diff mbox series

[v2,3/4] MIPS: Use an autoconf template to produce `preconfigure'

Message ID alpine.DEB.2.20.2205122259160.10833@tpp.orcam.me.uk
State New
Headers show
Series Avoid relying on autoconf internals in `preconfigure' scripts | expand

Commit Message

Maciej W. Rozycki May 12, 2022, 10:29 p.m. UTC
Avoid fiddling with autoconf internals and use AC_DEFINE_UNQUOTED to 
define macros in the configuration headers rather than handcoding an 
equivalent shell sequence with the use of the `as_echo' undocumented 
variable.

Similarly use AC_MSG_ERROR for error handling rather than the internal 
undocumented `as_fn_error' variable.  Switch to using 1 as the exit code 
as it makes no sense to refer $? in the contexts involved, it's not a 
command failure handled there.
---
New change in v2.
---
 sysdeps/mips/preconfigure    |    7 +++++--
 sysdeps/mips/preconfigure.ac |   34 ++++++++++++++++++++++++++++++++++
 2 files changed, 39 insertions(+), 2 deletions(-)

glibc-mips-preconfigure-as-fn-error.diff

Comments

Andreas Schwab May 13, 2022, 8:15 a.m. UTC | #1
On Mai 12 2022, Maciej W. Rozycki wrote:

> Avoid fiddling with autoconf internals and use AC_DEFINE_UNQUOTED to 
> define macros in the configuration headers rather than handcoding an 
> equivalent shell sequence with the use of the `as_echo' undocumented 
> variable.
>
> Similarly use AC_MSG_ERROR for error handling rather than the internal 
> undocumented `as_fn_error' variable.  Switch to using 1 as the exit code 
> as it makes no sense to refer $? in the contexts involved, it's not a 
> command failure handled there.

Ok.
Maciej W. Rozycki May 13, 2022, 4:10 p.m. UTC | #2
On Fri, 13 May 2022, Andreas Schwab wrote:

> > Similarly use AC_MSG_ERROR for error handling rather than the internal 
> > undocumented `as_fn_error' variable.  Switch to using 1 as the exit code 
> > as it makes no sense to refer $? in the contexts involved, it's not a 
> > command failure handled there.
> 
> Ok.

 Series committed, thank you both for the review.

  Maciej
diff mbox series

Patch

Index: glibc/sysdeps/mips/preconfigure
===================================================================
--- glibc.orig/sysdeps/mips/preconfigure
+++ glibc/sysdeps/mips/preconfigure
@@ -1,3 +1,6 @@ 
+# This file is generated from configure.ac by Autoconf.  DO NOT EDIT!
+# Local preconfigure fragment for sysdeps/mips
+
 case "$machine" in
 mips*)
 	abiflag=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null | sed -n 's/^#define _MIPS_SIM \(.*\)/\1/p'`
@@ -15,7 +18,7 @@  mips*)
 	elif test "$abiflag" = "_ABI64" ; then
 		machine=mips/mips64/n64
 	else
-		as_fn_error $? "Unable to determine ABI." "$LINENO" 5
+		as_fn_error 1 "Unable to determine ABI." "$LINENO" 5
 	fi
 	# $config_machine is not really needed here but the slash after
 	# $machine is needed by the case statement in
@@ -23,7 +26,7 @@  mips*)
 	machine=$machine/$config_machine
 
 	if test "$abiflag" != "_ABIO32" -a "$mips16flag" = "1"; then
-		as_fn_error $? "MIPS16 is only supported with the o32 ABI." "$LINENO" 5
+		as_fn_error 1 "MIPS16 is only supported with the o32 ABI." "$LINENO" 5
 	fi
 
 	with_fp_cond="defined __mips_hard_float"
Index: glibc/sysdeps/mips/preconfigure.ac
===================================================================
--- /dev/null
+++ glibc/sysdeps/mips/preconfigure.ac
@@ -0,0 +1,34 @@ 
+GLIBC_PROVIDES[]dnl See aclocal.m4 in the top level source directory.
+# Local preconfigure fragment for sysdeps/mips
+
+case "$machine" in
+mips*)
+	abiflag=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null | sed -n 's/^#define _MIPS_SIM \(.*\)/\1/p'`
+	mips16flag=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null | sed -n 's/^#define __mips16 \(.*\)/\1/p'`
+
+	base_machine=mips
+	if test "$abiflag" = "_ABIO32" ; then
+		if test "$mips16flag" = "1" ; then
+			machine=mips/mips32/mips16
+		else
+			machine=mips/mips32
+		fi
+	elif test "$abiflag" = "_ABIN32" ; then
+		machine=mips/mips64/n32
+	elif test "$abiflag" = "_ABI64" ; then
+		machine=mips/mips64/n64
+	else
+		AC_MSG_ERROR([Unable to determine ABI.], [1])
+	fi
+	# $config_machine is not really needed here but the slash after
+	# $machine is needed by the case statement in
+	# sysdeps/unix/sysv/linux/mips/configure.ac.
+	machine=$machine/$config_machine
+
+	if test "$abiflag" != "_ABIO32" -a "$mips16flag" = "1"; then
+		AC_MSG_ERROR([MIPS16 is only supported with the o32 ABI.], [1])
+	fi
+
+	with_fp_cond="defined __mips_hard_float"
+	;;
+esac