Index: gcc/c-family/c.opt
===================================================================
--- gcc/c-family/c.opt	(revision 201084)
+++ gcc/c-family/c.opt	(arbetskopia)
@@ -1250,8 +1250,7 @@
 
 fext-numeric-literals
 C++ ObjC++ 
-Interpret imaginary, fixed-point, or other gnu number suffix as the corresponding
-number literal rather than a user-defined number literal.
+Interpret imaginary, fixed-point, or other gnu number suffix as the corresponding number literal rather than a user-defined number literal.
 
 idirafter
 C ObjC C++ ObjC++ Joined Separate MissingArgError(missing path after %qs)
@@ -1369,13 +1368,11 @@
 
 std=gnu++98
 C++ ObjC++
-Conform to the ISO 1998 C++ standard revised by the 2003 technical
-corrigendum with GNU extensions
+Conform to the ISO 1998 C++ standard revised by the 2003 technical corrigendum with GNU extensions
 
 std=gnu++03
 C++ ObjC++ Alias(std=gnu++98)
-Conform to the ISO 1998 C++ standard revised by the 2003 technical
-corrigendum with GNU extensions
+Conform to the ISO 1998 C++ standard revised by the 2003 technical corrigendum with GNU extensions
 
 std=gnu++11
 C++ ObjC++
Index: gcc/common.opt
===================================================================
--- gcc/common.opt	(revision 201084)
+++ gcc/common.opt	(arbetskopia)
@@ -1213,13 +1213,11 @@
 
 fgcse-las
 Common Report Var(flag_gcse_las) Init(0) Optimization
-Perform redundant load after store elimination in global common subexpression
-elimination
+Perform redundant load after store elimination in global common subexpression elimination
 
 fgcse-after-reload
 Common Report Var(flag_gcse_after_reload) Optimization
-Perform global common subexpression elimination after register allocation
-has finished
+Perform global common subexpression elimination after register allocation has finished
 
 ; This option is not documented yet as its semantics will change.
 fgraphite
@@ -1232,8 +1230,7 @@
 
 fhoist-adjacent-loads
 Common Report Var(flag_hoist_adjacent_loads) Optimization
-Enable hoisting adjacent loads to encourage generating conditional move
-instructions
+Enable hoisting adjacent loads to encourage generating conditional move instructions
 
 floop-parallelize-all
 Common Report Var(flag_loop_parallelize_all) Optimization
@@ -1427,13 +1424,11 @@
 
 fira-hoist-pressure
 Common Report Var(flag_ira_hoist_pressure) Init(1) Optimization
-Use IRA based register pressure calculation
-in RTL hoist optimizations.
+Use IRA based register pressure calculation in RTL hoist optimizations.
 
 fira-loop-pressure
 Common Report Var(flag_ira_loop_pressure)
-Use IRA based register pressure calculation
-in RTL loop optimizations.
+Use IRA based register pressure calculation in RTL loop optimizations.
 
 fira-share-save-slots
 Common Report Var(flag_ira_share_save_slots) Init(1)
@@ -1669,8 +1664,7 @@
 
 fprofile-dir=
 Common Joined RejectNegative Var(profile_data_prefix)
-Set the top-level directory for storing the profile data.
-The default is 'pwd'.
+Set the top-level directory for storing the profile data.  The default is 'pwd'.
 
 fprofile-correction
 Common Report Var(flag_profile_correction)
@@ -1884,8 +1878,7 @@
 
 fshrink-wrap
 Common Report Var(flag_shrink_wrap) Optimization
-Emit function prologues only before parts of the function that need it,
-rather than at the top of the function.
+Emit function prologues only before parts of the function that need it, rather than at the top of the function.
 
 fsignaling-nans
 Common Report Var(flag_signaling_nans) Optimization SetByCombined
@@ -2193,8 +2186,7 @@
 
 fassociative-math
 Common Report Var(flag_associative_math) SetByCombined
-Allow optimization for floating-point arithmetic which may change the
-result of the operation due to rounding.
+Allow optimization for floating-point arithmetic which may change the result of the operation due to rounding.
 
 freciprocal-math
 Common Report Var(flag_reciprocal_math) SetByCombined
Index: gcc/config/arm/arm.opt
===================================================================
--- gcc/config/arm/arm.opt	(revision 201084)
+++ gcc/config/arm/arm.opt	(arbetskopia)
@@ -245,8 +245,7 @@
 
 mfix-cortex-m3-ldrd
 Target Report Var(fix_cm3_ldrd) Init(2)
-Avoid overlapping destination and address registers on LDRD instructions
-that may trigger Cortex-M3 errata.
+Avoid overlapping destination and address registers on LDRD instructions that may trigger Cortex-M3 errata.
 
 munaligned-access
 Target Report Var(unaligned_access) Init(2)
Index: gcc/config/bfin/bfin.opt
===================================================================
--- gcc/config/bfin/bfin.opt	(revision 201084)
+++ gcc/config/bfin/bfin.opt	(arbetskopia)
@@ -53,8 +53,7 @@
 
 mcsync-anomaly
 Target Report Var(bfin_csync_anomaly) Init(-1)
-Work around a hardware anomaly by adding a number of NOPs before a
-CSYNC or SSYNC instruction.
+Work around a hardware anomaly by adding a number of NOPs before a CSYNC or SSYNC instruction.
 
 mspecld-anomaly
 Target Report Var(bfin_specld_anomaly) Init(-1)
@@ -66,8 +65,7 @@
 
 mleaf-id-shared-library
 Target Report Mask(LEAF_ID_SHARED_LIBRARY)
-Generate code that won't be linked against any other ID shared libraries,
-but may be used as a shared library.
+Generate code that won't be linked against any other ID shared libraries, but may be used as a shared library.
 
 mshared-library-id=
 Target RejectNegative Joined UInteger Var(bfin_library_id)
Index: gcc/config/i386/i386.opt
===================================================================
--- gcc/config/i386/i386.opt	(revision 201084)
+++ gcc/config/i386/i386.opt	(arbetskopia)
@@ -416,13 +416,11 @@
 
 mvzeroupper
 Target Report Mask(VZEROUPPER) Save
-Generate vzeroupper instruction before a transfer of control flow out of
-the function.
+Generate vzeroupper instruction before a transfer of control flow out of the function.
 
 mdispatch-scheduler
 Target RejectNegative Var(flag_dispatch_scheduler)
-Do dispatch scheduling if processor is bdver1 or bdver2 or bdver3 and Haifa scheduling
-is selected.
+Do dispatch scheduling if processor is bdver1 or bdver2 or bdver3 and Haifa scheduling is selected.
 
 mprefer-avx128
 Target Report Mask(PREFER_AVX128) SAVE
Index: gcc/config/rs6000/sysv4.opt
===================================================================
--- gcc/config/rs6000/sysv4.opt	(revision 201084)
+++ gcc/config/rs6000/sysv4.opt	(arbetskopia)
@@ -49,8 +49,7 @@
 
 mstrict-align
 Target Report Mask(STRICT_ALIGN) Var(rs6000_isa_flags)
-Align to the base type of the bit-field
-Don't assume that unaligned accesses are handled by the system
+Align to the base type of the bit-field. Don't assume that unaligned accesses are handled by the system
 
 mrelocatable
 Target Report Mask(RELOCATABLE) Var(rs6000_isa_flags)
Index: gcc/config/s390/s390.opt
===================================================================
--- gcc/config/s390/s390.opt	(revision 201084)
+++ gcc/config/s390/s390.opt	(arbetskopia)
@@ -150,9 +150,7 @@
 
 mbranch-cost=
 Target Report Joined RejectNegative UInteger Var(s390_branch_cost) Init(1)
-Set the branch costs for conditional branch instructions.  Reasonable
-values are small, non-negative integers.  The default branch cost is
-1.
+Set the branch costs for conditional branch instructions.  Reasonable values are small, non-negative integers.  The default branch cost is 1.
 
 mlra
 Target Report Var(s390_lra_flag) Init(1) Save
Index: gcc/config/sparc/sparc.opt
===================================================================
--- gcc/config/sparc/sparc.opt	(revision 201084)
+++ gcc/config/sparc/sparc.opt	(arbetskopia)
@@ -198,8 +198,7 @@
 
 mfix-at697f
 Target Report RejectNegative Var(sparc_fix_at697f)
-Enable workaround for single erratum of AT697F processor
-(corresponding to erratum #13 of AT697E processor)
+Enable workaround for single erratum of AT697F processor (corresponding to erratum #13 of AT697E processor)
 
 mfix-ut699
 Target Report RejectNegative Var(sparc_fix_ut699)
Index: gcc/config/tilepro/tilepro.opt
===================================================================
--- gcc/config/tilepro/tilepro.opt	(revision 201084)
+++ gcc/config/tilepro/tilepro.opt	(arbetskopia)
@@ -20,8 +20,7 @@
 
 m32
 Target Report RejectNegative
-Compile with 32 bit longs and pointers, which is the only supported
-behavior and thus the flag is ignored.
+Compile with 32 bit longs and pointers, which is the only supported behavior and thus the flag is ignored.
 
 mcpu=
 Target RejectNegative Joined Enum(tilepro_cpu) Var(tilepro_cpu) Init(0)
