Index: config/avr/avr.c
===================================================================
--- config/avr/avr.c	(revision 237643)
+++ config/avr/avr.c	(working copy)
@@ -5346,6 +5346,34 @@ avr_out_compare (rtx_insn *insn, rtx *xo
         }
     }
 
+  /* Comparisons == -1 and != -1 of a d-register that's used after the
+     comparison.  (If it's unused after we use CPI / SBCI or ADIW sequence
+     from below.)  Instead of  CPI Rlo,-1 / LDI Rx,-1 / CPC Rhi,Rx  we can
+     use  CPI Rlo,-1 / CPC Rhi,Rlo  which is 1 instruction shorter:
+     If CPI is true then Rlo contains -1 and we can use Rlo instead of Rx
+     when CPC'ing the high part.  If CPI is false then CPC cannot render
+     the result to true.  This also works for the more generic case where
+     the constant is of the form 0xabab.  */
+
+  if (n_bytes == 2
+      && xval != 0
+      && test_hard_reg_class (LD_REGS, xreg)
+      && compare_eq_p (insn)
+      && !reg_unused_after (insn, xreg))
+    {
+      rtx xlo8 = simplify_gen_subreg (QImode, xval, mode, 0);
+      rtx xhi8 = simplify_gen_subreg (QImode, xval, mode, 1);
+
+      if (INTVAL (xlo8) == INTVAL (xhi8))
+        {
+          xop[0] = xreg;
+          xop[1] = xlo8;
+
+          return avr_asm_len ("cpi %A0,%1"  CR_TAB
+                              "cpc %B0,%A0", xop, plen, 2);
+        }
+    }
+
   for (i = 0; i < n_bytes; i++)
     {
       /* We compare byte-wise.  */
@@ -7687,11 +7715,11 @@ avr_out_bitop (rtx insn, rtx *xop, int *
 
   /* op[0]: 8-bit destination register
      op[1]: 8-bit const int
-     op[2]: 8-bit clobber register or SCRATCH
+     op[2]: 8-bit clobber register, SCRATCH or NULL_RTX.
      op[3]: 8-bit register containing 0xff or NULL_RTX  */
   rtx op[4];
 
-  op[2] = xop[3];
+  op[2] = QImode == mode ? NULL_RTX : xop[3];
   op[3] = NULL_RTX;
 
   if (plen)
Index: config/avr/avr.md
===================================================================
--- config/avr/avr.md	(revision 237643)
+++ config/avr/avr.md	(working copy)
@@ -1240,6 +1240,33 @@ (define_insn "*addhi3.sign_extend1"
   [(set_attr "length" "5")
    (set_attr "cc" "clobber")])
 
+(define_insn "*addhi3_zero_extend.const"
+  [(set (match_operand:HI 0 "register_operand"                         "=d")
+        (plus:HI (zero_extend:HI (match_operand:QI 1 "register_operand" "0"))
+                 (match_operand:HI 2 "const_m255_to_m1_operand"         "Cn8")))]
+  ""
+  "subi %A0,%n2\;sbc %B0,%B0"
+  [(set_attr "length" "2")
+   (set_attr "cc" "set_czn")])
+
+(define_insn "*usum_widenqihi3"
+  [(set (match_operand:HI 0 "register_operand"                          "=r")
+        (plus:HI (zero_extend:HI (match_operand:QI 1 "register_operand"  "0"))
+                 (zero_extend:HI (match_operand:QI 2 "register_operand"  "r"))))]
+  ""
+  "add %A0,%2\;clr %B0\;rol %B0"
+  [(set_attr "length" "3")
+   (set_attr "cc" "clobber")])
+
+(define_insn "*udiff_widenqihi3"
+  [(set (match_operand:HI 0 "register_operand"                           "=r")
+        (minus:HI (zero_extend:HI (match_operand:QI 1 "register_operand"  "0"))
+                  (zero_extend:HI (match_operand:QI 2 "register_operand"  "r"))))]
+  ""
+  "sub %A0,%2\;sbc %B0,%B0"
+  [(set_attr "length" "2")
+   (set_attr "cc" "set_czn")])
+    
 (define_insn "*addhi3_sp"
   [(set (match_operand:HI 1 "stack_register_operand"           "=q")
         (plus:HI (match_operand:HI 2 "stack_register_operand"   "q")
@@ -3102,15 +3129,16 @@ (define_insn "*udivmodsi4_call"
 ; and
 
 (define_insn "andqi3"
-  [(set (match_operand:QI 0 "register_operand"       "=??r,d")
-        (and:QI (match_operand:QI 1 "register_operand" "%0,0")
-                (match_operand:QI 2 "nonmemory_operand" "r,i")))]
+  [(set (match_operand:QI 0 "register_operand"       "=??r,d,*l")
+        (and:QI (match_operand:QI 1 "register_operand" "%0,0,0")
+                (match_operand:QI 2 "nonmemory_operand" "r,i,Ca1")))]
   ""
   "@
 	and %0,%2
-	andi %0,lo8(%2)"
-  [(set_attr "length" "1,1")
-   (set_attr "cc" "set_zn,set_zn")])
+	andi %0,lo8(%2)
+	* return avr_out_bitop (insn, operands, NULL);"
+  [(set_attr "length" "1,1,2")
+   (set_attr "cc" "set_zn,set_zn,none")])
 
 (define_insn "andhi3"
   [(set (match_operand:HI 0 "register_operand"       "=??r,d,d,r  ,r")
@@ -3184,15 +3212,16 @@ (define_peephole2 ; andi
 ;; ior
 
 (define_insn "iorqi3"
-  [(set (match_operand:QI 0 "register_operand"       "=??r,d")
-        (ior:QI (match_operand:QI 1 "register_operand" "%0,0")
-                (match_operand:QI 2 "nonmemory_operand" "r,i")))]
+  [(set (match_operand:QI 0 "register_operand"       "=??r,d,*l")
+        (ior:QI (match_operand:QI 1 "register_operand" "%0,0,0")
+                (match_operand:QI 2 "nonmemory_operand" "r,i,Co1")))]
   ""
   "@
 	or %0,%2
-	ori %0,lo8(%2)"
-  [(set_attr "length" "1,1")
-   (set_attr "cc" "set_zn,set_zn")])
+	ori %0,lo8(%2)
+        * return avr_out_bitop (insn, operands, NULL);"
+  [(set_attr "length" "1,1,2")
+   (set_attr "cc" "set_zn,set_zn,none")])
 
 (define_insn "iorhi3"
   [(set (match_operand:HI 0 "register_operand"       "=??r,d,d,r  ,r")
@@ -4607,6 +4636,25 @@ (define_insn "*cmpqi_sign_extend"
   [(set_attr "cc" "compare")
    (set_attr "length" "1")])
 
+
+(define_insn "*cmphi.zero-extend.0"
+  [(set (cc0)
+        (compare (zero_extend:HI (match_operand:QI 0 "register_operand" "r"))
+                 (match_operand:HI 1 "register_operand" "r")))]
+  ""
+  "cp %0,%A1\;cpc __zero_reg__,%B1"
+  [(set_attr "cc" "compare")
+   (set_attr "length" "2")])
+
+(define_insn "*cmphi.zero-extend.1"
+  [(set (cc0)
+        (compare (match_operand:HI 0 "register_operand" "r")
+                 (zero_extend:HI (match_operand:QI 1 "register_operand" "r"))))]
+  ""
+  "cp %A0,%1\;cpc %B0,__zero_reg__"
+  [(set_attr "cc" "compare")
+   (set_attr "length" "2")])
+
 ;; "*cmphi"
 ;; "*cmphq" "*cmpuhq"
 ;; "*cmpha" "*cmpuha"
Index: config/avr/constraints.md
===================================================================
--- config/avr/constraints.md	(revision 237643)
+++ config/avr/constraints.md	(working copy)
@@ -133,6 +133,11 @@ (define_constraint "C07"
   (and (match_code "const_int")
        (match_test "ival == 7")))
 
+(define_constraint "Ca1"
+  "Constant 1-byte integer that allows AND by means of CLT + BLD."
+  (and (match_code "const_int")
+       (match_test "avr_popcount_each_byte (op, 1, 1<<7)")))
+
 (define_constraint "Ca2"
   "Constant 2-byte integer that allows AND without clobber register."
   (and (match_code "const_int")
@@ -148,6 +153,11 @@ (define_constraint "Ca4"
   (and (match_code "const_int")
        (match_test "avr_popcount_each_byte (op, 4, (1<<0) | (1<<7) | (1<<8))")))
 
+(define_constraint "Co1"
+  "Constant 1-byte integer that allows AND by means of SET + BLD."
+  (and (match_code "const_int")
+       (match_test "avr_popcount_each_byte (op, 1, 1<<1)")))
+
 (define_constraint "Co2"
   "Constant 2-byte integer that allows OR without clobber register."
   (and (match_code "const_int")
@@ -193,6 +203,11 @@ (define_constraint "C0f"
   (and (match_code "const_int")
        (match_test "!avr_has_nibble_0xf (op)")))
 
+(define_constraint "Cn8"
+  "A negative constant integer in the range @minus{}255 @dots{} @minus{}1."
+  (and (match_code "const_int")
+       (match_test "IN_RANGE (ival, -255, -1)")))
+
 ;; CONST_FIXED is no element of 'n' so cook our own.
 ;; "i" or "s" would match but because the insn uses iterators that cover
 ;; INT_MODE, "i" or "s" is not always possible.
@@ -230,6 +245,12 @@ (define_constraint "Ym2"
             (match_test "-2 == INTVAL (avr_to_int_mode (op))"))
        (match_test "satisfies_constraint_Cm2 (op)")))
 
+(define_constraint "Yx2"
+  "Fixed-point or integer constant not in the range @minus{}2 @dots{} 2"
+  (and (ior (match_code "const_int")
+            (match_code "const_fixed"))
+       (match_test "!IN_RANGE (INTVAL (avr_to_int_mode (op)), -2, 2)")))
+
 ;; Similar to "IJ" used with ADIW/SBIW, but for CONST_FIXED.
 
 (define_constraint "YIJ"
Index: config/avr/predicates.md
===================================================================
--- config/avr/predicates.md	(revision 237643)
+++ config/avr/predicates.md	(working copy)
@@ -114,6 +114,11 @@ (define_predicate "const_2_to_6_operand"
   (and (match_code "const_int")
        (match_test "IN_RANGE (INTVAL (op), 2, 6)")))
 
+;; Return 1 if OP is constant integer -255..-1.
+(define_predicate "const_m255_to_m1_operand"
+  (and (match_code "const_int")
+       (match_test "IN_RANGE (INTVAL (op), -255, -1)")))
+
 ;; Returns true if OP is either the constant zero or a register.
 (define_predicate "reg_or_0_operand"
   (ior (match_operand 0 "register_operand")
