@@ -2728,3 +2728,11 @@ to receive the topmost interrupt vector.
When disabled (args[0] == 0), behavior is as if this facility is unsupported.
When this capability is enabled, KVM_EXIT_EPR can occur.
+
+6.6 KVM_CAP_IRQ_MPIC
+
+Architectures: ppc
+Parameters: args[0] is the MPIC device fd
+ args[1] is the MPIC CPU number for this vcpu
+
+This capability connects the vcpu to an in-kernel MPIC device.
@@ -375,8 +375,10 @@ struct kvmppc_booke_debug_reg {
u64 dac[KVMPPC_BOOKE_MAX_DAC];
};
-#define KVMPPC_IRQCHIP_NONE 0
-#define KVMPPC_IRQCHIP_MPIC 1
+#define KVMPPC_IRQ_DEFAULT 0
+#define KVMPPC_IRQ_MPIC 1
+
+struct openpic;
struct kvm_vcpu_arch {
ulong host_stack;
@@ -557,8 +559,8 @@ struct kvm_vcpu_arch {
unsigned long magic_page_pa; /* phys addr to map the magic page to */
unsigned long magic_page_ea; /* effect. addr to map the magic page to */
- int irqchip_type;
- void *irqchip_priv;
+ int irq_type; /* one of KVM_IRQ_* */
+ struct openpic *mpic; /* KVM_IRQ_MPIC */
#ifdef CONFIG_KVM_BOOK3S_64_HV
struct kvm_vcpu_arch_shared shregs;
@@ -273,6 +273,8 @@ static inline void kvmppc_set_epr(struct kvm_vcpu *vcpu, u32 epr)
}
void kvmppc_mpic_set_epr(struct kvm_vcpu *vcpu);
+int kvmppc_mpic_connect_vcpu(struct file *mpic_filp, struct kvm_vcpu *vcpu,
+ u32 cpu);
int kvm_vcpu_ioctl_config_tlb(struct kvm_vcpu *vcpu,
struct kvm_config_tlb *cfg);
@@ -430,8 +430,10 @@ static int kvmppc_booke_irqprio_deliver(struct kvm_vcpu *vcpu,
if (update_epr == true) {
if (vcpu->arch.epr_flags & KVMPPC_EPR_USER)
kvm_make_request(KVM_REQ_EPR_EXIT, vcpu);
- else if (vcpu->arch.epr_flags & KVMPPC_EPR_KERNEL)
+ else if (vcpu->arch.epr_flags & KVMPPC_EPR_KERNEL) {
+ BUG_ON(vcpu->arch.irq_type != KVMPPC_IRQ_MPIC);
kvmppc_mpic_set_epr(vcpu);
+ }
}
new_msr &= msr_mask;
@@ -1159,7 +1159,7 @@ static uint32_t openpic_iack(struct openpic *opp, struct irq_dest *dst,
void kvmppc_mpic_set_epr(struct kvm_vcpu *vcpu)
{
- struct openpic *opp = vcpu->arch.irqchip_priv;
+ struct openpic *opp = vcpu->arch.mpic;
int cpu = vcpu->vcpu_id;
unsigned long flags;
@@ -1442,10 +1442,10 @@ static void map_mmio(struct openpic *opp)
static void unmap_mmio(struct openpic *opp)
{
- BUG_ON(opp->mmio_mapped);
- opp->mmio_mapped = false;
-
- kvm_io_bus_unregister_dev(opp->kvm, KVM_MMIO_BUS, &opp->mmio);
+ if (opp->mmio_mapped) {
+ opp->mmio_mapped = false;
+ kvm_io_bus_unregister_dev(opp->kvm, KVM_MMIO_BUS, &opp->mmio);
+ }
}
static int set_base_addr(struct openpic *opp, struct kvm_device_attr *attr)
@@ -1683,6 +1683,45 @@ static const struct file_operations kvm_mpic_fops = {
.release = kvm_mpic_release,
};
+int kvmppc_mpic_connect_vcpu(struct file *mpic_filp, struct kvm_vcpu *vcpu,
+ u32 cpu)
+{
+ struct openpic *opp = mpic_filp->private_data;
+ int ret = 0;
+
+ if (mpic_filp->f_op != &kvm_mpic_fops)
+ return -EPERM;
+ if (opp->kvm != vcpu->kvm)
+ return -EPERM;
+ if (cpu < 0 || cpu >= MAX_CPU)
+ return -EPERM;
+
+ spin_lock_irq(&opp->lock);
+
+ if (opp->dst[cpu].vcpu) {
+ ret = -EEXIST;
+ goto out;
+ }
+ if (vcpu->arch.irq_type) {
+ return -EBUSY;
+ goto out;
+ }
+
+ opp->dst[cpu].vcpu = vcpu;
+ opp->nb_cpus = max(opp->nb_cpus, cpu + 1);
+
+ vcpu->arch.mpic = opp;
+ vcpu->arch.irq_type = KVMPPC_IRQ_MPIC;
+ atomic_inc(&opp->users);
+
+ if (opp->mpic_mode_mask == GCR_MODE_PROXY)
+ vcpu->arch.epr_flags |= KVMPPC_EPR_KERNEL;
+
+out:
+ spin_unlock_irq(&opp->lock);
+ return ret;
+}
+
int kvm_create_mpic(struct kvm *kvm, u32 type)
{
struct openpic *opp;
@@ -25,6 +25,7 @@
#include <linux/hrtimer.h>
#include <linux/fs.h>
#include <linux/slab.h>
+#include <linux/file.h>
#include <asm/cputable.h>
#include <asm/uaccess.h>
#include <asm/kvm_ppc.h>
@@ -327,6 +328,9 @@ int kvm_dev_ioctl_check_extension(long ext)
#if defined(CONFIG_KVM_E500V2) || defined(CONFIG_KVM_E500MC)
case KVM_CAP_SW_TLB:
#endif
+#ifdef CONFIG_KVM_MPIC
+ case KVM_CAP_IRQ_MPIC:
+#endif
r = 1;
break;
case KVM_CAP_COALESCED_MMIO:
@@ -461,9 +465,9 @@ void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
kvmppc_remove_vcpu_debugfs(vcpu);
- switch (vcpu->arch.irqchip_type) {
- case KVMPPC_IRQCHIP_MPIC:
- mpic_put(vcpu->arch.irqchip_priv);
+ switch (vcpu->arch.irq_type) {
+ case KVMPPC_IRQ_MPIC:
+ mpic_put(vcpu->arch.mpic);
break;
}
@@ -801,6 +805,21 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
break;
}
#endif
+#ifdef CONFIG_KVM_MPIC
+ case KVM_CAP_IRQ_MPIC: {
+ struct file *filp;
+
+ r = -EBADF;
+ filp = fget(cap->args[0]);
+ if (!filp)
+ break;
+
+ r = kvmppc_mpic_connect_vcpu(filp, vcpu, cap->args[1]);
+
+ fput(filp);
+ break;
+ }
+#endif
default:
r = -EINVAL;
break;
@@ -669,6 +669,7 @@ struct kvm_ppc_smmu_info {
#define KVM_CAP_ARM_PSCI 87
#define KVM_CAP_ARM_SET_DEVICE_ADDR 88
#define KVM_CAP_DEVICE_CTRL 89
+#define KVM_CAP_IRQ_MPIC 90
#ifdef KVM_CAP_IRQ_ROUTING
Enabling this capability connects the vcpu to the designated in-kernel MPIC. Using explicit connections between vcpus and irqchips allows for flexibility, but the main benefit at the moment is that it simplifies the code -- KVM doesn't need vm-global state to remember which MPIC object is associated with this vm, and it doesn't need to care about ordering between irqchip creation and vcpu creation. Signed-off-by: Scott Wood <scottwood@freescale.com> --- Documentation/virtual/kvm/api.txt | 8 ++++++ arch/powerpc/include/asm/kvm_host.h | 10 ++++--- arch/powerpc/include/asm/kvm_ppc.h | 2 ++ arch/powerpc/kvm/booke.c | 4 ++- arch/powerpc/kvm/mpic.c | 49 +++++++++++++++++++++++++++++++---- arch/powerpc/kvm/powerpc.c | 25 +++++++++++++++--- include/uapi/linux/kvm.h | 1 + 7 files changed, 86 insertions(+), 13 deletions(-)