--#define BTN_THUMB2 0x122
--#define BTN_TOP 0x123
--#define BTN_TOP2 0x124
--#define BTN_PINKIE 0x125
--#define BTN_BASE 0x126
--#define BTN_BASE2 0x127
--#define BTN_BASE3 0x128
--#define BTN_BASE4 0x129
--#define BTN_BASE5 0x12a
--#define BTN_BASE6 0x12b
--#define BTN_DEAD 0x12f
--
--#define BTN_GAMEPAD 0x130
--#define BTN_SOUTH 0x130
--#define BTN_A BTN_SOUTH
--#define BTN_EAST 0x131
--#define BTN_B BTN_EAST
--#define BTN_C 0x132
--#define BTN_NORTH 0x133
--#define BTN_X BTN_NORTH
--#define BTN_WEST 0x134
--#define BTN_Y BTN_WEST
--#define BTN_Z 0x135
--#define BTN_TL 0x136
--#define BTN_TR 0x137
--#define BTN_TL2 0x138
--#define BTN_TR2 0x139
--#define BTN_SELECT 0x13a
--#define BTN_START 0x13b
--#define BTN_MODE 0x13c
--#define BTN_THUMBL 0x13d
--#define BTN_THUMBR 0x13e
--
--#define BTN_DIGI 0x140
--#define BTN_TOOL_PEN 0x140
--#define BTN_TOOL_RUBBER 0x141
--#define BTN_TOOL_BRUSH 0x142
--#define BTN_TOOL_PENCIL 0x143
--#define BTN_TOOL_AIRBRUSH 0x144
--#define BTN_TOOL_FINGER 0x145
--#define BTN_TOOL_MOUSE 0x146
--#define BTN_TOOL_LENS 0x147
--#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
--#define BTN_TOUCH 0x14a
--#define BTN_STYLUS 0x14b
--#define BTN_STYLUS2 0x14c
--#define BTN_TOOL_DOUBLETAP 0x14d
--#define BTN_TOOL_TRIPLETAP 0x14e
--#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
--
--#define BTN_WHEEL 0x150
--#define BTN_GEAR_DOWN 0x150
--#define BTN_GEAR_UP 0x151
--
--#define KEY_OK 0x160
--#define KEY_SELECT 0x161
--#define KEY_GOTO 0x162
--#define KEY_CLEAR 0x163
--#define KEY_POWER2 0x164
--#define KEY_OPTION 0x165
--#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
--#define KEY_TIME 0x167
--#define KEY_VENDOR 0x168
--#define KEY_ARCHIVE 0x169
--#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
--#define KEY_CHANNEL 0x16b
--#define KEY_FAVORITES 0x16c
--#define KEY_EPG 0x16d
--#define KEY_PVR 0x16e /* Media Select Home */
--#define KEY_MHP 0x16f
--#define KEY_LANGUAGE 0x170
--#define KEY_TITLE 0x171
--#define KEY_SUBTITLE 0x172
--#define KEY_ANGLE 0x173
--#define KEY_ZOOM 0x174
--#define KEY_MODE 0x175
--#define KEY_KEYBOARD 0x176
--#define KEY_SCREEN 0x177
--#define KEY_PC 0x178 /* Media Select Computer */
--#define KEY_TV 0x179 /* Media Select TV */
--#define KEY_TV2 0x17a /* Media Select Cable */
--#define KEY_VCR 0x17b /* Media Select VCR */
--#define KEY_VCR2 0x17c /* VCR Plus */
--#define KEY_SAT 0x17d /* Media Select Satellite */
--#define KEY_SAT2 0x17e
--#define KEY_CD 0x17f /* Media Select CD */
--#define KEY_TAPE 0x180 /* Media Select Tape */
--#define KEY_RADIO 0x181
--#define KEY_TUNER 0x182 /* Media Select Tuner */
--#define KEY_PLAYER 0x183
--#define KEY_TEXT 0x184
--#define KEY_DVD 0x185 /* Media Select DVD */
--#define KEY_AUX 0x186
--#define KEY_MP3 0x187
--#define KEY_AUDIO 0x188 /* AL Audio Browser */
--#define KEY_VIDEO 0x189 /* AL Movie Browser */
--#define KEY_DIRECTORY 0x18a
--#define KEY_LIST 0x18b
--#define KEY_MEMO 0x18c /* Media Select Messages */
--#define KEY_CALENDAR 0x18d
--#define KEY_RED 0x18e
--#define KEY_GREEN 0x18f
--#define KEY_YELLOW 0x190
--#define KEY_BLUE 0x191
--#define KEY_CHANNELUP 0x192 /* Channel Increment */
--#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
--#define KEY_FIRST 0x194
--#define KEY_LAST 0x195 /* Recall Last */
--#define KEY_AB 0x196
--#define KEY_NEXT 0x197
--#define KEY_RESTART 0x198
--#define KEY_SLOW 0x199
--#define KEY_SHUFFLE 0x19a
--#define KEY_BREAK 0x19b
--#define KEY_PREVIOUS 0x19c
--#define KEY_DIGITS 0x19d
--#define KEY_TEEN 0x19e
--#define KEY_TWEN 0x19f
--#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
--#define KEY_GAMES 0x1a1 /* Media Select Games */
--#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
--#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
--#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
--#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
--#define KEY_EDITOR 0x1a6 /* AL Text Editor */
--#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
--#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
--#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
--#define KEY_DATABASE 0x1aa /* AL Database App */
--#define KEY_NEWS 0x1ab /* AL Newsreader */
--#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
--#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
--#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
--#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
--#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
--#define KEY_LOGOFF 0x1b1 /* AL Logoff */
--
--#define KEY_DOLLAR 0x1b2
--#define KEY_EURO 0x1b3
--
--#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
--#define KEY_FRAMEFORWARD 0x1b5
--#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
--#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
--#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
--#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
--#define KEY_IMAGES 0x1ba /* AL Image Browser */
--
--#define KEY_DEL_EOL 0x1c0
--#define KEY_DEL_EOS 0x1c1
--#define KEY_INS_LINE 0x1c2
--#define KEY_DEL_LINE 0x1c3
--
--#define KEY_FN 0x1d0
--#define KEY_FN_ESC 0x1d1
--#define KEY_FN_F1 0x1d2
--#define KEY_FN_F2 0x1d3
--#define KEY_FN_F3 0x1d4
--#define KEY_FN_F4 0x1d5
--#define KEY_FN_F5 0x1d6
--#define KEY_FN_F6 0x1d7
--#define KEY_FN_F7 0x1d8
--#define KEY_FN_F8 0x1d9
--#define KEY_FN_F9 0x1da
--#define KEY_FN_F10 0x1db
--#define KEY_FN_F11 0x1dc
--#define KEY_FN_F12 0x1dd
--#define KEY_FN_1 0x1de
--#define KEY_FN_2 0x1df
--#define KEY_FN_D 0x1e0
--#define KEY_FN_E 0x1e1
--#define KEY_FN_F 0x1e2
--#define KEY_FN_S 0x1e3
--#define KEY_FN_B 0x1e4
--
--#define KEY_BRL_DOT1 0x1f1
--#define KEY_BRL_DOT2 0x1f2
--#define KEY_BRL_DOT3 0x1f3
--#define KEY_BRL_DOT4 0x1f4
--#define KEY_BRL_DOT5 0x1f5
--#define KEY_BRL_DOT6 0x1f6
--#define KEY_BRL_DOT7 0x1f7
--#define KEY_BRL_DOT8 0x1f8
--#define KEY_BRL_DOT9 0x1f9
--#define KEY_BRL_DOT10 0x1fa
--
--#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
--#define KEY_NUMERIC_1 0x201 /* and other keypads */
--#define KEY_NUMERIC_2 0x202
--#define KEY_NUMERIC_3 0x203
--#define KEY_NUMERIC_4 0x204
--#define KEY_NUMERIC_5 0x205
--#define KEY_NUMERIC_6 0x206
--#define KEY_NUMERIC_7 0x207
--#define KEY_NUMERIC_8 0x208
--#define KEY_NUMERIC_9 0x209
--#define KEY_NUMERIC_STAR 0x20a
--#define KEY_NUMERIC_POUND 0x20b
--
--#define KEY_CAMERA_FOCUS 0x210
--#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
--
--#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
--#define KEY_TOUCHPAD_ON 0x213
--#define KEY_TOUCHPAD_OFF 0x214
--
--#define KEY_CAMERA_ZOOMIN 0x215
--#define KEY_CAMERA_ZOOMOUT 0x216
--#define KEY_CAMERA_UP 0x217
--#define KEY_CAMERA_DOWN 0x218
--#define KEY_CAMERA_LEFT 0x219
--#define KEY_CAMERA_RIGHT 0x21a
--
--#define KEY_ATTENDANT_ON 0x21b
--#define KEY_ATTENDANT_OFF 0x21c
--#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */
--#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */
--
--#define BTN_DPAD_UP 0x220
--#define BTN_DPAD_DOWN 0x221
--#define BTN_DPAD_LEFT 0x222
--#define BTN_DPAD_RIGHT 0x223
-+#include "linux-event-codes.h"
-
- #define MATRIX_KEY(row, col, code) \
- ((((row) & 0xFF) << 24) | (((col) & 0xFF) << 16) | ((code) & 0xFFFF))
---- /dev/null
-+++ b/include/dt-bindings/input/linux-event-codes.h
-@@ -0,0 +1,805 @@
-+/*
-+ * Input event codes
-+ *
-+ * *** IMPORTANT ***
-+ * This file is not only included from C-code but also from devicetree source
-+ * files. As such this file MUST only contain comments and defines.
-+ *
-+ * Copyright (c) 1999-2002 Vojtech Pavlik
-+ * Copyright (c) 2015 Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ */
-+#ifndef _UAPI_INPUT_EVENT_CODES_H
-+#define _UAPI_INPUT_EVENT_CODES_H
-+
-+/*
-+ * Device properties and quirks
-+ */
-+
-+#define INPUT_PROP_POINTER 0x00 /* needs a pointer */
-+#define INPUT_PROP_DIRECT 0x01 /* direct input devices */
-+#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */
-+#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */
-+#define INPUT_PROP_TOPBUTTONPAD 0x04 /* softbuttons at top of pad */
-+#define INPUT_PROP_POINTING_STICK 0x05 /* is a pointing stick */
-+#define INPUT_PROP_ACCELEROMETER 0x06 /* has accelerometer */
-+
-+#define INPUT_PROP_MAX 0x1f
-+#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1)
-+
-+/*
-+ * Event types
-+ */
-+
-+#define EV_SYN 0x00
-+#define EV_KEY 0x01
-+#define EV_REL 0x02
-+#define EV_ABS 0x03
-+#define EV_MSC 0x04
-+#define EV_SW 0x05
-+#define EV_LED 0x11
-+#define EV_SND 0x12
-+#define EV_REP 0x14
-+#define EV_FF 0x15
-+#define EV_PWR 0x16
-+#define EV_FF_STATUS 0x17
-+#define EV_MAX 0x1f
-+#define EV_CNT (EV_MAX+1)
-+
-+/*
-+ * Synchronization events.
-+ */
-+
-+#define SYN_REPORT 0
-+#define SYN_CONFIG 1
-+#define SYN_MT_REPORT 2
-+#define SYN_DROPPED 3
-+#define SYN_MAX 0xf
-+#define SYN_CNT (SYN_MAX+1)
-+
-+/*
-+ * Keys and buttons
-+ *
-+ * Most of the keys/buttons are modeled after USB HUT 1.12
-+ * (see http://www.usb.org/developers/hidpage).
-+ * Abbreviations in the comments:
-+ * AC - Application Control
-+ * AL - Application Launch Button
-+ * SC - System Control
-+ */
-+
-+#define KEY_RESERVED 0
-+#define KEY_ESC 1
-+#define KEY_1 2
-+#define KEY_2 3
-+#define KEY_3 4
-+#define KEY_4 5
-+#define KEY_5 6
-+#define KEY_6 7
-+#define KEY_7 8
-+#define KEY_8 9
-+#define KEY_9 10
-+#define KEY_0 11
-+#define KEY_MINUS 12
-+#define KEY_EQUAL 13
-+#define KEY_BACKSPACE 14
-+#define KEY_TAB 15
-+#define KEY_Q 16
-+#define KEY_W 17
-+#define KEY_E 18
-+#define KEY_R 19
-+#define KEY_T 20
-+#define KEY_Y 21
-+#define KEY_U 22
-+#define KEY_I 23
-+#define KEY_O 24
-+#define KEY_P 25
-+#define KEY_LEFTBRACE 26
-+#define KEY_RIGHTBRACE 27
-+#define KEY_ENTER 28
-+#define KEY_LEFTCTRL 29
-+#define KEY_A 30
-+#define KEY_S 31
-+#define KEY_D 32
-+#define KEY_F 33
-+#define KEY_G 34
-+#define KEY_H 35
-+#define KEY_J 36
-+#define KEY_K 37
-+#define KEY_L 38
-+#define KEY_SEMICOLON 39
-+#define KEY_APOSTROPHE 40
-+#define KEY_GRAVE 41
-+#define KEY_LEFTSHIFT 42
-+#define KEY_BACKSLASH 43
-+#define KEY_Z 44
-+#define KEY_X 45
-+#define KEY_C 46
-+#define KEY_V 47
-+#define KEY_B 48
-+#define KEY_N 49
-+#define KEY_M 50
-+#define KEY_COMMA 51
-+#define KEY_DOT 52
-+#define KEY_SLASH 53
-+#define KEY_RIGHTSHIFT 54
-+#define KEY_KPASTERISK 55
-+#define KEY_LEFTALT 56
-+#define KEY_SPACE 57
-+#define KEY_CAPSLOCK 58
-+#define KEY_F1 59
-+#define KEY_F2 60
-+#define KEY_F3 61
-+#define KEY_F4 62
-+#define KEY_F5 63
-+#define KEY_F6 64
-+#define KEY_F7 65
-+#define KEY_F8 66
-+#define KEY_F9 67
-+#define KEY_F10 68
-+#define KEY_NUMLOCK 69
-+#define KEY_SCROLLLOCK 70
-+#define KEY_KP7 71
-+#define KEY_KP8 72
-+#define KEY_KP9 73
-+#define KEY_KPMINUS 74
-+#define KEY_KP4 75
-+#define KEY_KP5 76
-+#define KEY_KP6 77
-+#define KEY_KPPLUS 78
-+#define KEY_KP1 79
-+#define KEY_KP2 80
-+#define KEY_KP3 81
-+#define KEY_KP0 82
-+#define KEY_KPDOT 83
-+
-+#define KEY_ZENKAKUHANKAKU 85
-+#define KEY_102ND 86
-+#define KEY_F11 87
-+#define KEY_F12 88
-+#define KEY_RO 89
-+#define KEY_KATAKANA 90
-+#define KEY_HIRAGANA 91
-+#define KEY_HENKAN 92
-+#define KEY_KATAKANAHIRAGANA 93
-+#define KEY_MUHENKAN 94
-+#define KEY_KPJPCOMMA 95
-+#define KEY_KPENTER 96
-+#define KEY_RIGHTCTRL 97
-+#define KEY_KPSLASH 98
-+#define KEY_SYSRQ 99
-+#define KEY_RIGHTALT 100
-+#define KEY_LINEFEED 101
-+#define KEY_HOME 102
-+#define KEY_UP 103
-+#define KEY_PAGEUP 104
-+#define KEY_LEFT 105
-+#define KEY_RIGHT 106
-+#define KEY_END 107
-+#define KEY_DOWN 108
-+#define KEY_PAGEDOWN 109
-+#define KEY_INSERT 110
-+#define KEY_DELETE 111
-+#define KEY_MACRO 112
-+#define KEY_MUTE 113
-+#define KEY_VOLUMEDOWN 114
-+#define KEY_VOLUMEUP 115
-+#define KEY_POWER 116 /* SC System Power Down */
-+#define KEY_KPEQUAL 117
-+#define KEY_KPPLUSMINUS 118
-+#define KEY_PAUSE 119
-+#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
-+
-+#define KEY_KPCOMMA 121
-+#define KEY_HANGEUL 122
-+#define KEY_HANGUEL KEY_HANGEUL
-+#define KEY_HANJA 123
-+#define KEY_YEN 124
-+#define KEY_LEFTMETA 125
-+#define KEY_RIGHTMETA 126
-+#define KEY_COMPOSE 127
-+
-+#define KEY_STOP 128 /* AC Stop */
-+#define KEY_AGAIN 129
-+#define KEY_PROPS 130 /* AC Properties */
-+#define KEY_UNDO 131 /* AC Undo */
-+#define KEY_FRONT 132
-+#define KEY_COPY 133 /* AC Copy */
-+#define KEY_OPEN 134 /* AC Open */
-+#define KEY_PASTE 135 /* AC Paste */
-+#define KEY_FIND 136 /* AC Search */
-+#define KEY_CUT 137 /* AC Cut */
-+#define KEY_HELP 138 /* AL Integrated Help Center */
-+#define KEY_MENU 139 /* Menu (show menu) */
-+#define KEY_CALC 140 /* AL Calculator */
-+#define KEY_SETUP 141
-+#define KEY_SLEEP 142 /* SC System Sleep */
-+#define KEY_WAKEUP 143 /* System Wake Up */
-+#define KEY_FILE 144 /* AL Local Machine Browser */
-+#define KEY_SENDFILE 145
-+#define KEY_DELETEFILE 146
-+#define KEY_XFER 147
-+#define KEY_PROG1 148
-+#define KEY_PROG2 149
-+#define KEY_WWW 150 /* AL Internet Browser */
-+#define KEY_MSDOS 151
-+#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
-+#define KEY_SCREENLOCK KEY_COFFEE
-+#define KEY_ROTATE_DISPLAY 153 /* Display orientation for e.g. tablets */
-+#define KEY_DIRECTION KEY_ROTATE_DISPLAY
-+#define KEY_CYCLEWINDOWS 154
-+#define KEY_MAIL 155
-+#define KEY_BOOKMARKS 156 /* AC Bookmarks */
-+#define KEY_COMPUTER 157
-+#define KEY_BACK 158 /* AC Back */
-+#define KEY_FORWARD 159 /* AC Forward */
-+#define KEY_CLOSECD 160
-+#define KEY_EJECTCD 161
-+#define KEY_EJECTCLOSECD 162
-+#define KEY_NEXTSONG 163
-+#define KEY_PLAYPAUSE 164
-+#define KEY_PREVIOUSSONG 165
-+#define KEY_STOPCD 166
-+#define KEY_RECORD 167
-+#define KEY_REWIND 168
-+#define KEY_PHONE 169 /* Media Select Telephone */
-+#define KEY_ISO 170
-+#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
-+#define KEY_HOMEPAGE 172 /* AC Home */
-+#define KEY_REFRESH 173 /* AC Refresh */
-+#define KEY_EXIT 174 /* AC Exit */
-+#define KEY_MOVE 175
-+#define KEY_EDIT 176
-+#define KEY_SCROLLUP 177
-+#define KEY_SCROLLDOWN 178
-+#define KEY_KPLEFTPAREN 179
-+#define KEY_KPRIGHTPAREN 180
-+#define KEY_NEW 181 /* AC New */
-+#define KEY_REDO 182 /* AC Redo/Repeat */
-+
-+#define KEY_F13 183
-+#define KEY_F14 184
-+#define KEY_F15 185
-+#define KEY_F16 186
-+#define KEY_F17 187
-+#define KEY_F18 188
-+#define KEY_F19 189
-+#define KEY_F20 190
-+#define KEY_F21 191
-+#define KEY_F22 192
-+#define KEY_F23 193
-+#define KEY_F24 194
-+
-+#define KEY_PLAYCD 200
-+#define KEY_PAUSECD 201
-+#define KEY_PROG3 202
-+#define KEY_PROG4 203
-+#define KEY_DASHBOARD 204 /* AL Dashboard */
-+#define KEY_SUSPEND 205
-+#define KEY_CLOSE 206 /* AC Close */
-+#define KEY_PLAY 207
-+#define KEY_FASTFORWARD 208
-+#define KEY_BASSBOOST 209
-+#define KEY_PRINT 210 /* AC Print */
-+#define KEY_HP 211
-+#define KEY_CAMERA 212
-+#define KEY_SOUND 213
-+#define KEY_QUESTION 214
-+#define KEY_EMAIL 215
-+#define KEY_CHAT 216
-+#define KEY_SEARCH 217
-+#define KEY_CONNECT 218
-+#define KEY_FINANCE 219 /* AL Checkbook/Finance */
-+#define KEY_SPORT 220
-+#define KEY_SHOP 221
-+#define KEY_ALTERASE 222
-+#define KEY_CANCEL 223 /* AC Cancel */
-+#define KEY_BRIGHTNESSDOWN 224
-+#define KEY_BRIGHTNESSUP 225
-+#define KEY_MEDIA 226
-+
-+#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
-+ outputs (Monitor/LCD/TV-out/etc) */
-+#define KEY_KBDILLUMTOGGLE 228
-+#define KEY_KBDILLUMDOWN 229
-+#define KEY_KBDILLUMUP 230
-+
-+#define KEY_SEND 231 /* AC Send */
-+#define KEY_REPLY 232 /* AC Reply */
-+#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
-+#define KEY_SAVE 234 /* AC Save */
-+#define KEY_DOCUMENTS 235
-+
-+#define KEY_BATTERY 236
-+
-+#define KEY_BLUETOOTH 237
-+#define KEY_WLAN 238
-+#define KEY_UWB 239
-+
-+#define KEY_UNKNOWN 240
-+
-+#define KEY_VIDEO_NEXT 241 /* drive next video source */
-+#define KEY_VIDEO_PREV 242 /* drive previous video source */
-+#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
-+#define KEY_BRIGHTNESS_AUTO 244 /* Set Auto Brightness: manual
-+ brightness control is off,
-+ rely on ambient */
-+#define KEY_BRIGHTNESS_ZERO KEY_BRIGHTNESS_AUTO
-+#define KEY_DISPLAY_OFF 245 /* display device to off state */
-+
-+#define KEY_WWAN 246 /* Wireless WAN (LTE, UMTS, GSM, etc.) */
-+#define KEY_WIMAX KEY_WWAN
-+#define KEY_RFKILL 247 /* Key that controls all radios */
-+
-+#define KEY_MICMUTE 248 /* Mute / unmute the microphone */
-+
-+/* Code 255 is reserved for special needs of AT keyboard driver */
-+
-+#define BTN_MISC 0x100
-+#define BTN_0 0x100
-+#define BTN_1 0x101
-+#define BTN_2 0x102
-+#define BTN_3 0x103
-+#define BTN_4 0x104
-+#define BTN_5 0x105
-+#define BTN_6 0x106
-+#define BTN_7 0x107
-+#define BTN_8 0x108
-+#define BTN_9 0x109
-+
-+#define BTN_MOUSE 0x110
-+#define BTN_LEFT 0x110
-+#define BTN_RIGHT 0x111
-+#define BTN_MIDDLE 0x112
-+#define BTN_SIDE 0x113
-+#define BTN_EXTRA 0x114
-+#define BTN_FORWARD 0x115
-+#define BTN_BACK 0x116
-+#define BTN_TASK 0x117
-+
-+#define BTN_JOYSTICK 0x120
-+#define BTN_TRIGGER 0x120
-+#define BTN_THUMB 0x121
-+#define BTN_THUMB2 0x122
-+#define BTN_TOP 0x123
-+#define BTN_TOP2 0x124
-+#define BTN_PINKIE 0x125
-+#define BTN_BASE 0x126
-+#define BTN_BASE2 0x127
-+#define BTN_BASE3 0x128
-+#define BTN_BASE4 0x129
-+#define BTN_BASE5 0x12a
-+#define BTN_BASE6 0x12b
-+#define BTN_DEAD 0x12f
-+
-+#define BTN_GAMEPAD 0x130
-+#define BTN_SOUTH 0x130
-+#define BTN_A BTN_SOUTH
-+#define BTN_EAST 0x131
-+#define BTN_B BTN_EAST
-+#define BTN_C 0x132
-+#define BTN_NORTH 0x133
-+#define BTN_X BTN_NORTH
-+#define BTN_WEST 0x134
-+#define BTN_Y BTN_WEST
-+#define BTN_Z 0x135
-+#define BTN_TL 0x136
-+#define BTN_TR 0x137
-+#define BTN_TL2 0x138
-+#define BTN_TR2 0x139
-+#define BTN_SELECT 0x13a
-+#define BTN_START 0x13b
-+#define BTN_MODE 0x13c
-+#define BTN_THUMBL 0x13d
-+#define BTN_THUMBR 0x13e
-+
-+#define BTN_DIGI 0x140
-+#define BTN_TOOL_PEN 0x140
-+#define BTN_TOOL_RUBBER 0x141
-+#define BTN_TOOL_BRUSH 0x142
-+#define BTN_TOOL_PENCIL 0x143
-+#define BTN_TOOL_AIRBRUSH 0x144
-+#define BTN_TOOL_FINGER 0x145
-+#define BTN_TOOL_MOUSE 0x146
-+#define BTN_TOOL_LENS 0x147
-+#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
-+#define BTN_TOUCH 0x14a
-+#define BTN_STYLUS 0x14b
-+#define BTN_STYLUS2 0x14c
-+#define BTN_TOOL_DOUBLETAP 0x14d
-+#define BTN_TOOL_TRIPLETAP 0x14e
-+#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
-+
-+#define BTN_WHEEL 0x150
-+#define BTN_GEAR_DOWN 0x150
-+#define BTN_GEAR_UP 0x151
-+
-+#define KEY_OK 0x160
-+#define KEY_SELECT 0x161
-+#define KEY_GOTO 0x162
-+#define KEY_CLEAR 0x163
-+#define KEY_POWER2 0x164
-+#define KEY_OPTION 0x165
-+#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
-+#define KEY_TIME 0x167
-+#define KEY_VENDOR 0x168
-+#define KEY_ARCHIVE 0x169
-+#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
-+#define KEY_CHANNEL 0x16b
-+#define KEY_FAVORITES 0x16c
-+#define KEY_EPG 0x16d
-+#define KEY_PVR 0x16e /* Media Select Home */
-+#define KEY_MHP 0x16f
-+#define KEY_LANGUAGE 0x170
-+#define KEY_TITLE 0x171
-+#define KEY_SUBTITLE 0x172
-+#define KEY_ANGLE 0x173
-+#define KEY_ZOOM 0x174
-+#define KEY_MODE 0x175
-+#define KEY_KEYBOARD 0x176
-+#define KEY_SCREEN 0x177
-+#define KEY_PC 0x178 /* Media Select Computer */
-+#define KEY_TV 0x179 /* Media Select TV */
-+#define KEY_TV2 0x17a /* Media Select Cable */
-+#define KEY_VCR 0x17b /* Media Select VCR */
-+#define KEY_VCR2 0x17c /* VCR Plus */
-+#define KEY_SAT 0x17d /* Media Select Satellite */
-+#define KEY_SAT2 0x17e
-+#define KEY_CD 0x17f /* Media Select CD */
-+#define KEY_TAPE 0x180 /* Media Select Tape */
-+#define KEY_RADIO 0x181
-+#define KEY_TUNER 0x182 /* Media Select Tuner */
-+#define KEY_PLAYER 0x183
-+#define KEY_TEXT 0x184
-+#define KEY_DVD 0x185 /* Media Select DVD */
-+#define KEY_AUX 0x186
-+#define KEY_MP3 0x187
-+#define KEY_AUDIO 0x188 /* AL Audio Browser */
-+#define KEY_VIDEO 0x189 /* AL Movie Browser */
-+#define KEY_DIRECTORY 0x18a
-+#define KEY_LIST 0x18b
-+#define KEY_MEMO 0x18c /* Media Select Messages */
-+#define KEY_CALENDAR 0x18d
-+#define KEY_RED 0x18e
-+#define KEY_GREEN 0x18f
-+#define KEY_YELLOW 0x190
-+#define KEY_BLUE 0x191
-+#define KEY_CHANNELUP 0x192 /* Channel Increment */
-+#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
-+#define KEY_FIRST 0x194
-+#define KEY_LAST 0x195 /* Recall Last */
-+#define KEY_AB 0x196
-+#define KEY_NEXT 0x197
-+#define KEY_RESTART 0x198
-+#define KEY_SLOW 0x199
-+#define KEY_SHUFFLE 0x19a
-+#define KEY_BREAK 0x19b
-+#define KEY_PREVIOUS 0x19c
-+#define KEY_DIGITS 0x19d
-+#define KEY_TEEN 0x19e
-+#define KEY_TWEN 0x19f
-+#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
-+#define KEY_GAMES 0x1a1 /* Media Select Games */
-+#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
-+#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
-+#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
-+#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
-+#define KEY_EDITOR 0x1a6 /* AL Text Editor */
-+#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
-+#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
-+#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
-+#define KEY_DATABASE 0x1aa /* AL Database App */
-+#define KEY_NEWS 0x1ab /* AL Newsreader */
-+#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
-+#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
-+#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
-+#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
-+#define KEY_BRIGHTNESS_TOGGLE KEY_DISPLAYTOGGLE
-+#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
-+#define KEY_LOGOFF 0x1b1 /* AL Logoff */
-+
-+#define KEY_DOLLAR 0x1b2
-+#define KEY_EURO 0x1b3
-+
-+#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
-+#define KEY_FRAMEFORWARD 0x1b5
-+#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
-+#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
-+#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
-+#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
-+#define KEY_IMAGES 0x1ba /* AL Image Browser */
-+
-+#define KEY_DEL_EOL 0x1c0
-+#define KEY_DEL_EOS 0x1c1
-+#define KEY_INS_LINE 0x1c2
-+#define KEY_DEL_LINE 0x1c3
-+
-+#define KEY_FN 0x1d0
-+#define KEY_FN_ESC 0x1d1
-+#define KEY_FN_F1 0x1d2
-+#define KEY_FN_F2 0x1d3
-+#define KEY_FN_F3 0x1d4
-+#define KEY_FN_F4 0x1d5
-+#define KEY_FN_F5 0x1d6
-+#define KEY_FN_F6 0x1d7
-+#define KEY_FN_F7 0x1d8
-+#define KEY_FN_F8 0x1d9
-+#define KEY_FN_F9 0x1da
-+#define KEY_FN_F10 0x1db
-+#define KEY_FN_F11 0x1dc
-+#define KEY_FN_F12 0x1dd
-+#define KEY_FN_1 0x1de
-+#define KEY_FN_2 0x1df
-+#define KEY_FN_D 0x1e0
-+#define KEY_FN_E 0x1e1
-+#define KEY_FN_F 0x1e2
-+#define KEY_FN_S 0x1e3
-+#define KEY_FN_B 0x1e4
-+
-+#define KEY_BRL_DOT1 0x1f1
-+#define KEY_BRL_DOT2 0x1f2
-+#define KEY_BRL_DOT3 0x1f3
-+#define KEY_BRL_DOT4 0x1f4
-+#define KEY_BRL_DOT5 0x1f5
-+#define KEY_BRL_DOT6 0x1f6
-+#define KEY_BRL_DOT7 0x1f7
-+#define KEY_BRL_DOT8 0x1f8
-+#define KEY_BRL_DOT9 0x1f9
-+#define KEY_BRL_DOT10 0x1fa
-+
-+#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
-+#define KEY_NUMERIC_1 0x201 /* and other keypads */
-+#define KEY_NUMERIC_2 0x202
-+#define KEY_NUMERIC_3 0x203
-+#define KEY_NUMERIC_4 0x204
-+#define KEY_NUMERIC_5 0x205
-+#define KEY_NUMERIC_6 0x206
-+#define KEY_NUMERIC_7 0x207
-+#define KEY_NUMERIC_8 0x208
-+#define KEY_NUMERIC_9 0x209
-+#define KEY_NUMERIC_STAR 0x20a
-+#define KEY_NUMERIC_POUND 0x20b
-+#define KEY_NUMERIC_A 0x20c /* Phone key A - HUT Telephony 0xb9 */
-+#define KEY_NUMERIC_B 0x20d
-+#define KEY_NUMERIC_C 0x20e
-+#define KEY_NUMERIC_D 0x20f
-+
-+#define KEY_CAMERA_FOCUS 0x210
-+#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
-+
-+#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
-+#define KEY_TOUCHPAD_ON 0x213
-+#define KEY_TOUCHPAD_OFF 0x214
-+
-+#define KEY_CAMERA_ZOOMIN 0x215
-+#define KEY_CAMERA_ZOOMOUT 0x216
-+#define KEY_CAMERA_UP 0x217
-+#define KEY_CAMERA_DOWN 0x218
-+#define KEY_CAMERA_LEFT 0x219
-+#define KEY_CAMERA_RIGHT 0x21a
-+
-+#define KEY_ATTENDANT_ON 0x21b
-+#define KEY_ATTENDANT_OFF 0x21c
-+#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */
-+#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */
-+
-+#define BTN_DPAD_UP 0x220
-+#define BTN_DPAD_DOWN 0x221
-+#define BTN_DPAD_LEFT 0x222
-+#define BTN_DPAD_RIGHT 0x223
-+
-+#define KEY_ALS_TOGGLE 0x230 /* Ambient light sensor */
-+
-+#define KEY_BUTTONCONFIG 0x240 /* AL Button Configuration */
-+#define KEY_TASKMANAGER 0x241 /* AL Task/Project Manager */
-+#define KEY_JOURNAL 0x242 /* AL Log/Journal/Timecard */
-+#define KEY_CONTROLPANEL 0x243 /* AL Control Panel */
-+#define KEY_APPSELECT 0x244 /* AL Select Task/Application */
-+#define KEY_SCREENSAVER 0x245 /* AL Screen Saver */
-+#define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */
-+
-+#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
-+#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
-+
-+#define KEY_KBDINPUTASSIST_PREV 0x260
-+#define KEY_KBDINPUTASSIST_NEXT 0x261
-+#define KEY_KBDINPUTASSIST_PREVGROUP 0x262
-+#define KEY_KBDINPUTASSIST_NEXTGROUP 0x263
-+#define KEY_KBDINPUTASSIST_ACCEPT 0x264
-+#define KEY_KBDINPUTASSIST_CANCEL 0x265
-+
-+#define BTN_TRIGGER_HAPPY 0x2c0
-+#define BTN_TRIGGER_HAPPY1 0x2c0
-+#define BTN_TRIGGER_HAPPY2 0x2c1
-+#define BTN_TRIGGER_HAPPY3 0x2c2
-+#define BTN_TRIGGER_HAPPY4 0x2c3
-+#define BTN_TRIGGER_HAPPY5 0x2c4
-+#define BTN_TRIGGER_HAPPY6 0x2c5
-+#define BTN_TRIGGER_HAPPY7 0x2c6
-+#define BTN_TRIGGER_HAPPY8 0x2c7
-+#define BTN_TRIGGER_HAPPY9 0x2c8
-+#define BTN_TRIGGER_HAPPY10 0x2c9
-+#define BTN_TRIGGER_HAPPY11 0x2ca
-+#define BTN_TRIGGER_HAPPY12 0x2cb
-+#define BTN_TRIGGER_HAPPY13 0x2cc
-+#define BTN_TRIGGER_HAPPY14 0x2cd
-+#define BTN_TRIGGER_HAPPY15 0x2ce
-+#define BTN_TRIGGER_HAPPY16 0x2cf
-+#define BTN_TRIGGER_HAPPY17 0x2d0
-+#define BTN_TRIGGER_HAPPY18 0x2d1
-+#define BTN_TRIGGER_HAPPY19 0x2d2
-+#define BTN_TRIGGER_HAPPY20 0x2d3
-+#define BTN_TRIGGER_HAPPY21 0x2d4
-+#define BTN_TRIGGER_HAPPY22 0x2d5
-+#define BTN_TRIGGER_HAPPY23 0x2d6
-+#define BTN_TRIGGER_HAPPY24 0x2d7
-+#define BTN_TRIGGER_HAPPY25 0x2d8
-+#define BTN_TRIGGER_HAPPY26 0x2d9
-+#define BTN_TRIGGER_HAPPY27 0x2da
-+#define BTN_TRIGGER_HAPPY28 0x2db
-+#define BTN_TRIGGER_HAPPY29 0x2dc
-+#define BTN_TRIGGER_HAPPY30 0x2dd
-+#define BTN_TRIGGER_HAPPY31 0x2de
-+#define BTN_TRIGGER_HAPPY32 0x2df
-+#define BTN_TRIGGER_HAPPY33 0x2e0
-+#define BTN_TRIGGER_HAPPY34 0x2e1
-+#define BTN_TRIGGER_HAPPY35 0x2e2
-+#define BTN_TRIGGER_HAPPY36 0x2e3
-+#define BTN_TRIGGER_HAPPY37 0x2e4
-+#define BTN_TRIGGER_HAPPY38 0x2e5
-+#define BTN_TRIGGER_HAPPY39 0x2e6
-+#define BTN_TRIGGER_HAPPY40 0x2e7
-+
-+/* We avoid low common keys in module aliases so they don't get huge. */
-+#define KEY_MIN_INTERESTING KEY_MUTE
-+#define KEY_MAX 0x2ff
-+#define KEY_CNT (KEY_MAX+1)
-+
-+/*
-+ * Relative axes
-+ */
-+
-+#define REL_X 0x00
-+#define REL_Y 0x01
-+#define REL_Z 0x02
-+#define REL_RX 0x03
-+#define REL_RY 0x04
-+#define REL_RZ 0x05
-+#define REL_HWHEEL 0x06
-+#define REL_DIAL 0x07
-+#define REL_WHEEL 0x08
-+#define REL_MISC 0x09
-+#define REL_MAX 0x0f
-+#define REL_CNT (REL_MAX+1)
-+
-+/*
-+ * Absolute axes
-+ */
-+
-+#define ABS_X 0x00
-+#define ABS_Y 0x01
-+#define ABS_Z 0x02
-+#define ABS_RX 0x03
-+#define ABS_RY 0x04
-+#define ABS_RZ 0x05
-+#define ABS_THROTTLE 0x06
-+#define ABS_RUDDER 0x07
-+#define ABS_WHEEL 0x08
-+#define ABS_GAS 0x09
-+#define ABS_BRAKE 0x0a
-+#define ABS_HAT0X 0x10
-+#define ABS_HAT0Y 0x11
-+#define ABS_HAT1X 0x12
-+#define ABS_HAT1Y 0x13
-+#define ABS_HAT2X 0x14
-+#define ABS_HAT2Y 0x15
-+#define ABS_HAT3X 0x16
-+#define ABS_HAT3Y 0x17
-+#define ABS_PRESSURE 0x18
-+#define ABS_DISTANCE 0x19
-+#define ABS_TILT_X 0x1a
-+#define ABS_TILT_Y 0x1b
-+#define ABS_TOOL_WIDTH 0x1c
-+
-+#define ABS_VOLUME 0x20
-+
-+#define ABS_MISC 0x28
-+
-+#define ABS_MT_SLOT 0x2f /* MT slot being modified */
-+#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
-+#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
-+#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
-+#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
-+#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
-+#define ABS_MT_POSITION_X 0x35 /* Center X touch position */
-+#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */
-+#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
-+#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
-+#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
-+#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */
-+#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */
-+#define ABS_MT_TOOL_X 0x3c /* Center X tool position */
-+#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */
-+
-+
-+#define ABS_MAX 0x3f
-+#define ABS_CNT (ABS_MAX+1)
-+
-+/*
-+ * Switch events
-+ */
-+
-+#define SW_LID 0x00 /* set = lid shut */
-+#define SW_TABLET_MODE 0x01 /* set = tablet mode */
-+#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
-+#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any"
-+ set = radio enabled */
-+#define SW_RADIO SW_RFKILL_ALL /* deprecated */
-+#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */
-+#define SW_DOCK 0x05 /* set = plugged into dock */
-+#define SW_LINEOUT_INSERT 0x06 /* set = inserted */
-+#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */
-+#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */
-+#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */
-+#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */
-+#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */
-+#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */
-+#define SW_LINEIN_INSERT 0x0d /* set = inserted */
-+#define SW_MUTE_DEVICE 0x0e /* set = device disabled */
-+#define SW_MAX 0x0f
-+#define SW_CNT (SW_MAX+1)
-+
-+/*
-+ * Misc events
-+ */
-+
-+#define MSC_SERIAL 0x00
-+#define MSC_PULSELED 0x01
-+#define MSC_GESTURE 0x02
-+#define MSC_RAW 0x03
-+#define MSC_SCAN 0x04
-+#define MSC_TIMESTAMP 0x05
-+#define MSC_MAX 0x07
-+#define MSC_CNT (MSC_MAX+1)
-+
-+/*
-+ * LEDs
-+ */
-+
-+#define LED_NUML 0x00
-+#define LED_CAPSL 0x01
-+#define LED_SCROLLL 0x02
-+#define LED_COMPOSE 0x03
-+#define LED_KANA 0x04
-+#define LED_SLEEP 0x05
-+#define LED_SUSPEND 0x06
-+#define LED_MUTE 0x07
-+#define LED_MISC 0x08
-+#define LED_MAIL 0x09
-+#define LED_CHARGING 0x0a
-+#define LED_MAX 0x0f
-+#define LED_CNT (LED_MAX+1)
-+
-+/*
-+ * Autorepeat values
-+ */
-+
-+#define REP_DELAY 0x00
-+#define REP_PERIOD 0x01
-+#define REP_MAX 0x01
-+#define REP_CNT (REP_MAX+1)
-+
-+/*
-+ * Sounds
-+ */
-+
-+#define SND_CLICK 0x00
-+#define SND_BELL 0x01
-+#define SND_TONE 0x02
-+#define SND_MAX 0x07
-+#define SND_CNT (SND_MAX+1)
-+
-+#endif
deleted file mode 100644
@@ -1,7211 +0,0 @@
-From 80e5f83c0fc4bf42110cc55ce671ad7ddc7b08a4 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Mon, 14 Mar 2016 17:37:09 +0100
-Subject: [PATCH] sunxi: Sync dts files with the upstream kernel
-
-Sync dts files with the upstream kernel including
-changes queued for 4.6:
-
-https://git.kernel.org/cgit/linux/kernel/git/mripard/linux.git/commit/?h=sunxi/dt-for-4.6
-
-Note this adds a number of new unused board dts files. I've asked the
-authors of the kernel commits adding these to submit a matching defconfig
-to u-boot.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Ian Campbell <ijc@hellion.org.uk>
----
- arch/arm/dts/Makefile | 8 +-
- arch/arm/dts/axp22x.dtsi | 145 ++++++++++++
- arch/arm/dts/sun4i-a10-a1000.dts | 4 +
- arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts | 22 ++
- arch/arm/dts/sun4i-a10-cubieboard.dts | 4 +
- arch/arm/dts/sun4i-a10-gemei-g9.dts | 63 +++++-
- arch/arm/dts/sun4i-a10-inet1.dts | 48 ++++
- arch/arm/dts/sun4i-a10-inet97fv2.dts | 127 ++++++++++-
- arch/arm/dts/sun4i-a10-inet9f-rev03.dts | 181 +++++++++++++++
- arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts | 86 +------
- arch/arm/dts/sun4i-a10-jesurun-q5.dts | 15 ++
- arch/arm/dts/sun4i-a10-marsboard.dts | 23 ++
- arch/arm/dts/sun4i-a10-mk802.dts | 37 +++
- arch/arm/dts/sun4i-a10-olinuxino-lime.dts | 12 +
- arch/arm/dts/sun4i-a10-pcduino.dts | 58 ++++-
- arch/arm/dts/sun4i-a10-pcduino2.dts | 78 +++++++
- arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts | 69 ++++++
- arch/arm/dts/sun4i-a10.dtsi | 153 +++++++++++--
- arch/arm/dts/sun5i-a10s-auxtek-t004.dts | 14 ++
- arch/arm/dts/sun5i-a10s-olinuxino-micro.dts | 2 +-
- arch/arm/dts/sun5i-a13-empire-electronix-d709.dts | 19 +-
- arch/arm/dts/sun5i-a13-inet-98v-rev2.dts | 26 +--
- arch/arm/dts/sun5i-a13-utoo-p66.dts | 30 +++
- arch/arm/dts/sun5i-q8-common.dtsi | 10 +
- arch/arm/dts/sun5i-r8-chip.dts | 47 +++-
- arch/arm/dts/sun5i.dtsi | 31 +++
- arch/arm/dts/sun6i-a31-colombus.dts | 24 ++
- arch/arm/dts/sun6i-a31-hummingbird.dts | 132 ++++++-----
- arch/arm/dts/sun6i-a31.dtsi | 65 +++++-
- arch/arm/dts/sun6i-a31s-primo81.dts | 247 ++++++++++++++++++++-
- arch/arm/dts/sun6i-a31s-sina31s-core.dtsi | 142 ++++++++++++
- arch/arm/dts/sun6i-a31s-sina31s.dts | 153 +++++++++++++
- .../arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts | 205 +++++++++++++++++
- arch/arm/dts/sun7i-a20-bananapi.dts | 78 ++++++-
- arch/arm/dts/sun7i-a20-cubieboard2.dts | 23 ++
- arch/arm/dts/sun7i-a20-cubietruck.dts | 4 +
- arch/arm/dts/sun7i-a20-icnova-swac.dts | 169 ++++++++++++++
- arch/arm/dts/sun7i-a20-itead-ibox.dts | 125 +++++++++++
- arch/arm/dts/sun7i-a20-lamobo-r1.dts | 10 -
- arch/arm/dts/sun7i-a20-mk808c.dts | 39 ++++
- arch/arm/dts/sun7i-a20-olimex-som-evb.dts | 95 ++++++--
- arch/arm/dts/sun7i-a20-olinuxino-lime.dts | 12 +
- arch/arm/dts/sun7i-a20-olinuxino-lime2.dts | 47 ++++
- arch/arm/dts/sun7i-a20-olinuxino-micro.dts | 6 +
- arch/arm/dts/sun7i-a20-orangepi-mini.dts | 33 +++
- arch/arm/dts/sun7i-a20-orangepi.dts | 29 +++
- arch/arm/dts/sun7i-a20-pcduino3-nano.dts | 69 +++++-
- arch/arm/dts/sun7i-a20-pcduino3.dts | 58 ++++-
- arch/arm/dts/sun7i-a20-wexler-tab7200.dts | 90 +++++++-
- arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts | 187 +++++++++++++++-
- arch/arm/dts/sun7i-a20.dtsi | 113 +++++++++-
- arch/arm/dts/sun8i-a23-a33.dtsi | 71 ++++--
- arch/arm/dts/sun8i-a23-gt90h-v4.dts | 120 +++++++++-
- arch/arm/dts/sun8i-a23.dtsi | 25 +++
- arch/arm/dts/sun8i-a33-sinlinx-sina33.dts | 83 ++++++-
- arch/arm/dts/sun8i-a33.dtsi | 45 ++++
- arch/arm/dts/sun8i-a83t-cubietruck-plus.dts | 65 ++++++
- arch/arm/dts/sun8i-a83t.dtsi | 125 +++++------
- arch/arm/dts/sun8i-h3-orangepi-pc.dts | 69 ++++++
- arch/arm/dts/sun8i-h3-orangepi-plus.dts | 63 ++++++
- arch/arm/dts/sun8i-h3.dtsi | 189 +++++++++++-----
- arch/arm/dts/sun8i-q8-common.dtsi | 96 +++++++-
- arch/arm/dts/sun9i-a80-cubieboard4.dts | 36 +++
- arch/arm/dts/sun9i-a80-optimus.dts | 48 ++--
- arch/arm/dts/sun9i-a80.dtsi | 204 +++++++++++++++--
- arch/arm/dts/sunxi-itead-core-common.dtsi | 136 ++++++++++++
- arch/arm/dts/sunxi-q8-common.dtsi | 6 +
- 67 files changed, 4351 insertions(+), 497 deletions(-)
- create mode 100644 arch/arm/dts/axp22x.dtsi
- create mode 100644 arch/arm/dts/sun4i-a10-pcduino2.dts
- create mode 100644 arch/arm/dts/sun6i-a31s-sina31s-core.dtsi
- create mode 100644 arch/arm/dts/sun6i-a31s-sina31s.dts
- create mode 100644 arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
- create mode 100644 arch/arm/dts/sun7i-a20-icnova-swac.dts
- create mode 100644 arch/arm/dts/sun7i-a20-itead-ibox.dts
- create mode 100644 arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
- create mode 100644 arch/arm/dts/sunxi-itead-core-common.dtsi
-
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -126,6 +126,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
- sun4i-a10-mk802ii.dtb \
- sun4i-a10-olinuxino-lime.dtb \
- sun4i-a10-pcduino.dtb \
-+ sun4i-a10-pcduino2.dtb \
- sun4i-a10-pov-protab2-ips9.dtb
- dtb-$(CONFIG_MACH_SUN5I) += \
- sun5i-a10s-auxtek-t003.dtb \
-@@ -155,7 +156,9 @@ dtb-$(CONFIG_MACH_SUN6I) += \
- sun6i-a31-pangolin.dtb \
- sun6i-a31s-cs908.dtb \
- sun6i-a31s-primo81.dtb \
-- sun6i-a31s-sinovoip-bpi-m2.dtb
-+ sun6i-a31s-sina31s.dtb \
-+ sun6i-a31s-sinovoip-bpi-m2.dtb \
-+ sun6i-a31s-yones-toptech-bs1078-v2.dtb
- dtb-$(CONFIG_MACH_SUN7I) += \
- sun7i-a20-ainol-aw1.dtb \
- sun7i-a20-bananapi.dtb \
-@@ -164,6 +167,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
- sun7i-a20-cubietruck.dtb \
- sun7i-a20-hummingbird.dtb \
- sun7i-a20-i12-tvbox.dtb \
-+ sun7i-a20-icnova-swac.dtb \
-+ sun7i-a20-itead-ibox.dtb \
- sun7i-a20-lamobo-r1.dtb \
- sun7i-a20-m3.dtb \
- sun7i-a20-m5.dtb \
-@@ -190,6 +195,7 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \
- sun8i-a33-sinlinx-sina33.dtb
- dtb-$(CONFIG_MACH_SUN8I_A83T) += \
- sun8i-a83t-allwinner-h8homlet-v2.dtb \
-+ sun8i-a83t-cubietruck-plus.dtb \
- sun8i-a83t-sinovoip-bpi-m3.dtb
- dtb-$(CONFIG_MACH_SUN8I_H3) += \
- sun8i-h3-orangepi-pc.dtb \
---- /dev/null
-+++ b/arch/arm/dts/axp22x.dtsi
-@@ -0,0 +1,145 @@
-+/*
-+ * Copyright 2015 Chen-Yu Tsai
-+ *
-+ * Chen-Yu Tsai <wens@csie.org>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/*
-+ * AXP221/221s/223 Integrated Power Management Chip
-+ * http://www.x-powers.com/product/AXP22X.php
-+ * http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf
-+ */
-+
-+&axp22x {
-+ interrupt-controller;
-+ #interrupt-cells = <1>;
-+
-+ regulators {
-+ /* Default work frequency for buck regulators */
-+ x-powers,dcdc-freq = <3000>;
-+
-+ reg_dcdc1: dcdc1 {
-+ regulator-name = "dcdc1";
-+ };
-+
-+ reg_dcdc2: dcdc2 {
-+ regulator-name = "dcdc2";
-+ };
-+
-+ reg_dcdc3: dcdc3 {
-+ regulator-name = "dcdc3";
-+ };
-+
-+ reg_dcdc4: dcdc4 {
-+ regulator-name = "dcdc4";
-+ };
-+
-+ reg_dcdc5: dcdc5 {
-+ regulator-name = "dcdc5";
-+ };
-+
-+ reg_dc1sw: dc1sw {
-+ regulator-name = "dc1sw";
-+ };
-+
-+ reg_dc5ldo: dc5ldo {
-+ regulator-name = "dc5ldo";
-+ };
-+
-+ reg_aldo1: aldo1 {
-+ regulator-name = "aldo1";
-+ };
-+
-+ reg_aldo2: aldo2 {
-+ regulator-name = "aldo2";
-+ };
-+
-+ reg_aldo3: aldo3 {
-+ regulator-name = "aldo3";
-+ };
-+
-+ reg_dldo1: dldo1 {
-+ regulator-name = "dldo1";
-+ };
-+
-+ reg_dldo2: dldo2 {
-+ regulator-name = "dldo2";
-+ };
-+
-+ reg_dldo3: dldo3 {
-+ regulator-name = "dldo3";
-+ };
-+
-+ reg_dldo4: dldo4 {
-+ regulator-name = "dldo4";
-+ };
-+
-+ reg_eldo1: eldo1 {
-+ regulator-name = "eldo1";
-+ };
-+
-+ reg_eldo2: eldo2 {
-+ regulator-name = "eldo2";
-+ };
-+
-+ reg_eldo3: eldo3 {
-+ regulator-name = "eldo3";
-+ };
-+
-+ reg_ldo_io0: ldo_io0 {
-+ regulator-name = "ldo_io0";
-+ status = "disabled";
-+ };
-+
-+ reg_ldo_io1: ldo_io1 {
-+ regulator-name = "ldo_io1";
-+ status = "disabled";
-+ };
-+
-+ reg_rtc_ldo: rtc_ldo {
-+ /* RTC_LDO is a fixed, always-on regulator */
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "rtc_ldo";
-+ };
-+ };
-+};
---- a/arch/arm/dts/sun4i-a10-a1000.dts
-+++ b/arch/arm/dts/sun4i-a10-a1000.dts
-@@ -93,6 +93,10 @@
- status = "okay";
- };
-
-+&codec {
-+ status = "okay";
-+};
-+
- &ehci0 {
- status = "okay";
- };
---- a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
-+++ b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
-@@ -45,6 +45,7 @@
- #include "sunxi-common-regulators.dtsi"
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/input/input.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
-
- / {
- model = "Chuwi V7 CW0825";
-@@ -78,6 +79,27 @@
- };
- };
-
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins_a>;
-+ status = "okay";
-+};
-+
-+&i2c2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c2_pins_a>;
-+ status = "okay";
-+
-+ ft5306de4: touchscreen@38 {
-+ compatible = "edt,edt-ft5406";
-+ reg = <0x38>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
-+ touchscreen-size-x = <1024>;
-+ touchscreen-size-y = <768>;
-+ };
-+};
-+
- &lradc {
- vref-supply = <®_vcc3v0>;
- status = "okay";
---- a/arch/arm/dts/sun4i-a10-cubieboard.dts
-+++ b/arch/arm/dts/sun4i-a10-cubieboard.dts
-@@ -83,6 +83,10 @@
- status = "okay";
- };
-
-+&codec {
-+ status = "okay";
-+};
-+
- &cpu0 {
- cpu-supply = <®_dcdc2>;
- };
---- a/arch/arm/dts/sun4i-a10-gemei-g9.dts
-+++ b/arch/arm/dts/sun4i-a10-gemei-g9.dts
-@@ -47,6 +47,7 @@
- #include "sunxi-common-regulators.dtsi"
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/input/input.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
-
- / {
- model = "Gemei G9 Tablet";
-@@ -64,12 +65,22 @@
- /*
- * TODO:
- * 2x cameras via CSI
-- * bma250 IRQs
- * AXP battery management
- * NAND
- * OTG
- * Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
- */
-+&codec {
-+ /* PH15 controls power to external amplifier (ft2012q) */
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&codec_pa_pin>;
-+ allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>;
-+ status = "okay";
-+};
-+
-+&cpu0 {
-+ cpu-supply = <®_dcdc2>;
-+};
-
- &ehci0 {
- status = "okay";
-@@ -85,15 +96,13 @@
- status = "okay";
-
- axp209: pmic@34 {
-- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
--
-- interrupt-controller;
-- #interrupt-cells = <1>;
- };
- };
-
-+#include "axp209.dtsi"
-+
- &i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
-@@ -103,17 +112,13 @@
- bma250@18 {
- compatible = "bosch,bma250";
- reg = <0x18>;
--
-- /*
-- * TODO: interrupt pins:
-- * int1 - PH00
-- * int2 - PI10
-- */
-+ interrupt-parent = <&pio>;
-+ interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */
- };
- };
-
- &lradc {
-- vref-supply = <®_vcc3v0>;
-+ vref-supply = <®_ldo2>;
-
- status = "okay";
-
-@@ -149,6 +154,40 @@
- status = "okay";
- };
-
-+&pio {
-+ codec_pa_pin: codec_pa_pin@0 {
-+ allwinner,pins = "PH15";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+};
-+
-+®_dcdc2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-cpu";
-+};
-+
-+®_dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1250000>;
-+ regulator-max-microvolt = <1250000>;
-+ regulator-name = "vdd-int-dll";
-+};
-+
-+®_ldo1 {
-+ regulator-name = "vdd-rtc";
-+};
-+
-+®_ldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "avcc";
-+};
-+
- ®_usb1_vbus {
- status = "okay";
- };
---- a/arch/arm/dts/sun4i-a10-inet1.dts
-+++ b/arch/arm/dts/sun4i-a10-inet1.dts
-@@ -47,6 +47,7 @@
- #include <dt-bindings/input/input.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
-+#include <dt-bindings/pwm/pwm.h>
-
- / {
- model = "iNet-1";
-@@ -56,11 +57,25 @@
- serial0 = &uart0;
- };
-
-+ backlight: backlight {
-+ compatible = "pwm-backlight";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&bl_en_pin_inet>;
-+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-+ default-brightness-level = <8>;
-+ enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
-+ };
-+
- chosen {
- stdout-path = "serial0:115200n8";
- };
- };
-
-+&codec {
-+ status = "okay";
-+};
-+
- &cpu0 {
- cpu-supply = <®_dcdc2>;
- };
-@@ -104,6 +119,19 @@
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
-+
-+ ft5x: touchscreen@38 {
-+ compatible = "edt,edt-ft5406";
-+ reg = <0x38>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&touchscreen_wake_pin>;
-+ wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
-+ touchscreen-size-x = <600>;
-+ touchscreen-size-y = <1024>;
-+ touchscreen-swapped-x-y;
-+ };
- };
-
- &lradc {
-@@ -151,6 +179,20 @@
- };
-
- &pio {
-+ bl_en_pin_inet: bl_en_pin@0 {
-+ allwinner,pins = "PH7";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ touchscreen_wake_pin: touchscreen_wake_pin@0 {
-+ allwinner,pins = "PB13";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
-@@ -166,6 +208,12 @@
- };
- };
-
-+&pwm {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pwm0_pins_a>;
-+ status = "okay";
-+};
-+
- ®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
---- a/arch/arm/dts/sun4i-a10-inet97fv2.dts
-+++ b/arch/arm/dts/sun4i-a10-inet97fv2.dts
-@@ -47,6 +47,8 @@
- #include "sunxi-common-regulators.dtsi"
-
- #include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
-
- / {
- model = "INet-97F Rev 02";
-@@ -61,8 +63,8 @@
- };
- };
-
--&ehci0 {
-- status = "okay";
-+&cpu0 {
-+ cpu-supply = <®_dcdc2>;
- };
-
- &ehci1 {
-@@ -75,12 +77,71 @@
- status = "okay";
-
- axp209: pmic@34 {
-- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-+ };
-+};
-+
-+#include "axp209.dtsi"
-+
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins_a>;
-+ status = "okay";
-+};
-+
-+&i2c2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c2_pins_a>;
-+ status = "okay";
-+
-+ ft5406ee8: touchscreen@38 {
-+ compatible = "edt,edt-ft5406";
-+ reg = <0x38>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
-+ touchscreen-size-x = <800>;
-+ touchscreen-size-y = <480>;
-+ };
-+};
-+
-+&lradc {
-+ vref-supply = <®_ldo2>;
-+ status = "okay";
-+
-+ button@200 {
-+ label = "Menu";
-+ linux,code = <KEY_MENU>;
-+ channel = <0>;
-+ voltage = <200000>;
-+ };
-+
-+ button@600 {
-+ label = "Volume Up";
-+ linux,code = <KEY_VOLUMEUP>;
-+ channel = <0>;
-+ voltage = <600000>;
-+ };
-
-- interrupt-controller;
-- #interrupt-cells = <1>;
-+ button@800 {
-+ label = "Volume Down";
-+ linux,code = <KEY_VOLUMEDOWN>;
-+ channel = <0>;
-+ voltage = <800000>;
-+ };
-+
-+ button@1000 {
-+ label = "Home";
-+ linux,code = <KEY_HOMEPAGE>;
-+ channel = <0>;
-+ voltage = <1000000>;
-+ };
-+
-+ button@1200 {
-+ label = "Esc";
-+ linux,code = <KEY_ESC>;
-+ channel = <0>;
-+ voltage = <1200000>;
- };
- };
-
-@@ -94,15 +155,52 @@
- status = "okay";
- };
-
--&ohci0 {
-+&otg_sram {
- status = "okay";
- };
-
--&ohci1 {
-- status = "okay";
-+&pio {
-+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+ allwinner,pins = "PH4";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+
-+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-+ allwinner,pins = "PH5";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
-+ };
-+};
-+
-+®_dcdc2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-cpu";
- };
-
--®_usb1_vbus {
-+®_dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1250000>;
-+ regulator-max-microvolt = <1250000>;
-+ regulator-name = "vdd-int-dll";
-+};
-+
-+®_ldo1 {
-+ regulator-name = "vdd-rtc";
-+};
-+
-+®_ldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "avcc";
-+};
-+
-+®_usb0_vbus {
- status = "okay";
- };
-
-@@ -116,8 +214,17 @@
- status = "okay";
- };
-
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
- &usbphy {
-- usb1_vbus-supply = <®_usb1_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+ usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-+ usb0_vbus-supply = <®_usb0_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
---- a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
-+++ b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
-@@ -59,6 +59,159 @@
- chosen {
- stdout-path = "serial0:115200n8";
- };
-+
-+ gpio_keys {
-+ compatible = "gpio-keys-polled";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&key_pins_inet9f>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ poll-interval = <20>;
-+
-+ button@0 {
-+ label = "Left Joystick Left";
-+ linux,code = <ABS_X>;
-+ linux,input-type = <EV_ABS>;
-+ linux,input-value = <0xffffffff>; /* -1 */
-+ gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
-+ };
-+
-+ button@1 {
-+ label = "Left Joystick Right";
-+ linux,code = <ABS_X>;
-+ linux,input-type = <EV_ABS>;
-+ linux,input-value = <1>;
-+ gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
-+ };
-+
-+ button@2 {
-+ label = "Left Joystick Up";
-+ linux,code = <ABS_Y>;
-+ linux,input-type = <EV_ABS>;
-+ linux,input-value = <0xffffffff>; /* -1 */
-+ gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
-+ };
-+
-+ button@3 {
-+ label = "Left Joystick Down";
-+ linux,code = <ABS_Y>;
-+ linux,input-type = <EV_ABS>;
-+ linux,input-value = <1>;
-+ gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
-+ };
-+
-+ button@4 {
-+ label = "Right Joystick Left";
-+ linux,code = <ABS_Z>;
-+ linux,input-type = <EV_ABS>;
-+ linux,input-value = <0xffffffff>; /* -1 */
-+ gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
-+ };
-+
-+ button@5 {
-+ label = "Right Joystick Right";
-+ linux,code = <ABS_Z>;
-+ linux,input-type = <EV_ABS>;
-+ linux,input-value = <1>;
-+ gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
-+ };
-+
-+ button@6 {
-+ label = "Right Joystick Up";
-+ linux,code = <ABS_RZ>;
-+ linux,input-type = <EV_ABS>;
-+ linux,input-value = <0xffffffff>; /* -1 */
-+ gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
-+ };
-+
-+ button@7 {
-+ label = "Right Joystick Down";
-+ linux,code = <ABS_RZ>;
-+ linux,input-type = <EV_ABS>;
-+ linux,input-value = <1>;
-+ gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
-+ };
-+
-+ button@8 {
-+ label = "DPad Left";
-+ linux,code = <ABS_HAT0X>;
-+ linux,input-type = <EV_ABS>;
-+ linux,input-value = <0xffffffff>; /* -1 */
-+ gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
-+ };
-+
-+ button@9 {
-+ label = "DPad Right";
-+ linux,code = <ABS_HAT0X>;
-+ linux,input-type = <EV_ABS>;
-+ linux,input-value = <1>;
-+ gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
-+ };
-+
-+ button@10 {
-+ label = "DPad Up";
-+ linux,code = <ABS_HAT0Y>;
-+ linux,input-type = <EV_ABS>;
-+ linux,input-value = <0xffffffff>; /* -1 */
-+ gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
-+ };
-+
-+ button@11 {
-+ label = "DPad Down";
-+ linux,code = <ABS_HAT0Y>;
-+ linux,input-type = <EV_ABS>;
-+ linux,input-value = <1>;
-+ gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
-+ };
-+
-+ button@12 {
-+ label = "Button X";
-+ linux,code = <BTN_X>;
-+ gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
-+ };
-+
-+ button@13 {
-+ label = "Button Y";
-+ linux,code = <BTN_Y>;
-+ gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
-+ };
-+
-+ button@14 {
-+ label = "Button A";
-+ linux,code = <BTN_A>;
-+ gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
-+ };
-+
-+ button@15 {
-+ label = "Button B";
-+ linux,code = <BTN_B>;
-+ gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
-+ };
-+
-+ button@16 {
-+ label = "Select Button";
-+ linux,code = <BTN_SELECT>;
-+ gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
-+ };
-+
-+ button@17 {
-+ label = "Start Button";
-+ linux,code = <BTN_START>;
-+ gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
-+ };
-+
-+ button@18 {
-+ label = "Top Left Button";
-+ linux,code = <BTN_TL>;
-+ gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
-+ };
-+
-+ button@19 {
-+ label = "Top Right Button";
-+ linux,code = <BTN_TR>;
-+ gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
-+ };
-+ };
- };
-
- &cpu0 {
-@@ -86,12 +239,29 @@
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
-+
-+ /* Accelerometer */
-+ bma250@18 {
-+ compatible = "bosch,bma250";
-+ reg = <0x18>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
-+ };
- };
-
- &i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
-+
-+ ft5406ee8: touchscreen@38 {
-+ compatible = "edt,edt-ft5406";
-+ reg = <0x38>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
-+ touchscreen-size-x = <800>;
-+ touchscreen-size-y = <480>;
-+ };
- };
-
- &lradc {
-@@ -149,6 +319,17 @@
- };
-
- &pio {
-+ key_pins_inet9f: key_pins@0 {
-+ allwinner,pins = "PA0", "PA1", "PA3", "PA4",
-+ "PA5", "PA6", "PA8", "PA9",
-+ "PA11", "PA12", "PA13",
-+ "PA14", "PA15", "PA16", "PA17",
-+ "PH22", "PH23", "PH24", "PH25", "PH26";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
---- a/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
-+++ b/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
-@@ -1,5 +1,6 @@
- /*
- * Copyright 2015 Josef Gajdusek <atx@atx.name>
-+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
-@@ -42,22 +43,11 @@
-
- /dts-v1/;
- #include "sun4i-a10.dtsi"
--#include "sunxi-common-regulators.dtsi"
--
--#include <dt-bindings/gpio/gpio.h>
--#include <dt-bindings/pinctrl/sun4i-a10.h>
-+#include "sunxi-itead-core-common.dtsi"
-
- / {
- model = "Iteaduino Plus A10";
- compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10";
--
-- aliases {
-- serial0 = &uart0;
-- };
--
-- chosen {
-- stdout-path = "serial0:115200n8";
-- };
- };
-
- &ahci {
-@@ -65,18 +55,6 @@
- status = "okay";
- };
-
--&cpu0 {
-- cpu-supply = <®_dcdc2>;
--};
--
--&ehci0 {
-- status = "okay";
--};
--
--&ehci1 {
-- status = "okay";
--};
--
- &emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
-@@ -89,12 +67,7 @@
- };
-
- &i2c0 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&i2c0_pins_a>;
-- status = "okay";
--
- axp209: pmic@34 {
-- reg = <0x34>;
- interrupts = <0>;
- };
- };
-@@ -135,68 +108,13 @@
- status = "okay";
- };
-
--&ohci0 {
-- status = "okay";
--};
--
--&ohci1 {
-- status = "okay";
--};
--
- ®_ahci_5v {
- status = "okay";
- };
-
--#include "axp209.dtsi"
--
--®_dcdc2 {
-- regulator-always-on;
-- regulator-min-microvolt = <1000000>;
-- regulator-max-microvolt = <1450000>;
-- regulator-name = "vdd-cpu";
--};
--
--®_dcdc3 {
-- regulator-always-on;
-- regulator-min-microvolt = <1000000>;
-- regulator-max-microvolt = <1400000>;
-- regulator-name = "vdd-int-dll";
--};
--
--®_ldo1 {
-- regulator-name = "vdd-rtc";
--};
--
--®_ldo2 {
-- regulator-always-on;
-- regulator-min-microvolt = <3000000>;
-- regulator-max-microvolt = <3000000>;
-- regulator-name = "avcc";
--};
--
--®_usb1_vbus {
-- status = "okay";
--};
--
--®_usb2_vbus {
-- status = "okay";
--};
--
- &spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins_a>,
- <&spi0_cs0_pins_a>;
- status = "okay";
- };
--
--&uart0 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&uart0_pins_a>;
-- status = "okay";
--};
--
--&usbphy {
-- usb1_vbus-supply = <®_usb1_vbus>;
-- usb2_vbus-supply = <®_usb2_vbus>;
-- status = "okay";
--};
---- a/arch/arm/dts/sun4i-a10-jesurun-q5.dts
-+++ b/arch/arm/dts/sun4i-a10-jesurun-q5.dts
-@@ -156,6 +156,10 @@
- status = "okay";
- };
-
-+&otg_sram {
-+ status = "okay";
-+};
-+
- &pio {
- emac_power_pin_q5: emac_power_pin@0 {
- allwinner,pins = "PH19";
-@@ -172,6 +176,11 @@
- };
- };
-
-+®_usb0_vbus {
-+ regulator-boot-on;
-+ status = "okay";
-+};
-+
- ®_usb1_vbus {
- status = "okay";
- };
-@@ -186,7 +195,13 @@
- status = "okay";
- };
-
-+&usb_otg {
-+ dr_mode = "host";
-+ status = "okay";
-+};
-+
- &usbphy {
-+ usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
---- a/arch/arm/dts/sun4i-a10-marsboard.dts
-+++ b/arch/arm/dts/sun4i-a10-marsboard.dts
-@@ -91,6 +91,10 @@
- status = "okay";
- };
-
-+&codec {
-+ status = "okay";
-+};
-+
- &ehci0 {
- status = "okay";
- };
-@@ -154,6 +158,10 @@
- status = "okay";
- };
-
-+&otg_sram {
-+ status = "okay";
-+};
-+
- &pio {
- led_pins_marsboard: led_pins@0 {
- allwinner,pins = "PB5", "PB6", "PB7", "PB8";
-@@ -161,6 +169,13 @@
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-+
-+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+ allwinner,pins = "PH4";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
- };
-
- ®_usb1_vbus {
-@@ -184,7 +199,15 @@
- status = "okay";
- };
-
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
- &usbphy {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb0_id_detect_pin>;
-+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
---- a/arch/arm/dts/sun4i-a10-mk802.dts
-+++ b/arch/arm/dts/sun4i-a10-mk802.dts
-@@ -44,6 +44,7 @@
- #include "sun4i-a10.dtsi"
- #include "sunxi-common-regulators.dtsi"
- #include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-
- / {
- model = "MK802";
-@@ -58,6 +59,10 @@
- };
- };
-
-+&codec {
-+ status = "okay";
-+};
-+
- &ehci0 {
- status = "okay";
- };
-@@ -80,7 +85,25 @@
- status = "okay";
- };
-
-+&otg_sram {
-+ status = "okay";
-+};
-+
- &pio {
-+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+ allwinner,pins = "PH4";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-+ allwinner,pins = "PH5";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
- usb2_vbus_pin_mk802: usb2_vbus_pin@0 {
- allwinner,pins = "PH12";
- allwinner,function = "gpio_out";
-@@ -89,6 +112,10 @@
- };
- };
-
-+®_usb0_vbus {
-+ status = "okay";
-+};
-+
- ®_usb1_vbus {
- status = "okay";
- };
-@@ -105,7 +132,17 @@
- status = "okay";
- };
-
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
- &usbphy {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-+ usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-+ usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
---- a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
-+++ b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
-@@ -124,6 +124,18 @@
- };
- };
-
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins_a>;
-+ status = "okay";
-+
-+ eeprom: eeprom@50 {
-+ compatible = "atmel,24c16";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+};
-+
- &mdio {
- status = "okay";
-
---- a/arch/arm/dts/sun4i-a10-pcduino.dts
-+++ b/arch/arm/dts/sun4i-a10-pcduino.dts
-@@ -104,6 +104,10 @@
- };
- };
-
-+&cpu0 {
-+ cpu-supply = <®_dcdc2>;
-+};
-+
- &ehci0 {
- status = "okay";
- };
-@@ -129,12 +133,8 @@
- status = "okay";
-
- axp209: pmic@34 {
-- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
--
-- interrupt-controller;
-- #interrupt-cells = <1>;
- };
- };
-
-@@ -164,6 +164,10 @@
- status = "okay";
- };
-
-+&otg_sram {
-+ status = "okay";
-+};
-+
- &pio {
- led_pins_pcduino: led_pins@0 {
- allwinner,pins = "PH15", "PH16";
-@@ -178,14 +182,40 @@
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-+
-+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+ allwinner,pins = "PH4";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
- };
-
--®_usb1_vbus {
-- status = "okay";
-+#include "axp209.dtsi"
-+
-+®_dcdc2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-cpu";
- };
-
--®_usb2_vbus {
-- status = "okay";
-+®_dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-int-dll";
-+};
-+
-+®_ldo1 {
-+ regulator-name = "vdd-rtc";
-+};
-+
-+®_ldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "avcc";
- };
-
- &uart0 {
-@@ -194,8 +224,16 @@
- status = "okay";
- };
-
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
- &usbphy {
-- usb1_vbus-supply = <®_usb1_vbus>;
-- usb2_vbus-supply = <®_usb2_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb0_id_detect_pin>;
-+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+ usb1_vbus-supply = <®_vcc5v0>; /* USB1 VBUS is always on */
-+ usb2_vbus-supply = <®_vcc5v0>; /* USB2 VBUS is always on */
- status = "okay";
- };
---- /dev/null
-+++ b/arch/arm/dts/sun4i-a10-pcduino2.dts
-@@ -0,0 +1,78 @@
-+/*
-+ * Copyright 2015 Siarhei Siamashka <siarhei.siamashka@gmail.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/*
-+ * The LinkSprite pcDuino2 board is almost identical to the older
-+ * LinkSprite pcDuino1 board. The only software visible difference
-+ * is that the pcDuino2 board got a USB VBUS voltage regulator, which
-+ * is controlled by the PD2 pin (pulled-up by default). Also one of
-+ * the USB host ports has been replaced with a USB WIFI chip.
-+ */
-+
-+#include "sun4i-a10-pcduino.dts"
-+
-+/ {
-+ model = "LinkSprite pcDuino2";
-+ compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10";
-+};
-+
-+&pio {
-+ usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 {
-+ allwinner,pins = "PD2";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+};
-+
-+®_usb2_vbus {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb2_vbus_pin_pcduino2>;
-+ gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>;
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ usb1_vbus-supply = <®_vcc3v3>; /* USB WIFI is always on */
-+ usb2_vbus-supply = <®_usb2_vbus>;
-+ status = "okay";
-+};
---- a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
-+++ b/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
-@@ -47,6 +47,7 @@
- #include <dt-bindings/input/input.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
-+#include <dt-bindings/pwm/pwm.h>
-
- / {
- model = "Point of View Protab2-IPS9";
-@@ -56,11 +57,28 @@
- serial0 = &uart0;
- };
-
-+ backlight: backlight {
-+ compatible = "pwm-backlight";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&bl_en_pin_protab>;
-+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-+ default-brightness-level = <8>;
-+ enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
-+ };
-+
- chosen {
- stdout-path = "serial0:115200n8";
- };
- };
-
-+&codec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&codec_pa_pin>;
-+ allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
-+ status = "okay";
-+};
-+
- &cpu0 {
- cpu-supply = <®_dcdc2>;
- };
-@@ -86,12 +104,36 @@
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
-+
-+ /* Accelerometer */
-+ bma250@18 {
-+ compatible = "bosch,bma250";
-+ reg = <0x18>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
-+ };
- };
-
- &i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
-+
-+ pixcir_ts@5c {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&touchscreen_pins>;
-+ compatible = "pixcir,pixcir_tangoc";
-+ reg = <0x5c>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
-+ attb-gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
-+ enable-gpios = <&pio 0 5 GPIO_ACTIVE_LOW>;
-+ wake-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
-+ touchscreen-size-x = <1024>;
-+ touchscreen-size-y = <768>;
-+ touchscreen-inverted-x;
-+ touchscreen-inverted-y;
-+ };
- };
-
- &lradc {
-@@ -128,6 +170,27 @@
- };
-
- &pio {
-+ bl_en_pin_protab: bl_en_pin@0 {
-+ allwinner,pins = "PH7";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ codec_pa_pin: codec_pa_pin@0 {
-+ allwinner,pins = "PH15";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ touchscreen_pins: touchscreen_pins@0 {
-+ allwinner,pins = "PA5", "PB13";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
-@@ -143,6 +206,12 @@
- };
- };
-
-+&pwm {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pwm0_pins_a>;
-+ status = "okay";
-+};
-+
- ®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
---- a/arch/arm/dts/sun4i-a10.dtsi
-+++ b/arch/arm/dts/sun4i-a10.dtsi
-@@ -45,6 +45,7 @@
-
- #include <dt-bindings/thermal/thermal.h>
-
-+#include <dt-bindings/clock/sun4i-a10-pll2.h>
- #include <dt-bindings/dma/sun4i-a10.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
-
-@@ -65,7 +66,7 @@
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
-- <&ahb_gates 44>;
-+ <&ahb_gates 44>, <&dram_gates 26>;
- status = "disabled";
- };
-
-@@ -74,7 +75,8 @@
- "simple-framebuffer";
- allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
- clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
-- <&ahb_gates 44>, <&ahb_gates 46>;
-+ <&ahb_gates 44>, <&ahb_gates 46>,
-+ <&dram_gates 25>, <&dram_gates 26>;
- status = "disabled";
- };
-
-@@ -83,7 +85,8 @@
- "simple-framebuffer";
- allwinner,pipeline = "de_fe0-de_be0-lcd0";
- clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
-- <&ahb_gates 46>;
-+ <&ahb_gates 46>, <&dram_gates 25>,
-+ <&dram_gates 26>;
- status = "disabled";
- };
-
-@@ -92,7 +95,8 @@
- "simple-framebuffer";
- allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
- clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
-- <&ahb_gates 44>, <&ahb_gates 46>;
-+ <&ahb_gates 44>, <&ahb_gates 46>,
-+ <&dram_gates 25>, <&dram_gates 26>;
- status = "disabled";
- };
- };
-@@ -195,6 +199,15 @@
- clock-output-names = "pll1";
- };
-
-+ pll2: clk@01c20008 {
-+ #clock-cells = <1>;
-+ compatible = "allwinner,sun4i-a10-pll2-clk";
-+ reg = <0x01c20008 0x8>;
-+ clocks = <&osc24M>;
-+ clock-output-names = "pll2-1x", "pll2-2x",
-+ "pll2-4x", "pll2-8x";
-+ };
-+
- pll4: clk@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
-@@ -241,6 +254,7 @@
- compatible = "allwinner,sun4i-a10-axi-gates-clk";
- reg = <0x01c2005c 0x4>;
- clocks = <&axi>;
-+ clock-indices = <0>;
- clock-output-names = "axi_dram";
- };
-
-@@ -257,17 +271,36 @@
- compatible = "allwinner,sun4i-a10-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb>;
-+ clock-indices = <0>, <1>,
-+ <2>, <3>,
-+ <4>, <5>, <6>,
-+ <7>, <8>, <9>,
-+ <10>, <11>, <12>,
-+ <13>, <14>, <16>,
-+ <17>, <18>, <20>,
-+ <21>, <22>, <23>,
-+ <24>, <25>, <26>,
-+ <32>, <33>, <34>,
-+ <35>, <36>, <37>,
-+ <40>, <41>, <43>,
-+ <44>, <45>,
-+ <46>, <47>,
-+ <50>, <52>;
- clock-output-names = "ahb_usb0", "ahb_ehci0",
-- "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss",
-- "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1",
-- "ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand",
-- "ahb_sdram", "ahb_ace", "ahb_emac", "ahb_ts",
-- "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3",
-- "ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve",
-- "ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0",
-- "ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi",
-- "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
-- "ahb_de_fe1", "ahb_mp", "ahb_mali400";
-+ "ahb_ohci0", "ahb_ehci1",
-+ "ahb_ohci1", "ahb_ss", "ahb_dma",
-+ "ahb_bist", "ahb_mmc0", "ahb_mmc1",
-+ "ahb_mmc2", "ahb_mmc3", "ahb_ms",
-+ "ahb_nand", "ahb_sdram", "ahb_ace",
-+ "ahb_emac", "ahb_ts", "ahb_spi0",
-+ "ahb_spi1", "ahb_spi2", "ahb_spi3",
-+ "ahb_pata", "ahb_sata", "ahb_gps",
-+ "ahb_ve", "ahb_tvd", "ahb_tve0",
-+ "ahb_tve1", "ahb_lcd0", "ahb_lcd1",
-+ "ahb_csi0", "ahb_csi1", "ahb_hdmi",
-+ "ahb_de_be0", "ahb_de_be1",
-+ "ahb_de_fe0", "ahb_de_fe1",
-+ "ahb_mp", "ahb_mali400";
- };
-
- apb0: apb0@01c20054 {
-@@ -283,9 +316,14 @@
- compatible = "allwinner,sun4i-a10-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb0>;
-+ clock-indices = <0>, <1>,
-+ <2>, <3>,
-+ <5>, <6>,
-+ <7>, <10>;
- clock-output-names = "apb0_codec", "apb0_spdif",
-- "apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0",
-- "apb0_ir1", "apb0_keypad";
-+ "apb0_ac97", "apb0_iis",
-+ "apb0_pio", "apb0_ir0",
-+ "apb0_ir1", "apb0_keypad";
- };
-
- apb1: clk@01c20058 {
-@@ -301,12 +339,22 @@
- compatible = "allwinner,sun4i-a10-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb1>;
-+ clock-indices = <0>, <1>,
-+ <2>, <4>,
-+ <5>, <6>,
-+ <7>, <16>,
-+ <17>, <18>,
-+ <19>, <20>,
-+ <21>, <22>,
-+ <23>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
-- "apb1_i2c2", "apb1_can", "apb1_scr",
-- "apb1_ps20", "apb1_ps21", "apb1_uart0",
-- "apb1_uart1", "apb1_uart2", "apb1_uart3",
-- "apb1_uart4", "apb1_uart5", "apb1_uart6",
-- "apb1_uart7";
-+ "apb1_i2c2", "apb1_can",
-+ "apb1_scr", "apb1_ps20",
-+ "apb1_ps21", "apb1_uart0",
-+ "apb1_uart1", "apb1_uart2",
-+ "apb1_uart3", "apb1_uart4",
-+ "apb1_uart5", "apb1_uart6",
-+ "apb1_uart7";
- };
-
- nand_clk: clk@01c20080 {
-@@ -446,6 +494,48 @@
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi3";
- };
-+
-+ dram_gates: clk@01c20100 {
-+ #clock-cells = <1>;
-+ compatible = "allwinner,sun4i-a10-dram-gates-clk";
-+ reg = <0x01c20100 0x4>;
-+ clocks = <&pll5 0>;
-+ clock-indices = <0>,
-+ <1>, <2>,
-+ <3>,
-+ <4>,
-+ <5>, <6>,
-+ <15>,
-+ <24>, <25>,
-+ <26>, <27>,
-+ <28>, <29>;
-+ clock-output-names = "dram_ve",
-+ "dram_csi0", "dram_csi1",
-+ "dram_ts",
-+ "dram_tvd",
-+ "dram_tve0", "dram_tve1",
-+ "dram_output",
-+ "dram_de_fe1", "dram_de_fe0",
-+ "dram_de_be0", "dram_de_be1",
-+ "dram_de_mp", "dram_ace";
-+ };
-+
-+ ve_clk: clk@01c2013c {
-+ #clock-cells = <0>;
-+ #reset-cells = <0>;
-+ compatible = "allwinner,sun4i-a10-ve-clk";
-+ reg = <0x01c2013c 0x4>;
-+ clocks = <&pll4>;
-+ clock-output-names = "ve";
-+ };
-+
-+ codec_clk: clk@01c20140 {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun4i-a10-codec-clk";
-+ reg = <0x01c20140 0x4>;
-+ clocks = <&pll2 SUN4I_A10_PLL2_1X>;
-+ clock-output-names = "codec";
-+ };
- };
-
- soc@01c00000 {
-@@ -656,6 +746,14 @@
- status = "disabled";
- };
-
-+ crypto: crypto-engine@01c15000 {
-+ compatible = "allwinner,sun4i-a10-crypto";
-+ reg = <0x01c15000 0x1000>;
-+ interrupts = <86>;
-+ clocks = <&ahb_gates 5>, <&ss_clk>;
-+ clock-names = "ahb", "mod";
-+ };
-+
- spi2: spi@01c17000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c17000 0x1000>;
-@@ -961,6 +1059,19 @@
- status = "disabled";
- };
-
-+ codec: codec@01c22c00 {
-+ #sound-dai-cells = <0>;
-+ compatible = "allwinner,sun4i-a10-codec";
-+ reg = <0x01c22c00 0x40>;
-+ interrupts = <30>;
-+ clocks = <&apb0_gates 0>, <&codec_clk>;
-+ clock-names = "apb", "codec";
-+ dmas = <&dma SUN4I_DMA_NORMAL 19>,
-+ <&dma SUN4I_DMA_NORMAL 19>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ };
-+
- sid: eeprom@01c23800 {
- compatible = "allwinner,sun4i-a10-sid";
- reg = <0x01c23800 0x10>;
---- a/arch/arm/dts/sun5i-a10s-auxtek-t004.dts
-+++ b/arch/arm/dts/sun5i-a10s-auxtek-t004.dts
-@@ -86,6 +86,20 @@
- status = "okay";
- };
-
-+&i2c0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins_a>;
-+ status = "okay";
-+
-+ axp152: pmic@30 {
-+ compatible = "x-powers,axp152";
-+ reg = <0x30>;
-+ interrupts = <0>;
-+ interrupt-controller;
-+ #interrupt-cells = <1>;
-+ };
-+};
-+
- &mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
---- a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
-+++ b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
-@@ -111,7 +111,7 @@
- status = "okay";
-
- at24@50 {
-- compatible = "at,24c16";
-+ compatible = "atmel,24c16";
- pagesize = <16>;
- reg = <0x50>;
- read-only;
---- a/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts
-+++ b/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts
-@@ -123,7 +123,7 @@
-
- &mmc0 {
- pinctrl-names = "default";
-- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>;
-+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-@@ -131,27 +131,12 @@
- status = "okay";
- };
-
--&mmc2 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&mmc2_pins_a>;
-- vmmc-supply = <®_vcc3v3>;
-- bus-width = <8>;
-- non-removable;
-- status = "okay";
--
-- mmccard: mmccard@0 {
-- reg = <0>;
-- compatible = "mmc-card";
-- broken-hpi;
-- };
--};
--
- &otg_sram {
- status = "okay";
- };
-
- &pio {
-- mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 {
-+ mmc0_cd_pin_d709: mmc0_cd_pin@0 {
- allwinner,pins = "PG0";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
---- a/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts
-+++ b/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts
-@@ -123,21 +123,6 @@
- status = "okay";
- };
-
--&mmc2 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&mmc2_pins_a>;
-- vmmc-supply = <®_vcc3v3>;
-- bus-width = <8>;
-- non-removable;
-- status = "okay";
--
-- mmccard: mmccard@0 {
-- reg = <0>;
-- compatible = "mmc-card";
-- broken-hpi;
-- };
--};
--
- &otg_sram {
- status = "okay";
- };
-@@ -201,11 +186,6 @@
- status = "okay";
- };
-
--®_usb1_vbus {
-- gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
-- status = "okay";
--};
--
- &uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_b>;
-@@ -221,16 +201,12 @@
- allwinner,pins = "PG12";
- };
-
--&usb1_vbus_pin_a {
-- allwinner,pins = "PG11";
--};
--
- &usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
- usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
- usb0_vbus-supply = <®_usb0_vbus>;
-- usb1_vbus-supply = <®_usb1_vbus>;
-+ usb1_vbus-supply = <®_ldo3>;
- status = "okay";
- };
---- a/arch/arm/dts/sun5i-a13-utoo-p66.dts
-+++ b/arch/arm/dts/sun5i-a13-utoo-p66.dts
-@@ -47,11 +47,21 @@
- #include <dt-bindings/input/input.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
-+#include <dt-bindings/pwm/pwm.h>
-
- / {
- model = "Utoo P66";
- compatible = "utoo,p66", "allwinner,sun5i-a13";
-
-+ backlight: backlight {
-+ compatible = "pwm-backlight";
-+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-+ /* Note levels of 10 / 20% result in backlight off */
-+ brightness-levels = <0 30 40 50 60 70 80 90 100>;
-+ default-brightness-level = <6>;
-+ /* TODO: backlight uses axp gpio1 as enable pin */
-+ };
-+
- i2c_lcd: i2c@0 {
- /* The lcd panel i2c interface is hooked up via gpios */
- compatible = "i2c-gpio";
-@@ -63,6 +73,13 @@
- };
- };
-
-+&codec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&codec_pa_pin>;
-+ allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
-+ status = "okay";
-+};
-+
- &cpu0 {
- cpu-supply = <®_dcdc2>;
- };
-@@ -158,6 +175,13 @@
- };
-
- &pio {
-+ codec_pa_pin: codec_pa_pin@0 {
-+ allwinner,pins = "PG3";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
- mmc0_cd_pin_p66: mmc0_cd_pin@0 {
- allwinner,pins = "PG0";
- allwinner,function = "gpio_in";
-@@ -201,6 +225,12 @@
- };
- };
-
-+&pwm {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pwm0_pins>;
-+ status = "okay";
-+};
-+
- ®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
---- a/arch/arm/dts/sun5i-q8-common.dtsi
-+++ b/arch/arm/dts/sun5i-q8-common.dtsi
-@@ -41,11 +41,21 @@
- */
- #include "sunxi-q8-common.dtsi"
-
-+#include <dt-bindings/pwm/pwm.h>
-+
- / {
- aliases {
- serial0 = &uart1;
- };
-
-+ backlight: backlight {
-+ compatible = "pwm-backlight";
-+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-+ default-brightness-level = <8>;
-+ /* TODO: backlight uses axp gpio1 as enable pin */
-+ };
-+
- chosen {
- stdout-path = "serial0:115200n8";
- };
---- a/arch/arm/dts/sun5i-r8-chip.dts
-+++ b/arch/arm/dts/sun5i-r8-chip.dts
-@@ -64,6 +64,26 @@
- chosen {
- stdout-path = "serial0:115200n8";
- };
-+
-+ wifi_reg_on: wifi_reg_on {
-+ compatible = "regulator-fixed";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&chip_wifi_reg_on_pin>;
-+
-+ regulator-name = "wifi-reg-on";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ gpio = <&pio 2 19 GPIO_ACTIVE_HIGH>; /* PC19 */
-+ enable-active-high;
-+ };
-+};
-+
-+&codec {
-+ status = "okay";
-+};
-+
-+&cpu0 {
-+ cpu-supply = <®_dcdc2>;
- };
-
- &ehci0 {
-@@ -109,10 +129,14 @@
- };
- };
-
-+&mmc0_pins_a {
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+};
-+
- &mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>;
-- vmmc-supply = <®_vcc3v3>;
-+ vmmc-supply = <&wifi_reg_on>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-@@ -134,6 +158,13 @@
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
-+ chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 {
-+ allwinner,pins = "PC19";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
- chip_id_det_pin: chip_id_det_pin@0 {
- allwinner,pins = "PG2";
- allwinner,function = "gpio_in";
-@@ -167,6 +198,20 @@
- regulator-always-on;
- };
-
-+®_ldo3 {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vdd-wifi1";
-+ regulator-always-on;
-+};
-+
-+®_ldo4 {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vdd-wifi2";
-+ regulator-always-on;
-+};
-+
- ®_ldo5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
---- a/arch/arm/dts/sun5i.dtsi
-+++ b/arch/arm/dts/sun5i.dtsi
-@@ -44,6 +44,7 @@
-
- #include "skeleton.dtsi"
-
-+#include <dt-bindings/clock/sun4i-a10-pll2.h>
- #include <dt-bindings/dma/sun4i-a10.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
-
-@@ -102,6 +103,15 @@
- clock-output-names = "pll1";
- };
-
-+ pll2: clk@01c20008 {
-+ #clock-cells = <1>;
-+ compatible = "allwinner,sun5i-a13-pll2-clk";
-+ reg = <0x01c20008 0x8>;
-+ clocks = <&osc24M>;
-+ clock-output-names = "pll2-1x", "pll2-2x",
-+ "pll2-4x", "pll2-8x";
-+ };
-+
- pll4: clk@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
-@@ -285,6 +295,14 @@
- clock-output-names = "usb_ohci0", "usb_phy";
- };
-
-+ codec_clk: clk@01c20140 {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun4i-a10-codec-clk";
-+ reg = <0x01c20140 0x4>;
-+ clocks = <&pll2 SUN4I_A10_PLL2_1X>;
-+ clock-output-names = "codec";
-+ };
-+
- mbus_clk: clk@01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-mbus-clk";
-@@ -571,6 +589,19 @@
- status = "disabled";
- };
-
-+ codec: codec@01c22c00 {
-+ #sound-dai-cells = <0>;
-+ compatible = "allwinner,sun4i-a10-codec";
-+ reg = <0x01c22c00 0x40>;
-+ interrupts = <30>;
-+ clocks = <&apb0_gates 0>, <&codec_clk>;
-+ clock-names = "apb", "codec";
-+ dmas = <&dma SUN4I_DMA_NORMAL 19>,
-+ <&dma SUN4I_DMA_NORMAL 19>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ };
-+
- sid: eeprom@01c23800 {
- compatible = "allwinner,sun4i-a10-sid";
- reg = <0x01c23800 0x10>;
---- a/arch/arm/dts/sun6i-a31-colombus.dts
-+++ b/arch/arm/dts/sun6i-a31-colombus.dts
-@@ -60,6 +60,16 @@
- chosen {
- stdout-path = "serial0:115200n8";
- };
-+
-+ i2c_lcd: i2c@0 {
-+ /* The lcd panel i2c interface is hooked up via gpios */
-+ compatible = "i2c-gpio";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c_lcd_pins>;
-+ gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */
-+ <&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */
-+ i2c-gpio,delay-us = <5>;
-+ };
- };
-
- &ehci1 {
-@@ -94,6 +104,13 @@
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
-+
-+ mma8452: mma8452@1d {
-+ compatible = "fsl,mma8452";
-+ reg = <0x1d>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PA9 */
-+ };
- };
-
- &mmc0 {
-@@ -124,6 +141,13 @@
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-+
-+ i2c_lcd_pins: i2c_lcd_pin@0 {
-+ allwinner,pins = "PA23", "PA24";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
- };
-
- ®_usb2_vbus {
---- a/arch/arm/dts/sun6i-a31-hummingbird.dts
-+++ b/arch/arm/dts/sun6i-a31-hummingbird.dts
-@@ -54,6 +54,8 @@
- compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
-
- aliases {
-+ rtc0 = &pcf8563;
-+ rtc1 = &rtc;
- serial0 = &uart0;
- };
-
-@@ -67,13 +69,17 @@
- };
- };
-
-+&cpu0 {
-+ cpu-supply = <®_dcdc3>;
-+};
-+
- &ehci0 {
- status = "okay";
- };
-
- &gmac {
- pinctrl-names = "default";
-- pinctrl-0 = <&gmac_pins_rgmii_a>;
-+ pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>;
- phy = <&phy1>;
- phy-mode = "rgmii";
- snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
-@@ -119,7 +125,7 @@
- &mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
-- vmmc-supply = <&vcc_3v0>;
-+ vmmc-supply = <®_dcdc1>;
- bus-width = <4>;
- cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
- cd-inverted;
-@@ -134,7 +140,7 @@
- &mmc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
-- vmmc-supply = <&vcc_wifi>;
-+ vmmc-supply = <®_aldo1>;
- mmc-pwrseq = <&wifi_pwrseq>;
- bus-width = <4>;
- non-removable;
-@@ -146,6 +152,13 @@
- };
-
- &pio {
-+ gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 {
-+ allwinner,pins = "PA21";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
- mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
- allwinner,pins = "PA8";
- allwinner,function = "gpio_in";
-@@ -164,70 +177,69 @@
- &p2wi {
- status = "okay";
-
-- axp221: pmic@68 {
-+ axp22x: pmic@68 {
- compatible = "x-powers,axp221";
- reg = <0x68>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-- interrupt-controller;
-- #interrupt-cells = <1>;
-- dcdc1-supply = <&vcc_3v0>;
-- dcdc5-supply = <&vcc_dram>;
--
-- regulators {
-- x-powers,dcdc-freq = <3000>;
--
-- vcc_3v0: dcdc1 {
-- regulator-always-on;
-- regulator-min-microvolt = <3000000>;
-- regulator-max-microvolt = <3000000>;
-- regulator-name = "vcc-3v0";
-- };
--
-- vdd_cpu: dcdc2 {
-- regulator-always-on;
-- regulator-min-microvolt = <700000>;
-- regulator-max-microvolt = <1320000>;
-- regulator-name = "vdd-cpu";
-- };
--
-- vdd_gpu: dcdc3 {
-- regulator-always-on;
-- regulator-min-microvolt = <700000>;
-- regulator-max-microvolt = <1320000>;
-- regulator-name = "vdd-gpu";
-- };
--
-- vdd_sys_dll: dcdc4 {
-- regulator-always-on;
-- regulator-min-microvolt = <1100000>;
-- regulator-max-microvolt = <1100000>;
-- regulator-name = "vdd-sys-dll";
-- };
--
-- vcc_dram: dcdc5 {
-- regulator-always-on;
-- regulator-min-microvolt = <1500000>;
-- regulator-max-microvolt = <1500000>;
-- regulator-name = "vcc-dram";
-- };
--
-- vcc_wifi: aldo1 {
-- regulator-min-microvolt = <3300000>;
-- regulator-max-microvolt = <3300000>;
-- regulator-name = "vcc_wifi";
-- };
--
-- avcc: aldo3 {
-- regulator-always-on;
-- regulator-min-microvolt = <3000000>;
-- regulator-max-microvolt = <3000000>;
-- regulator-name = "avcc";
-- };
-- };
- };
- };
-
-+#include "axp22x.dtsi"
-+
-+®_aldo1 {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-wifi";
-+};
-+
-+®_aldo3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <2700000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "avcc";
-+};
-+
-+®_dc5ldo {
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-cpus";
-+};
-+
-+®_dcdc1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "vcc-3v0";
-+};
-+
-+®_dcdc2 {
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-gpu";
-+};
-+
-+®_dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-cpu";
-+};
-+
-+®_dcdc4 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-sys-dll";
-+};
-+
-+®_dcdc5 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-name = "vcc-dram";
-+};
-+
- ®_usb1_vbus {
- gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
- status = "okay";
---- a/arch/arm/dts/sun6i-a31.dtsi
-+++ b/arch/arm/dts/sun6i-a31.dtsi
-@@ -61,7 +61,7 @@
- #size-cells = <1>;
- ranges;
-
-- framebuffer@0 {
-+ simplefb_hdmi: framebuffer@0 {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0-hdmi";
-@@ -69,7 +69,7 @@
- status = "disabled";
- };
-
-- framebuffer@1 {
-+ simplefb_lcd: framebuffer@1 {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0";
-@@ -252,6 +252,20 @@
- compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb1>;
-+ clock-indices = <1>, <5>,
-+ <6>, <8>, <9>,
-+ <10>, <11>, <12>,
-+ <13>, <14>,
-+ <17>, <18>, <19>,
-+ <20>, <21>, <22>,
-+ <23>, <24>, <26>,
-+ <27>, <29>,
-+ <30>, <31>, <32>,
-+ <36>, <37>, <40>,
-+ <43>, <44>, <45>,
-+ <46>, <47>, <50>,
-+ <52>, <55>, <56>,
-+ <57>, <58>;
- clock-output-names = "ahb1_mipidsi", "ahb1_ss",
- "ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
- "ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
-@@ -281,6 +295,9 @@
- compatible = "allwinner,sun6i-a31-apb1-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb1>;
-+ clock-indices = <0>, <4>,
-+ <5>, <12>,
-+ <13>;
- clock-output-names = "apb1_codec", "apb1_digital_mic",
- "apb1_pio", "apb1_daudio0",
- "apb1_daudio1";
-@@ -299,6 +316,10 @@
- compatible = "allwinner,sun6i-a31-apb2-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb2>;
-+ clock-indices = <0>, <1>,
-+ <2>, <3>, <16>,
-+ <17>, <18>, <19>,
-+ <20>, <21>;
- clock-output-names = "apb2_i2c0", "apb2_i2c1",
- "apb2_i2c2", "apb2_i2c3",
- "apb2_uart0", "apb2_uart1",
-@@ -346,6 +367,14 @@
- "mmc3_sample";
- };
-
-+ ss_clk: clk@01c2009c {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
-+ reg = <0x01c2009c 0x4>;
-+ clocks = <&osc24M>, <&pll6 0>;
-+ clock-output-names = "ss";
-+ };
-+
- spi0_clk: clk@01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
-@@ -384,6 +413,9 @@
- compatible = "allwinner,sun6i-a31-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&osc24M>;
-+ clock-indices = <8>, <9>, <10>,
-+ <16>, <17>,
-+ <18>;
- clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
- "usb_ohci0", "usb_ohci1",
- "usb_ohci2";
-@@ -684,6 +716,16 @@
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
-+ mmc3_8bit_emmc_pins: mmc3@1 {
-+ allwinner,pins = "PC6", "PC7", "PC8", "PC9",
-+ "PC10", "PC11", "PC12",
-+ "PC13", "PC14", "PC15",
-+ "PC24";
-+ allwinner,function = "mmc3";
-+ allwinner,drive = <SUN4I_PINCTRL_40_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
- gmac_pins_mii_a: gmac_mii@0 {
- allwinner,pins = "PA0", "PA1", "PA2", "PA3",
- "PA8", "PA9", "PA11",
-@@ -761,6 +803,13 @@
- reg = <0x01c20ca0 0x20>;
- };
-
-+ lradc: lradc@01c22800 {
-+ compatible = "allwinner,sun4i-a10-lradc-keys";
-+ reg = <0x01c22800 0x100>;
-+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-+ status = "disabled";
-+ };
-+
- rtp: rtp@01c25000 {
- compatible = "allwinner,sun6i-a31-ts";
- reg = <0x01c25000 0x100>;
-@@ -907,6 +956,16 @@
- #size-cells = <0>;
- };
-
-+ crypto: crypto-engine@01c15000 {
-+ compatible = "allwinner,sun4i-a10-crypto";
-+ reg = <0x01c15000 0x1000>;
-+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ahb1_gates 5>, <&ss_clk>;
-+ clock-names = "ahb", "mod";
-+ resets = <&ahb1_rst 5>;
-+ reset-names = "ahb";
-+ };
-+
- timer@01c60000 {
- compatible = "allwinner,sun6i-a31-hstimer",
- "allwinner,sun7i-a20-hstimer";
-@@ -1068,7 +1127,7 @@
- resets = <&apb0_rst 0>;
- gpio-controller;
- interrupt-controller;
-- #interrupt-cells = <2>;
-+ #interrupt-cells = <3>;
- #size-cells = <0>;
- #gpio-cells = <3>;
-
---- a/arch/arm/dts/sun6i-a31s-primo81.dts
-+++ b/arch/arm/dts/sun6i-a31s-primo81.dts
-@@ -1,16 +1,57 @@
- /*
-- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
-+ * Copyright 2014 Siarhei Siamashka <siarhei.siamashka@gmail.com>
-+ * Copyright 2015 Karsten Merker <merker@debian.org>
-+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
- *
-- * Minimal dts file for the MSI Primo81 for u-boot only
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
- *
-- * SPDX-License-Identifier: GPL-2.0+ or X11
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
- */
-
- /dts-v1/;
- #include "sun6i-a31s.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-
- / {
-- model = "MSI Primo81";
-+ model = "MSI Primo81 tablet";
- compatible = "msi,primo81", "allwinner,sun6i-a31s";
-
- aliases {
-@@ -22,8 +63,202 @@
- };
- };
-
--&uart0 {
-+&cpu0 {
-+ cpu-supply = <®_dcdc3>;
-+};
-+
-+&ehci0 {
-+ /* rtl8188etv wifi is connected here */
-+ status = "okay";
-+};
-+
-+&i2c0 {
-+ /* pull-ups and device VDDIO use AXP221 DLDO3 */
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins_a>;
-+ status = "failed";
-+};
-+
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins_a>;
-+ status = "okay";
-+
-+ ctp@5d {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <>911_int_primo81>;
-+ compatible = "goodix,gt911";
-+ reg = <0x5d>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
-+ touchscreen-swapped-x-y;
-+ };
-+};
-+
-+&i2c2 {
- pinctrl-names = "default";
-- pinctrl-0 = <&uart0_pins_a>;
-+ pinctrl-0 = <&i2c2_pins_a>;
-+ status = "okay";
-+
-+ accelerometer@1c {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mma8452_int_primo81>;
-+ compatible = "fsl,mma8452";
-+ reg = <0x1c>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
-+ #io-channel-cells = <1>;
-+ };
-+};
-+
-+&lradc {
-+ vref-supply = <®_aldo3>;
-+ status = "okay";
-+
-+ button@158 {
-+ label = "Volume Up";
-+ linux,code = <KEY_VOLUMEUP>;
-+ channel = <0>;
-+ voltage = <158730>;
-+ };
-+
-+ button@349 {
-+ label = "Volume Down";
-+ linux,code = <KEY_VOLUMEDOWN>;
-+ channel = <0>;
-+ voltage = <349206>;
-+ };
-+};
-+
-+&mmc0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>;
-+ vmmc-supply = <®_dcdc1>;
-+ bus-width = <4>;
-+ cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-+ cd-inverted;
-+ status = "okay";
-+};
-+
-+&pio {
-+ gt911_int_primo81: gt911_int_pin@0 {
-+ allwinner,pins = "PA3";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ mma8452_int_primo81: mma8452_int_pin@0 {
-+ allwinner,pins = "PA9";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+
-+ mmc0_cd_pin_primo81: mmc0_cd_pin@0 {
-+ allwinner,pins = "PA8";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+};
-+
-+&p2wi {
-+ status = "okay";
-+
-+ axp22x: pmic@68 {
-+ compatible = "x-powers,axp221";
-+ reg = <0x68>;
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+ };
-+};
-+
-+#include "axp22x.dtsi"
-+
-+®_aldo3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <2700000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "avcc";
-+};
-+
-+®_dc1sw {
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "vcc-lcd";
-+};
-+
-+®_dc5ldo {
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-cpus"; /* This is an educated guess */
-+};
-+
-+®_dcdc1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "vcc-3v0";
-+};
-+
-+®_dcdc2 {
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-gpu";
-+};
-+
-+®_dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-cpu";
-+};
-+
-+®_dcdc4 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-sys-dll";
-+};
-+
-+®_dcdc5 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-name = "vcc-dram";
-+};
-+
-+®_dldo1 {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-wifi";
-+};
-+
-+®_dldo3 {
-+ regulator-min-microvolt = <2800000>;
-+ regulator-max-microvolt = <2800000>;
-+ regulator-name = "vddio-csi";
-+};
-+
-+®_eldo3 {
-+ regulator-min-microvolt = <1080000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-mipi-bridge";
-+};
-+
-+&simplefb_lcd {
-+ vcc-lcd-supply = <®_dc1sw>;
-+ vdd-mipi-bridge-supply = <®_eldo3>;
-+};
-+
-+&usb_otg {
-+ /* otg support requires support for AXP221 usb-power-supply and GPIO */
-+ dr_mode = "host";
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ usb1_vbus-supply = <®_dldo1>;
- status = "okay";
- };
---- /dev/null
-+++ b/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi
-@@ -0,0 +1,142 @@
-+/*
-+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun6i-a31s.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+
-+/ {
-+ model = "Sinlinx SinA31s Core Board";
-+ compatible = "sinlinx,sina31s", "allwinner,sun6i-a31s";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+};
-+
-+&cpu0 {
-+ cpu-supply = <®_dcdc3>;
-+};
-+
-+/* eMMC on core board */
-+&mmc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc3_8bit_emmc_pins>;
-+ vmmc-supply = <®_dcdc1>;
-+ vqmmc-supply = <®_dcdc1>;
-+ bus-width = <8>;
-+ non-removable;
-+ cap-mmc-hw-reset;
-+ status = "okay";
-+};
-+
-+/* AXP221s PMIC on core board */
-+&p2wi {
-+ status = "okay";
-+
-+ axp22x: pmic@68 {
-+ compatible = "x-powers,axp221";
-+ reg = <0x68>;
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+ };
-+};
-+
-+#include "axp22x.dtsi"
-+
-+®_aldo3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <2700000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "avcc";
-+};
-+
-+®_dc5ldo {
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-cpus";
-+};
-+
-+®_dcdc1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "vcc-3v0";
-+};
-+
-+®_dcdc2 {
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-gpu";
-+};
-+
-+®_dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-cpu";
-+};
-+
-+®_dcdc4 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-sys-dll";
-+};
-+
-+®_dcdc5 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-name = "vcc-dram";
-+};
-+
-+/* UART0 pads available on core board */
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+};
-+
---- /dev/null
-+++ b/arch/arm/dts/sun6i-a31s-sina31s.dts
-@@ -0,0 +1,153 @@
-+/*
-+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/* The SinA31s development board has the SinA31s core board soldered on */
-+#include "sun6i-a31s-sina31s-core.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "Sinlinx SinA31s Development Board";
-+ compatible = "sinlinx,sina31s-sdk", "allwinner,sun6i-a31s";
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&led_pin_sina31s>;
-+
-+ status {
-+ label = "sina31s:status:usr";
-+ gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
-+ };
-+ };
-+};
-+
-+&ehci0 {
-+ /* USB 2.0 4 port hub IC */
-+ status = "okay";
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&gmac {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac_pins_mii_a>;
-+ phy = <&phy1>;
-+ phy-mode = "mii";
-+ phy-supply = <®_dldo1>;
-+ status = "okay";
-+
-+ phy1: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+};
-+
-+&ir {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ir_pins_a>;
-+ status = "okay";
-+};
-+
-+&lradc {
-+ vref-supply = <®_aldo3>;
-+ status = "okay";
-+
-+ button@158 {
-+ label = "Volume Up";
-+ linux,code = <KEY_VOLUMEUP>;
-+ channel = <0>;
-+ voltage = <158730>;
-+ };
-+
-+ button@349 {
-+ label = "Volume Down";
-+ linux,code = <KEY_VOLUMEDOWN>;
-+ channel = <0>;
-+ voltage = <349206>;
-+ };
-+};
-+
-+&mmc0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>;
-+ vmmc-supply = <®_dcdc1>;
-+ bus-width = <4>;
-+ cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
-+ cd-inverted;
-+ status = "okay";
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+&pio {
-+ led_pin_sina31s: led_pin@0 {
-+ allwinner,pins = "PH13";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ mmc0_cd_pin_sina31s: mmc0_cd_pin@0 {
-+ allwinner,pins = "PA4";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+};
-+
-+®_dldo1 {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-gmac-phy";
-+};
-+
-+&usbphy {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
-@@ -0,0 +1,205 @@
-+/*
-+ * Copyright 2015 Lawrence Yu <lyu@micile.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun6i-a31s.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+
-+/ {
-+ model = "Yones TopTech BS1078 v2 Tablet";
-+ compatible = "yones-toptech,bs1078-v2", "allwinner,sun6i-a31s";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ i2c1 = &i2c1;
-+ i2c2 = &i2c2;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+};
-+
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins_a>;
-+ status = "okay";
-+};
-+
-+&i2c2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c2_pins_a>;
-+ status = "okay";
-+};
-+
-+&ehci0 {
-+ status = "okay";
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&ohci0 {
-+ status = "okay";
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+&pio {
-+ mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 {
-+ allwinner,pins = "PA8";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+};
-+
-+&mmc0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>;
-+ vmmc-supply = <®_vcc3v0>;
-+ bus-width = <4>;
-+ cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-+ cd-inverted;
-+ status = "okay";
-+};
-+
-+&mmc0_pins_a {
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+};
-+
-+&p2wi {
-+ status = "okay";
-+
-+ axp22x: pmic@68 {
-+ compatible = "x-powers,axp221";
-+ reg = <0x68>;
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+ };
-+};
-+
-+#include "axp22x.dtsi"
-+
-+®_aldo3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <2700000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "avcc";
-+};
-+
-+®_dc1sw {
-+ regulator-name = "vcc-lcd-usb2";
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+};
-+
-+®_dc5ldo {
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-cpus";
-+};
-+
-+®_dcdc1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "vcc-3v0";
-+};
-+
-+®_dcdc2 {
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-gpu";
-+};
-+
-+®_dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-cpu";
-+};
-+
-+®_dcdc4 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <1320000>;
-+ regulator-name = "vdd-sys-dll";
-+};
-+
-+®_dcdc5 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-name = "vcc-dram";
-+};
-+
-+®_dldo1 {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-wifi";
-+};
-+
-+/* Voltage source for I2C pullup resistors for I2C Bus 0 */
-+®_dldo3 {
-+ regulator-min-microvolt = <2800000>;
-+ regulator-max-microvolt = <2800000>;
-+ regulator-name = "vddio-csi";
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ usb1_vbus-supply = <®_dldo1>;
-+ usb2_vbus-supply = <®_dc1sw>;
-+ status = "okay";
-+};
---- a/arch/arm/dts/sun7i-a20-bananapi.dts
-+++ b/arch/arm/dts/sun7i-a20-bananapi.dts
-@@ -92,6 +92,24 @@
- status = "okay";
- };
-
-+&codec {
-+ status = "okay";
-+};
-+
-+&cpu0 {
-+ cpu-supply = <®_dcdc2>;
-+ operating-points = <
-+ /* kHz uV */
-+ 960000 1400000
-+ 912000 1400000
-+ 864000 1350000
-+ 720000 1250000
-+ 528000 1150000
-+ 312000 1100000
-+ 144000 1050000
-+ >;
-+};
-+
- &ehci0 {
- status = "okay";
- };
-@@ -119,13 +137,9 @@
- status = "okay";
-
- axp209: pmic@34 {
-- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
--
-- interrupt-controller;
-- #interrupt-cells = <1>;
- };
- };
-
-@@ -159,7 +173,18 @@
- status = "okay";
- };
-
-+&otg_sram {
-+ status = "okay";
-+};
-+
- &pio {
-+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+ allwinner,pins = "PH4";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+
- mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
- allwinner,pins = "PH10";
- allwinner,function = "gpio_in";
-@@ -182,6 +207,37 @@
- };
- };
-
-+#include "axp209.dtsi"
-+
-+®_dcdc2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-cpu";
-+};
-+
-+®_dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-int-dll";
-+};
-+
-+®_ldo1 {
-+ regulator-name = "vdd-rtc";
-+};
-+
-+®_ldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "avcc";
-+};
-+
-+®_usb0_vbus {
-+ status = "okay";
-+};
-+
- ®_usb1_vbus {
- status = "okay";
- };
-@@ -216,7 +272,21 @@
- status = "okay";
- };
-
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
-+&usb_power_supply {
-+ status = "okay";
-+};
-+
- &usbphy {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb0_id_detect_pin>;
-+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+ usb0_vbus_power-supply = <&usb_power_supply>;
-+ usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
---- a/arch/arm/dts/sun7i-a20-cubieboard2.dts
-+++ b/arch/arm/dts/sun7i-a20-cubieboard2.dts
-@@ -84,6 +84,10 @@
- status = "okay";
- };
-
-+&codec {
-+ status = "okay";
-+};
-+
- &cpu0 {
- cpu-supply = <®_dcdc2>;
- };
-@@ -150,6 +154,10 @@
- status = "okay";
- };
-
-+&otg_sram {
-+ status = "okay";
-+};
-+
- &pio {
- led_pins_cubieboard2: led_pins@0 {
- allwinner,pins = "PH20", "PH21";
-@@ -157,12 +165,24 @@
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-+
-+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+ allwinner,pins = "PH4";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
- };
-
- ®_ahci_5v {
- status = "okay";
- };
-
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
- #include "axp209.dtsi"
-
- ®_dcdc2 {
-@@ -205,6 +225,9 @@
- };
-
- &usbphy {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb0_id_detect_pin>;
-+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
---- a/arch/arm/dts/sun7i-a20-cubietruck.dts
-+++ b/arch/arm/dts/sun7i-a20-cubietruck.dts
-@@ -101,6 +101,10 @@
- status = "okay";
- };
-
-+&codec {
-+ status = "okay";
-+};
-+
- &cpu0 {
- cpu-supply = <®_dcdc2>;
- };
---- /dev/null
-+++ b/arch/arm/dts/sun7i-a20-icnova-swac.dts
-@@ -0,0 +1,169 @@
-+/*
-+ * Copyright 2015 Stefan Roese <sr@denx.de>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun7i-a20.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+
-+/ {
-+ model = "ICnova-A20 SWAC";
-+ compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+};
-+
-+&cpu0 {
-+ cpu-supply = <®_dcdc2>;
-+};
-+
-+&ehci0 {
-+ status = "okay";
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&gmac {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac_pins_mii_a>;
-+ phy = <&phy1>;
-+ phy-mode = "mii";
-+ status = "okay";
-+
-+ phy1: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+};
-+
-+&i2c0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins_a>;
-+ status = "okay";
-+
-+ axp209: pmic@34 {
-+ reg = <0x34>;
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+ };
-+};
-+
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins_a>;
-+ status = "okay";
-+};
-+
-+&mmc0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-+ vmmc-supply = <®_vcc3v3>;
-+ bus-width = <4>;
-+ cd-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; /* PI5 */
-+ cd-inverted;
-+ status = "okay";
-+};
-+
-+&ohci0 {
-+ status = "okay";
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+#include "axp209.dtsi"
-+
-+®_dcdc2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-cpu";
-+};
-+
-+®_dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-int-dll";
-+};
-+
-+®_ldo1 {
-+ regulator-name = "vdd-rtc";
-+};
-+
-+®_ldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "avcc";
-+};
-+
-+®_usb1_vbus {
-+ status = "okay";
-+};
-+
-+®_usb2_vbus {
-+ status = "okay";
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ usb1_vbus-supply = <®_usb1_vbus>;
-+ usb2_vbus-supply = <®_usb2_vbus>;
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/dts/sun7i-a20-itead-ibox.dts
-@@ -0,0 +1,125 @@
-+/*
-+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun7i-a20.dtsi"
-+#include "sunxi-itead-core-common.dtsi"
-+
-+/ {
-+ model = "Itead Ibox A20";
-+ compatible = "itead,itead-ibox-a20", "allwinner,sun7i-a20";
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&led_pins_itead_core>;
-+
-+ green {
-+ label = "itead_core:green:usr";
-+ gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
-+ default-state = "on";
-+ };
-+
-+ blue {
-+ label = "itead_core:blue:usr";
-+ gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
-+ default-state = "on";
-+ };
-+ };
-+};
-+
-+&ahci {
-+ target-supply = <®_ahci_5v>;
-+ status = "okay";
-+};
-+
-+&codec {
-+ status = "okay";
-+};
-+
-+&gmac {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac_pins_mii_a>;
-+ phy = <&phy1>;
-+ phy-mode = "mii";
-+ status = "okay";
-+
-+ phy1: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+};
-+
-+&i2c0 {
-+ axp209: pmic@34 {
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+ };
-+};
-+
-+&ir0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ir0_rx_pins_a>;
-+ status = "okay";
-+};
-+
-+&mmc0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-+ vmmc-supply = <®_vcc3v3>;
-+ bus-width = <4>;
-+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-+ cd-inverted;
-+ status = "okay";
-+};
-+
-+&pio {
-+ led_pins_itead_core: led_pins@0 {
-+ allwinner,pins = "PH20","PH21";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+};
-+
-+®_ahci_5v {
-+ status = "okay";
-+};
---- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
-+++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
-@@ -97,16 +97,6 @@
-
- &cpu0 {
- cpu-supply = <®_dcdc2>;
-- operating-points = <
-- /* kHz uV */
-- 960000 1400000
-- 912000 1400000
-- 864000 1350000
-- 720000 1250000
-- 528000 1150000
-- 312000 1100000
-- 144000 1050000
-- >;
- };
-
- &ehci0 {
---- a/arch/arm/dts/sun7i-a20-mk808c.dts
-+++ b/arch/arm/dts/sun7i-a20-mk808c.dts
-@@ -53,6 +53,7 @@
-
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-
- / {
- model = "mk808c";
-@@ -68,6 +69,10 @@
- };
- };
-
-+&codec {
-+ status = "okay";
-+};
-+
- &ehci0 {
- status = "okay";
- };
-@@ -121,6 +126,30 @@
- status = "okay";
- };
-
-+&otg_sram {
-+ status = "okay";
-+};
-+
-+&pio {
-+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+ allwinner,pins = "PH4";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-+ allwinner,pins = "PH5";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+};
-+
-+®_usb0_vbus {
-+ status = "okay";
-+};
-+
- ®_usb1_vbus {
- status = "okay";
- };
-@@ -141,7 +170,17 @@
- status = "okay";
- };
-
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
- &usbphy {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-+ usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-+ usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
---- a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
-+++ b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
-@@ -1,5 +1,6 @@
- /*
- * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
-+ * Copyright 2015 - Karsten Merker <merker@debian.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
-@@ -45,6 +46,7 @@
- #include "sunxi-common-regulators.dtsi"
-
- #include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
-
-@@ -71,14 +73,6 @@
- default-state = "on";
- };
- };
--
-- reg_axp_ipsout: axp_ipsout {
-- compatible = "regulator-fixed";
-- regulator-name = "axp-ipsout";
-- regulator-min-microvolt = <5000000>;
-- regulator-max-microvolt = <5000000>;
-- regulator-always-on;
-- };
- };
-
- &ahci {
-@@ -94,6 +88,10 @@
- status = "okay";
- };
-
-+&codec {
-+ status = "okay";
-+};
-+
- &gmac {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
-@@ -118,10 +116,58 @@
- };
- };
-
--&i2c1 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&i2c1_pins_a>;
-+&lradc {
-+ vref-supply = <®_vcc3v0>;
- status = "okay";
-+
-+ button@190 {
-+ label = "Volume Up";
-+ linux,code = <KEY_VOLUMEUP>;
-+ channel = <0>;
-+ voltage = <190000>;
-+ };
-+
-+ button@390 {
-+ label = "Volume Down";
-+ linux,code = <KEY_VOLUMEDOWN>;
-+ channel = <0>;
-+ voltage = <390000>;
-+ };
-+
-+ button@600 {
-+ label = "Menu";
-+ linux,code = <KEY_MENU>;
-+ channel = <0>;
-+ voltage = <600000>;
-+ };
-+
-+ button@800 {
-+ label = "Search";
-+ linux,code = <KEY_SEARCH>;
-+ channel = <0>;
-+ voltage = <800000>;
-+ };
-+
-+ button@980 {
-+ label = "Home";
-+ linux,code = <KEY_HOMEPAGE>;
-+ channel = <0>;
-+ voltage = <980000>;
-+ };
-+
-+ button@1180 {
-+ label = "Esc";
-+ linux,code = <KEY_ESC>;
-+ channel = <0>;
-+ voltage = <1180000>;
-+ };
-+
-+ button@1400 {
-+ label = "Enter";
-+ linux,code = <KEY_ENTER>;
-+ channel = <0>;
-+ voltage = <1400000>;
-+ };
- };
-
- &mmc0 {
-@@ -134,6 +180,16 @@
- status = "okay";
- };
-
-+&mmc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olimex_som_evb>;
-+ vmmc-supply = <®_vcc3v3>;
-+ bus-width = <4>;
-+ cd-gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
-+ cd-inverted;
-+ status = "okay";
-+};
-+
- &ohci0 {
- status = "okay";
- };
-@@ -161,15 +217,22 @@
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
-+ mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 {
-+ allwinner,pins = "PH0";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+
- usb0_id_detect_pin: usb0_id_detect_pin@0 {
-- allwinner,pins = "PH04";
-+ allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-- allwinner,pins = "PH05";
-+ allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-@@ -187,7 +250,7 @@
- ®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
-- regulator-max-microvolt = <1425000>;
-+ regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-cpu";
- };
-
-@@ -235,8 +298,8 @@
- &usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-- usb0_id_det-gpios = <&pio 7 04 GPIO_ACTIVE_HIGH>; /* PH04 */
-- usb0_vbus_det-gpios = <&pio 7 05 GPIO_ACTIVE_HIGH>; /* PH05 */
-+ usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */
-+ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
---- a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
-+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
-@@ -117,6 +117,18 @@
- };
- };
-
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins_a>;
-+ status = "okay";
-+
-+ eeprom: eeprom@50 {
-+ compatible = "atmel,24c16";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+};
-+
- &mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
---- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
-+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
-@@ -170,6 +170,12 @@
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
-+
-+ eeprom: eeprom@50 {
-+ compatible = "atmel,24c16";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
- };
-
- &mmc0 {
-@@ -190,6 +196,10 @@
- status = "okay";
- };
-
-+&otg_sram {
-+ status = "okay";
-+};
-+
- &pio {
- ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
- allwinner,pins = "PC3";
-@@ -204,6 +214,27 @@
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-+
-+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+ allwinner,pins = "PH4";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+
-+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-+ allwinner,pins = "PH5";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
-+ };
-+
-+ usb0_vbus_pin_lime2: usb0_vbus_pin@0 {
-+ allwinner,pins = "PC17";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
- };
-
- ®_ahci_5v {
-@@ -212,6 +243,12 @@
- status = "okay";
- };
-
-+®_usb0_vbus {
-+ pinctrl-0 = <&usb0_vbus_pin_lime2>;
-+ gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
-+ status = "okay";
-+};
-+
- ®_usb1_vbus {
- status = "okay";
- };
-@@ -226,7 +263,17 @@
- status = "okay";
- };
-
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
- &usbphy {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+ usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-+ usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
---- a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
-+++ b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
-@@ -125,6 +125,12 @@
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
-+
-+ eeprom: eeprom@50 {
-+ compatible = "atmel,24c16";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
- };
-
- &i2c2 {
---- a/arch/arm/dts/sun7i-a20-orangepi-mini.dts
-+++ b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
-@@ -95,6 +95,10 @@
- status = "okay";
- };
-
-+&codec {
-+ status = "okay";
-+};
-+
- &ehci0 {
- status = "okay";
- };
-@@ -156,7 +160,18 @@
- status = "okay";
- };
-
-+&otg_sram {
-+ status = "okay";
-+};
-+
- &pio {
-+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+ allwinner,pins = "PH4";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+
- mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
- allwinner,pins = "PH10";
- allwinner,function = "gpio_in";
-@@ -225,6 +240,10 @@
- regulator-name = "avcc";
- };
-
-+®_usb0_vbus {
-+ status = "okay";
-+};
-+
- ®_usb1_vbus {
- pinctrl-0 = <&usb1_vbus_pin_bananapro>;
- gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
-@@ -243,7 +262,21 @@
- status = "okay";
- };
-
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
-+&usb_power_supply {
-+ status = "okay";
-+};
-+
- &usbphy {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb0_id_detect_pin>;
-+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+ usb0_vbus_power-supply = <&usb_power_supply>;
-+ usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
---- a/arch/arm/dts/sun7i-a20-orangepi.dts
-+++ b/arch/arm/dts/sun7i-a20-orangepi.dts
-@@ -141,7 +141,18 @@
- status = "okay";
- };
-
-+&otg_sram {
-+ status = "okay";
-+};
-+
- &pio {
-+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+ allwinner,pins = "PH4";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+
- mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
- allwinner,pins = "PH10";
- allwinner,function = "gpio_in";
-@@ -203,6 +214,10 @@
- regulator-name = "avcc";
- };
-
-+®_usb0_vbus {
-+ status = "okay";
-+};
-+
- ®_usb1_vbus {
- pinctrl-0 = <&usb1_vbus_pin_bananapro>;
- gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
-@@ -221,7 +236,21 @@
- status = "okay";
- };
-
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
-+&usb_power_supply {
-+ status = "okay";
-+};
-+
- &usbphy {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb0_id_detect_pin>;
-+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+ usb0_vbus_power-supply = <&usb_power_supply>;
-+ usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
---- a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
-+++ b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
-@@ -82,6 +82,14 @@
- status = "okay";
- };
-
-+&codec {
-+ status = "okay";
-+};
-+
-+&cpu0 {
-+ cpu-supply = <®_dcdc2>;
-+};
-+
- &ehci0 {
- status = "okay";
- };
-@@ -108,13 +116,9 @@
- status = "okay";
-
- axp209: pmic@34 {
-- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
--
-- interrupt-controller;
-- #interrupt-cells = <1>;
- };
- };
-
-@@ -142,6 +146,10 @@
- status = "okay";
- };
-
-+&otg_sram {
-+ status = "okay";
-+};
-+
- &pio {
- ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
- allwinner,pins = "PH2";
-@@ -157,8 +165,15 @@
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
-+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+ allwinner,pins = "PH4";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+
- usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
-- allwinner,pins = "PH11";
-+ allwinner,pins = "PD2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-@@ -171,13 +186,37 @@
- status = "okay";
- };
-
--®_usb1_vbus {
-- pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
-- gpio = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
-- status = "okay";
-+#include "axp209.dtsi"
-+
-+®_dcdc2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-cpu";
-+};
-+
-+®_dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-int-pll";
-+};
-+
-+®_ldo1 {
-+ regulator-name = "vdd-rtc";
-+};
-+
-+®_ldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "avcc";
- };
-
--®_usb2_vbus {
-+/* A single regulator (U24) powers both USB host ports. */
-+®_usb1_vbus {
-+ pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
-+ gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
- status = "okay";
- };
-
-@@ -187,8 +226,16 @@
- status = "okay";
- };
-
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
- &usbphy {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb0_id_detect_pin>;
-+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb1_vbus-supply = <®_usb1_vbus>;
-- usb2_vbus-supply = <®_usb2_vbus>;
-+ usb2_vbus-supply = <®_usb1_vbus>;
- status = "okay";
- };
---- a/arch/arm/dts/sun7i-a20-pcduino3.dts
-+++ b/arch/arm/dts/sun7i-a20-pcduino3.dts
-@@ -111,6 +111,14 @@
- allwinner,pins = "PH2";
- };
-
-+&codec {
-+ status = "okay";
-+};
-+
-+&cpu0 {
-+ cpu-supply = <®_dcdc2>;
-+};
-+
- &ehci0 {
- status = "okay";
- };
-@@ -137,16 +145,14 @@
- status = "okay";
-
- axp209: pmic@34 {
-- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
--
-- interrupt-controller;
-- #interrupt-cells = <1>;
- };
- };
-
-+#include "axp209.dtsi"
-+
- &ir0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pins_a>;
-@@ -171,6 +177,10 @@
- status = "okay";
- };
-
-+&otg_sram {
-+ status = "okay";
-+};
-+
- &pio {
- led_pins_pcduino3: led_pins@0 {
- allwinner,pins = "PH15", "PH16";
-@@ -185,6 +195,13 @@
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-+
-+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+ allwinner,pins = "PH4";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
- };
-
- ®_ahci_5v {
-@@ -192,6 +209,31 @@
- status = "okay";
- };
-
-+®_dcdc2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-cpu";
-+};
-+
-+®_dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-int-pll";
-+};
-+
-+®_ldo1 {
-+ regulator-name = "vdd-rtc";
-+};
-+
-+®_ldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "avcc";
-+};
-+
- ®_usb1_vbus {
- status = "okay";
- };
-@@ -206,7 +248,15 @@
- status = "okay";
- };
-
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
- &usbphy {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb0_id_detect_pin>;
-+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
---- a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
-+++ b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
-@@ -48,6 +48,7 @@
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/input/input.h>
- #include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/pwm/pwm.h>
-
- / {
- model = "Wexler TAB7200";
-@@ -57,11 +58,28 @@
- serial0 = &uart0;
- };
-
-+ backlight {
-+ compatible = "pwm-backlight";
-+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-+ default-brightness-level = <8>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&bl_enable_pin>;
-+ enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
-+ };
-+
- chosen {
- stdout-path = "serial0:115200n8";
- };
- };
-
-+&codec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&codec_pa_pin>;
-+ allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
-+ status = "okay";
-+};
-+
- &cpu0 {
- cpu-supply = <®_dcdc2>;
- };
-@@ -86,6 +104,8 @@
- };
- };
-
-+#include "axp209.dtsi"
-+
- &i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
-@@ -96,6 +116,18 @@
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
-+
-+ gt911: touchscreen@5d {
-+ compatible = "goodix,gt911";
-+ reg = <0x5d>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ts_reset_pin>;
-+ irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */
-+ reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */
-+ touchscreen-swapped-x-y;
-+ };
- };
-
- &lradc {
-@@ -135,7 +167,45 @@
- status = "okay";
- };
-
--#include "axp209.dtsi"
-+&otg_sram {
-+ status = "okay";
-+};
-+
-+&pio {
-+ bl_enable_pin: bl_enable_pin@0 {
-+ allwinner,pins = "PH7";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ codec_pa_pin: codec_pa_pin@0 {
-+ allwinner,pins = "PH15";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ ts_reset_pin: ts_reset_pin@0 {
-+ allwinner,pins = "PB13";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+ allwinner,pins = "PH4";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+};
-+
-+&pwm {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pwm0_pins_a>;
-+ status = "okay";
-+};
-
- ®_dcdc2 {
- regulator-always-on;
-@@ -162,6 +232,10 @@
- regulator-name = "avcc";
- };
-
-+®_usb0_vbus {
-+ status = "okay";
-+};
-+
- ®_usb1_vbus {
- status = "okay";
- };
-@@ -176,7 +250,21 @@
- status = "okay";
- };
-
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
-+&usb_power_supply {
-+ status = "okay";
-+};
-+
- &usbphy {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb0_id_detect_pin>;
-+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+ usb0_vbus_power-supply = <&usb_power_supply>;
-+ usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
---- a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
-+++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
-@@ -1,13 +1,52 @@
- /*
-- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
-+ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
- *
-- * Minimal dts file for the Wits Pro A20 DKT for u-boot only
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
- *
-- * SPDX-License-Identifier: GPL-2.0+ or X11
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
- */
-
- /dts-v1/;
- #include "sun7i-a20.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
-
- / {
- model = "Wits Pro A20 DKT";
-@@ -20,6 +59,17 @@
- chosen {
- stdout-path = "serial0:115200n8";
- };
-+
-+ mmc3_pwrseq: mmc3_pwrseq {
-+ compatible = "mmc-pwrseq-simple";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>;
-+ reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
-+ };
-+};
-+
-+&cpu0 {
-+ cpu-supply = <®_dcdc2>;
- };
-
- &ehci0 {
-@@ -42,6 +92,60 @@
- };
- };
-
-+&i2c0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins_a>;
-+ status = "okay";
-+
-+ axp209: pmic@34 {
-+ reg = <0x34>;
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+ };
-+};
-+
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins_a>;
-+ status = "okay";
-+};
-+
-+&i2c2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c2_pins_a>;
-+ status = "okay";
-+};
-+
-+#include "axp209.dtsi"
-+
-+&mmc0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-+ vmmc-supply = <®_vcc3v3>;
-+ bus-width = <4>;
-+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-+ cd-inverted;
-+ status = "okay";
-+};
-+
-+&mmc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc3_pins_a>;
-+ vmmc-supply = <®_vcc3v3>;
-+ mmc-pwrseq = <&mmc3_pwrseq>;
-+ bus-width = <4>;
-+ non-removable;
-+ status = "okay";
-+
-+ brcmf: bcrmf@1 {
-+ reg = <1>;
-+ compatible = "brcm,bcm4329-fmac";
-+ interrupt-parent = <&pio>;
-+ interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
-+ interrupt-names = "host-wake";
-+ };
-+};
-+
- &ohci0 {
- status = "okay";
- };
-@@ -50,8 +154,85 @@
- status = "okay";
- };
-
-+&otg_sram {
-+ status = "okay";
-+};
-+
-+&pio {
-+ vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 {
-+ allwinner,pins = "PH9";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
-+ allwinner,pins = "PH4";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+};
-+
-+®_dcdc2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1450000>;
-+ regulator-name = "vdd-cpu";
-+};
-+
-+®_dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-int-dll";
-+};
-+
-+®_ldo1 {
-+ regulator-name = "vdd-rtc";
-+};
-+
-+®_ldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "avcc";
-+};
-+
-+®_usb0_vbus {
-+ status = "okay";
-+};
-+
-+®_usb1_vbus {
-+ status = "okay";
-+};
-+
-+®_usb2_vbus {
-+ status = "okay";
-+};
-+
- &uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-+
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
-+&usb_power_supply {
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb0_id_detect_pin>;
-+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-+ usb0_vbus_power-supply = <&usb_power_supply>;
-+ usb0_vbus-supply = <®_usb0_vbus>;
-+ usb1_vbus-supply = <®_usb1_vbus>;
-+ usb2_vbus-supply = <®_usb2_vbus>;
-+ status = "okay";
-+};
---- a/arch/arm/dts/sun7i-a20.dtsi
-+++ b/arch/arm/dts/sun7i-a20.dtsi
-@@ -47,6 +47,7 @@
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/thermal/thermal.h>
-
-+#include <dt-bindings/clock/sun4i-a10-pll2.h>
- #include <dt-bindings/dma/sun4i-a10.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
-
-@@ -67,7 +68,7 @@
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
-- <&ahb_gates 44>;
-+ <&ahb_gates 44>, <&dram_gates 26>;
- status = "disabled";
- };
-
-@@ -75,7 +76,8 @@
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0";
-- clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
-+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
-+ <&dram_gates 26>;
- status = "disabled";
- };
-
-@@ -84,7 +86,7 @@
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0-tve0";
- clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
-- <&ahb_gates 44>;
-+ <&ahb_gates 44>, <&dram_gates 26>;
- status = "disabled";
- };
- };
-@@ -107,7 +109,7 @@
- 720000 1200000
- 528000 1100000
- 312000 1000000
-- 144000 900000
-+ 144000 1000000
- >;
- #cooling-cells = <2>;
- cooling-min-level = <0>;
-@@ -199,6 +201,15 @@
- clock-output-names = "pll1";
- };
-
-+ pll2: clk@01c20008 {
-+ #clock-cells = <1>;
-+ compatible = "allwinner,sun4i-a10-pll2-clk";
-+ reg = <0x01c20008 0x8>;
-+ clocks = <&osc24M>;
-+ clock-output-names = "pll2-1x", "pll2-2x",
-+ "pll2-4x", "pll2-8x";
-+ };
-+
- pll4: clk@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-pll4-clk";
-@@ -267,6 +278,19 @@
- compatible = "allwinner,sun7i-a20-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb>;
-+ clock-indices = <0>, <1>,
-+ <2>, <3>, <4>,
-+ <5>, <6>, <7>, <8>,
-+ <9>, <10>, <11>, <12>,
-+ <13>, <14>, <16>,
-+ <17>, <18>, <20>, <21>,
-+ <22>, <23>, <25>,
-+ <28>, <32>, <33>, <34>,
-+ <35>, <36>, <37>, <40>,
-+ <41>, <42>, <43>,
-+ <44>, <45>, <46>,
-+ <47>, <49>, <50>,
-+ <52>;
- clock-output-names = "ahb_usb0", "ahb_ehci0",
- "ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
- "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
-@@ -295,6 +319,10 @@
- compatible = "allwinner,sun7i-a20-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb0>;
-+ clock-indices = <0>, <1>,
-+ <2>, <3>, <4>,
-+ <5>, <6>, <7>,
-+ <8>, <10>;
- clock-output-names = "apb0_codec", "apb0_spdif",
- "apb0_ac97", "apb0_iis0", "apb0_iis1",
- "apb0_pio", "apb0_ir0", "apb0_ir1",
-@@ -314,6 +342,12 @@
- compatible = "allwinner,sun7i-a20-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb1>;
-+ clock-indices = <0>, <1>,
-+ <2>, <3>, <4>,
-+ <5>, <6>, <7>,
-+ <15>, <16>, <17>,
-+ <18>, <19>, <20>,
-+ <21>, <22>, <23>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_i2c3", "apb1_can",
- "apb1_scr", "apb1_ps20", "apb1_ps21",
-@@ -442,6 +476,14 @@
- clock-output-names = "ir1";
- };
-
-+ keypad_clk: clk@01c200c4 {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
-+ reg = <0x01c200c4 0x4>;
-+ clocks = <&osc24M>;
-+ clock-output-names = "keypad";
-+ };
-+
- usb_clk: clk@01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
-@@ -460,6 +502,48 @@
- clock-output-names = "spi3";
- };
-
-+ dram_gates: clk@01c20100 {
-+ #clock-cells = <1>;
-+ compatible = "allwinner,sun4i-a10-dram-gates-clk";
-+ reg = <0x01c20100 0x4>;
-+ clocks = <&pll5 0>;
-+ clock-indices = <0>,
-+ <1>, <2>,
-+ <3>,
-+ <4>,
-+ <5>, <6>,
-+ <15>,
-+ <24>, <25>,
-+ <26>, <27>,
-+ <28>, <29>;
-+ clock-output-names = "dram_ve",
-+ "dram_csi0", "dram_csi1",
-+ "dram_ts",
-+ "dram_tvd",
-+ "dram_tve0", "dram_tve1",
-+ "dram_output",
-+ "dram_de_fe1", "dram_de_fe0",
-+ "dram_de_be0", "dram_de_be1",
-+ "dram_de_mp", "dram_ace";
-+ };
-+
-+ ve_clk: clk@01c2013c {
-+ #clock-cells = <0>;
-+ #reset-cells = <0>;
-+ compatible = "allwinner,sun4i-a10-ve-clk";
-+ reg = <0x01c2013c 0x4>;
-+ clocks = <&pll4>;
-+ clock-output-names = "ve";
-+ };
-+
-+ codec_clk: clk@01c20140 {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun4i-a10-codec-clk";
-+ reg = <0x01c20140 0x4>;
-+ clocks = <&pll2 SUN4I_A10_PLL2_1X>;
-+ clock-output-names = "codec";
-+ };
-+
- mbus_clk: clk@01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-mbus-clk";
-@@ -744,6 +828,14 @@
- status = "disabled";
- };
-
-+ crypto: crypto-engine@01c15000 {
-+ compatible = "allwinner,sun4i-a10-crypto";
-+ reg = <0x01c15000 0x1000>;
-+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ahb_gates 5>, <&ss_clk>;
-+ clock-names = "ahb", "mod";
-+ };
-+
- spi2: spi@01c17000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c17000 0x1000>;
-@@ -1159,6 +1251,19 @@
- status = "disabled";
- };
-
-+ codec: codec@01c22c00 {
-+ #sound-dai-cells = <0>;
-+ compatible = "allwinner,sun7i-a20-codec";
-+ reg = <0x01c22c00 0x40>;
-+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&apb0_gates 0>, <&codec_clk>;
-+ clock-names = "apb", "codec";
-+ dmas = <&dma SUN4I_DMA_NORMAL 19>,
-+ <&dma SUN4I_DMA_NORMAL 19>;
-+ dma-names = "rx", "tx";
-+ status = "disabled";
-+ };
-+
- sid: eeprom@01c23800 {
- compatible = "allwinner,sun7i-a20-sid";
- reg = <0x01c23800 0x200>;
---- a/arch/arm/dts/sun8i-a23-a33.dtsi
-+++ b/arch/arm/dts/sun8i-a23-a33.dtsi
-@@ -56,7 +56,7 @@
- #size-cells = <1>;
- ranges;
-
-- framebuffer@0 {
-+ simplefb_lcd: framebuffer@0 {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0";
-@@ -175,27 +175,13 @@
- clock-output-names = "apb1";
- };
-
-- ahb1_gates: clk@01c20060 {
-- #clock-cells = <1>;
-- compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
-- reg = <0x01c20060 0x8>;
-- clocks = <&ahb1>;
-- clock-output-names = "ahb1_mipidsi", "ahb1_dma",
-- "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
-- "ahb1_nand", "ahb1_sdram",
-- "ahb1_hstimer", "ahb1_spi0",
-- "ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-- "ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-- "ahb1_csi", "ahb1_be", "ahb1_fe",
-- "ahb1_gpu", "ahb1_spinlock",
-- "ahb1_drc";
-- };
--
- apb1_gates: clk@01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun8i-a23-apb1-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb1>;
-+ clock-indices = <0>, <5>,
-+ <12>, <13>;
- clock-output-names = "apb1_codec", "apb1_pio",
- "apb1_daudio0", "apb1_daudio1";
- };
-@@ -213,6 +199,10 @@
- compatible = "allwinner,sun8i-a23-apb2-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb2>;
-+ clock-indices = <0>, <1>,
-+ <2>, <16>,
-+ <17>, <18>,
-+ <19>, <20>;
- clock-output-names = "apb2_i2c0", "apb2_i2c1",
- "apb2_i2c2", "apb2_uart0",
- "apb2_uart1", "apb2_uart2",
-@@ -391,12 +381,19 @@
- allwinner,pins = "PC5", "PC6", "PC8",
- "PC9", "PC10", "PC11",
- "PC12", "PC13", "PC14",
-- "PC15";
-+ "PC15", "PC16";
- allwinner,function = "mmc2";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
-+ pwm0_pins: pwm0 {
-+ allwinner,pins = "PH0";
-+ allwinner,function = "pwm0";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
- i2c0_pins_a: i2c0@0 {
- allwinner,pins = "PH2", "PH3";
- allwinner,function = "i2c0";
-@@ -451,6 +448,14 @@
- interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- };
-
-+ pwm: pwm@01c21400 {
-+ compatible = "allwinner,sun7i-a20-pwm";
-+ reg = <0x01c21400 0xc>;
-+ clocks = <&osc24M>;
-+ #pwm-cells = <3>;
-+ status = "disabled";
-+ };
-+
- lradc: lradc@01c22800 {
- compatible = "allwinner,sun4i-a10-lradc-keys";
- reg = <0x01c22800 0x100>;
-@@ -574,6 +579,14 @@
- <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- };
-
-+ nmi_intc: interrupt-controller@01f00c0c {
-+ compatible = "allwinner,sun6i-a31-sc-nmi";
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+ reg = <0x01f00c0c 0x38>;
-+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
- prcm@01f01400 {
- compatible = "allwinner,sun8i-a23-prcm";
- reg = <0x01f01400 0x200>;
-@@ -642,10 +655,18 @@
- resets = <&apb0_rst 0>;
- gpio-controller;
- interrupt-controller;
-+ #interrupt-cells = <3>;
- #address-cells = <1>;
- #size-cells = <0>;
- #gpio-cells = <3>;
-
-+ r_rsb_pins: r_rsb {
-+ allwinner,pins = "PL0", "PL1";
-+ allwinner,function = "s_rsb";
-+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+
- r_uart_pins_a: r_uart@0 {
- allwinner,pins = "PL2", "PL3";
- allwinner,function = "s_uart";
-@@ -653,5 +674,19 @@
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-+
-+ r_rsb: rsb@01f03400 {
-+ compatible = "allwinner,sun8i-a23-rsb";
-+ reg = <0x01f03400 0x400>;
-+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&apb0_gates 3>;
-+ clock-frequency = <3000000>;
-+ resets = <&apb0_rst 3>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&r_rsb_pins>;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
- };
- };
---- a/arch/arm/dts/sun8i-a23-gt90h-v4.dts
-+++ b/arch/arm/dts/sun8i-a23-gt90h-v4.dts
-@@ -47,15 +47,26 @@
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/input/input.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
-+#include <dt-bindings/pwm/pwm.h>
-
- / {
-- model = "Allwinner GT90H Quad Core Tablet (v4)";
-- compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a33";
-+ model = "Allwinner GT90H Dual Core Tablet (v4)";
-+ compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a23";
-
- aliases {
- serial0 = &r_uart;
- };
-
-+ backlight: backlight {
-+ compatible = "pwm-backlight";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&bl_en_pin_gt90h>;
-+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-+ default-brightness-level = <8>;
-+ enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-+ };
-+
- chosen {
- stdout-path = "serial0:115200n8";
- };
-@@ -106,8 +117,7 @@
- &mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>;
-- /* FIXME this really is aldo1, correct once we've pmic support */
-- vmmc-supply = <®_vcc3v0>;
-+ vmmc-supply = <®_aldo1>;
- bus-width = <4>;
- cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
- cd-inverted;
-@@ -115,6 +125,13 @@
- };
-
- &pio {
-+ bl_en_pin_gt90h: bl_en_pin@0 {
-+ allwinner,pins = "PH6";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
- mmc0_cd_pin_gt90h: mmc0_cd_pin@0 {
- allwinner,pins = "PB4";
- allwinner,function = "gpio_in";
-@@ -123,12 +140,106 @@
- };
- };
-
-+&pwm {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pwm0_pins>;
-+ status = "okay";
-+};
-+
-+&r_rsb {
-+ status = "okay";
-+
-+ axp22x: pmic@3a3 {
-+ compatible = "x-powers,axp223";
-+ reg = <0x3a3>;
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+ eldoin-supply = <®_dcdc1>;
-+ };
-+};
-+
- &r_uart {
- pinctrl-names = "default";
- pinctrl-0 = <&r_uart_pins_a>;
- status = "okay";
- };
-
-+#include "axp22x.dtsi"
-+
-+®_aldo1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "vcc-io";
-+};
-+
-+®_aldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <2350000>;
-+ regulator-max-microvolt = <2650000>;
-+ regulator-name = "vdd-dll";
-+};
-+
-+®_aldo3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <2700000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-pll-avcc";
-+};
-+
-+®_dc1sw {
-+ regulator-name = "vcc-lcd";
-+};
-+
-+®_dc5ldo {
-+ regulator-always-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-cpus";
-+};
-+
-+®_dcdc1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "vcc-3v0";
-+};
-+
-+®_dcdc2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-sys";
-+};
-+
-+®_dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-cpu";
-+};
-+
-+®_dcdc5 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-name = "vcc-dram";
-+};
-+
-+®_dldo1 {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-wifi";
-+};
-+
-+®_rtc_ldo {
-+ regulator-name = "vcc-rtc";
-+};
-+
-+&simplefb_lcd {
-+ vcc-lcd-supply = <®_dc1sw>;
-+};
-+
- /*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp223 pmic on the board.
-@@ -141,5 +252,6 @@
- };
-
- &usbphy {
-+ usb1_vbus-supply = <®_dldo1>;
- status = "okay";
- };
---- a/arch/arm/dts/sun8i-a23.dtsi
-+++ b/arch/arm/dts/sun8i-a23.dtsi
-@@ -50,6 +50,31 @@
- };
-
- clocks {
-+ ahb1_gates: clk@01c20060 {
-+ #clock-cells = <1>;
-+ compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
-+ reg = <0x01c20060 0x8>;
-+ clocks = <&ahb1>;
-+ clock-indices = <1>, <6>,
-+ <8>, <9>, <10>,
-+ <13>, <14>,
-+ <19>, <20>,
-+ <21>, <24>, <26>,
-+ <29>, <32>, <36>,
-+ <40>, <44>, <46>,
-+ <52>, <53>,
-+ <54>, <57>;
-+ clock-output-names = "ahb1_mipidsi", "ahb1_dma",
-+ "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
-+ "ahb1_nand", "ahb1_sdram",
-+ "ahb1_hstimer", "ahb1_spi0",
-+ "ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-+ "ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-+ "ahb1_csi", "ahb1_be", "ahb1_fe",
-+ "ahb1_gpu", "ahb1_msgbox",
-+ "ahb1_spinlock", "ahb1_drc";
-+ };
-+
- mbus_clk: clk@01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun8i-a23-mbus-clk";
---- a/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
-+++ b/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
-@@ -68,7 +68,7 @@
- };
-
- &lradc {
-- vref-supply = <®_vcc3v0>;
-+ vref-supply = <®_dcdc1>;
- status = "okay";
-
- button@200 {
-@@ -96,7 +96,7 @@
- &mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>;
-- vmmc-supply = <®_vcc3v0>;
-+ vmmc-supply = <®_dcdc1>;
- bus-width = <4>;
- cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
- cd-inverted;
-@@ -106,13 +106,16 @@
- &mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_8bit_pins>;
-- vmmc-supply = <®_vcc3v0>;
-+ vmmc-supply = <®_dcdc1>;
- bus-width = <8>;
- non-removable;
-+ cap-mmc-hw-reset;
- status = "okay";
- };
-
- &mmc2_8bit_pins {
-+ /* Increase drive strength for DDR modes */
-+ allwinner,drive = <SUN4I_PINCTRL_40_MA>;
- /* eMMC is missing pull-ups */
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-@@ -130,6 +133,80 @@
- };
- };
-
-+&r_rsb {
-+ status = "okay";
-+
-+ axp22x: pmic@3a3 {
-+ compatible = "x-powers,axp223";
-+ reg = <0x3a3>;
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+ eldoin-supply = <®_dcdc1>;
-+ };
-+};
-+
-+#include "axp22x.dtsi"
-+
-+®_aldo1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "vcc-io";
-+};
-+
-+®_aldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <2350000>;
-+ regulator-max-microvolt = <2650000>;
-+ regulator-name = "vdd-dll";
-+};
-+
-+®_aldo3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <2700000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-pll-avcc";
-+};
-+
-+®_dc5ldo {
-+ regulator-always-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-cpus";
-+};
-+
-+®_dcdc1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "vcc-3v0";
-+};
-+
-+®_dcdc2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-sys";
-+};
-+
-+®_dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-cpu";
-+};
-+
-+®_dcdc5 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-name = "vcc-dram";
-+};
-+
-+®_rtc_ldo {
-+ regulator-name = "vcc-rtc";
-+};
-+
- &uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_b>;
---- a/arch/arm/dts/sun8i-a33.dtsi
-+++ b/arch/arm/dts/sun8i-a33.dtsi
-@@ -72,6 +72,41 @@
- clock-output-names = "pll11";
- };
-
-+ ahb1_gates: clk@01c20060 {
-+ #clock-cells = <1>;
-+ compatible = "allwinner,sun8i-a33-ahb1-gates-clk";
-+ reg = <0x01c20060 0x8>;
-+ clocks = <&ahb1>;
-+ clock-indices = <1>, <5>,
-+ <6>, <8>, <9>,
-+ <10>, <13>, <14>,
-+ <19>, <20>,
-+ <21>, <24>, <26>,
-+ <29>, <32>, <36>,
-+ <40>, <44>, <46>,
-+ <52>, <53>,
-+ <54>, <57>,
-+ <58>;
-+ clock-output-names = "ahb1_mipidsi", "ahb1_ss",
-+ "ahb1_dma","ahb1_mmc0", "ahb1_mmc1",
-+ "ahb1_mmc2", "ahb1_nand", "ahb1_sdram",
-+ "ahb1_hstimer", "ahb1_spi0",
-+ "ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-+ "ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-+ "ahb1_csi", "ahb1_be", "ahb1_fe",
-+ "ahb1_gpu", "ahb1_msgbox",
-+ "ahb1_spinlock", "ahb1_drc",
-+ "ahb1_sat";
-+ };
-+
-+ ss_clk: clk@01c2009c {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
-+ reg = <0x01c2009c 0x4>;
-+ clocks = <&osc24M>, <&pll6 0>;
-+ clock-output-names = "ss";
-+ };
-+
- mbus_clk: clk@01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun8i-a23-mbus-clk";
-@@ -82,6 +117,16 @@
- };
-
- soc@01c00000 {
-+ crypto: crypto-engine@01c15000 {
-+ compatible = "allwinner,sun4i-a10-crypto";
-+ reg = <0x01c15000 0x1000>;
-+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ahb1_gates 5>, <&ss_clk>;
-+ clock-names = "ahb", "mod";
-+ resets = <&ahb1_rst 5>;
-+ reset-names = "ahb";
-+ };
-+
- usb_otg: usb@01c19000 {
- compatible = "allwinner,sun8i-a33-musb";
- reg = <0x01c19000 0x0400>;
---- /dev/null
-+++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
-@@ -0,0 +1,65 @@
-+/*
-+ * Copyright 2015 Chen-Yu Tsai
-+ *
-+ * Chen-Yu Tsai <wens@csie.org>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun8i-a83t.dtsi"
-+
-+/ {
-+ model = "Cubietech Cubietruck Plus";
-+ compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_b>;
-+ status = "okay";
-+};
---- a/arch/arm/dts/sun8i-a83t.dtsi
-+++ b/arch/arm/dts/sun8i-a83t.dtsi
-@@ -52,12 +52,6 @@
- / {
- interrupt-parent = <&gic>;
-
-- chosen {
-- #address-cells = <1>;
-- #size-cells = <1>;
-- ranges;
-- };
--
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-@@ -85,6 +79,7 @@
- device_type = "cpu";
- reg = <3>;
- };
-+
- cpu@100 {
- compatible = "arm,cortex-a7";
- device_type = "cpu";
-@@ -96,6 +91,7 @@
- device_type = "cpu";
- reg = <0x101>;
- };
-+
- cpu@102 {
- compatible = "arm,cortex-a7";
- device_type = "cpu";
-@@ -109,18 +105,12 @@
- };
- };
-
-- memory {
-- reg = <0x40000000 0x80000000>;
-- };
--
- timer {
- compatible = "arm,armv7-timer";
-- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-- clock-frequency = <24000000>;
-- arm,cpu-registers-not-fw-configured;
-+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- clocks {
-@@ -128,6 +118,7 @@
- #size-cells = <1>;
- ranges;
-
-+ /* TODO: PRCM block has a mux for this. */
- osc24M: osc24M_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
-@@ -135,36 +126,39 @@
- clock-output-names = "osc24M";
- };
-
-- osc32k: osc32k_clk {
-+ /*
-+ * This is called "internal OSC" in some places.
-+ * It is an internal RC-based oscillator.
-+ * TODO: Its controls are in the PRCM block.
-+ */
-+ osc16M: osc16M_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
-- clock-frequency = <32768>;
-- clock-output-names = "osc32k";
-+ clock-frequency = <16000000>;
-+ clock-output-names = "osc16M";
-+ };
-+
-+ osc16Md512: osc16Md512_clk {
-+ #clock-cells = <0>;
-+ compatible = "fixed-factor-clock";
-+ clock-div = <512>;
-+ clock-mult = <1>;
-+ clocks = <&osc16M>;
-+ clock-output-names = "osc16M-d512";
- };
- };
-
-- soc@01c00000 {
-+ soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
-- gic: interrupt-controller@01c81000 {
-- compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
-- reg = <0x01c81000 0x1000>,
-- <0x01c82000 0x1000>,
-- <0x01c84000 0x2000>,
-- <0x01c86000 0x2000>;
-- interrupt-controller;
-- #interrupt-cells = <3>;
-- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-- };
--
- pio: pinctrl@01c20800 {
- compatible = "allwinner,sun8i-a83t-pinctrl";
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x01c20800 0x400>;
- clocks = <&osc24M>;
- gpio-controller;
-@@ -172,27 +166,6 @@
- #interrupt-cells = <3>;
- #gpio-cells = <3>;
-
-- i2c0_pins_a: i2c0@0 {
-- allwinner,pins = "PH0", "PH1";
-- allwinner,function = "i2c0";
-- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-- };
--
-- i2c1_pins_a: i2c1@0 {
-- allwinner,pins = "PH2", "PH3";
-- allwinner,function = "i2c1";
-- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-- };
--
-- i2c2_pins_a: i2c2@0 {
-- allwinner,pins = "PH4", "PH5";
-- allwinner,function = "i2c2";
-- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-- };
--
- mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0", "PF1", "PF2",
- "PF3", "PF4", "PF5";
-@@ -201,24 +174,6 @@
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
-- mmc1_pins_a: mmc1@0 {
-- allwinner,pins = "PG0", "PG1", "PG2",
-- "PG3", "PG4", "PG5";
-- allwinner,function = "mmc1";
-- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-- };
--
-- mmc2_8bit_pins: mmc2_8bit {
-- allwinner,pins = "PC5", "PC6", "PC8",
-- "PC9", "PC10", "PC11",
-- "PC12", "PC13", "PC14",
-- "PC15";
-- allwinner,function = "mmc2";
-- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-- };
--
- uart0_pins_a: uart0@0 {
- allwinner,pins = "PF2", "PF4";
- allwinner,function = "uart0";
-@@ -234,6 +189,21 @@
- };
- };
-
-+ timer@01c20c00 {
-+ compatible = "allwinner,sun4i-a10-timer";
-+ reg = <0x01c20c00 0xa0>;
-+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&osc24M>;
-+ };
-+
-+ watchdog@01c20ca0 {
-+ compatible = "allwinner,sun6i-a31-wdt";
-+ reg = <0x01c20ca0 0x20>;
-+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&osc24M>;
-+ };
-+
- uart0: serial@01c28000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28000 0x400>;
-@@ -243,5 +213,16 @@
- clocks = <&osc24M>;
- status = "disabled";
- };
-+
-+ gic: interrupt-controller@01c81000 {
-+ compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
-+ reg = <0x01c81000 0x1000>,
-+ <0x01c82000 0x1000>,
-+ <0x01c84000 0x2000>,
-+ <0x01c86000 0x2000>;
-+ interrupt-controller;
-+ #interrupt-cells = <3>;
-+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
-+ };
- };
- };
---- a/arch/arm/dts/sun8i-h3-orangepi-pc.dts
-+++ b/arch/arm/dts/sun8i-h3-orangepi-pc.dts
-@@ -45,6 +45,7 @@
- #include "sunxi-common-regulators.dtsi"
-
- #include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
-
- / {
-@@ -58,6 +59,43 @@
- chosen {
- stdout-path = "serial0:115200n8";
- };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&leds_opc>;
-+
-+ status_led {
-+ label = "status:red:user";
-+ gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ r_leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&leds_r_opc>;
-+
-+ tx {
-+ label = "pwr:green:user";
-+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
-+ default-state = "on";
-+ };
-+ };
-+
-+ r_gpio_keys {
-+ compatible = "gpio-keys";
-+ input-name = "sw4";
-+
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sw_r_opc>;
-+
-+ sw4@0 {
-+ label = "sw4";
-+ linux,code = <BTN_0>;
-+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-+ };
-+ };
- };
-
- &ehci1 {
-@@ -72,6 +110,12 @@
- status = "okay";
- };
-
-+&ir {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ir_pins_a>;
-+ status = "okay";
-+};
-+
- &mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
-@@ -94,6 +138,31 @@
- status = "okay";
- };
-
-+&pio {
-+ leds_opc: led_pins@0 {
-+ allwinner,pins = "PA15";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+};
-+
-+&r_pio {
-+ leds_r_opc: led_pins@0 {
-+ allwinner,pins = "PL10";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ sw_r_opc: key_pins@0 {
-+ allwinner,pins = "PL03";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+};
-+
- &uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
---- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts
-+++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts
-@@ -45,6 +45,7 @@
- #include "sunxi-common-regulators.dtsi"
-
- #include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
- #include <dt-bindings/pinctrl/sun4i-a10.h>
-
- / {
-@@ -70,6 +71,68 @@
- enable-active-high;
- gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
- };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&leds_opc>;
-+
-+ status_led {
-+ label = "status:red:user";
-+ gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ r_leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&leds_r_opc>;
-+
-+ tx {
-+ label = "pwr:green:user";
-+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
-+ default-state = "on";
-+ };
-+ };
-+
-+ r_gpio_keys {
-+ compatible = "gpio-keys";
-+ input-name = "sw4";
-+
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sw_r_opc>;
-+
-+ sw4@0 {
-+ label = "sw4";
-+ linux,code = <BTN_0>;
-+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&pio {
-+ leds_opc: led_pins@0 {
-+ allwinner,pins = "PA15";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+};
-+
-+&r_pio {
-+ leds_r_opc: led_pins@0 {
-+ allwinner,pins = "PL10";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ sw_r_opc: key_pins@0 {
-+ allwinner,pins = "PL03";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
- };
-
- &ehci1 {
---- a/arch/arm/dts/sun8i-h3.dtsi
-+++ b/arch/arm/dts/sun8i-h3.dtsi
-@@ -83,12 +83,6 @@
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-- clock-frequency = <24000000>;
-- arm,cpu-registers-not-fw-configured;
-- };
--
-- memory {
-- reg = <0x40000000 0x80000000>;
- };
-
- clocks {
-@@ -131,15 +125,24 @@
- compatible = "allwinner,sun6i-a31-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
-- clock-output-names = "pll6", "pll6x2", "pll6d2";
-+ clock-output-names = "pll6", "pll6x2";
- };
-
-- pll8: clk@01c20044 {
-- #clock-cells = <1>;
-- compatible = "allwinner,sun6i-a31-pll6-clk";
-- reg = <0x01c20044 0x4>;
-- clocks = <&osc24M>;
-- clock-output-names = "pll8", "pll8x2";
-+ pll6d2: pll6d2_clk {
-+ #clock-cells = <0>;
-+ compatible = "fixed-factor-clock";
-+ clock-div = <2>;
-+ clock-mult = <1>;
-+ clocks = <&pll6 0>;
-+ clock-output-names = "pll6d2";
-+ };
-+
-+ /* dummy clock until pll6 can be reused */
-+ pll8: pll8_clk {
-+ #clock-cells = <0>;
-+ compatible = "fixed-clock";
-+ clock-frequency = <1>;
-+ clock-output-names = "pll8";
- };
-
- cpu: cpu_clk@01c20050 {
-@@ -170,7 +173,7 @@
- #clock-cells = <0>;
- compatible = "allwinner,sun8i-h3-ahb2-clk";
- reg = <0x01c2005c 0x4>;
-- clocks = <&ahb1>, <&pll6 2>;
-+ clocks = <&ahb1>, <&pll6d2>;
- clock-output-names = "ahb2";
- };
-
-@@ -213,34 +216,34 @@
- <76>, <77>, <78>,
- <96>, <97>, <98>,
- <112>, <113>,
-- <114>, <115>, <116>,
-- <128>, <135>;
-- clock-output-names = "ahb1_ce", "ahb1_dma", "ahb1_mmc0",
-- "ahb1_mmc1", "ahb1_mmc2", "ahb1_nand",
-- "ahb1_sdram", "ahb2_gmac", "ahb1_ts",
-- "ahb1_hstimer", "ahb1_spi0",
-- "ahb1_spi1", "ahb1_otg",
-- "ahb1_otg_ehci0", "ahb1_ehic1",
-- "ahb1_ehic2", "ahb1_ehic3",
-- "ahb1_otg_ohci0", "ahb2_ohic1",
-- "ahb2_ohic2", "ahb2_ohic3", "ahb1_ve",
-- "ahb1_lcd0", "ahb1_lcd1", "ahb1_deint",
-- "ahb1_csi", "ahb1_tve", "ahb1_hdmi",
-- "ahb1_de", "ahb1_gpu", "ahb1_msgbox",
-- "ahb1_spinlock", "apb1_codec",
-- "apb1_spdif", "apb1_pio", "apb1_ths",
-- "apb1_i2s0", "apb1_i2s1", "apb1_i2s2",
-- "apb2_i2c0", "apb2_i2c1", "apb2_i2c2",
-- "apb2_uart0", "apb2_uart1",
-- "apb2_uart2", "apb2_uart3", "apb2_scr",
-- "ahb1_ephy", "ahb1_dbg";
-+ <114>, <115>,
-+ <116>, <128>, <135>;
-+ clock-output-names = "bus_ce", "bus_dma", "bus_mmc0",
-+ "bus_mmc1", "bus_mmc2", "bus_nand",
-+ "bus_sdram", "bus_gmac", "bus_ts",
-+ "bus_hstimer", "bus_spi0",
-+ "bus_spi1", "bus_otg",
-+ "bus_otg_ehci0", "bus_ehci1",
-+ "bus_ehci2", "bus_ehci3",
-+ "bus_otg_ohci0", "bus_ohci1",
-+ "bus_ohci2", "bus_ohci3", "bus_ve",
-+ "bus_lcd0", "bus_lcd1", "bus_deint",
-+ "bus_csi", "bus_tve", "bus_hdmi",
-+ "bus_de", "bus_gpu", "bus_msgbox",
-+ "bus_spinlock", "bus_codec",
-+ "bus_spdif", "bus_pio", "bus_ths",
-+ "bus_i2s0", "bus_i2s1", "bus_i2s2",
-+ "bus_i2c0", "bus_i2c1", "bus_i2c2",
-+ "bus_uart0", "bus_uart1",
-+ "bus_uart2", "bus_uart3",
-+ "bus_scr", "bus_ephy", "bus_dbg";
- };
-
- mmc0_clk: clk@01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
-- clocks = <&osc24M>, <&pll6 0>, <&pll8 0>;
-+ clocks = <&osc24M>, <&pll6 0>, <&pll8>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
-@@ -250,7 +253,7 @@
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
-- clocks = <&osc24M>, <&pll6 0>, <&pll8 0>;
-+ clocks = <&osc24M>, <&pll6 0>, <&pll8>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
-@@ -260,7 +263,7 @@
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
-- clocks = <&osc24M>, <&pll6 0>, <&pll8 0>;
-+ clocks = <&osc24M>, <&pll6 0>, <&pll8>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
-@@ -285,6 +288,33 @@
- clocks = <&osc24M>, <&pll6 1>, <&pll5>;
- clock-output-names = "mbus";
- };
-+
-+ apb0: apb0_clk {
-+ compatible = "fixed-factor-clock";
-+ #clock-cells = <0>;
-+ clock-div = <1>;
-+ clock-mult = <1>;
-+ clocks = <&osc24M>;
-+ clock-output-names = "apb0";
-+ };
-+
-+ apb0_gates: clk@01f01428 {
-+ compatible = "allwinner,sun8i-h3-apb0-gates-clk",
-+ "allwinner,sun4i-a10-gates-clk";
-+ reg = <0x01f01428 0x4>;
-+ #clock-cells = <1>;
-+ clocks = <&apb0>;
-+ clock-indices = <0>, <1>;
-+ clock-output-names = "apb0_pio", "apb0_ir";
-+ };
-+
-+ ir_clk: ir_clk@01f01454 {
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
-+ reg = <0x01f01454 0x4>;
-+ #clock-cells = <0>;
-+ clocks = <&osc32k>, <&osc24M>;
-+ clock-output-names = "ir";
-+ };
- };
-
- soc {
-@@ -298,7 +328,7 @@
- reg = <0x01c02000 0x1000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bus_gates 6>;
-- resets = <&bus_rst 6>;
-+ resets = <&ahb_rst 6>;
- #dma-cells = <1>;
- };
-
-@@ -313,7 +343,7 @@
- "mmc",
- "output",
- "sample";
-- resets = <&bus_rst 8>;
-+ resets = <&ahb_rst 8>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
-@@ -332,7 +362,7 @@
- "mmc",
- "output",
- "sample";
-- resets = <&bus_rst 9>;
-+ resets = <&ahb_rst 9>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
-@@ -351,7 +381,7 @@
- "mmc",
- "output",
- "sample";
-- resets = <&bus_rst 10>;
-+ resets = <&ahb_rst 10>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
-@@ -396,7 +426,7 @@
- reg = <0x01c1b000 0x100>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bus_gates 25>, <&bus_gates 29>;
-- resets = <&bus_rst 25>, <&bus_rst 29>;
-+ resets = <&ahb_rst 25>, <&ahb_rst 29>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
-@@ -408,7 +438,7 @@
- interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bus_gates 29>, <&bus_gates 25>,
- <&usb_clk 17>;
-- resets = <&bus_rst 29>, <&bus_rst 25>;
-+ resets = <&ahb_rst 29>, <&ahb_rst 25>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
-@@ -419,7 +449,7 @@
- reg = <0x01c1c000 0x100>;
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bus_gates 26>, <&bus_gates 30>;
-- resets = <&bus_rst 26>, <&bus_rst 30>;
-+ resets = <&ahb_rst 26>, <&ahb_rst 30>;
- phys = <&usbphy 2>;
- phy-names = "usb";
- status = "disabled";
-@@ -431,7 +461,7 @@
- interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bus_gates 30>, <&bus_gates 26>,
- <&usb_clk 18>;
-- resets = <&bus_rst 30>, <&bus_rst 26>;
-+ resets = <&ahb_rst 30>, <&ahb_rst 26>;
- phys = <&usbphy 2>;
- phy-names = "usb";
- status = "disabled";
-@@ -442,7 +472,7 @@
- reg = <0x01c1d000 0x100>;
- interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bus_gates 27>, <&bus_gates 31>;
-- resets = <&bus_rst 27>, <&bus_rst 31>;
-+ resets = <&ahb_rst 27>, <&ahb_rst 31>;
- phys = <&usbphy 3>;
- phy-names = "usb";
- status = "disabled";
-@@ -454,7 +484,7 @@
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bus_gates 31>, <&bus_gates 27>,
- <&usb_clk 19>;
-- resets = <&bus_rst 31>, <&bus_rst 27>;
-+ resets = <&ahb_rst 31>, <&ahb_rst 27>;
- phys = <&usbphy 3>;
- phy-names = "usb";
- status = "disabled";
-@@ -469,7 +499,7 @@
- gpio-controller;
- #gpio-cells = <3>;
- interrupt-controller;
-- #interrupt-cells = <2>;
-+ #interrupt-cells = <3>;
-
- uart0_pins_a: uart0@0 {
- allwinner,pins = "PA4", "PA5";
-@@ -502,10 +532,22 @@
- };
- };
-
-- bus_rst: reset@01c202c0 {
-+ ahb_rst: reset@01c202c0 {
- #reset-cells = <1>;
-- compatible = "allwinner,sun8i-h3-bus-reset";
-- reg = <0x01c202c0 0x1c>;
-+ compatible = "allwinner,sun6i-a31-ahb1-reset";
-+ reg = <0x01c202c0 0xc>;
-+ };
-+
-+ apb1_rst: reset@01c202d0 {
-+ #reset-cells = <1>;
-+ compatible = "allwinner,sun6i-a31-clock-reset";
-+ reg = <0x01c202d0 0x4>;
-+ };
-+
-+ apb2_rst: reset@01c202d8 {
-+ #reset-cells = <1>;
-+ compatible = "allwinner,sun6i-a31-clock-reset";
-+ reg = <0x01c202d8 0x4>;
- };
-
- timer@01c20c00 {
-@@ -529,7 +571,7 @@
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&bus_gates 112>;
-- resets = <&bus_rst 144>;
-+ resets = <&apb2_rst 16>;
- dmas = <&dma 6>, <&dma 6>;
- dma-names = "rx", "tx";
- status = "disabled";
-@@ -542,7 +584,7 @@
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&bus_gates 113>;
-- resets = <&bus_rst 145>;
-+ resets = <&apb2_rst 17>;
- dmas = <&dma 7>, <&dma 7>;
- dma-names = "rx", "tx";
- status = "disabled";
-@@ -555,7 +597,7 @@
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&bus_gates 114>;
-- resets = <&bus_rst 146>;
-+ resets = <&apb2_rst 18>;
- dmas = <&dma 8>, <&dma 8>;
- dma-names = "rx", "tx";
- status = "disabled";
-@@ -568,7 +610,7 @@
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&bus_gates 115>;
-- resets = <&bus_rst 147>;
-+ resets = <&apb2_rst 19>;
- dmas = <&dma 9>, <&dma 9>;
- dma-names = "rx", "tx";
- status = "disabled";
-@@ -591,5 +633,40 @@
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- };
-+
-+ apb0_reset: reset@01f014b0 {
-+ reg = <0x01f014b0 0x4>;
-+ compatible = "allwinner,sun6i-a31-clock-reset";
-+ #reset-cells = <1>;
-+ };
-+
-+ ir: ir@01f02000 {
-+ compatible = "allwinner,sun5i-a13-ir";
-+ clocks = <&apb0_gates 1>, <&ir_clk>;
-+ clock-names = "apb", "ir";
-+ resets = <&apb0_reset 1>;
-+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-+ reg = <0x01f02000 0x40>;
-+ status = "disabled";
-+ };
-+
-+ r_pio: pinctrl@01f02c00 {
-+ compatible = "allwinner,sun8i-h3-r-pinctrl";
-+ reg = <0x01f02c00 0x400>;
-+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&apb0_gates 0>;
-+ resets = <&apb0_reset 0>;
-+ gpio-controller;
-+ #gpio-cells = <3>;
-+ interrupt-controller;
-+ #interrupt-cells = <3>;
-+
-+ ir_pins_a: ir@0 {
-+ allwinner,pins = "PL11";
-+ allwinner,function = "s_cir_rx";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+ };
- };
- };
---- a/arch/arm/dts/sun8i-q8-common.dtsi
-+++ b/arch/arm/dts/sun8i-q8-common.dtsi
-@@ -41,11 +41,23 @@
- */
- #include "sunxi-q8-common.dtsi"
-
-+#include <dt-bindings/pwm/pwm.h>
-+
- / {
- aliases {
- serial0 = &r_uart;
- };
-
-+ backlight: backlight {
-+ compatible = "pwm-backlight";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&bl_en_pin_q8>;
-+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-+ default-brightness-level = <8>;
-+ enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-+ };
-+
- chosen {
- stdout-path = "serial0:115200n8";
- };
-@@ -54,7 +66,7 @@
- &mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
-- vmmc-supply = <®_vcc3v0>;
-+ vmmc-supply = <®_dcdc1>;
- bus-width = <4>;
- cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
- cd-inverted;
-@@ -77,8 +89,90 @@
- };
- };
-
-+&r_rsb {
-+ status = "okay";
-+
-+ axp22x: pmic@3a3 {
-+ compatible = "x-powers,axp223";
-+ reg = <0x3a3>;
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+ eldoin-supply = <®_dcdc1>;
-+ };
-+};
-+
-+#include "axp22x.dtsi"
-+
-+®_aldo1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "vcc-io";
-+};
-+
-+®_aldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <2350000>;
-+ regulator-max-microvolt = <2650000>;
-+ regulator-name = "vdd-dll";
-+};
-+
-+®_aldo3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <2700000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-pll-avcc";
-+};
-+
-+®_dc1sw {
-+ regulator-name = "vcc-lcd";
-+};
-+
-+®_dc5ldo {
-+ regulator-always-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-cpus";
-+};
-+
-+®_dcdc1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "vcc-3v0";
-+};
-+
-+®_dcdc2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-sys";
-+};
-+
-+®_dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-cpu";
-+};
-+
-+®_dcdc5 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-name = "vcc-dram";
-+};
-+
-+®_rtc_ldo {
-+ regulator-name = "vcc-rtc";
-+};
-+
- &r_uart {
- pinctrl-names = "default";
- pinctrl-0 = <&r_uart_pins_a>;
- status = "okay";
- };
-+
-+&simplefb_lcd {
-+ vcc-lcd-supply = <®_dc1sw>;
-+};
---- a/arch/arm/dts/sun9i-a80-cubieboard4.dts
-+++ b/arch/arm/dts/sun9i-a80-cubieboard4.dts
-@@ -62,9 +62,31 @@
- stdout-path = "serial0:115200n8";
- };
-
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&led_pins_cubieboard4>;
-+
-+ green {
-+ label = "cubieboard4:green:usr";
-+ gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */
-+ };
-+
-+ red {
-+ label = "cubieboard4:red:usr";
-+ gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-+ };
-+ };
- };
-
- &pio {
-+ led_pins_cubieboard4: led-pins@0 {
-+ allwinner,pins = "PH6", "PH17";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
- mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
- allwinner,pins = "PH18";
- allwinner,function = "gpio_in";
-@@ -89,6 +111,20 @@
- vmmc-supply = <®_vcc3v0>;
- bus-width = <8>;
- non-removable;
-+ cap-mmc-hw-reset;
-+ status = "okay";
-+};
-+
-+&mmc2_8bit_pins {
-+ /* Increase drive strength for DDR modes */
-+ allwinner,drive = <SUN4I_PINCTRL_40_MA>;
-+};
-+
-+&r_ir {
-+ status = "okay";
-+};
-+
-+&r_rsb {
- status = "okay";
- };
-
---- a/arch/arm/dts/sun9i-a80-optimus.dts
-+++ b/arch/arm/dts/sun9i-a80-optimus.dts
-@@ -65,7 +65,7 @@
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
-- pinctrl-0 = <&led_pins_optimus>;
-+ pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>;
-
- /* The LED names match those found on the board */
-
-@@ -74,7 +74,10 @@
- gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
- };
-
-- /* led3 is on PM15, in R_PIO */
-+ led3 {
-+ label = "optimus:led3:usr";
-+ gpios = <&r_pio 1 15 GPIO_ACTIVE_HIGH>; /* PM15 */
-+ };
-
- led4 {
- label = "optimus:led4:usr";
-@@ -106,17 +109,6 @@
- status = "okay";
- };
-
--&i2c3 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&i2c3_pins_a>;
-- status = "okay";
--};
--
--&i2c3_pins_a {
-- /* Enable internal pull-up */
-- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
--};
--
- &ohci0 {
- status = "okay";
- };
-@@ -171,30 +163,42 @@
- vmmc-supply = <®_vcc3v0>;
- bus-width = <8>;
- non-removable;
-+ cap-mmc-hw-reset;
- status = "okay";
- };
-
-+&mmc2_8bit_pins {
-+ /* Increase drive strength for DDR modes */
-+ allwinner,drive = <SUN4I_PINCTRL_40_MA>;
-+};
-+
- ®_usb1_vbus {
- pinctrl-0 = <&usb1_vbus_pin_optimus>;
- gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- status = "okay";
- };
-
--&uart0 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&uart0_pins_a>;
-+&r_ir {
- status = "okay";
- };
-
--&uart4 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&uart4_pins_a>;
-+&r_pio {
-+ led_r_pins_optimus: led-pins@1 {
-+ allwinner,pins = "PM15";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+};
-+
-+&r_rsb {
- status = "okay";
- };
-
--&uart4_pins_a {
-- /* Enable internal pull-up */
-- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
- };
-
- &usbphy1 {
---- a/arch/arm/dts/sun9i-a80.dtsi
-+++ b/arch/arm/dts/sun9i-a80.dtsi
-@@ -128,6 +128,17 @@
- */
- ranges = <0 0 0 0x20000000>;
-
-+ /*
-+ * This clock is actually configurable from the PRCM address
-+ * space. The external 24M oscillator can be turned off, and
-+ * the clock switched to an internal 16M RC oscillator. Under
-+ * normal operation there's no reason to do this, and the
-+ * default is to use the external good one, so just model this
-+ * as a fixed clock. Also it is not entirely clear if the
-+ * osc24M mux in the PRCM affects the entire clock tree, which
-+ * would also throw all the PLL clock rates off, or just the
-+ * downstream clocks in the PRCM.
-+ */
- osc24M: osc24M_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
-@@ -135,6 +146,13 @@
- clock-output-names = "osc24M";
- };
-
-+ /*
-+ * The 32k clock is from an external source, normally the
-+ * AC100 codec/RTC chip. This clock is by default enabled
-+ * and clocked at 32768 Hz, from the oscillator connected
-+ * to the AC100. It is configurable, but no such driver or
-+ * bindings exist yet.
-+ */
- osc32k: osc32k_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
-@@ -164,6 +182,14 @@
- "usb_phy2", "usb_hsic_12M";
- };
-
-+ pll3: clk@06000008 {
-+ /* placeholder until implemented */
-+ #clock-cells = <0>;
-+ compatible = "fixed-clock";
-+ clock-rate = <0>;
-+ clock-output-names = "pll3";
-+ };
-+
- pll4: clk@0600000c {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-pll4-clk";
-@@ -277,9 +303,12 @@
- compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
- reg = <0x06000580 0x4>;
- clocks = <&ahb0>;
-- clock-indices = <0>, <1>, <3>, <5>, <8>, <12>, <13>,
-- <14>, <15>, <16>, <18>, <20>, <21>,
-- <22>, <23>;
-+ clock-indices = <0>, <1>, <3>,
-+ <5>, <8>, <12>,
-+ <13>, <14>,
-+ <15>, <16>, <18>,
-+ <20>, <21>, <22>,
-+ <23>;
- clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu",
- "ahb0_ss", "ahb0_sd", "ahb0_nand1",
- "ahb0_nand0", "ahb0_sdram",
-@@ -293,7 +322,10 @@
- compatible = "allwinner,sun9i-a80-ahb1-gates-clk";
- reg = <0x06000584 0x4>;
- clocks = <&ahb1>;
-- clock-indices = <0>, <1>, <17>, <21>, <22>, <23>, <24>;
-+ clock-indices = <0>, <1>,
-+ <17>, <21>,
-+ <22>, <23>,
-+ <24>;
- clock-output-names = "ahb1_usbotg", "ahb1_usbhci",
- "ahb1_gmac", "ahb1_msgbox",
- "ahb1_spinlock", "ahb1_hstimer",
-@@ -305,8 +337,9 @@
- compatible = "allwinner,sun9i-a80-ahb2-gates-clk";
- reg = <0x06000588 0x4>;
- clocks = <&ahb2>;
-- clock-indices = <0>, <1>, <2>, <4>, <5>, <7>, <8>,
-- <11>;
-+ clock-indices = <0>, <1>,
-+ <2>, <4>, <5>,
-+ <7>, <8>, <11>;
- clock-output-names = "ahb2_lcd0", "ahb2_lcd1",
- "ahb2_edp", "ahb2_csi", "ahb2_hdmi",
- "ahb2_de", "ahb2_mp", "ahb2_mipi_dsi";
-@@ -317,8 +350,10 @@
- compatible = "allwinner,sun9i-a80-apb0-gates-clk";
- reg = <0x06000590 0x4>;
- clocks = <&apb0>;
-- clock-indices = <1>, <5>, <11>, <12>, <13>, <15>,
-- <17>, <18>, <19>;
-+ clock-indices = <1>, <5>,
-+ <11>, <12>, <13>,
-+ <15>, <17>, <18>,
-+ <19>;
- clock-output-names = "apb0_spdif", "apb0_pio",
- "apb0_ac97", "apb0_i2s0", "apb0_i2s1",
- "apb0_lradc", "apb0_gpadc", "apb0_twd",
-@@ -330,14 +365,79 @@
- compatible = "allwinner,sun9i-a80-apb1-gates-clk";
- reg = <0x06000594 0x4>;
- clocks = <&apb1>;
-- clock-indices = <0>, <1>, <2>, <3>, <4>,
-- <16>, <17>, <18>, <19>, <20>, <21>;
-+ clock-indices = <0>, <1>,
-+ <2>, <3>, <4>,
-+ <16>, <17>,
-+ <18>, <19>,
-+ <20>, <21>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_i2c3", "apb1_i2c4",
- "apb1_uart0", "apb1_uart1",
- "apb1_uart2", "apb1_uart3",
- "apb1_uart4", "apb1_uart5";
- };
-+
-+ cpus_clk: clk@08001410 {
-+ compatible = "allwinner,sun9i-a80-cpus-clk";
-+ reg = <0x08001410 0x4>;
-+ #clock-cells = <0>;
-+ clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>;
-+ clock-output-names = "cpus";
-+ };
-+
-+ ahbs: ahbs_clk {
-+ compatible = "fixed-factor-clock";
-+ #clock-cells = <0>;
-+ clock-div = <1>;
-+ clock-mult = <1>;
-+ clocks = <&cpus_clk>;
-+ clock-output-names = "ahbs";
-+ };
-+
-+ apbs: clk@0800141c {
-+ compatible = "allwinner,sun8i-a23-apb0-clk";
-+ reg = <0x0800141c 0x4>;
-+ #clock-cells = <0>;
-+ clocks = <&ahbs>;
-+ clock-output-names = "apbs";
-+ };
-+
-+ apbs_gates: clk@08001428 {
-+ compatible = "allwinner,sun9i-a80-apbs-gates-clk";
-+ reg = <0x08001428 0x4>;
-+ #clock-cells = <1>;
-+ clocks = <&apbs>;
-+ clock-indices = <0>, <1>,
-+ <2>, <3>,
-+ <4>, <5>,
-+ <6>, <7>,
-+ <12>, <13>,
-+ <16>, <17>,
-+ <18>, <20>;
-+ clock-output-names = "apbs_pio", "apbs_ir",
-+ "apbs_timer", "apbs_rsb",
-+ "apbs_uart", "apbs_1wire",
-+ "apbs_i2c0", "apbs_i2c1",
-+ "apbs_ps2_0", "apbs_ps2_1",
-+ "apbs_dma", "apbs_i2s0",
-+ "apbs_i2s1", "apbs_twd";
-+ };
-+
-+ r_1wire_clk: clk@08001450 {
-+ reg = <0x08001450 0x4>;
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
-+ clocks = <&osc32k>, <&osc24M>;
-+ clock-output-names = "r_1wire";
-+ };
-+
-+ r_ir_clk: clk@08001454 {
-+ reg = <0x08001454 0x4>;
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
-+ clocks = <&osc32k>, <&osc24M>;
-+ clock-output-names = "r_ir";
-+ };
- };
-
- soc {
-@@ -443,7 +543,7 @@
- };
-
- mmc0: mmc@01c0f000 {
-- compatible = "allwinner,sun5i-a13-mmc";
-+ compatible = "allwinner,sun9i-a80-mmc";
- reg = <0x01c0f000 0x1000>;
- clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>,
- <&mmc0_clk 1>, <&mmc0_clk 2>;
-@@ -457,7 +557,7 @@
- };
-
- mmc1: mmc@01c10000 {
-- compatible = "allwinner,sun5i-a13-mmc";
-+ compatible = "allwinner,sun9i-a80-mmc";
- reg = <0x01c10000 0x1000>;
- clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>,
- <&mmc1_clk 1>, <&mmc1_clk 2>;
-@@ -471,7 +571,7 @@
- };
-
- mmc2: mmc@01c11000 {
-- compatible = "allwinner,sun5i-a13-mmc";
-+ compatible = "allwinner,sun9i-a80-mmc";
- reg = <0x01c11000 0x1000>;
- clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>,
- <&mmc2_clk 1>, <&mmc2_clk 2>;
-@@ -485,7 +585,7 @@
- };
-
- mmc3: mmc@01c12000 {
-- compatible = "allwinner,sun5i-a13-mmc";
-+ compatible = "allwinner,sun9i-a80-mmc";
- reg = <0x01c12000 0x1000>;
- clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>,
- <&mmc3_clk 1>, <&mmc3_clk 2>;
-@@ -582,7 +682,7 @@
- clocks = <&apb0_gates 5>;
- gpio-controller;
- interrupt-controller;
-- #interrupt-cells = <2>;
-+ #interrupt-cells = <3>;
- #size-cells = <0>;
- #gpio-cells = <3>;
-
-@@ -604,7 +704,8 @@
- mmc2_8bit_pins: mmc2_8bit {
- allwinner,pins = "PC6", "PC7", "PC8", "PC9",
- "PC10", "PC11", "PC12",
-- "PC13", "PC14", "PC15";
-+ "PC13", "PC14", "PC15",
-+ "PC16";
- allwinner,function = "mmc2";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-@@ -752,14 +853,83 @@
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- };
-
-+ apbs_rst: reset@080014b0 {
-+ reg = <0x080014b0 0x4>;
-+ compatible = "allwinner,sun6i-a31-clock-reset";
-+ #reset-cells = <1>;
-+ };
-+
-+ nmi_intc: interrupt-controller@080015a0 {
-+ compatible = "allwinner,sun9i-a80-nmi";
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+ reg = <0x080015a0 0xc>;
-+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ r_ir: ir@08002000 {
-+ compatible = "allwinner,sun5i-a13-ir";
-+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&r_ir_pins>;
-+ clocks = <&apbs_gates 1>, <&r_ir_clk>;
-+ clock-names = "apb", "ir";
-+ resets = <&apbs_rst 1>;
-+ reg = <0x08002000 0x40>;
-+ status = "disabled";
-+ };
-+
- r_uart: serial@08002800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x08002800 0x400>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
-- clocks = <&osc24M>;
-+ clocks = <&apbs_gates 4>;
-+ resets = <&apbs_rst 4>;
- status = "disabled";
- };
-+
-+ r_pio: pinctrl@08002c00 {
-+ compatible = "allwinner,sun9i-a80-r-pinctrl";
-+ reg = <0x08002c00 0x400>;
-+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&apbs_gates 0>;
-+ resets = <&apbs_rst 0>;
-+ gpio-controller;
-+ interrupt-controller;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ #gpio-cells = <3>;
-+
-+ r_ir_pins: r_ir {
-+ allwinner,pins = "PL6";
-+ allwinner,function = "s_cir_rx";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ r_rsb_pins: r_rsb {
-+ allwinner,pins = "PN0", "PN1";
-+ allwinner,function = "s_rsb";
-+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+ };
-+
-+ r_rsb: i2c@08003400 {
-+ compatible = "allwinner,sun8i-a23-rsb";
-+ reg = <0x08003400 0x400>;
-+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&apbs_gates 3>;
-+ clock-frequency = <3000000>;
-+ resets = <&apbs_rst 3>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&r_rsb_pins>;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
- };
- };
---- /dev/null
-+++ b/arch/arm/dts/sunxi-itead-core-common.dtsi
-@@ -0,0 +1,136 @@
-+/*
-+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include "sunxi-common-regulators.dtsi"
-+
-+/ {
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+};
-+
-+&cpu0 {
-+ cpu-supply = <®_dcdc2>;
-+};
-+
-+&ehci0 {
-+ status = "okay";
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&i2c0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins_a>;
-+ status = "okay";
-+
-+ axp209: pmic@34 {
-+ reg = <0x34>;
-+ };
-+};
-+
-+&i2c1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins_a>;
-+ status = "okay";
-+};
-+
-+&ohci0 {
-+ status = "okay";
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+#include "axp209.dtsi"
-+
-+®_dcdc2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-cpu";
-+};
-+
-+®_dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1400000>;
-+ regulator-name = "vdd-int-dll";
-+};
-+
-+®_ldo1 {
-+ regulator-name = "vdd-rtc";
-+};
-+
-+®_ldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "avcc";
-+};
-+
-+®_usb1_vbus {
-+ status = "okay";
-+};
-+
-+®_usb2_vbus {
-+ status = "okay";
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ usb1_vbus-supply = <®_usb1_vbus>;
-+ usb2_vbus-supply = <®_usb2_vbus>;
-+ status = "okay";
-+};
---- a/arch/arm/dts/sunxi-q8-common.dtsi
-+++ b/arch/arm/dts/sunxi-q8-common.dtsi
-@@ -75,3 +75,9 @@
- voltage = <400000>;
- };
- };
-+
-+&pwm {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pwm0_pins>;
-+ status = "okay";
-+};
deleted file mode 100644
@@ -1,38 +0,0 @@
-From 730d2f3a41c5ccae71b5008fffdf697d143be68c Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 16 Mar 2016 20:44:51 +0100
-Subject: [PATCH] sunxi: Fix clock_twi_onoff for sun6i
-
-The clock_sun6i.c implementation was not deasserting the reset for
-the regular i2c controllers, this commit fixes this.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Ian Campbell <ijc@hellion.org.uk>
----
- arch/arm/cpu/armv7/sunxi/clock_sun6i.c | 11 ++++++++---
- 1 file changed, 8 insertions(+), 3 deletions(-)
-
---- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-@@ -100,13 +100,18 @@ int clock_twi_onoff(int port, int state)
- return 0;
- }
-
-- /* set the apb clock gate for twi */
-- if (state)
-+ /* set the apb clock gate and reset for twi */
-+ if (state) {
- setbits_le32(&ccm->apb2_gate,
- CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port));
-- else
-+ setbits_le32(&ccm->apb2_reset_cfg,
-+ 1 << (APB2_RESET_TWI_SHIFT + port));
-+ } else {
-+ clrbits_le32(&ccm->apb2_reset_cfg,
-+ 1 << (APB2_RESET_TWI_SHIFT + port));
- clrbits_le32(&ccm->apb2_gate,
- CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port));
-+ }
-
- return 0;
- }
deleted file mode 100644
@@ -1,24 +0,0 @@
-From 1eae8f66ff749409eb96e2f3f3387c56232d0b8a Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 16 Mar 2016 13:46:22 +0100
-Subject: [PATCH] sunxi: Enable realtek phy support
-
-Enable building of drivers/net/phy/realtek.c so that realtek phys
-get properly initialized.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Ian Campbell <ijc@hellion.org.uk>
----
- include/configs/sunxi-common.h | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/include/configs/sunxi-common.h
-+++ b/include/configs/sunxi-common.h
-@@ -314,6 +314,7 @@ extern int soft_i2c_gpio_scl;
- #define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */
- #define CONFIG_PHY_ADDR 1
- #define CONFIG_MII /* MII PHY management */
-+#define CONFIG_PHY_REALTEK
- #endif
-
- #ifdef CONFIG_USB_EHCI_HCD
deleted file mode 100644
@@ -1,127 +0,0 @@
-From fc8991c61c393ce6a9d3dfc97cb56dbbd9e8cbba Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Thu, 17 Mar 2016 13:53:03 +0100
-Subject: [PATCH] sunxi: Fix gmac not working due to cpu_eth_init no longer
- being called
-
-cpu_eth_init is no longer called for dm enabled eth drivers, this
-was causing the sunxi gmac eth controller to no longer work in u-boot.
-
-This commit fixes this by calling the clock, reset and pinmux setup
-function from s_init() and enabling the phy power pin (if any) from
-board_init().
-
-The enabling of phy power cannot be done from s_init because it uses dm
-and dm is not ready yet at this point.
-
-Note that the mdelay is dropped as the phy gets enabled much earlier
-now, so it is no longer needed.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Ian Campbell <ijc@hellion.org.uk>
-Tested-by: Karsten Merker <merker@debian.org>
-Tested-by: Michael Haas <haas@computerlinguist.org>
----
- arch/arm/cpu/armv7/sunxi/board.c | 28 +---------------------------
- arch/arm/include/asm/arch-sunxi/sys_proto.h | 6 +++++-
- board/sunxi/board.c | 5 +++++
- board/sunxi/gmac.c | 14 +-------------
- 4 files changed, 12 insertions(+), 41 deletions(-)
-
---- a/arch/arm/cpu/armv7/sunxi/board.c
-+++ b/arch/arm/cpu/armv7/sunxi/board.c
-@@ -136,6 +136,7 @@ void s_init(void)
- timer_init();
- gpio_init();
- i2c_init_board();
-+ eth_init_board();
- }
-
- #ifdef CONFIG_SPL_BUILD
-@@ -243,30 +244,3 @@ void enable_caches(void)
- dcache_enable();
- }
- #endif
--
--#ifdef CONFIG_CMD_NET
--/*
-- * Initializes on-chip ethernet controllers.
-- * to override, implement board_eth_init()
-- */
--int cpu_eth_init(bd_t *bis)
--{
-- __maybe_unused int rc;
--
--#ifdef CONFIG_MACPWR
-- gpio_request(CONFIG_MACPWR, "macpwr");
-- gpio_direction_output(CONFIG_MACPWR, 1);
-- mdelay(200);
--#endif
--
--#ifdef CONFIG_SUNXI_GMAC
-- rc = sunxi_gmac_initialize(bis);
-- if (rc < 0) {
-- printf("sunxi: failed to initialize gmac\n");
-- return rc;
-- }
--#endif
--
-- return 0;
--}
--#endif
---- a/arch/arm/include/asm/arch-sunxi/sys_proto.h
-+++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h
-@@ -24,6 +24,10 @@ void sdelay(unsigned long);
- void return_to_fel(uint32_t lr, uint32_t sp);
-
- /* Board / SoC level designware gmac init */
--int sunxi_gmac_initialize(bd_t *bis);
-+#if !defined CONFIG_SPL_BUILD && defined CONFIG_SUNXI_GMAC
-+void eth_init_board(void);
-+#else
-+static inline void eth_init_board(void) {}
-+#endif
-
- #endif
---- a/board/sunxi/board.c
-+++ b/board/sunxi/board.c
-@@ -90,6 +90,11 @@ int board_init(void)
- if (ret)
- return ret;
-
-+#ifdef CONFIG_MACPWR
-+ gpio_request(CONFIG_MACPWR, "macpwr");
-+ gpio_direction_output(CONFIG_MACPWR, 1);
-+#endif
-+
- /* Uses dm gpio code so do this here and not in i2c_init_board() */
- return soft_i2c_board_init();
- }
---- a/board/sunxi/gmac.c
-+++ b/board/sunxi/gmac.c
-@@ -6,7 +6,7 @@
- #include <asm/arch/clock.h>
- #include <asm/arch/gpio.h>
-
--int sunxi_gmac_initialize(bd_t *bis)
-+void eth_init_board(void)
- {
- int pin;
- struct sunxi_ccm_reg *const ccm =
-@@ -79,16 +79,4 @@ int sunxi_gmac_initialize(bd_t *bis)
- for (pin = SUNXI_GPA(26); pin <= SUNXI_GPA(27); pin++)
- sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
- #endif
--
--#ifdef CONFIG_DM_ETH
-- return 0;
--#else
--# ifdef CONFIG_RGMII
-- return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_RGMII);
--# elif defined CONFIG_GMII
-- return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_GMII);
--# else
-- return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_MII);
--# endif
--#endif
- }
deleted file mode 100644
@@ -1,78 +0,0 @@
-From 948603d4d637a0e04a3214253b911cfc4ed11220 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Mon, 21 Mar 2016 14:44:35 +0100
-Subject: [PATCH] sunxi: Fix 2nd usb controller on sun4i/sun7i no longer
- working
-
-The 2nd usb controller on sun4i/sun7i has its base address 0x8000
-bytes from the 1st one, rather then 0x1000. Also the ahb clk gates
-are interleaved with the ohci clk-gates introducing a hole between
-the clks for usb1 and usb2.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Ian Campbell <ijc@hellion.org.uk>
----
- drivers/usb/host/ehci-sunxi.c | 13 +++++++++++--
- drivers/usb/host/ohci-sunxi.c | 15 ++++++++++++---
- 2 files changed, 23 insertions(+), 5 deletions(-)
-
---- a/drivers/usb/host/ehci-sunxi.c
-+++ b/drivers/usb/host/ehci-sunxi.c
-@@ -17,6 +17,14 @@
- #include <dm.h>
- #include "ehci.h"
-
-+#ifdef CONFIG_SUNXI_GEN_SUN4I
-+#define BASE_DIST 0x8000
-+#define AHB_CLK_DIST 2
-+#else
-+#define BASE_DIST 0x1000
-+#define AHB_CLK_DIST 1
-+#endif
-+
- struct ehci_sunxi_priv {
- struct ehci_ctrl ehci;
- int ahb_gate_mask; /* Mask of ahb_gate0 clk gate bits for this hcd */
-@@ -39,8 +47,9 @@ static int ehci_usb_probe(struct udevice
- #ifdef CONFIG_MACH_SUN8I_H3
- priv->ahb_gate_mask |= 1 << AHB_GATE_OFFSET_USB_OHCI0;
- #endif
-- priv->phy_index = ((u32)hccr - SUNXI_USB1_BASE) / 0x1000 + 1;
-- priv->ahb_gate_mask <<= priv->phy_index - 1;
-+ priv->phy_index = ((u32)hccr - SUNXI_USB1_BASE) / BASE_DIST;
-+ priv->ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
-+ priv->phy_index++; /* Non otg phys start at 1 */
-
- setbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
- #ifdef CONFIG_SUNXI_GEN_SUN6I
---- a/drivers/usb/host/ohci-sunxi.c
-+++ b/drivers/usb/host/ohci-sunxi.c
-@@ -17,6 +17,14 @@
- #include <usb.h>
- #include "ohci.h"
-
-+#ifdef CONFIG_SUNXI_GEN_SUN4I
-+#define BASE_DIST 0x8000
-+#define AHB_CLK_DIST 2
-+#else
-+#define BASE_DIST 0x1000
-+#define AHB_CLK_DIST 1
-+#endif
-+
- struct ohci_sunxi_priv {
- ohci_t ohci;
- int ahb_gate_mask; /* Mask of ahb_gate0 clk gate bits for this hcd */
-@@ -42,9 +50,10 @@ static int ohci_usb_probe(struct udevice
- priv->ahb_gate_mask |= 1 << AHB_GATE_OFFSET_USB_EHCI0;
- #endif
- priv->usb_gate_mask = CCM_USB_CTRL_OHCI0_CLK;
-- priv->phy_index = ((u32)regs - (SUNXI_USB1_BASE + 0x400)) / 0x1000 + 1;
-- priv->ahb_gate_mask <<= priv->phy_index - 1;
-- priv->usb_gate_mask <<= priv->phy_index - 1;
-+ priv->phy_index = ((u32)regs - (SUNXI_USB1_BASE + 0x400)) / BASE_DIST;
-+ priv->ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
-+ priv->usb_gate_mask <<= priv->phy_index;
-+ priv->phy_index++; /* Non otg phys start at 1 */
-
- setbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
- setbits_le32(&ccm->usb_clk_cfg, priv->usb_gate_mask);
deleted file mode 100644
@@ -1,31 +0,0 @@
-From 8f10b5c65611e6c15a113bf63289b6696452f90d Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sun, 20 Mar 2016 14:17:10 +0100
-Subject: [PATCH] spl: Print from which mmc slot spl is trying to boot
-
-On some sunxi boards (and presumably also non sunxi boards) u-boot can
-be either loaded from a sdcard in a micro-sd slot, or from eMMC.
-
-Print which MMC spl tries to boot from, to help debugging.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Reviewed-by: Tom Rini <trini@konsulko.com>
----
- common/spl/spl.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/common/spl/spl.c
-+++ b/common/spl/spl.c
-@@ -210,9 +210,9 @@ struct boot_device_name boot_name_table[
- { BOOT_DEVICE_RAM, "RAM" },
- #endif
- #ifdef CONFIG_SPL_MMC_SUPPORT
-- { BOOT_DEVICE_MMC1, "MMC" },
-- { BOOT_DEVICE_MMC2, "MMC" },
-- { BOOT_DEVICE_MMC2_2, "MMC" },
-+ { BOOT_DEVICE_MMC1, "MMC1" },
-+ { BOOT_DEVICE_MMC2, "MMC2" },
-+ { BOOT_DEVICE_MMC2_2, "MMC2_2" },
- #endif
- #ifdef CONFIG_SPL_NAND_SUPPORT
- { BOOT_DEVICE_NAND, "NAND" },
deleted file mode 100644
@@ -1,39 +0,0 @@
-From 60fa63012fcdc3c4ec1497bf5e358f0a90b40949 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Fri, 18 Mar 2016 08:42:01 +0100
-Subject: [PATCH] sunxi: Add support for USB vbus pin for USB3
-
-The H3 has USB0 - USB3, add support for having a USB vbus pin for USB3.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Ian Campbell <ijc@hellion.org.uk>
----
- arch/arm/cpu/armv7/sunxi/usb_phy.c | 1 +
- board/sunxi/Kconfig | 6 ++++++
- 2 files changed, 7 insertions(+)
-
---- a/arch/arm/cpu/armv7/sunxi/usb_phy.c
-+++ b/arch/arm/cpu/armv7/sunxi/usb_phy.c
-@@ -76,6 +76,7 @@ static int get_vbus_gpio(int index)
- case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_PIN);
- case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN);
- case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN);
-+ case 3: return sunxi_name_to_gpio(CONFIG_USB3_VBUS_PIN);
- }
- return -EINVAL;
- }
---- a/board/sunxi/Kconfig
-+++ b/board/sunxi/Kconfig
-@@ -341,6 +341,12 @@ config USB2_VBUS_PIN
- ---help---
- See USB1_VBUS_PIN help text.
-
-+config USB3_VBUS_PIN
-+ string "Vbus enable pin for usb3 (ehci2)"
-+ default ""
-+ ---help---
-+ See USB1_VBUS_PIN help text.
-+
- config I2C0_ENABLE
- bool "Enable I2C/TWI controller 0"
- default y if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
deleted file mode 100644
@@ -1,31 +0,0 @@
-From ce0d0926758f631fdd655d438acd32d5935d43a4 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Fri, 18 Mar 2016 08:45:21 +0100
-Subject: [PATCH] sunxi: Specify USB vbus pins for orangepi boards
-
-This fixes the USB ports not working on the orangepi_plus and stops us
-from messing with gpio-s which we should not touch on the orangepi_pc.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Ian Campbell <ijc@hellion.org.uk>
----
- configs/orangepi_pc_defconfig | 3 +++
- configs/orangepi_plus_defconfig | 1 +
- 2 files changed, 4 insertions(+)
-
---- a/configs/orangepi_pc_defconfig
-+++ b/configs/orangepi_pc_defconfig
-@@ -14,3 +14,6 @@ CONFIG_SPL=y
- CONFIG_CMD_GPIO=y
- CONFIG_SY8106A_POWER=y
- CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB1_VBUS_PIN=""
-+CONFIG_USB2_VBUS_PIN=""
-+CONFIG_USB3_VBUS_PIN=""
---- a/configs/orangepi_plus_defconfig
-+++ b/configs/orangepi_plus_defconfig
-@@ -14,3 +14,4 @@ CONFIG_SPL=y
- CONFIG_CMD_GPIO=y
- CONFIG_SY8106A_POWER=y
- CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB1_VBUS_PIN="PG13"
deleted file mode 100644
@@ -1,33 +0,0 @@
-From 70fe24ed93fa90eb407d18a5fc9d9ad85ac9184c Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Wed, 27 Jan 2016 16:34:43 +0800
-Subject: [PATCH] sunxi: Support SID e-fuses on A83T and H3
-
-On the A83T and H3, the SID block is at a different address.
-Furthurmore, the e-fuses are at an offset of 0x200 within the
-hardware's address space.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Acked-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
-+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
-@@ -82,7 +82,14 @@
- #define SUNXI_AD_DA_BASE 0x01c22c00
- #define SUNXI_KEYPAD_BASE 0x01c23000
- #define SUNXI_TZPC_BASE 0x01c23400
-+
-+#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUN8I_H3)
-+/* SID address space starts at 0x01c1400, but e-fuse is at offset 0x200 */
-+#define SUNXI_SID_BASE 0x01c14200
-+#else
- #define SUNXI_SID_BASE 0x01c23800
-+#endif
-+
- #define SUNXI_SJTAG_BASE 0x01c23c00
-
- #define SUNXI_TP_BASE 0x01c25000
deleted file mode 100644
@@ -1,23 +0,0 @@
-From 2af25b747340c6c8f6a6b9e27632db577bf4da52 Mon Sep 17 00:00:00 2001
-From: Simon Glass <sjg@chromium.org>
-Date: Mon, 22 Feb 2016 22:55:46 -0700
-Subject: [PATCH] sunxi: Display the board model on start-up
-
-It is useful to know which sunxi board you are booting. Display this on
-start-up to avoid confusion.
-
-Signed-off-by: Simon Glass <sjg@chromium.org>
----
- include/configs/sunxi-common.h | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/include/configs/sunxi-common.h
-+++ b/include/configs/sunxi-common.h
-@@ -174,6 +174,7 @@
-
- #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */
- #define CONFIG_IDENT_STRING " Allwinner Technology"
-+#define CONFIG_DISPLAY_BOARDINFO
-
- #define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */
- #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
@@ -12,9 +12,9 @@ More specifically, the following settings are now used:
* up to 1152MHz: mul=3, div=2 (unchanged)
* above 1152MHz: mul=4, div=2 (was: mul=2, div=1)
---- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-@@ -122,11 +122,12 @@ void clock_set_pll1(unsigned int clk)
+--- a/arch/arm/mach-sunxi/clock_sun6i.c
++++ b/arch/arm/mach-sunxi/clock_sun6i.c
+@@ -107,11 +107,12 @@ void clock_set_pll1(unsigned int clk)
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
const int p = 0;
@@ -16,9 +16,9 @@ order of magnitude as Boot1.
Furthermore, a bit of documentation is added to clarify that the
required setting for the PLL LDO is 1.37v as per the A31 manual.
---- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-@@ -24,14 +24,27 @@ void clock_init_safe(void)
+--- a/arch/arm/mach-sunxi/clock_sun6i.c
++++ b/arch/arm/mach-sunxi/clock_sun6i.c
+@@ -26,13 +26,26 @@ void clock_init_safe(void)
struct sunxi_prcm_reg * const prcm =
(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
@@ -34,9 +34,9 @@ required setting for the PLL LDO is 1.37v as per the A31 manual.
clrsetbits_le32(&prcm->pll_ctrl1, ~PRCM_PLL_CTRL_LDO_KEY_MASK,
PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
- PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140));
-+ PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1370) );
++ PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1370));
clrbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK);
-
++
+ /* Give the PLL LDO voltage setting some time to take hold.
+ * Notes:
+ * 1) We need to use sdelay() as the timers aren't set up yet.
@@ -44,10 +44,9 @@ required setting for the PLL LDO is 1.37v as per the A31 manual.
+ * iterations through a loop.
+ */
+ sdelay(100000);
-+
- clock_set_pll1(408000000);
+ #endif
- writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
+ #if defined(CONFIG_MACH_SUN8I_R40) || defined(CONFIG_MACH_SUN50I)
--- a/arch/arm/include/asm/arch-sunxi/prcm.h
+++ b/arch/arm/include/asm/arch-sunxi/prcm.h
@@ -111,13 +111,13 @@
@@ -6,11 +6,11 @@ Subject: sun6i: define alternate-function for UART2 on GPG
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
-@@ -180,6 +180,7 @@ enum sunxi_gpio_number {
+@@ -186,6 +186,7 @@ enum sunxi_gpio_number {
#define SUN6I_GPG_SDC1 2
#define SUN8I_GPG_SDC1 2
#define SUN6I_GPG_TWI3 2
+#define SUN6I_GPG_UART2 2
#define SUN5I_GPG_UART1 4
- #define SUN4I_GPH_SDC1 5
+ #define SUN6I_GPH_PWM 2
@@ -4,9 +4,9 @@ Date: Tue, 16 Jun 2015 10:53:11 +0200
Subject: ARM: sun6i: Support console on UART2 (GPG6/GPG7)
---- a/arch/arm/cpu/armv7/sunxi/board.c
-+++ b/arch/arm/cpu/armv7/sunxi/board.c
-@@ -88,6 +88,10 @@ static int gpio_init(void)
+--- a/arch/arm/mach-sunxi/board.c
++++ b/arch/arm/mach-sunxi/board.c
+@@ -126,6 +126,10 @@ static int gpio_init(void)
sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1);
sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1);
sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP);
@@ -19,7 +19,7 @@ Subject: ARM: sun6i: Support console on UART2 (GPG6/GPG7)
sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_GPB_UART2);
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
-@@ -260,6 +260,8 @@ extern int soft_i2c_gpio_scl;
+@@ -259,6 +259,8 @@ extern int soft_i2c_gpio_scl;
#endif
#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200"
@@ -4,9 +4,9 @@ Date: Tue, 16 Jun 2015 10:59:38 +0200
Subject: ARM: sunxi: Make CONS_INDEX configurable
---- a/board/sunxi/Kconfig
-+++ b/board/sunxi/Kconfig
-@@ -229,6 +229,14 @@ config SYS_BOARD
+--- a/arch/arm/mach-sunxi/Kconfig
++++ b/arch/arm/mach-sunxi/Kconfig
+@@ -412,6 +412,14 @@ config SYS_BOARD
config SYS_SOC
default "sunxi"
This needs swig and a host dtc install on the host now. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> --- package/boot/uboot-sunxi/Makefile | 4 +- .../patches/002-add-olimex-a13-som.patch | 3 +- .../patches/003-add-theobroma-a31-pangolin.patch | 22 +- .../patches/010-dt-sync-files-with-kernel.patch | 1403 ---- .../011-dt-sync-dts-files-with-kernel.patch | 7211 -------------------- .../patches/012-sun6i-fix-clock_twi_onoff.patch | 38 - .../patches/013-enable-realtek-phy.patch | 24 - .../uboot-sunxi/patches/014-fix-gmac-init.patch | 127 - .../patches/015-fix-2nd-usb-ctrler-on-sun47i.patch | 78 - .../patches/016-spl-print-mmc-slot.patch | 31 - .../017-usb-add-support-for-usb3-vbus-pin.patch | 39 - .../018-usb-specify-vbus-pins-on-orangepis.patch | 31 - .../019-sid-add-efuse-support-for-h3-a83t.patch | 33 - .../020-boot-display-board-model-on-startup.patch | 23 - .../091-sun6i-sync-PLL1-multdiv-with-Boot1.patch | 6 +- .../patches/093-sun6i-fix-PLL-LDO-voltselect.patch | 15 +- .../patches/100-sun6i-alternate-on-UART2.patch | 4 +- .../101-sun6i-support-console-on-UART2.patch | 8 +- .../102-sunxi-make_CONS_INDEX-configurable.patch | 6 +- 19 files changed, 29 insertions(+), 9077 deletions(-) delete mode 100644 package/boot/uboot-sunxi/patches/010-dt-sync-files-with-kernel.patch delete mode 100644 package/boot/uboot-sunxi/patches/011-dt-sync-dts-files-with-kernel.patch delete mode 100644 package/boot/uboot-sunxi/patches/012-sun6i-fix-clock_twi_onoff.patch delete mode 100644 package/boot/uboot-sunxi/patches/013-enable-realtek-phy.patch delete mode 100644 package/boot/uboot-sunxi/patches/014-fix-gmac-init.patch delete mode 100644 package/boot/uboot-sunxi/patches/015-fix-2nd-usb-ctrler-on-sun47i.patch delete mode 100644 package/boot/uboot-sunxi/patches/016-spl-print-mmc-slot.patch delete mode 100644 package/boot/uboot-sunxi/patches/017-usb-add-support-for-usb3-vbus-pin.patch delete mode 100644 package/boot/uboot-sunxi/patches/018-usb-specify-vbus-pins-on-orangepis.patch delete mode 100644 package/boot/uboot-sunxi/patches/019-sid-add-efuse-support-for-h3-a83t.patch delete mode 100644 package/boot/uboot-sunxi/patches/020-boot-display-board-model-on-startup.patch