diff mbox

Emit more REG_EQUIV notes for function args (PR42235)

Message ID 4C3F41BA.7070905@codesourcery.com
State New
Headers show

Commit Message

Bernd Schmidt July 15, 2010, 5:13 p.m. UTC
On 07/15/2010 12:28 AM, Jeff Law wrote:
> On 07/14/10 15:30, Bernd Schmidt wrote:
>> If necessary I can try to test for a single insn with single_set and
>> push it to the sequence otherwise.
>>    
> For the mn103, the conversions were single insns...
> 
> Ultimately,  I think you have to peek at the insn(s) and see what
> registers they set/clobber.

How's this?  Bootstrapped and tested on i686-linux.  ARM tests in progress.


Bernd
PR target/42235
	* function.c (record_hard_reg_sets): New static function.
	(assign_parm_setup_reg): If an optab for extending exists and the
	generated code clobbbers no hard regs, emit the insn directly and
	create a REG_EQUIV note.

Comments

Jeff Law July 15, 2010, 9:26 p.m. UTC | #1
On 07/15/10 11:13, Bernd Schmidt wrote:
> On 07/15/2010 12:28 AM, Jeff Law wrote:
>    
>> On 07/14/10 15:30, Bernd Schmidt wrote:
>>      
>>> If necessary I can try to test for a single insn with single_set and
>>> push it to the sequence otherwise.
>>>
>>>        
>> For the mn103, the conversions were single insns...
>>
>> Ultimately,  I think you have to peek at the insn(s) and see what
>> registers they set/clobber.
>>      
> How's this?  Bootstrapped and tested on i686-linux.  ARM tests in progress.
>    
OK.
Jeff
diff mbox

Patch

Index: gcc/function.c
===================================================================
--- gcc.orig/function.c
+++ gcc/function.c
@@ -2854,6 +2854,21 @@  assign_parm_setup_block (struct assign_p
   SET_DECL_RTL (parm, stack_parm);
 }
 
+/* A subroutine of assign_parm_setup_reg, called through note_stores.
+   This collects sets and clobbers of hard registers in a HARD_REG_SET,
+   which is pointed to by DATA.  */
+static void
+record_hard_reg_sets (rtx x, const_rtx pat ATTRIBUTE_UNUSED, void *data)
+{
+  HARD_REG_SET *pset = (HARD_REG_SET *)data;
+  if (REG_P (x) && REGNO (x) < FIRST_PSEUDO_REGISTER)
+    {
+      int nregs = hard_regno_nregs[REGNO (x)][GET_MODE (x)];
+      while (nregs-- > 0)
+	SET_HARD_REG_BIT (*pset, REGNO (x) + nregs);
+    }
+}
+
 /* A subroutine of assign_parms.  Allocate a pseudo to hold the current
    parameter.  Get it there.  Perform all ABI specified conversions.  */
 
@@ -2861,10 +2876,12 @@  static void
 assign_parm_setup_reg (struct assign_parm_data_all *all, tree parm,
 		       struct assign_parm_data_one *data)
 {
-  rtx parmreg;
+  rtx parmreg, validated_mem;
+  rtx equiv_stack_parm;
   enum machine_mode promoted_nominal_mode;
   int unsignedp = TYPE_UNSIGNED (TREE_TYPE (parm));
   bool did_conversion = false;
+  bool need_conversion, moved;
 
   /* Store the parm in a pseudoregister during the function, but we may
      need to do it in a wider mode.  Using 2 here makes the result
@@ -2893,11 +2910,16 @@  assign_parm_setup_reg (struct assign_par
 
   /* Copy the value into the register, thus bridging between
      assign_parm_find_data_types and expand_expr_real_1.  */
-  if (data->nominal_mode != data->passed_mode
-      || promoted_nominal_mode != data->promoted_mode)
-    {
-      int save_tree_used;
 
+  equiv_stack_parm = data->stack_parm;
+  validated_mem = validize_mem (data->entry_parm);
+
+  need_conversion = (data->nominal_mode != data->passed_mode
+		     || promoted_nominal_mode != data->promoted_mode);
+  moved = false;
+
+  if (need_conversion)
+    {
       /* ENTRY_PARM has been converted to PROMOTED_MODE, its
 	 mode, by the caller.  We now have to convert it to
 	 NOMINAL_MODE, if different.  However, PARMREG may be in
@@ -2913,13 +2935,70 @@  assign_parm_setup_reg (struct assign_par
 
 	 In addition, the conversion may involve a call, which could
 	 clobber parameters which haven't been copied to pseudo
-	 registers yet.  Therefore, we must first copy the parm to
-	 a pseudo reg here, and save the conversion until after all
+	 registers yet.
+
+	 First, we try to emit an insn which performs the necessary
+	 conversion.  We verify that this insn does not clobber any
+	 hard registers.  */
+
+      enum insn_code icode;
+      rtx op0, op1;
+
+      icode = can_extend_p (promoted_nominal_mode, data->passed_mode,
+			    unsignedp);
+
+      op0 = parmreg;
+      op1 = validated_mem;
+      if (icode != CODE_FOR_nothing
+	  && insn_data[icode].operand[0].predicate (op0, promoted_nominal_mode)
+	  && insn_data[icode].operand[1].predicate (op1, data->passed_mode))
+	{
+	  enum rtx_code code = unsignedp ? ZERO_EXTEND : SIGN_EXTEND;
+	  rtx insn, insns;
+	  HARD_REG_SET hardregs;
+
+	  start_sequence ();
+	  insn = gen_extend_insn (op0, op1, promoted_nominal_mode,
+				  data->passed_mode, unsignedp);
+	  emit_insn (insn);
+	  insns = get_insns ();
+
+	  moved = true;
+	  CLEAR_HARD_REG_SET (hardregs);
+	  for (insn = insns; insn && moved; insn = NEXT_INSN (insn))
+	    {
+	      if (INSN_P (insn))
+		note_stores (PATTERN (insn), record_hard_reg_sets,
+			     &hardregs);
+	      if (!hard_reg_set_empty_p (hardregs))
+		moved = false;
+	    }
+
+	  end_sequence ();
+
+	  if (moved)
+	    {
+	      emit_insn (insns);
+	      equiv_stack_parm = gen_rtx_fmt_e (code, GET_MODE (parmreg),
+						equiv_stack_parm);
+	    }
+	}
+    }
+
+  if (moved)
+    /* Nothing to do.  */
+    ;
+  else if (need_conversion)
+    {
+      /* We did not have an insn to convert directly, or the sequence
+	 generated appeared unsafe.  We must first copy the parm to a
+	 pseudo reg, and save the conversion until after all
 	 parameters have been moved.  */
 
+      int save_tree_used;
       rtx tempreg = gen_reg_rtx (GET_MODE (data->entry_parm));
 
-      emit_move_insn (tempreg, validize_mem (data->entry_parm));
+      emit_move_insn (tempreg, validated_mem);
 
       push_to_sequence2 (all->first_conversion_insn, all->last_conversion_insn);
       tempreg = convert_to_mode (data->nominal_mode, tempreg, unsignedp);
@@ -2949,7 +3028,7 @@  assign_parm_setup_reg (struct assign_par
       did_conversion = true;
     }
   else
-    emit_move_insn (parmreg, validize_mem (data->entry_parm));
+    emit_move_insn (parmreg, validated_mem);
 
   /* If we were passed a pointer but the actual value can safely live
      in a register, put it in one.  */
@@ -3034,7 +3113,7 @@  assign_parm_setup_reg (struct assign_par
 	}
       else if ((set = single_set (linsn)) != 0
 	       && SET_DEST (set) == parmreg)
-	set_unique_reg_note (linsn, REG_EQUIV, data->stack_parm);
+	set_unique_reg_note (linsn, REG_EQUIV, equiv_stack_parm);
     }
 
   /* For pointer data type, suggest pointer register.  */