Index: gcc/expmed.h
===================================================================
--- gcc/expmed.h	2010-07-07 21:52:27.000000000 +0100
+++ gcc/expmed.h	2010-07-07 22:18:22.000000000 +0100
@@ -22,8 +22,118 @@ Software Foundation; either version 3, o
 #ifndef EXPMED_H
 #define EXPMED_H 1
 
+enum alg_code {
+  alg_unknown,
+  alg_zero,
+  alg_m, alg_shift,
+  alg_add_t_m2,
+  alg_sub_t_m2,
+  alg_add_factor,
+  alg_sub_factor,
+  alg_add_t2_m,
+  alg_sub_t2_m,
+  alg_impossible
+};
+
+/* This structure holds the "cost" of a multiply sequence.  The
+   "cost" field holds the total rtx_cost of every operator in the
+   synthetic multiplication sequence, hence cost(a op b) is defined
+   as rtx_cost(op) + cost(a) + cost(b), where cost(leaf) is zero.
+   The "latency" field holds the minimum possible latency of the
+   synthetic multiply, on a hypothetical infinitely parallel CPU.
+   This is the critical path, or the maximum height, of the expression
+   tree which is the sum of rtx_costs on the most expensive path from
+   any leaf to the root.  Hence latency(a op b) is defined as zero for
+   leaves and rtx_cost(op) + max(latency(a), latency(b)) otherwise.  */
+
+struct mult_cost {
+  short cost;     /* Total rtx_cost of the multiplication sequence.  */
+  short latency;  /* The latency of the multiplication sequence.  */
+};
+
+/* This macro is used to compare a pointer to a mult_cost against an
+   single integer "rtx_cost" value.  This is equivalent to the macro
+   CHEAPER_MULT_COST(X,Z) where Z = {Y,Y}.  */
+#define MULT_COST_LESS(X,Y) ((X)->cost < (Y)	\
+			     || ((X)->cost == (Y) && (X)->latency < (Y)))
+
+/* This macro is used to compare two pointers to mult_costs against
+   each other.  The macro returns true if X is cheaper than Y.
+   Currently, the cheaper of two mult_costs is the one with the
+   lower "cost".  If "cost"s are tied, the lower latency is cheaper.  */
+#define CHEAPER_MULT_COST(X,Y)  ((X)->cost < (Y)->cost		\
+				 || ((X)->cost == (Y)->cost	\
+				     && (X)->latency < (Y)->latency))
+
+/* This structure records a sequence of operations.
+   `ops' is the number of operations recorded.
+   `cost' is their total cost.
+   The operations are stored in `op' and the corresponding
+   logarithms of the integer coefficients in `log'.
+
+   These are the operations:
+   alg_zero		total := 0;
+   alg_m		total := multiplicand;
+   alg_shift		total := total * coeff
+   alg_add_t_m2		total := total + multiplicand * coeff;
+   alg_sub_t_m2		total := total - multiplicand * coeff;
+   alg_add_factor	total := total * coeff + total;
+   alg_sub_factor	total := total * coeff - total;
+   alg_add_t2_m		total := total * coeff + multiplicand;
+   alg_sub_t2_m		total := total * coeff - multiplicand;
+
+   The first operand must be either alg_zero or alg_m.  */
+
+struct algorithm
+{
+  struct mult_cost cost;
+  short ops;
+  /* The size of the OP and LOG fields are not directly related to the
+     word size, but the worst-case algorithms will be if we have few
+     consecutive ones or zeros, i.e., a multiplicand like 10101010101...
+     In that case we will generate shift-by-2, add, shift-by-2, add,...,
+     in total wordsize operations.  */
+  enum alg_code op[MAX_BITS_PER_WORD];
+  char log[MAX_BITS_PER_WORD];
+};
+
+/* The entry for our multiplication cache/hash table.  */
+struct alg_hash_entry {
+  /* The number we are multiplying by.  */
+  unsigned HOST_WIDE_INT t;
+
+  /* The mode in which we are multiplying something by T.  */
+  enum machine_mode mode;
+
+  /* The best multiplication algorithm for t.  */
+  enum alg_code alg;
+
+  /* The cost of multiplication if ALG_CODE is not alg_impossible.
+     Otherwise, the cost within which multiplication by T is
+     impossible.  */
+  struct mult_cost cost;
+
+  /* Optimized for speed? */
+  bool speed;
+};
+
+/* The number of cache/hash entries.  */
+#if HOST_BITS_PER_WIDE_INT == 64
+#define NUM_ALG_HASH_ENTRIES 1031
+#else
+#define NUM_ALG_HASH_ENTRIES 307
+#endif
+
 /* Target-dependent globals.  */
 struct target_expmed {
+  /* Each entry of ALG_HASH caches alg_code for some integer.  This is
+     actually a hash table.  If we have a collision, that the older
+     entry is kicked out.  */
+  struct alg_hash_entry x_alg_hash[NUM_ALG_HASH_ENTRIES];
+
+  /* True if x_alg_hash might already have been used.  */
+  bool x_alg_hash_used_p;
+
   /* Nonzero means divides or modulus operations are relatively cheap for
      powers of two, so don't use branches; emit the operation instead.
      Usually, this will mean that the MD file will emit non-branch
@@ -54,6 +164,10 @@ struct target_expmed {
 #define this_target_expmed (&default_target_expmed)
 #endif
 
+#define alg_hash \
+  (this_target_expmed->x_alg_hash)
+#define alg_hash_used_p \
+  (this_target_expmed->x_alg_hash_used_p)
 #define sdiv_pow2_cheap \
   (this_target_expmed->x_sdiv_pow2_cheap)
 #define smod_pow2_cheap \
Index: gcc/expmed.c
===================================================================
--- gcc/expmed.c	2010-07-07 21:52:27.000000000 +0100
+++ gcc/expmed.c	2010-07-07 22:17:49.000000000 +0100
@@ -259,6 +259,10 @@ init_expmed (void)
 	    }
 	}
     }
+  if (alg_hash_used_p)
+    memset (alg_hash, 0, sizeof (alg_hash));
+  else
+    alg_hash_used_p = true;
   default_rtl_profile ();
 }
 
@@ -2282,113 +2286,6 @@ expand_shift (enum tree_code code, enum
   return temp;
 }
 
-enum alg_code {
-  alg_unknown,
-  alg_zero,
-  alg_m, alg_shift,
-  alg_add_t_m2,
-  alg_sub_t_m2,
-  alg_add_factor,
-  alg_sub_factor,
-  alg_add_t2_m,
-  alg_sub_t2_m,
-  alg_impossible
-};
-
-/* This structure holds the "cost" of a multiply sequence.  The
-   "cost" field holds the total rtx_cost of every operator in the
-   synthetic multiplication sequence, hence cost(a op b) is defined
-   as rtx_cost(op) + cost(a) + cost(b), where cost(leaf) is zero.
-   The "latency" field holds the minimum possible latency of the
-   synthetic multiply, on a hypothetical infinitely parallel CPU.
-   This is the critical path, or the maximum height, of the expression
-   tree which is the sum of rtx_costs on the most expensive path from
-   any leaf to the root.  Hence latency(a op b) is defined as zero for
-   leaves and rtx_cost(op) + max(latency(a), latency(b)) otherwise.  */
-
-struct mult_cost {
-  short cost;     /* Total rtx_cost of the multiplication sequence.  */
-  short latency;  /* The latency of the multiplication sequence.  */
-};
-
-/* This macro is used to compare a pointer to a mult_cost against an
-   single integer "rtx_cost" value.  This is equivalent to the macro
-   CHEAPER_MULT_COST(X,Z) where Z = {Y,Y}.  */
-#define MULT_COST_LESS(X,Y) ((X)->cost < (Y)	\
-			     || ((X)->cost == (Y) && (X)->latency < (Y)))
-
-/* This macro is used to compare two pointers to mult_costs against
-   each other.  The macro returns true if X is cheaper than Y.
-   Currently, the cheaper of two mult_costs is the one with the
-   lower "cost".  If "cost"s are tied, the lower latency is cheaper.  */
-#define CHEAPER_MULT_COST(X,Y)  ((X)->cost < (Y)->cost		\
-				 || ((X)->cost == (Y)->cost	\
-				     && (X)->latency < (Y)->latency))
-
-/* This structure records a sequence of operations.
-   `ops' is the number of operations recorded.
-   `cost' is their total cost.
-   The operations are stored in `op' and the corresponding
-   logarithms of the integer coefficients in `log'.
-
-   These are the operations:
-   alg_zero		total := 0;
-   alg_m		total := multiplicand;
-   alg_shift		total := total * coeff
-   alg_add_t_m2		total := total + multiplicand * coeff;
-   alg_sub_t_m2		total := total - multiplicand * coeff;
-   alg_add_factor	total := total * coeff + total;
-   alg_sub_factor	total := total * coeff - total;
-   alg_add_t2_m		total := total * coeff + multiplicand;
-   alg_sub_t2_m		total := total * coeff - multiplicand;
-
-   The first operand must be either alg_zero or alg_m.  */
-
-struct algorithm
-{
-  struct mult_cost cost;
-  short ops;
-  /* The size of the OP and LOG fields are not directly related to the
-     word size, but the worst-case algorithms will be if we have few
-     consecutive ones or zeros, i.e., a multiplicand like 10101010101...
-     In that case we will generate shift-by-2, add, shift-by-2, add,...,
-     in total wordsize operations.  */
-  enum alg_code op[MAX_BITS_PER_WORD];
-  char log[MAX_BITS_PER_WORD];
-};
-
-/* The entry for our multiplication cache/hash table.  */
-struct alg_hash_entry {
-  /* The number we are multiplying by.  */
-  unsigned HOST_WIDE_INT t;
-
-  /* The mode in which we are multiplying something by T.  */
-  enum machine_mode mode;
-
-  /* The best multiplication algorithm for t.  */
-  enum alg_code alg;
-
-  /* The cost of multiplication if ALG_CODE is not alg_impossible.
-     Otherwise, the cost within which multiplication by T is
-     impossible.  */
-  struct mult_cost cost;
-
-  /* OPtimized for speed? */
-  bool speed;
-};
-
-/* The number of cache/hash entries.  */
-#if HOST_BITS_PER_WIDE_INT == 64
-#define NUM_ALG_HASH_ENTRIES 1031
-#else
-#define NUM_ALG_HASH_ENTRIES 307
-#endif
-
-/* Each entry of ALG_HASH caches alg_code for some integer.  This is
-   actually a hash table.  If we have a collision, that the older
-   entry is kicked out.  */
-static struct alg_hash_entry alg_hash[NUM_ALG_HASH_ENTRIES];
-
 /* Indicates the type of fixup needed after a constant multiplication.
    BASIC_VARIANT means no fixup is needed, NEGATE_VARIANT means that
    the result should be negated, and ADD_VARIANT means that the
