diff mbox

[MIPS] DSP ALU scheduling

Message ID 502D9538.5060803@codesourcery.com
State New
Headers show

Commit Message

Sandra Loosemore Aug. 17, 2012, 12:50 a.m. UTC 
On 08/16/2012 01:27 PM, Richard Sandiford wrote:
> Sandra Loosemore<sandra@codesourcery.com>  writes:
>> @@ -569,7 +569,7 @@
>>   		   UNSPEC_DPAU_H_QBL))]
>>     "ISA_HAS_DSP&&  !TARGET_64BIT"
>>     "dpau.h.qbl\t%q0,%2,%3"
>> -  [(set_attr "type"	"imadd")
>> +  [(set_attr "type"	"dspmac")
>>      (set_attr "mode"	"SI")])
>>
>>   (define_insn "mips_dpau_h_qbr"
>> [etc]
>
> I think all these want (set_attr "accum_in" "1") too.

Eeek, you are right.  I have checked in the obvious patch to correct this.

-Sandra

2012-08-16  Sandra Loosemore  <sandra@codesourcery.com>

	gcc/
	* config/mips/mips-dsp.md (mips_dpau_h_qbl, mips_dpau_h_qbr)
	(mips_dpsu_h_qbl, mips_dpsu_h_qbr, mips_dpaq_s_w_ph)
	(mips_dpsq_s_w_ph, mips_mulsaq_s_w_ph, mips_dpaq_sa_l_w)
	(mips_dpsq_sa_l_w, mips_maq_s_w_phl, mips_maq_s_w_phr)
	(mips_maq_sa_w_phl, mips_maq_sa_w_phr): Add accum_in attribute.
diff mbox

Patch

Index: gcc/config/mips/mips-dsp.md
===================================================================
--- gcc/config/mips/mips-dsp.md	(revision 190453)
+++ gcc/config/mips/mips-dsp.md	(working copy)
@@ -570,6 +570,7 @@ 
   "ISA_HAS_DSP && !TARGET_64BIT"
   "dpau.h.qbl\t%q0,%2,%3"
   [(set_attr "type"	"dspmac")
+   (set_attr "accum_in" "1")
    (set_attr "mode"	"SI")])
 
 (define_insn "mips_dpau_h_qbr"
@@ -581,6 +582,7 @@ 
   "ISA_HAS_DSP && !TARGET_64BIT"
   "dpau.h.qbr\t%q0,%2,%3"
   [(set_attr "type"	"dspmac")
+   (set_attr "accum_in" "1")
    (set_attr "mode"	"SI")])
 
 ;; DPSU*
@@ -593,6 +595,7 @@ 
   "ISA_HAS_DSP && !TARGET_64BIT"
   "dpsu.h.qbl\t%q0,%2,%3"
   [(set_attr "type"	"dspmac")
+   (set_attr "accum_in" "1")
    (set_attr "mode"	"SI")])
 
 (define_insn "mips_dpsu_h_qbr"
@@ -604,6 +607,7 @@ 
   "ISA_HAS_DSP && !TARGET_64BIT"
   "dpsu.h.qbr\t%q0,%2,%3"
   [(set_attr "type"	"dspmac")
+   (set_attr "accum_in" "1")
    (set_attr "mode"	"SI")])
 
 ;; DPAQ*
@@ -620,6 +624,7 @@ 
   "ISA_HAS_DSP && !TARGET_64BIT"
   "dpaq_s.w.ph\t%q0,%2,%3"
   [(set_attr "type"	"dspmac")
+   (set_attr "accum_in" "1")
    (set_attr "mode"	"SI")])
 
 ;; DPSQ*
@@ -636,6 +641,7 @@ 
   "ISA_HAS_DSP && !TARGET_64BIT"
   "dpsq_s.w.ph\t%q0,%2,%3"
   [(set_attr "type"	"dspmac")
+   (set_attr "accum_in" "1")
    (set_attr "mode"	"SI")])
 
 ;; MULSAQ*
@@ -652,6 +658,7 @@ 
   "ISA_HAS_DSP && !TARGET_64BIT"
   "mulsaq_s.w.ph\t%q0,%2,%3"
   [(set_attr "type"	"dspmac")
+   (set_attr "accum_in" "1")
    (set_attr "mode"	"SI")])
 
 ;; DPAQ*
@@ -668,6 +675,7 @@ 
   "ISA_HAS_DSP && !TARGET_64BIT"
   "dpaq_sa.l.w\t%q0,%2,%3"
   [(set_attr "type"	"dspmacsat")
+   (set_attr "accum_in" "1")
    (set_attr "mode"	"SI")])
 
 ;; DPSQ*
@@ -684,6 +692,7 @@ 
   "ISA_HAS_DSP && !TARGET_64BIT"
   "dpsq_sa.l.w\t%q0,%2,%3"
   [(set_attr "type"	"dspmacsat")
+   (set_attr "accum_in" "1")
    (set_attr "mode"	"SI")])
 
 ;; MAQ*
@@ -700,6 +709,7 @@ 
   "ISA_HAS_DSP && !TARGET_64BIT"
   "maq_s.w.phl\t%q0,%2,%3"
   [(set_attr "type"	"dspmac")
+   (set_attr "accum_in" "1")
    (set_attr "mode"	"SI")])
 
 (define_insn "mips_maq_s_w_phr"
@@ -715,6 +725,7 @@ 
   "ISA_HAS_DSP && !TARGET_64BIT"
   "maq_s.w.phr\t%q0,%2,%3"
   [(set_attr "type"	"dspmac")
+   (set_attr "accum_in" "1")
    (set_attr "mode"	"SI")])
 
 ;; MAQ_SA*
@@ -731,6 +742,7 @@ 
   "ISA_HAS_DSP && !TARGET_64BIT"
   "maq_sa.w.phl\t%q0,%2,%3"
   [(set_attr "type"	"dspmacsat")
+   (set_attr "accum_in" "1")
    (set_attr "mode"	"SI")])
 
 (define_insn "mips_maq_sa_w_phr"
@@ -746,6 +758,7 @@ 
   "ISA_HAS_DSP && !TARGET_64BIT"
   "maq_sa.w.phr\t%q0,%2,%3"
   [(set_attr "type"	"dspmacsat")
+   (set_attr "accum_in" "1")
    (set_attr "mode"	"SI")])
 
 ;; Table 2-4. MIPS DSP ASE Instructions: General Bit/Manipulation