diff mbox

(v2) Add a "compact" mode to print_rtx_function

Message ID 1476304646-39819-1-git-send-email-dmalcolm@redhat.com
State New
Headers show

Commit Message

David Malcolm Oct. 12, 2016, 8:37 p.m. UTC
On Wed, 2016-10-12 at 19:31 +0200, Bernd Schmidt wrote:
> On 10/12/2016 07:48 PM, David Malcolm wrote:
> > This patch implements a "compact" mode for print_rtx_function,
> > implementing most of the ideas above.
> > 
> > Example of output can be seen here:
> >   https://dmalcolm.fedorapeople.org/gcc/2016-10-12/test-switch-comp
> > act.rtl
> > which can be contrasted with the non-compact output here:
> >   https://dmalcolm.fedorapeople.org/gcc/2016-10-12/test-switch-nonc
> > ompact.rtl
> > 
> > It adds the "c" prefix to the insn names, so we get "cinsn", etc. 
> >  However,
> > it does lead to things like this:
> > 
> >    (ccode_label 56 8 "")
> > 
> > which gives me pause: would the "ccode" in "ccode_label" be
> > confusing? (compared
> > to "ccmode").  An alternative might be to have a "compact-insn
> > -chain" vs
> > "insn-chain" wrapper element, expressing that this is a compact
> > dump.
> 
> Maybe "clabel" or something.

I've special-cased it to be "clabel" rather than "ccode_label".

> > OK for trunk if it passes?
> 
> I'd say yes - we're iterating and this seems to be an improvement.

It didn't pass, due to this change:

     (print_rtx_operand_code_i): When printing source locations, wrap
     xloc.file in quotes. [...snip...]

Note that this change isn't guarded by flag_compact; it affects all
dumps, which meant that this testcase stopped working:
  gcc.target/i386/vararg-loc.c
which used scan-rtl-dump to look for the insn location.

I had a look over the testsuite looking for other scan-rtl-dump
directives that could be affected by the change, and I didn't see any
though obviously I could have missed some.

The following is a revised version of the patch which updates this test case.

> > I think the only remaining item from our discussion above is what
> > to do
> > about the numbering of pseudos in the dumps (currently it just
> > prints the regno
> > unmodified).
> > 
> > Other than that, is the resultant dump format good enough that I
> > can start
> > rewriting the RTL frontend parser, or are there other changes you'd
> > want?
> 
> Give me a day or two to think it over, and for others to chime in.
> But I
> think this is reasonably close to what it should look like. Maybe
> empty
> edge flags don't need to be printed, and possibly there could be a
> more
> compact format for a large number edges like what you have for the
> switch?
> 
> > +  /* For insns, print the INSN_UID.
> > +     In compact mode, we only print the INSN_UID of CODE_LABELs. 
> >  */
> > +  if (!flag_compact || GET_CODE (in_rtx) == CODE_LABEL)
> > +    if (INSN_CHAIN_CODE_P (GET_CODE (in_rtx)))
> 
> The two ifs should be merged I think.
 
Changed in v2:
- fixes to gcc.target/i386/vararg-loc.c
- "clabel" rather than "ccode_label"
- merged the two "if"s

Successfully bootstrapped&regrtested on x86_64-pc-linux-gnu.

OK for trunk?

gcc/ChangeLog:
	* function-tests.c (selftest::test_expansion_to_rtl): Add "true"
	for new "compact" param of print_rtx_function.  Check for "cinsn"
	rather than "insn".
	* print-rtl-function.c (flag_compact): New decl.
	(print_rtx_function): Add param "compact" and use it to set
	flag_compact, adding a description of the effect to the leading
	comment, and updating the example output.
	* print-rtl.c (flag_compact): New variable.
	(print_rtx_operand_code_0): Omit the JUMP_LABEL reference in compact
	mode.
	(print_rtx_operand_code_i): When printing source locations, wrap
	xloc.file in quotes.  Don't print INSN_CODEs in compact mode.
	(print_rtx_operand_code_r): Don't print regnos for hard regs and
	virtuals in compact mode.
	(print_rtx_operand_code_u): Don't print insn UIDs in compact mode,
	apart from in LABEL_REFs.
	(print_rtx_operand): In case 'w', don't print in hex in compact mode.
	Don't print basic block ids in compact mode.
	(print_rtx):  In compact mode, prefix the code of insns with "c",
	only print the INSN_UID of CODE_LABELs, and omit their LABEL_NUSES.
	* print-rtl.h (print_rtx_function): Add "compact" param.

gcc/testsuite/ChangeLog:
	* gcc.target/i386/vararg-loc.c: Update for quoting of xloc.file
	in INSN_LOCATION.
---
 gcc/function-tests.c                       |  4 +-
 gcc/print-rtl-function.c                   | 76 +++++++++++++++++-------------
 gcc/print-rtl.c                            | 73 +++++++++++++++++++++-------
 gcc/print-rtl.h                            |  2 +-
 gcc/testsuite/gcc.target/i386/vararg-loc.c |  6 +--
 5 files changed, 107 insertions(+), 54 deletions(-)

Comments

Bernd Schmidt Oct. 13, 2016, 10:21 a.m. UTC | #1
On 10/12/2016 10:37 PM, David Malcolm wrote:
> It didn't pass, due to this change:
>
>      (print_rtx_operand_code_i): When printing source locations, wrap
>      xloc.file in quotes. [...snip...]
[...]
> The following is a revised version of the patch which updates this test case.

Also ok. This reminds me, wrapping the filename in quotes was a side 
issue - what I was really hoping for was to have testcases without this 
visual clutter unless they wanted to explicitly test functionality 
related to it.


Bernd
Dominik Vogt Nov. 22, 2016, 1:18 p.m. UTC | #2
On Wed, Oct 12, 2016 at 04:37:26PM -0400, David Malcolm wrote:
> On Wed, 2016-10-12 at 19:31 +0200, Bernd Schmidt wrote:
> > On 10/12/2016 07:48 PM, David Malcolm wrote:
> > > This patch implements a "compact" mode for print_rtx_function,
> > > implementing most of the ideas above.
> > > 
> > > Example of output can be seen here:
> > >   https://dmalcolm.fedorapeople.org/gcc/2016-10-12/test-switch-comp
> > > act.rtl
> > > which can be contrasted with the non-compact output here:
> > >   https://dmalcolm.fedorapeople.org/gcc/2016-10-12/test-switch-nonc
> > > ompact.rtl
> > > 
> > > It adds the "c" prefix to the insn names, so we get "cinsn", etc. 
> > >  However,
> > > it does lead to things like this:
> > > 
> > >    (ccode_label 56 8 "")
> > > 
> > > which gives me pause: would the "ccode" in "ccode_label" be
> > > confusing? (compared
> > > to "ccmode").  An alternative might be to have a "compact-insn
> > > -chain" vs
> > > "insn-chain" wrapper element, expressing that this is a compact
> > > dump.

> --- a/gcc/print-rtl.c
> +++ b/gcc/print-rtl.c
...
> @@ -284,7 +292,7 @@ print_rtx_operand_code_i (const_rtx in_rtx, int idx)
>        if (INSN_HAS_LOCATION (in_insn))
>  	{
>  	  expanded_location xloc = insn_location (in_insn);
> -	  fprintf (outfile, " %s:%i", xloc.file, xloc.line);
> +	  fprintf (outfile, " \"%s\":%i", xloc.file, xloc.line);

Was this change intentional?  We've got to update a scan-assembler
statement in an s390 test to reflect the additional double quotes
in the output string.  Not a big deal, just wanted to make sure
this is not an accident.

Ciao

Dominik ^_^  ^_^
Bernd Schmidt Nov. 22, 2016, 1:32 p.m. UTC | #3
On 11/22/2016 02:18 PM, Dominik Vogt wrote:

>> @@ -284,7 +292,7 @@ print_rtx_operand_code_i (const_rtx in_rtx, int idx)
>>        if (INSN_HAS_LOCATION (in_insn))
>>  	{
>>  	  expanded_location xloc = insn_location (in_insn);
>> -	  fprintf (outfile, " %s:%i", xloc.file, xloc.line);
>> +	  fprintf (outfile, " \"%s\":%i", xloc.file, xloc.line);
>
> Was this change intentional?  We've got to update a scan-assembler
> statement in an s390 test to reflect the additional double quotes
> in the output string.  Not a big deal, just wanted to make sure
> this is not an accident.

The idea was to make the output less ambiguous for file names with spaces.


Bernd
Jakub Jelinek Nov. 22, 2016, 1:37 p.m. UTC | #4
On Tue, Nov 22, 2016 at 02:32:39PM +0100, Bernd Schmidt wrote:
> On 11/22/2016 02:18 PM, Dominik Vogt wrote:
> 
> >>@@ -284,7 +292,7 @@ print_rtx_operand_code_i (const_rtx in_rtx, int idx)
> >>       if (INSN_HAS_LOCATION (in_insn))
> >> 	{
> >> 	  expanded_location xloc = insn_location (in_insn);
> >>-	  fprintf (outfile, " %s:%i", xloc.file, xloc.line);
> >>+	  fprintf (outfile, " \"%s\":%i", xloc.file, xloc.line);
> >
> >Was this change intentional?  We've got to update a scan-assembler
> >statement in an s390 test to reflect the additional double quotes
> >in the output string.  Not a big deal, just wanted to make sure
> >this is not an accident.
> 
> The idea was to make the output less ambiguous for file names with spaces.

Can't it be done only if xloc.file contains any fancy characters?
If it does (where fancy should be anything other than [a-zA-Z/_0-9.-] or
some other reasonable definition, certainly space, quotes, backslash, etc. would count),
shouldn't we adjust it (e.g. use \" instead of ", handle control characters
etc.)?

	Jakub
David Malcolm Nov. 22, 2016, 2:25 p.m. UTC | #5
On Tue, 2016-11-22 at 14:37 +0100, Jakub Jelinek wrote:
> On Tue, Nov 22, 2016 at 02:32:39PM +0100, Bernd Schmidt wrote:
> > On 11/22/2016 02:18 PM, Dominik Vogt wrote:
> > 
> > > > @@ -284,7 +292,7 @@ print_rtx_operand_code_i (const_rtx in_rtx,
> > > > int idx)
> > > >       if (INSN_HAS_LOCATION (in_insn))
> > > > 	{
> > > > 	  expanded_location xloc = insn_location (in_insn);
> > > > -	  fprintf (outfile, " %s:%i", xloc.file, xloc.line);
> > > > +	  fprintf (outfile, " \"%s\":%i", xloc.file,
> > > > xloc.line);
> > > 
> > > Was this change intentional?  We've got to update a scan
> > > -assembler
> > > statement in an s390 test to reflect the additional double quotes
> > > in the output string.  Not a big deal, just wanted to make sure
> > > this is not an accident.

Sorry about the breakage.

How widespread is the problem?

> > The idea was to make the output less ambiguous for file names with
> > spaces.
> 
> Can't it be done only if xloc.file contains any fancy characters?
> If it does (where fancy should be anything other than [a-zA-Z/_0-9.-]
> or
> some other reasonable definition, certainly space, quotes, backslash,
> etc. would count),
> shouldn't we adjust it (e.g. use \" instead of ", handle control
> characters
> etc.)?

The idea was that quotes also make the output somewhat easier for the
RTL frontend to parse, though reading the latest version of the RTL
frontend patches, it looks like I don't make use of them yet.

Another approach would be to only use the quotes when the dump is in
"compact" mode, since compact mode is the format that the RTL frontend
parses: the RTL dumps emitted by DejaGnu don't use it, instead using
the older style.
Bernd Schmidt Nov. 22, 2016, 2:38 p.m. UTC | #6
On 11/22/2016 02:37 PM, Jakub Jelinek wrote:
> Can't it be done only if xloc.file contains any fancy characters?

Sure, but why? Strings generally get emitted with quotes around them, I 
don't see a good reason for filenames to be different, especially if it 
makes the output easier to parse.

> If it does (where fancy should be anything other than [a-zA-Z/_0-9.-] or
> some other reasonable definition, certainly space, quotes, backslash, etc. would count),
> shouldn't we adjust it (e.g. use \" instead of ", handle control characters
> etc.)?

The way I see it, spaces in filenames are regrettably somewhat common. 
Backslashes and quotes rather less so, to the point I really don't see a 
need to worry about them at the moment, and the necessary quoting could 
be added later if really necessary.


Bernd
Dominik Vogt Nov. 22, 2016, 2:38 p.m. UTC | #7
On Tue, Nov 22, 2016 at 09:25:03AM -0500, David Malcolm wrote:
> On Tue, 2016-11-22 at 14:37 +0100, Jakub Jelinek wrote:
> > On Tue, Nov 22, 2016 at 02:32:39PM +0100, Bernd Schmidt wrote:
> > > On 11/22/2016 02:18 PM, Dominik Vogt wrote:
> > > 
> > > > > @@ -284,7 +292,7 @@ print_rtx_operand_code_i (const_rtx in_rtx,
> > > > > int idx)
> > > > >       if (INSN_HAS_LOCATION (in_insn))
> > > > > 	{
> > > > > 	  expanded_location xloc = insn_location (in_insn);
> > > > > -	  fprintf (outfile, " %s:%i", xloc.file, xloc.line);
> > > > > +	  fprintf (outfile, " \"%s\":%i", xloc.file,
> > > > > xloc.line);
> > > > 
> > > > Was this change intentional?  We've got to update a scan
> > > > -assembler
> > > > statement in an s390 test to reflect the additional double quotes
> > > > in the output string.  Not a big deal, just wanted to make sure
> > > > this is not an accident.
> 
> Sorry about the breakage.
> 
> How widespread is the problem?

In the s390 tests, it is only a single scan-assembler.  Not sure
whether these are affected or not:

gcc.dg/debug/dwarf2/pr29609-1.c:/* { dg-final { scan-assembler "pr29609-1.c:18" } } */
gcc.dg/debug/dwarf2/pr29609-2.c:/* { dg-final { scan-assembler "pr29609-2.c:27" } } */
...
gcc.dg/debug/dwarf2/pr36690-1.c:/* { dg-final { scan-assembler "pr36690-1.c:11" } } */
gcc.dg/debug/dwarf2/pr36690-2.c:/* { dg-final { scan-assembler "pr36690-2.c:24" } } */
gcc.dg/debug/dwarf2/pr36690-3.c:/* { dg-final { scan-assembler "pr36690-3.c:19" } } */
...
gcc.dg/debug/dwarf2/pr37616.c:/* { dg-final { scan-assembler "pr37616.c:17" } } */
...
gcc.dg/debug/dwarf2/short-circuit.c:/* { dg-final { scan-assembler "short-circuit.c:11" } } */
...

(List generated with

  $ cd testsuite
  $ grep -r "scan-assembler.*[.]c.\?.\?.\?:" .
)

Ciao

Dominik ^_^  ^_^
Jakub Jelinek Nov. 22, 2016, 2:45 p.m. UTC | #8
On Tue, Nov 22, 2016 at 03:38:04PM +0100, Bernd Schmidt wrote:
> On 11/22/2016 02:37 PM, Jakub Jelinek wrote:
> >Can't it be done only if xloc.file contains any fancy characters?
> 
> Sure, but why? Strings generally get emitted with quotes around them, I
> don't see a good reason for filenames to be different, especially if it
> makes the output easier to parse.

Because printing common filenames matches what we emit in diagnostics,
what e.g. sanitizers emit at runtime diagnostics, what we emit as locations
in gimple dumps etc.

	Jakub
diff mbox

Patch

diff --git a/gcc/function-tests.c b/gcc/function-tests.c
index 049a07f9..b0c44cf 100644
--- a/gcc/function-tests.c
+++ b/gcc/function-tests.c
@@ -648,7 +648,7 @@  test_expansion_to_rtl ()
   /* Verify that print_rtl_function is sane.  */
   named_temp_file tmp_out (".rtl");
   FILE *outfile = fopen (tmp_out.get_filename (), "w");
-  print_rtx_function (outfile, fun);
+  print_rtx_function (outfile, fun, true);
   fclose (outfile);
 
   char *dump = read_file (SELFTEST_LOCATION, tmp_out.get_filename ());
@@ -656,7 +656,7 @@  test_expansion_to_rtl ()
   ASSERT_STR_CONTAINS (dump, "  (insn-chain\n");
   ASSERT_STR_CONTAINS (dump, "    (block 2\n");
   ASSERT_STR_CONTAINS (dump, "      (edge-from entry (flags \"FALLTHRU\"))\n");
-  ASSERT_STR_CONTAINS (dump, "      (insn "); /* ...etc.  */
+  ASSERT_STR_CONTAINS (dump, "      (cinsn "); /* ...etc.  */
   ASSERT_STR_CONTAINS (dump, "      (edge-to exit (flags \"FALLTHRU\"))\n");
   ASSERT_STR_CONTAINS (dump, "    ) ;; block 2\n");
   ASSERT_STR_CONTAINS (dump, "  ) ;; insn-chain\n");
diff --git a/gcc/print-rtl-function.c b/gcc/print-rtl-function.c
index 4f9b4ef..90a0ff7 100644
--- a/gcc/print-rtl-function.c
+++ b/gcc/print-rtl-function.c
@@ -33,6 +33,8 @@  along with GCC; see the file COPYING3.  If not see
 #include "langhooks.h"
 #include "emit-rtl.h"
 
+extern bool flag_compact;
+
 /* Print an "(edge-from)" or "(edge-to)" directive describing E
    to OUTFILE.  */
 
@@ -126,55 +128,63 @@  can_have_basic_block_p (const rtx_insn *insn)
    the basic blocks of insns in the chain, wrapping those that are within
    blocks within "(block)" directives.
 
-   Example output:
+   If COMPACT, then instructions are printed in a compact form:
+   - INSN_UIDs are omitted, except for jumps and CODE_LABELs,
+   - INSN_CODEs are omitted,
+   - register numbers are omitted for hard and virtual regs
+   - insn names are prefixed with "c" (e.g. "cinsn", "cnote", etc)
+
+   Example output (with COMPACT==true):
 
    (function "times_two"
      (insn-chain
-       (note 1 0 4 (nil) NOTE_INSN_DELETED)
+       (cnote NOTE_INSN_DELETED)
        (block 2
 	 (edge-from entry (flags "FALLTHRU"))
-	 (note 4 1 2 2 [bb 2] NOTE_INSN_BASIC_BLOCK)
-	 (insn 2 4 3 2 (set (mem/c:SI (plus:DI (reg/f:DI 82 virtual-stack-vars)
-			     (const_int -4 [0xfffffffffffffffc])) [1 i+0 S4 A32])
-		     (reg:SI 5 di [ i ])) t.c:2 -1
-		  (nil))
-	 (note 3 2 6 2 NOTE_INSN_FUNCTION_BEG)
-	 (insn 6 3 7 2 (set (reg:SI 89)
-		     (mem/c:SI (plus:DI (reg/f:DI 82 virtual-stack-vars)
-			     (const_int -4 [0xfffffffffffffffc])) [1 i+0 S4 A32])) t.c:3 -1
-		  (nil))
-	 (insn 7 6 10 2 (parallel [
-			 (set (reg:SI 87 [ _2 ])
-			     (ashift:SI (reg:SI 89)
-				 (const_int 1 [0x1])))
-			 (clobber (reg:CC 17 flags))
-		     ]) t.c:3 -1
-		  (expr_list:REG_EQUAL (ashift:SI (mem/c:SI (plus:DI (reg/f:DI 82 virtual-stack-vars)
-				 (const_int -4 [0xfffffffffffffffc])) [1 i+0 S4 A32])
-			 (const_int 1 [0x1]))
-		     (nil)))
-	 (insn 10 7 14 2 (set (reg:SI 88 [ <retval> ])
-		     (reg:SI 87 [ _2 ])) t.c:3 -1
-		  (nil))
-	 (insn 14 10 15 2 (set (reg/i:SI 0 ax)
-		     (reg:SI 88 [ <retval> ])) t.c:4 -1
-		  (nil))
-	 (insn 15 14 0 2 (use (reg/i:SI 0 ax)) t.c:4 -1
-		  (nil))
+	 (cnote [bb 2] NOTE_INSN_BASIC_BLOCK)
+	 (cinsn (set (mem/c:SI (plus:DI (reg/f:DI virtual-stack-vars)
+			       (const_int -4)) [1 i+0 S4 A32])
+		       (reg:SI di [ i ])) "t.c":2
+		   (nil))
+	 (cnote NOTE_INSN_FUNCTION_BEG)
+	 (cinsn (set (reg:SI 89)
+		       (mem/c:SI (plus:DI (reg/f:DI virtual-stack-vars)
+			       (const_int -4)) [1 i+0 S4 A32])) "t.c":3
+		   (nil))
+	 (cinsn (parallel [
+			   (set (reg:SI 87 [ _2 ])
+			       (ashift:SI (reg:SI 89)
+				   (const_int 1)))
+			   (clobber (reg:CC flags))
+		       ]) "t.c":3
+		   (expr_list:REG_EQUAL (ashift:SI (mem/c:SI (plus:DI (reg/f:DI virtual-stack-vars)
+				   (const_int -4)) [1 i+0 S4 A32])
+			   (const_int 1))
+		       (nil)))
+	 (cinsn (set (reg:SI 88 [ <retval> ])
+		       (reg:SI 87 [ _2 ])) "t.c":3
+		   (nil))
+	 (cinsn (set (reg/i:SI ax)
+		       (reg:SI 88 [ <retval> ])) "t.c":4
+		   (nil))
+	 (cinsn (use (reg/i:SI ax)) "t.c":4
+		   (nil))
 	 (edge-to exit (flags "FALLTHRU"))
        ) ;; block 2
      ) ;; insn-chain
      (crtl
        (return_rtx
-	  (reg/i:SI 0 ax)
+	 (reg/i:SI ax)
        ) ;; return_rtx
      ) ;; crtl
    ) ;; function "times_two"
 */
 
 DEBUG_FUNCTION void
-print_rtx_function (FILE *outfile, function *fn)
+print_rtx_function (FILE *outfile, function *fn, bool compact)
 {
+  flag_compact = compact;
+
   tree fdecl = fn->decl;
 
   const char *dname = lang_hooks.decl_printable_name (fdecl, 2);
@@ -210,4 +220,6 @@  print_rtx_function (FILE *outfile, function *fn)
   fprintf (outfile, "  ) ;; crtl\n");
 
   fprintf (outfile, ") ;; function \"%s\"\n", dname);
+
+  flag_compact = false;
 }
diff --git a/gcc/print-rtl.c b/gcc/print-rtl.c
index 29e8ee2..f114cb4 100644
--- a/gcc/print-rtl.c
+++ b/gcc/print-rtl.c
@@ -60,6 +60,13 @@  static int indent;
 
 static bool in_call_function_usage;
 
+/* If true, use compact dump format:
+   - INSN_UIDs are omitted, except for jumps and CODE_LABELs,
+   - INSN_CODEs are omitted,
+   - register numbers are omitted for hard and virtual regs
+   - insn names are prefixed with "c" (e.g. "cinsn", "cnote", etc).  */
+bool flag_compact;
+
 static void print_rtx (const_rtx);
 
 /* String printed at beginning of each RTL when it is dumped.
@@ -176,7 +183,8 @@  print_rtx_operand_code_0 (const_rtx in_rtx ATTRIBUTE_UNUSED,
 	  break;
 	}
     }
-  else if (idx == 7 && JUMP_P (in_rtx) && JUMP_LABEL (in_rtx) != NULL)
+  else if (idx == 7 && JUMP_P (in_rtx) && JUMP_LABEL (in_rtx) != NULL
+	   && !flag_compact)
     {
       /* Output the JUMP_LABEL reference.  */
       fprintf (outfile, "\n%s%*s -> ", print_rtx_head, indent * 2, "");
@@ -284,7 +292,7 @@  print_rtx_operand_code_i (const_rtx in_rtx, int idx)
       if (INSN_HAS_LOCATION (in_insn))
 	{
 	  expanded_location xloc = insn_location (in_insn);
-	  fprintf (outfile, " %s:%i", xloc.file, xloc.line);
+	  fprintf (outfile, " \"%s\":%i", xloc.file, xloc.line);
 	}
 #endif
     }
@@ -335,6 +343,13 @@  print_rtx_operand_code_i (const_rtx in_rtx, int idx)
       const char *name;
       int is_insn = INSN_P (in_rtx);
 
+      /* Don't print INSN_CODEs in compact mode.  */
+      if (flag_compact && is_insn && &INSN_CODE (in_rtx) == &XINT (in_rtx, idx))
+	{
+	  sawclose = 0;
+	  return;
+	}
+
       if (flag_dump_unnumbered
 	  && (is_insn || NOTE_P (in_rtx)))
 	fputc ('#', outfile);
@@ -358,26 +373,28 @@  print_rtx_operand_code_r (const_rtx in_rtx)
   unsigned int regno = REGNO (in_rtx);
 
 #ifndef GENERATOR_FILE
+  /* For hard registers and virtuals, always print the
+     regno, except in compact mode.  */
+  if (regno <= LAST_VIRTUAL_REGISTER && !flag_compact)
+    fprintf (outfile, " %d", regno);
   if (regno < FIRST_PSEUDO_REGISTER)
-    fprintf (outfile, " %d %s", regno, reg_names[regno]);
+    fprintf (outfile, " %s", reg_names[regno]);
   else if (regno <= LAST_VIRTUAL_REGISTER)
     {
       if (regno == VIRTUAL_INCOMING_ARGS_REGNUM)
-	fprintf (outfile, " %d virtual-incoming-args", regno);
+	fprintf (outfile, " virtual-incoming-args");
       else if (regno == VIRTUAL_STACK_VARS_REGNUM)
-	fprintf (outfile, " %d virtual-stack-vars", regno);
+	fprintf (outfile, " virtual-stack-vars");
       else if (regno == VIRTUAL_STACK_DYNAMIC_REGNUM)
-	fprintf (outfile, " %d virtual-stack-dynamic", regno);
+	fprintf (outfile, " virtual-stack-dynamic");
       else if (regno == VIRTUAL_OUTGOING_ARGS_REGNUM)
-	fprintf (outfile, " %d virtual-outgoing-args", regno);
+	fprintf (outfile, " virtual-outgoing-args");
       else if (regno == VIRTUAL_CFA_REGNUM)
-	fprintf (outfile, " %d virtual-cfa", regno);
+	fprintf (outfile, " virtual-cfa");
       else if (regno == VIRTUAL_PREFERRED_STACK_BOUNDARY_REGNUM)
-	fprintf (outfile, " %d virtual-preferred-stack-boundary",
-		 regno);
+	fprintf (outfile, " virtual-preferred-stack-boundary");
       else
-	fprintf (outfile, " %d virtual-reg-%d", regno,
-		 regno-FIRST_VIRTUAL_REGISTER);
+	fprintf (outfile, " virtual-reg-%d", regno-FIRST_VIRTUAL_REGISTER);
     }
   else
 #endif
@@ -410,6 +427,10 @@  print_rtx_operand_code_r (const_rtx in_rtx)
 static void
 print_rtx_operand_code_u (const_rtx in_rtx, int idx)
 {
+  /* Don't print insn UIDs in compact mode, apart from in LABEL_REFs.  */
+  if (flag_compact && GET_CODE (in_rtx) != LABEL_REF)
+    return;
+
   if (XEXP (in_rtx, idx) != NULL)
     {
       rtx sub = XEXP (in_rtx, idx);
@@ -492,7 +513,7 @@  print_rtx_operand (const_rtx in_rtx, int idx)
       if (! flag_simple)
 	fprintf (outfile, " ");
       fprintf (outfile, HOST_WIDE_INT_PRINT_DEC, XWINT (in_rtx, idx));
-      if (! flag_simple)
+      if (! flag_simple && !flag_compact)
 	fprintf (outfile, " [" HOST_WIDE_INT_PRINT_HEX "]",
 		 (unsigned HOST_WIDE_INT) XWINT (in_rtx, idx));
       break;
@@ -533,6 +554,9 @@  print_rtx_operand (const_rtx in_rtx, int idx)
       break;
 
     case 'B':
+      /* Don't print basic block ids in compact mode.  */
+      if (flag_compact)
+	break;
 #ifndef GENERATOR_FILE
       if (XBBDEF (in_rtx, idx))
 	fprintf (outfile, " %i", XBBDEF (in_rtx, idx)->index);
@@ -575,7 +599,20 @@  print_rtx (const_rtx in_rtx)
     }
 
   /* Print name of expression code.  */
-  if (flag_simple && CONST_INT_P (in_rtx))
+
+  /* In compact mode, prefix the code of insns with "c",
+     giving "cinsn", "cnote" etc.  */
+  if (flag_compact && is_a <const rtx_insn *, const struct rtx_def> (in_rtx))
+    {
+      /* "ccode_label" is slightly awkward, so special-case it as
+	 just "clabel".  */
+      rtx_code code = GET_CODE (in_rtx);
+      if (code == CODE_LABEL)
+	fprintf (outfile, "(clabel");
+      else
+	fprintf (outfile, "(c%s", GET_RTX_NAME (code));
+    }
+  else if (flag_simple && CONST_INT_P (in_rtx))
     fputc ('(', outfile);
   else
     fprintf (outfile, "(%s", GET_RTX_NAME (GET_CODE (in_rtx)));
@@ -639,7 +676,10 @@  print_rtx (const_rtx in_rtx)
     idx = 5;
 #endif
 
-  if (INSN_CHAIN_CODE_P (GET_CODE (in_rtx)))
+  /* For insns, print the INSN_UID.
+     In compact mode, we only print the INSN_UID of CODE_LABELs.  */
+  if (INSN_CHAIN_CODE_P (GET_CODE (in_rtx))
+      && (!flag_compact || GET_CODE (in_rtx) == CODE_LABEL))
     {
       if (flag_dump_unnumbered)
 	fprintf (outfile, " #");
@@ -704,7 +744,8 @@  print_rtx (const_rtx in_rtx)
 #endif
 
     case CODE_LABEL:
-      fprintf (outfile, " [%d uses]", LABEL_NUSES (in_rtx));
+      if (!flag_compact)
+	fprintf (outfile, " [%d uses]", LABEL_NUSES (in_rtx));
       switch (LABEL_KIND (in_rtx))
 	{
 	  case LABEL_NORMAL: break;
diff --git a/gcc/print-rtl.h b/gcc/print-rtl.h
index 9cad683..7a1dcaf 100644
--- a/gcc/print-rtl.h
+++ b/gcc/print-rtl.h
@@ -36,6 +36,6 @@  extern void print_insn (pretty_printer *pp, const rtx_insn *x, int verbose);
 extern void rtl_dump_bb_for_graph (pretty_printer *, basic_block);
 extern const char *str_pattern_slim (const_rtx);
 
-extern void print_rtx_function (FILE *file, function *fn);
+extern void print_rtx_function (FILE *file, function *fn, bool compact);
 
 #endif  // GCC_PRINT_RTL_H
diff --git a/gcc/testsuite/gcc.target/i386/vararg-loc.c b/gcc/testsuite/gcc.target/i386/vararg-loc.c
index 8134ba8..f46ac57 100644
--- a/gcc/testsuite/gcc.target/i386/vararg-loc.c
+++ b/gcc/testsuite/gcc.target/i386/vararg-loc.c
@@ -22,6 +22,6 @@  f (int a, ...)			/* 8.  */
   return sum;
 }
 
-/* { dg-final { scan-rtl-dump-not "vararg-loc\\.c:\[6789\] " "final" } } */
-/* { dg-final { scan-rtl-dump "vararg-loc\\.c:18 " "final" } } */
-/* { dg-final { scan-rtl-dump "vararg-loc\\.c:20 " "final" } } */
+/* { dg-final { scan-rtl-dump-not "vararg-loc\\.c.:\[6789\] " "final" } } */
+/* { dg-final { scan-rtl-dump "vararg-loc\\.c.:18 " "final" } } */
+/* { dg-final { scan-rtl-dump "vararg-loc\\.c.:20 " "final" } } */