diff mbox series

[v1,1/1] igc: Remove unused MDICNFG register

Message ID 20210502105708.3016965-1-sasha.neftin@intel.com
State Accepted
Delegated to: Anthony Nguyen
Headers show
Series [v1,1/1] igc: Remove unused MDICNFG register | expand

Commit Message

Sasha Neftin May 2, 2021, 10:57 a.m. UTC
The MDICNFG register from igc registers is not used so remove it.

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
---
 drivers/net/ethernet/intel/igc/igc_regs.h | 1 -
 1 file changed, 1 deletion(-)

Comments

Fuxbrumer, Devora May 20, 2021, 6:50 a.m. UTC | #1
On 02/05/2021 13:57, Sasha Neftin wrote:
> The MDICNFG register from igc registers is not used so remove it.
> 
> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
> ---
>   drivers/net/ethernet/intel/igc/igc_regs.h | 1 -
>   1 file changed, 1 deletion(-)
> 
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
diff mbox series

Patch

diff --git a/drivers/net/ethernet/intel/igc/igc_regs.h b/drivers/net/ethernet/intel/igc/igc_regs.h
index cc174853554b..2491d565d758 100644
--- a/drivers/net/ethernet/intel/igc/igc_regs.h
+++ b/drivers/net/ethernet/intel/igc/igc_regs.h
@@ -10,7 +10,6 @@ 
 #define IGC_EECD		0x00010  /* EEPROM/Flash Control - RW */
 #define IGC_CTRL_EXT		0x00018  /* Extended Device Control - RW */
 #define IGC_MDIC		0x00020  /* MDI Control - RW */
-#define IGC_MDICNFG		0x00E04  /* MDC/MDIO Configuration - RW */
 #define IGC_CONNSW		0x00034  /* Copper/Fiber switch control - RW */
 #define IGC_I225_PHPM		0x00E14  /* I225 PHY Power Management */
 #define IGC_GPHY_VERSION	0x0001E  /* I225 gPHY Firmware Version */