diff mbox series

[net-next,v5,09/23] net: phy: start using genphy_c45_ethtool_get/set_eee()

Message ID 20230206135050.3237952-10-o.rempel@pengutronix.de
State Handled Elsewhere
Headers show
Series net: add EEE support for KSZ9477 and AR8035 with i.MX6 | expand

Commit Message

Oleksij Rempel Feb. 6, 2023, 1:50 p.m. UTC 
All preparations are done. Now we can start using new functions and remove
the old code.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/phy/phy.c | 60 ++-----------------------------------------
 1 file changed, 2 insertions(+), 58 deletions(-)

Comments

Andrew Lunn Feb. 7, 2023, 1:05 a.m. UTC | #1 
On Mon, Feb 06, 2023 at 02:50:36PM +0100, Oleksij Rempel wrote:
> All preparations are done. Now we can start using new functions and remove
> the old code.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

This change looks correct, in that it just replaces code with other
equivalent code.

But looking at it, i started to wonder about locking. I don't see
phydev->lock held anywhere. But it does access members of phydev, in
particular speed and duplex. If the PHY state machine is running at
the same time, and phy_read_status() is called, those members can
contain invalid information.

So i think another patch is needed to add locking to these two
functions.

Otherwise:

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 36533746630e..2f1041a7211e 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1517,33 +1517,10 @@  EXPORT_SYMBOL(phy_get_eee_err);
  */
 int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
 {
-	int val;
-
 	if (!phydev->drv)
 		return -EIO;
 
-	/* Get Supported EEE */
-	val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
-	if (val < 0)
-		return val;
-	data->supported = mmd_eee_cap_to_ethtool_sup_t(val);
-
-	/* Get advertisement EEE */
-	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
-	if (val < 0)
-		return val;
-	data->advertised = mmd_eee_adv_to_ethtool_adv_t(val);
-	data->eee_enabled = !!data->advertised;
-
-	/* Get LP advertisement EEE */
-	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE);
-	if (val < 0)
-		return val;
-	data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val);
-
-	data->eee_active = !!(data->advertised & data->lp_advertised);
-
-	return 0;
+	return genphy_c45_ethtool_get_eee(phydev, data);
 }
 EXPORT_SYMBOL(phy_ethtool_get_eee);
 
@@ -1556,43 +1533,10 @@  EXPORT_SYMBOL(phy_ethtool_get_eee);
  */
 int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
 {
-	int cap, old_adv, adv = 0, ret;
-
 	if (!phydev->drv)
 		return -EIO;
 
-	/* Get Supported EEE */
-	cap = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
-	if (cap < 0)
-		return cap;
-
-	old_adv = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
-	if (old_adv < 0)
-		return old_adv;
-
-	if (data->eee_enabled) {
-		adv = !data->advertised ? cap :
-		      ethtool_adv_to_mmd_eee_adv_t(data->advertised) & cap;
-		/* Mask prohibited EEE modes */
-		adv &= ~phydev->eee_broken_modes;
-	}
-
-	if (old_adv != adv) {
-		ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, adv);
-		if (ret < 0)
-			return ret;
-
-		/* Restart autonegotiation so the new modes get sent to the
-		 * link partner.
-		 */
-		if (phydev->autoneg == AUTONEG_ENABLE) {
-			ret = phy_restart_aneg(phydev);
-			if (ret < 0)
-				return ret;
-		}
-	}
-
-	return 0;
+	return genphy_c45_ethtool_set_eee(phydev, data);
 }
 EXPORT_SYMBOL(phy_ethtool_set_eee);