diff mbox series

[net-next] i40e: xsk: read the XDP program once per NAPI

Message ID 20220622091447.243101-1-ciara.loftus@intel.com
State Superseded
Headers show
Series [net-next] i40e: xsk: read the XDP program once per NAPI | expand

Commit Message

Ciara Loftus June 22, 2022, 9:14 a.m. UTC
Similar to how it's done in the ice driver since 'eb087cd82864 ("ice:
propagate xdp_ring onto rx_ring")', read the XDP program once per NAPI
instead of once per descriptor cleaned. I measured an improvement in
throughput of 2% for the AF_XDP xdpsock l2fwd benchmark in busy polling
mode on my platform.

Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_xsk.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

Comments

Zvi Effron June 22, 2022, 5:24 p.m. UTC | #1
On Wed, Jun 22, 2022 at 4:15 AM Ciara Loftus <ciara.loftus@intel.com> wrote:
>
> Similar to how it's done in the ice driver since 'eb087cd82864 ("ice:
> propagate xdp_ring onto rx_ring")', read the XDP program once per NAPI
> instead of once per descriptor cleaned. I measured an improvement in
> throughput of 2% for the AF_XDP xdpsock l2fwd benchmark in busy polling
> mode on my platform.
>

Should the same improvement be made to i40e_run_xdp/i40e_clean_rx_irq for the
non-AF_XDP case?

> Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
> ---
>  drivers/net/ethernet/intel/i40e/i40e_xsk.c | 16 +++++++++-------
>  1 file changed, 9 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_xsk.c b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
> index af3e7e6afc85..2f422c61ac11 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_xsk.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
> @@ -146,17 +146,13 @@ int i40e_xsk_pool_setup(struct i40e_vsi *vsi, struct xsk_buff_pool *pool,
>   *
>   * Returns any of I40E_XDP_{PASS, CONSUMED, TX, REDIR}
>   **/
> -static int i40e_run_xdp_zc(struct i40e_ring *rx_ring, struct xdp_buff *xdp)
> +static int i40e_run_xdp_zc(struct i40e_ring *rx_ring, struct xdp_buff *xdp,
> +                          struct bpf_prog *xdp_prog)
>  {
>         int err, result = I40E_XDP_PASS;
>         struct i40e_ring *xdp_ring;
> -       struct bpf_prog *xdp_prog;
>         u32 act;
>
> -       /* NB! xdp_prog will always be !NULL, due to the fact that
> -        * this path is enabled by setting an XDP program.
> -        */
> -       xdp_prog = READ_ONCE(rx_ring->xdp_prog);
>         act = bpf_prog_run_xdp(xdp_prog, xdp);
>
>         if (likely(act == XDP_REDIRECT)) {
> @@ -339,9 +335,15 @@ int i40e_clean_rx_irq_zc(struct i40e_ring *rx_ring, int budget)
>         u16 next_to_clean = rx_ring->next_to_clean;
>         u16 count_mask = rx_ring->count - 1;
>         unsigned int xdp_res, xdp_xmit = 0;
> +       struct bpf_prog *xdp_prog;
>         bool failure = false;
>         u16 cleaned_count;
>
> +       /* NB! xdp_prog will always be !NULL, due to the fact that
> +        * this path is enabled by setting an XDP program.
> +        */
> +       xdp_prog = READ_ONCE(rx_ring->xdp_prog);
> +
>         while (likely(total_rx_packets < (unsigned int)budget)) {
>                 union i40e_rx_desc *rx_desc;
>                 unsigned int rx_packets;
> @@ -378,7 +380,7 @@ int i40e_clean_rx_irq_zc(struct i40e_ring *rx_ring, int budget)
>                 xsk_buff_set_size(bi, size);
>                 xsk_buff_dma_sync_for_cpu(bi, rx_ring->xsk_pool);
>
> -               xdp_res = i40e_run_xdp_zc(rx_ring, bi);
> +               xdp_res = i40e_run_xdp_zc(rx_ring, bi, xdp_prog);
>                 i40e_handle_xdp_result_zc(rx_ring, bi, rx_desc, &rx_packets,
>                                           &rx_bytes, size, xdp_res, &failure);
>                 if (failure)
> --
> 2.25.1
>
Jakub Kicinski June 23, 2022, 12:35 a.m. UTC | #2
On Wed, 22 Jun 2022 09:14:47 +0000 Ciara Loftus wrote:
> Similar to how it's done in the ice driver since 'eb087cd82864 ("ice:
> propagate xdp_ring onto rx_ring")', read the XDP program once per NAPI
> instead of once per descriptor cleaned. I measured an improvement in
> throughput of 2% for the AF_XDP xdpsock l2fwd benchmark in busy polling
> mode on my platform.

drivers/net/ethernet/intel/i40e/i40e_xsk.c:151: warning: Function parameter or member 'xdp_prog' not described in 'i40e_run_xdp_zc'
diff mbox series

Patch

diff --git a/drivers/net/ethernet/intel/i40e/i40e_xsk.c b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
index af3e7e6afc85..2f422c61ac11 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_xsk.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
@@ -146,17 +146,13 @@  int i40e_xsk_pool_setup(struct i40e_vsi *vsi, struct xsk_buff_pool *pool,
  *
  * Returns any of I40E_XDP_{PASS, CONSUMED, TX, REDIR}
  **/
-static int i40e_run_xdp_zc(struct i40e_ring *rx_ring, struct xdp_buff *xdp)
+static int i40e_run_xdp_zc(struct i40e_ring *rx_ring, struct xdp_buff *xdp,
+			   struct bpf_prog *xdp_prog)
 {
 	int err, result = I40E_XDP_PASS;
 	struct i40e_ring *xdp_ring;
-	struct bpf_prog *xdp_prog;
 	u32 act;
 
-	/* NB! xdp_prog will always be !NULL, due to the fact that
-	 * this path is enabled by setting an XDP program.
-	 */
-	xdp_prog = READ_ONCE(rx_ring->xdp_prog);
 	act = bpf_prog_run_xdp(xdp_prog, xdp);
 
 	if (likely(act == XDP_REDIRECT)) {
@@ -339,9 +335,15 @@  int i40e_clean_rx_irq_zc(struct i40e_ring *rx_ring, int budget)
 	u16 next_to_clean = rx_ring->next_to_clean;
 	u16 count_mask = rx_ring->count - 1;
 	unsigned int xdp_res, xdp_xmit = 0;
+	struct bpf_prog *xdp_prog;
 	bool failure = false;
 	u16 cleaned_count;
 
+	/* NB! xdp_prog will always be !NULL, due to the fact that
+	 * this path is enabled by setting an XDP program.
+	 */
+	xdp_prog = READ_ONCE(rx_ring->xdp_prog);
+
 	while (likely(total_rx_packets < (unsigned int)budget)) {
 		union i40e_rx_desc *rx_desc;
 		unsigned int rx_packets;
@@ -378,7 +380,7 @@  int i40e_clean_rx_irq_zc(struct i40e_ring *rx_ring, int budget)
 		xsk_buff_set_size(bi, size);
 		xsk_buff_dma_sync_for_cpu(bi, rx_ring->xsk_pool);
 
-		xdp_res = i40e_run_xdp_zc(rx_ring, bi);
+		xdp_res = i40e_run_xdp_zc(rx_ring, bi, xdp_prog);
 		i40e_handle_xdp_result_zc(rx_ring, bi, rx_desc, &rx_packets,
 					  &rx_bytes, size, xdp_res, &failure);
 		if (failure)