@@ -2579,6 +2579,7 @@ or1k*-*-*)
case ${or1k_multilib} in
mcmov | msext | msfimm | \
mror | mrori | \
+ mhard-float | mdouble-float | munordered-float | msoft-float | \
mhard-div | mhard-mul | \
msoft-div | msoft-mul )
TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${or1k_multilib}"
@@ -24,6 +24,7 @@
; We use:
; c - sibcall registers
+; d - double pair base registers (excludes r0, r30 and r31 which overflow)
; I - constant signed 16-bit
; K - constant unsigned 16-bit
; M - constant signed 16-bit shifted left 16-bits (l.movhi)
@@ -32,6 +33,9 @@
(define_register_constraint "c" "SIBCALL_REGS"
"Registers which can hold a sibling call address")
+(define_register_constraint "d" "DOUBLE_REGS"
+ "Registers which can be used for double reg pairs.")
+
;; Immediates
(define_constraint "I"
"A signed 16-bit immediate in the range -32768 to 32767."
@@ -1226,6 +1226,17 @@ or1k_print_operand (FILE *file, rtx x, int code)
output_operand_lossage ("invalid %%H value");
break;
+ case 'd':
+ if (REG_P (x))
+ if (GET_MODE (x) == DFmode || GET_MODE (x) == DImode)
+ fprintf (file, "%s,%s", reg_names[REGNO (operand)],
+ reg_names[REGNO (operand) + 1]);
+ else
+ fprintf (file, "%s", reg_names[REGNO (operand)]);
+ else
+ output_operand_lossage ("invalid %%d value");
+ break;
+
case 'h':
print_reloc (file, x, 0, RKIND_HI);
break;
@@ -1435,21 +1446,42 @@ void
or1k_expand_compare (rtx *operands)
{
rtx sr_f = gen_rtx_REG (BImode, SR_F_REGNUM);
+ rtx_code cmp_code = GET_CODE (operands[0]);
+ bool flag_check_ne = true;
/* The RTL may receive an immediate in argument 1 of the compare, this is not
supported unless we have l.sf*i instructions, force them into registers. */
if (!TARGET_SFIMM)
XEXP (operands[0], 1) = force_reg (SImode, XEXP (operands[0], 1));
+ /* Normalize comparison operators to ones OpenRISC support. */
+ switch (cmp_code)
+ {
+ case LTGT:
+ cmp_code = UNEQ;
+ flag_check_ne = false;
+ break;
+
+ case ORDERED:
+ cmp_code = UNORDERED;
+ flag_check_ne = false;
+ break;
+
+ default:
+ break;
+ }
+
/* Emit the given comparison into the Flag bit. */
PUT_MODE (operands[0], BImode);
+ PUT_CODE (operands[0], cmp_code);
emit_insn (gen_rtx_SET (sr_f, operands[0]));
/* Adjust the operands for use in the caller. */
- operands[0] = gen_rtx_NE (VOIDmode, sr_f, const0_rtx);
+ operands[0] = flag_check_ne ? gen_rtx_NE (VOIDmode, sr_f, const0_rtx)
+ : gen_rtx_EQ (VOIDmode, sr_f, const0_rtx);
operands[1] = sr_f;
operands[2] = const0_rtx;
-}
+ }
/* Expand the patterns "call", "sibcall", "call_value" and "sibcall_value".
Expands a function call where argument RETVAL is an optional RTX providing
@@ -189,6 +189,7 @@ enum reg_class
{
NO_REGS,
SIBCALL_REGS,
+ DOUBLE_REGS,
GENERAL_REGS,
FLAG_REGS,
ALL_REGS,
@@ -200,6 +201,7 @@ enum reg_class
#define REG_CLASS_NAMES { \
"NO_REGS", \
"SIBCALL_REGS", \
+ "DOUBLE_REGS", \
"GENERAL_REGS", \
"FLAG_REGS", \
"ALL_REGS" }
@@ -212,6 +214,7 @@ enum reg_class
#define REG_CLASS_CONTENTS \
{ { 0x00000000, 0x00000000 }, \
{ SIBCALL_REGS_MASK, 0 }, \
+ { 0x7ffffefe, 0x00000000 }, \
{ 0xffffffff, 0x00000003 }, \
{ 0x00000000, 0x00000004 }, \
{ 0xffffffff, 0x00000007 } \
@@ -60,7 +60,7 @@
(define_attr "length" "" (const_int 4))
(define_attr "type"
- "alu,st,ld,control,multi"
+ "alu,st,ld,control,multi,fpu"
(const_string "alu"))
(define_attr "insn_support" "class1,sext,sfimm,shftimm,ror,rori" (const_string "class1"))
@@ -97,6 +97,10 @@
(define_insn_reservation "control" 1
(eq_attr "type" "control")
"cpu")
+(define_insn_reservation "fpu" 2
+ (eq_attr "type" "fpu")
+ "cpu")
+
; Define delay slots for any branch
(define_delay (eq_attr "type" "control")
@@ -159,6 +163,47 @@
""
"l.sub\t%0, %r1, %2")
+;; -------------------------------------------------------------------------
+;; Floating Point Arithmetic instructions
+;; -------------------------------------------------------------------------
+
+;; Mode iterator for single/double float
+(define_mode_iterator F [(SF "TARGET_HARD_FLOAT")
+ (DF "TARGET_DOUBLE_FLOAT")])
+(define_mode_attr f [(SF "s") (DF "d")])
+(define_mode_attr fr [(SF "r") (DF "d")])
+(define_mode_attr fi [(SF "si") (DF "di")])
+(define_mode_attr FI [(SF "SI") (DF "DI")])
+
+;; Basic arithmetic instructions
+(define_code_iterator FOP [plus minus mult div])
+(define_code_attr fop [(plus "add") (minus "sub") (mult "mul") (div "div")])
+
+(define_insn "<fop><F:mode>3"
+ [(set (match_operand:F 0 "register_operand" "=<fr>")
+ (FOP:F (match_operand:F 1 "register_operand" "<fr>")
+ (match_operand:F 2 "register_operand" "<fr>")))]
+ "TARGET_HARD_FLOAT"
+ "lf.<fop>.<f>\t%d0, %d1, %d2"
+ [(set_attr "type" "fpu")])
+
+;; Basic float<->int conversion
+(define_insn "float<fi><F:mode>2"
+ [(set (match_operand:F 0 "register_operand" "=<fr>")
+ (float:F
+ (match_operand:<FI> 1 "register_operand" "<fr>")))]
+ "TARGET_HARD_FLOAT"
+ "lf.itof.<f>\t%d0, %d1"
+ [(set_attr "type" "fpu")])
+
+(define_insn "fix_trunc<F:mode><fi>2"
+ [(set (match_operand:<FI> 0 "register_operand" "=<fr>")
+ (fix:<FI>
+ (match_operand:F 1 "register_operand" "<fr>")))]
+ "TARGET_HARD_FLOAT"
+ "lf.ftoi.<f>\t%d0, %d1"
+ [(set_attr "type" "fpu")])
+
;; -------------------------------------------------------------------------
;; Logical operators
;; -------------------------------------------------------------------------
@@ -380,7 +425,7 @@
(define_code_iterator intcmpcc [ne eq lt ltu gt gtu ge le geu leu])
(define_code_attr insn [(ne "ne") (eq "eq") (lt "lts") (ltu "ltu")
(gt "gts") (gtu "gtu") (ge "ges") (le "les")
- (geu "geu") (leu "leu") ])
+ (geu "geu") (leu "leu")])
(define_insn "*sf_insn"
[(set (reg:BI SR_F_REGNUM)
@@ -392,6 +437,36 @@
l.sf<insn>i\t%r0, %1"
[(set_attr "insn_support" "*,sfimm")])
+;; Support FP comparisons too
+
+;; The OpenRISC FPU supports these comparisons:
+;;
+;; lf.sfeq.{d,s} - equality, r r, double or single precision
+;; lf.sfge.{d,s} - greater than or equal, r r, double or single precision
+;; lf.sfgt.{d,s} - greater than, r r, double or single precision
+;; lf.sfle.{d,s} - less than or equal, r r, double or single precision
+;; lf.sflt.{d,s} - less than, r r, double or single precision
+;; lf.sfne.{d,s} - not equal, r r, double or single precision
+;;
+;; Double precision is only supported on some hardware. Only register/register
+;; comparisons are supported. All comparisons are signed.
+
+(define_code_iterator fpcmpcc [ne eq lt gt ge le uneq unle unlt ungt unge
+ unordered])
+(define_code_attr fpcmpinsn [(ne "ne") (eq "eq") (lt "lt") (gt "gt") (ge "ge")
+ (le "le") (uneq "ueq") (unle "ule") (unlt "ult")
+ (ungt "ugt") (unge "uge") (unordered "un")])
+
+
+(define_insn "*sf_fp_insn"
+ [(set (reg:BI SR_F_REGNUM)
+ (fpcmpcc:BI (match_operand:F 0 "register_operand" "<fr>")
+ (match_operand:F 1 "register_operand" "<fr>")))]
+ "TARGET_HARD_FLOAT"
+ "lf.sf<fpcmpinsn>.<f>\t%d0, %d1"
+ [(set_attr "type" "fpu")])
+
+
;; -------------------------------------------------------------------------
;; Conditional Store instructions
;; -------------------------------------------------------------------------
@@ -412,6 +487,23 @@
DONE;
})
+;; Support FP cstores too
+(define_expand "cstore<F:mode>4"
+ [(set (match_operand:SI 0 "register_operand" "")
+ (if_then_else:F
+ (match_operator 1 "fp_comparison_operator"
+ [(match_operand:F 2 "register_operand" "")
+ (match_operand:F 3 "register_operand" "")])
+ (match_dup 0)
+ (const_int 0)))]
+ "TARGET_HARD_FLOAT"
+{
+ or1k_expand_compare (operands + 1);
+ PUT_MODE (operands[1], SImode);
+ emit_insn (gen_rtx_SET (operands[0], operands[1]));
+ DONE;
+})
+
;; Being able to "copy" SR_F to a general register is helpful for
;; the atomic insns, wherein the usual usage is to test the success
;; of the compare-and-swap. Representing the operation in this way,
@@ -505,6 +597,21 @@
or1k_expand_compare (operands);
})
+;; Support FP branching
+
+(define_expand "cbranch<F:mode>4"
+ [(set (pc)
+ (if_then_else
+ (match_operator 0 "fp_comparison_operator"
+ [(match_operand:F 1 "register_operand" "")
+ (match_operand:F 2 "register_operand" "")])
+ (label_ref (match_operand 3 "" ""))
+ (pc)))]
+ "TARGET_HARD_FLOAT"
+{
+ or1k_expand_compare (operands);
+})
+
(define_insn "*cbranch"
[(set (pc)
(if_then_else
@@ -41,6 +41,28 @@ Target RejectNegative Mask(SOFT_MUL).
Enable generation of binaries which use functions from libgcc to perform
multiply operations. The default is -mhard-mul.
+msoft-float
+Target RejectNegative InverseMask(HARD_FLOAT)
+Enable generation of binaries which use functions from libgcc to perform
+floating point operations. This is the default; use -mhard-float to override.
+
+mhard-float
+Target RejectNegative Mask(HARD_FLOAT)
+Enable generation of hardware floating point instructions. The default is
+-msoft-float.
+
+mdouble-float
+Target Mask(DOUBLE_FLOAT)
+When -mhard-float is selected, enables generation of double-precision floating
+point instructions. By default functions from libgcc are used to perform
+double-precision floating point operations.
+
+munordered-float
+Target RejectNegative Mask(FP_UNORDERED)
+When -mhard-float is selected, enables generation of unordered floating point
+compare and set flag (lf.sfun*) instructions. By default functions from libgcc
+are used to perform unordered floating point compare and set flag operations.
+
mcmov
Target RejectNegative Mask(CMOV)
Enable generation of conditional move (l.cmov) instructions. By default the
@@ -83,6 +83,11 @@
(define_predicate "equality_comparison_operator"
(match_code "ne,eq"))
+(define_predicate "fp_comparison_operator"
+ (if_then_else (match_test "TARGET_FP_UNORDERED")
+ (match_operand 0 "comparison_operator")
+ (match_operand 0 "ordered_comparison_operator")))
+
;; Borrowed from rs6000
; Return true if the operand is in volatile memory. Note that during the
;; RTL generation phase, memory_operand does not return TRUE for volatile
@@ -1033,6 +1033,7 @@ Objective-C and Objective-C++ Dialects}.
@emph{OpenRISC Options}
@gccoptlist{-mboard=@var{name} -mnewlib -mhard-mul -mhard-div @gol
-msoft-mul -msoft-div @gol
+-msoft-float -mhard-float -mdouble-float -munordered-float @gol
-mcmov -mror -mrori -msext -msfimm -mshftimm}
@emph{PDP-11 Options}
@@ -23649,6 +23650,26 @@ This default is hardware divide.
Select software or hardware multiply (@code{l.mul}, @code{l.muli}) instructions.
This default is hardware multiply.
+@item -msoft-float
+@itemx -mhard-float
+@opindex msoft-float
+@opindex mhard-float
+Select software or hardware for floating point operations.
+The default is software.
+
+@item -mdouble-float
+@opindex mdouble-float
+When @option{-mhard-float} is selected, enables generation of double-precision
+floating point instructions. By default functions from @file{libgcc} are used
+to perform double-precision floating point operations.
+
+@item -munordered-float
+@opindex munordered-float
+When @option{-mhard-float} is selected, enables generation of unordered
+floating point compare and set flag (@code{lf.sfun*}) instructions. By default
+functions from @file{libgcc} are used to perform unordered floating point
+compare and set flag operations.
+
@item -mcmov
@opindex mcmov
Enable generation of conditional move (@code{l.cmov}) instructions. By