@@ -1415,6 +1415,11 @@ ifdef CONFIG_NO_TKIP
CFLAGS += -DCONFIG_NO_TKIP
endif
+ifdef CONFIG_APUP
+CFLAGS += -DCONFIG_APUP
+OBJS += ../src/ap/apup.o
+endif
+
$(DESTDIR)$(BINDIR)/%: %
install -D $(<) $(@)
@@ -5058,6 +5058,14 @@ static int hostapd_config_fill(struct
hostapd_config *conf,
bss->mld_indicate_disabled = atoi(pos);
#endif /* CONFIG_TESTING_OPTIONS */
#endif /* CONFIG_IEEE80211BE */
+#ifdef CONFIG_APUP
+ } else if (os_strcmp(buf, "apup") == 0) {
+ bss->apup = !!atoi(pos);
+ if(bss->apup) bss->wds_sta = 1;
+ } else if (os_strcmp(buf, "apup_peer_ifname_prefix") == 0) {
+ os_strlcpy( bss->apup_peer_ifname_prefix,
+ pos, sizeof(bss->apup_peer_ifname_prefix) );
+#endif // def CONFIG_APUP
} else {
wpa_printf(MSG_ERROR,
"Line %d: unknown configuration item '%s'",
@@ -970,6 +970,35 @@ struct hostapd_bss_config {
bool mld_indicate_disabled;
#endif /* CONFIG_TESTING_OPTIONS */
#endif /* CONFIG_IEEE80211BE */
+
+#ifdef CONFIG_APUP
+ /**
+ * Access Point Micro Peering
+ * A simpler and more useful successor to Ad Hoc,
+ * Wireless Distribution System, 802.11s mesh mode, Multi-AP and
EasyMesh.
+ *
+ * Almost plain APs communicate between them via 4-address mode,
like in WDS
+ * but all of them are AP, so they can eventually communicate
also with
+ * plain stations and more AP nodes in sight.
+ * Low hardware requirements, just AP mode support + 4-address
mode, and no
+ * more unnecessary complications, like hardcoded bridging or
routing
+ * algorithm in WiFi stack.
+ * For each AP in sight an interface is created, and then it can
be used as
+ * convenient in each case, bridging, routing etc.
+ */
+ bool apup;
+
+ /**
+ * In 4-address mode each peer AP in sight is associated to its own
+ * interface so we have more flexibility in "user-space".
+ * Those interfaces could be simply bridged in a trivial
topology (which
+ * happens automatically if wds_bridge is not an empty string),
or feeded to
+ * a routing daemon.
+ *
+ * If not defined interface names are generated following the
WDS convention.
+ */
+ char apup_peer_ifname_prefix[IFNAMSIZ + 1];
+#endif /* CONFIG_APUP */
};
/**
@@ -381,12 +381,39 @@ int hostapd_vlan_if_remove(struct hostapd_data
*hapd, const char *ifname)
int hostapd_set_wds_sta(struct hostapd_data *hapd, char *ifname_wds,
const u8 *addr, int aid, int val)
{
- const char *bridge = NULL;
-
if (hapd->driver == NULL || hapd->driver->set_wds_sta == NULL)
return -1;
+
+ const char *bridge = NULL;
+ char ifName[IFNAMSIZ + 1];
+
+ int mRet = 0;
+
+#ifdef CONFIG_APUP
+ if(hapd->conf->apup && hapd->conf->apup_peer_ifname_prefix[0])
+ {
+ mRet = os_snprintf(
+ ifName, sizeof(ifName), "%s%d",
+ hapd->conf->apup_peer_ifname_prefix, aid );
+ }
+ else
+#endif // def CONFIG_APUP
+ mRet = os_snprintf(
+ ifName, sizeof(ifName), "%s.sta%d",
+ hapd->conf->iface, aid );
+
+ if (mRet >= (int) sizeof(ifName))
+ wpa_printf( MSG_WARNING,
+ "nl80211: WDS interface name was truncated" );
+ else if (mRet < 0)
+ return mRet;
+
+ // Pass back to the caller the resulting interface name
+ if (ifname_wds) os_strlcpy(ifname_wds, ifName, IFNAMSIZ + 1);
+
if (hapd->conf->wds_bridge[0])
bridge = hapd->conf->wds_bridge;
+
return hapd->driver->set_wds_sta(hapd->drv_priv, addr, aid, val,
bridge, ifname_wds);
}
@@ -33,6 +33,9 @@ int hostapd_set_drv_ieee8021x(struct hostapd_data
*hapd, const char *ifname,
int enabled);
int hostapd_vlan_if_add(struct hostapd_data *hapd, const char *ifname);
int hostapd_vlan_if_remove(struct hostapd_data *hapd, const char *ifname);
+
+/** @param val as per nl80211 driver implementation, 1 means add 0
means remove
+ */
int hostapd_set_wds_sta(struct hostapd_data *hapd, char *ifname_wds,
const u8 *addr, int aid, int val);
new file mode 100644
@@ -0,0 +1,149 @@
+/*
+ * hostapd / APuP Access Point Micro Peering
+ *
+ * Copyright (C) 2023-2024 Gioacchino Mazzurco <gio@polymathes.cc>
+ * Copyright (C) 2023-2024 Asociación Civil Altermundi
<info@altermundi.net>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+/* Be extremely careful altering include order, move just one in the
wrong place
+ * and you will start getting a bunch of error of undefined bool,
size_t etc. */
+
+#include "utils/includes.h"
+#include "utils/common.h"
+#include "utils/os.h"
+
+#include "apup.h"
+
+#include "drivers/driver.h"
+#include "wpa_auth.h"
+#include "ap_mlme.h"
+#include "ieee802_11.h"
+#include "ap_drv_ops.h"
+
+void apup_process_beacon(struct hostapd_data *hapd,
+ const struct ieee80211_mgmt *mgmt, size_t len,
+ const struct ieee802_11_elems *elems )
+{
+ if(!os_memcmp(hapd->own_addr, mgmt->bssid, ETH_ALEN))
+ {
+ wpa_printf( MSG_WARNING,
+ "apup_process_beacon(...) own beacon
elems.ssid %.*s",
+ (int) elems->ssid_len, elems->ssid );
+ return;
+ }
+
+ if( elems->ssid_len != hapd->conf->ssid.ssid_len ||
+ os_memcmp(elems->ssid, hapd->conf->ssid.ssid,
elems->ssid_len) )
+ return;
+
+ struct sta_info* sta_ret = ap_get_sta(hapd, mgmt->bssid);
+ if(sta_ret) return;
+
+ sta_ret = ap_sta_add(hapd, mgmt->bssid);
+
+ /* TODO: this has been added just to making compiler happy after
breaking
+ * changes introduced in
11a607d121df512e010148bedcb4263a03329dc7 to support
+ * IEEE80211BE Multi Link Operation. Look at that commit with
more time and
+ * understand what could be a proper implementation in this
context too
+ */
+ const u8 *mld_link_addr = NULL;
+ bool mld_link_sta = false;
+
+ /* First add the station without more information */
+ int aRet = hostapd_sta_add(
+ hapd, mgmt->bssid, sta_ret->aid, 0,
+ NULL, 0, 0, NULL, NULL, NULL, 0, NULL, 0, NULL,
+ sta_ret->flags, 0, 0, 0,
+ 0, // 0 add, 1 set
+ mld_link_addr, mld_link_sta );
+
+ sta_ret->flags |= WLAN_STA_AUTH;
+ wpa_auth_sm_event(sta_ret->wpa_sm, WPA_AUTH);
+
+ /* TODO: Investigate if supporting WPA or other encryption
method is
+ * possible */
+ sta_ret->auth_alg = WLAN_AUTH_OPEN;
+ mlme_authenticate_indication(hapd, sta_ret);
+
+ sta_ret->capability = le_to_host16(mgmt->u.beacon.capab_info);
+
+ if (sta_ret->capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
+ sta_ret->flags |= WLAN_STA_SHORT_PREAMBLE;
+ else
+ sta_ret->flags &= ~WLAN_STA_SHORT_PREAMBLE;
+
+ copy_supp_rates(hapd, sta_ret, elems);
+
+ /* Whithout this flag copy_sta_[v]ht_capab will disable [V]HT
+ * capabilities even if available */
+ if(elems->ht_capabilities || elems->vht_capabilities)
+ sta_ret->flags |= WLAN_STA_WMM;
+
+ copy_sta_ht_capab(hapd, sta_ret, elems->ht_capabilities);
+#ifdef CONFIG_IEEE80211AC
+ copy_sta_vht_capab(hapd, sta_ret, elems->vht_capabilities);
+ copy_sta_vht_oper(hapd, sta_ret, elems->vht_operation);
+ copy_sta_vendor_vht(hapd, sta_ret, elems->vendor_vht,
elems->vendor_vht_len);
+#endif // def CONFIG_IEEE80211AC
+#ifdef CONFIG_IEEE80211AX
+ copy_sta_he_6ghz_capab(hapd, sta_ret, elems->he_6ghz_band_cap);
+#endif // def CONFIG_IEEE80211AX
+#ifdef CONFIG_IEEE80211BE
+ copy_sta_eht_capab( hapd, sta_ret,
+ IEEE80211_MODE_AP, // TODO: Make sure is the
right value
+ elems->he_capabilities,
elems->he_capabilities_len,
+ elems->eht_capabilities,
elems->eht_capabilities_len);
+#endif //def CONFIG_IEEE80211BE
+
+ update_ht_state(hapd, sta_ret);
+
+ if (hostapd_get_aid(hapd, sta_ret) < 0)
+ {
+ wpa_printf( MSG_INFO, "apup_process_beacon(...) No room
for more AIDs");
+ return;
+ }
+
+ sta_ret->flags |= WLAN_STA_ASSOC_REQ_OK;
+
+ /* Make sure that the previously registered inactivity timer
will not
+ * remove the STA immediately. */
+ sta_ret->timeout_next = STA_NULLFUNC;
+
+ sta_ret->flags |= WLAN_STA_AUTH | WLAN_STA_ASSOC;
+
+ /* Then set the paramethers */
+ int sRet = hostapd_sta_add(
+ hapd, mgmt->bssid, sta_ret->aid,
+ sta_ret->capability,
+ sta_ret->supported_rates, sta_ret->supported_rates_len,
+ 0, // u16 listen_interval TODO ?
+ sta_ret->ht_capabilities,
+ sta_ret->vht_capabilities,
+ sta_ret->he_capab, sta_ret->he_capab_len,
+ sta_ret->eht_capab, sta_ret->eht_capab_len,
+ sta_ret->he_6ghz_capab,
+ sta_ret->flags,
+ 0, // u8 qosinfo
+ sta_ret->vht_opmode,
+ 0, // int supp_p2p_ps
+ 1, // 0 add, 1 set
+ mld_link_addr, mld_link_sta );
+
+ ap_sta_set_authorized(hapd, sta_ret, 1);
+ hostapd_set_sta_flags(hapd, sta_ret);
+
+ char mIfname[IFNAMSIZ + 1];
+ os_memset(mIfname, 0, IFNAMSIZ + 1);
+
+ // last param 1 means add 0 means remove
+ int mRet = hostapd_set_wds_sta(
+ hapd, mIfname, mgmt->bssid, sta_ret->aid, 1 );
+
+ wpa_printf( MSG_INFO,
+ "apup_process_beacon(...) Added APuP peer at %s with
flags: %d,"
+ " capabilities %d",
+ mIfname, sta_ret->flags, sta_ret->capability );
+}
new file mode 100644
@@ -0,0 +1,25 @@
+/*
+ * hostapd / APuP Access Point Micro Peering
+ *
+ * Copyright (C) 2023-2024 Gioacchino Mazzurco <gio@polymathes.cc>
+ * Copyright (C) 2023-2024 Asociación Civil Altermundi
<info@altermundi.net>
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
+ */
+
+/* Be extremely careful altering include order, move just one in the
wrong place
+ * and you will start getting a bunch of error of undefined bool,
size_t etc. */
+
+#include "utils/includes.h"
+#include "utils/common.h"
+
+#include "hostapd.h"
+#include "common/ieee802_11_defs.h"
+
+/** When beacons from other Access Point are received, if the SSID is
matching
+ * add them as APuP peers (aka WDS STA to our own AP) the same happens
on the
+ * peer when receiving our beacons */
+void apup_process_beacon(struct hostapd_data *hapd,
+ const struct ieee80211_mgmt *mgmt, size_t len,
+ const struct ieee802_11_elems *elems );
@@ -59,6 +59,9 @@
#include "nan_usd_ap.h"
#include "pasn/pasn_common.h"
+#ifdef CONFIG_APUP
+# include "apup.h"
+#endif // def CONFIG_APUP
#ifdef CONFIG_FILS
static struct wpabuf *
@@ -3469,8 +3472,8 @@ static u16 check_multi_ap(struct hostapd_data
*hapd, struct sta_info *sta,
}
-static u16 copy_supp_rates(struct hostapd_data *hapd, struct sta_info
*sta,
- struct ieee802_11_elems *elems)
+u16 copy_supp_rates(struct hostapd_data *hapd, struct sta_info *sta,
+ const struct ieee802_11_elems *elems)
{
/* Supported rates not used in IEEE 802.11ad/DMG */
if (hapd->iface->current_mode &&
@@ -5927,6 +5930,10 @@ static void handle_beacon(struct hostapd_data *hapd,
0);
ap_list_process_beacon(hapd->iface, mgmt, &elems, fi);
+
+#ifdef CONFIG_APUP
+ if(hapd->conf->apup) apup_process_beacon(hapd, mgmt, len, &elems);
+#endif // def CONFIG_APUP
}
@@ -108,6 +108,8 @@ int hostapd_process_ml_assoc_req_addr(struct
hostapd_data *hapd,
const u8 *basic_mle, size_t
basic_mle_len,
u8 *mld_addr);
int hostapd_get_aid(struct hostapd_data *hapd, struct sta_info *sta);
+u16 copy_supp_rates(struct hostapd_data *hapd, struct sta_info *sta,
+ const struct ieee802_11_elems *elems);
u16 copy_sta_ht_capab(struct hostapd_data *hapd, struct sta_info *sta,
const u8 *ht_capab);
u16 copy_sta_vendor_vht(struct hostapd_data *hapd, struct sta_info *sta,
@@ -3976,7 +3976,7 @@ struct wpa_driver_ops {
* Returns: 0 on success, -1 on failure
*/
int (*set_wds_sta)(void *priv, const u8 *addr, int aid, int val,
- const char *bridge_ifname, char *ifname_wds);
+ const char *bridge_ifname, const char *ifname_wds);
/**
* send_action - Transmit an Action frame
@@ -8415,24 +8415,14 @@ static int have_ifidx(struct
wpa_driver_nl80211_data *drv, int ifidx,
static int i802_set_wds_sta(void *priv, const u8 *addr, int aid, int val,
- const char *bridge_ifname, char *ifname_wds)
+ const char *bridge_ifname, const char *ifname_wds)
{
struct i802_bss *bss = priv;
struct wpa_driver_nl80211_data *drv = bss->drv;
- char name[IFNAMSIZ + 1];
+ const char *name = ifname_wds; // Kept to reduce changes to the
minimum
union wpa_event_data event;
int ret;
- ret = os_snprintf(name, sizeof(name), "%s.sta%d", bss->ifname,
aid);
- if (ret >= (int) sizeof(name))
- wpa_printf(MSG_WARNING,
- "nl80211: WDS interface name was truncated");
- else if (ret < 0)
- return ret;
-
- if (ifname_wds)
- os_strlcpy(ifname_wds, name, IFNAMSIZ + 1);
-