@@ -214,6 +214,11 @@ UNSUPPORTED_FEATURES += CONFIG_GFXNVIDIA=yes
else
override CONFIG_GFXNVIDIA = no
endif
+ifeq ($(CONFIG_AST2400), yes)
+UNSUPPORTED_FEATURES += CONFIG_AST2400=yes
+else
+override CONFIG_AST2400 = no
+endif
ifeq ($(CONFIG_SATASII), yes)
UNSUPPORTED_FEATURES += CONFIG_SATASII=yes
else
@@ -441,6 +446,11 @@ UNSUPPORTED_FEATURES += CONFIG_GFXNVIDIA=yes
else
override CONFIG_GFXNVIDIA = no
endif
+ifeq ($(CONFIG_AST2400), yes)
+UNSUPPORTED_FEATURES += CONFIG_AST2400=yes
+else
+override CONFIG_AST2400 = no
+endif
ifeq ($(CONFIG_SATASII), yes)
UNSUPPORTED_FEATURES += CONFIG_SATASII=yes
else
@@ -565,6 +575,9 @@ CONFIG_NIC3COM ?= yes
# Enable NVIDIA graphics cards. Note: write and erase do not work properly.
CONFIG_GFXNVIDIA ?= yes
+# Enable AST2400 BMC SoCs.
+CONFIG_AST2400 ?= yes
+
# Always enable SiI SATA controllers for now.
CONFIG_SATASII ?= yes
@@ -664,6 +677,7 @@ ifeq ($(CONFIG_ENABLE_LIBPCI_PROGRAMMERS), no)
override CONFIG_INTERNAL = no
override CONFIG_NIC3COM = no
override CONFIG_GFXNVIDIA = no
+override CONFIG_AST2400 = no
override CONFIG_SATASII = no
override CONFIG_ATAHPT = no
override CONFIG_ATAVIA = no
@@ -776,6 +790,12 @@ PROGRAMMER_OBJS += gfxnvidia.o
NEED_LIBPCI += CONFIG_GFXNVIDIA
endif
+ifeq ($(CONFIG_AST2400), yes)
+FEATURE_CFLAGS += -D'CONFIG_AST2400=1'
+PROGRAMMER_OBJS += ast2400.o
+NEED_LIBPCI += CONFIG_AST2400
+endif
+
ifeq ($(CONFIG_SATASII), yes)
FEATURE_CFLAGS += -D'CONFIG_SATASII=1'
PROGRAMMER_OBJS += satasii.o
new file mode 100644
@@ -0,0 +1,426 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2016 Raptor Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdlib.h>
+#include <string.h>
+#include "flash.h"
+#include "programmer.h"
+#include "hwaccess.h"
+
+#define PCI_VENDOR_ID_ASPEED 0x1a03
+
+#define ASPEED_MEMMAP_SIZE (128 * 1024)
+#define ASPEED_P2A_OFFSET 0x10000
+
+#define AST2400_SCU_APB_ADDR 0x1e6e2000
+#define AST2400_SCU_APB_BRIDGE_OFFSET (AST2400_SCU_APB_ADDR & 0xffff)
+#define AST2400_SCU_PROT_KEY 0x00
+#define AST2400_SCU_MISC_CTL 0x2c
+#define AST2400_SCU_HW_STRAP 0x70
+
+#define AST2400_SCU_PASSWORD 0x1688a8a8
+#define AST2400_SCU_BOOT_SRC_MASK 0x3
+#define AST2400_SCU_BOOT_SPI 0x2
+#define AST2400_SCU_BOOT_NONE 0x3
+
+#define AST2400_SMC_APB_ADDR 0x1e620000
+#define AST2400_SMC_FMC00 0x00
+#define AST2400_SMC_CE_CTL(N) (0x10 + (N * 4))
+#define AST2400_SMC_CE_SEG(N) (0x30 + (N * 4))
+
+#define AST2400_SMC_FLASH_MMIO_ADDR 0x20000000
+
+#define AST2400_SPI_APB_ADDR 0x1e630000
+#define AST2400_SPI_CFG 0x00
+#define AST2400_SPI_CTL 0x04
+
+#define AST2400_SPI_CFG_WRITE_EN 0x1
+#define AST2400_SPI_CMD_FAST_R_MODE 0x1
+#define AST2400_SPI_CMD_USER_MODE 0x3
+#define AST2400_SPI_CMD_MASK 0x3
+#define AST2400_SPI_STOP_CE_ACTIVE (0x1 << 2)
+#define AST2400_SPI_CPOL_1 (0x1 << 4)
+#define AST2400_SPI_LSB_FIRST_CTRL (0x1 << 5)
+#define AST2400_SPI_SPEED_MASK (0xf << 8)
+#define AST2400_SPI_IO_MODE_MASK (0x3 << 28)
+
+#define AST2400_SPI_FLASH_MMIO_ADDR 0x30000000
+
+#define AST2400_WDT_APB_ADDR 0x1e785000
+#define AST2400_WDT_APB_BRIDGE_OFFSET (AST2400_WDT_APB_ADDR & 0xffff)
+
+#define AST2400_WDT1_CTL 0x0c
+
+#define AST2400_WDT_RESET_MODE_MASK (0x3 << 5)
+#define AST2400_WDT_RESET_CPU_ONLY (0x2 << 5)
+
+uint8_t *aspeed_bar = 0;
+uint8_t aspeed_spi_bus = 0;
+uint8_t aspeed_halt_cpu = 0;
+uint8_t aspeed_resume_cpu = 0;
+uint8_t aspeed_tickle_fw = 0;
+uint32_t aspeed_flash_mmio_offset = 0;
+uint32_t aspeed_host_mode = 0;
+uint32_t original_wdt_conf = 0;
+
+const struct dev_entry bmc_aspeed[] = {
+ {PCI_VENDOR_ID_ASPEED, 0x2000, OK, "ASPEED", "AST2400" },
+
+ {0},
+};
+
+static int ast2400_spi_send_command(struct flashctx *flash,
+ unsigned int writecnt, unsigned int readcnt,
+ const unsigned char *writearr,
+ unsigned char *readarr);
+
+static const struct spi_master spi_master_ast2400 = {
+ .type = SPI_CONTROLLER_AST2400,
+ .max_data_read = 256,
+ .max_data_write = 256,
+ .command = ast2400_spi_send_command,
+ .multicommand = default_spi_send_multicommand,
+ .read = default_spi_read,
+ .write_256 = default_spi_write_256,
+ .write_aai = default_spi_write_aai,
+};
+
+static int ast2400_set_a2b_bridge_scu(void)
+{
+ pci_mmio_writel(0x0, aspeed_bar + 0xf000);
+ pci_mmio_writel(AST2400_SCU_APB_ADDR & 0xffff0000, aspeed_bar + 0xf004);
+ pci_mmio_writel(0x1, aspeed_bar + 0xf000);
+
+ return 0;
+}
+
+static int ast2400_set_a2b_bridge_wdt(void)
+{
+ pci_mmio_writel(0x0, aspeed_bar + 0xf000);
+ pci_mmio_writel(AST2400_WDT_APB_ADDR & 0xffff0000, aspeed_bar + 0xf004);
+ pci_mmio_writel(0x1, aspeed_bar + 0xf000);
+
+ return 0;
+}
+
+static int ast2400_set_a2b_bridge_smc(void)
+{
+ pci_mmio_writel(0x0, aspeed_bar + 0xf000);
+ pci_mmio_writel(AST2400_SMC_APB_ADDR, aspeed_bar + 0xf004);
+ pci_mmio_writel(0x1, aspeed_bar + 0xf000);
+
+ return 0;
+}
+
+static int ast2400_set_a2b_bridge_spi(void)
+{
+ pci_mmio_writel(0x0, aspeed_bar + 0xf000);
+ pci_mmio_writel(AST2400_SPI_APB_ADDR, aspeed_bar + 0xf004);
+ pci_mmio_writel(0x1, aspeed_bar + 0xf000);
+
+ return 0;
+}
+
+static int ast2400_set_a2b_bridge_smc_flash(void)
+{
+ pci_mmio_writel(0x0, aspeed_bar + 0xf000);
+ pci_mmio_writel(AST2400_SMC_FLASH_MMIO_ADDR + aspeed_flash_mmio_offset, aspeed_bar + 0xf004);
+ pci_mmio_writel(0x1, aspeed_bar + 0xf000);
+
+ return 0;
+}
+
+static int ast2400_set_a2b_bridge_spi_flash(void)
+{
+ pci_mmio_writel(0x0, aspeed_bar + 0xf000);
+ pci_mmio_writel(AST2400_SPI_FLASH_MMIO_ADDR, aspeed_bar + 0xf004);
+ pci_mmio_writel(0x1, aspeed_bar + 0xf000);
+
+ return 0;
+}
+
+static int ast2400_disable_cpu(void) {
+ uint32_t dword;
+
+ if (aspeed_halt_cpu) {
+ dword = pci_mmio_readl(aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SCU_APB_BRIDGE_OFFSET + AST2400_SCU_HW_STRAP);
+ if (((dword & AST2400_SCU_BOOT_SRC_MASK) != AST2400_SCU_BOOT_SPI)
+ && ((dword & AST2400_SCU_BOOT_SRC_MASK) != AST2400_SCU_BOOT_NONE)) { /* NONE permitted to allow for BMC recovery after Ctrl+C or crash */
+ msg_perr("CPU halt requested but CPU firmware source is not SPI.\n");
+ pci_mmio_writel(0x0, aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SCU_APB_BRIDGE_OFFSET + AST2400_SCU_PROT_KEY);
+ aspeed_halt_cpu = 0;
+ return 1;
+ }
+
+ /* Disable WDT from issuing full SoC reset
+ * Without this, OpenPOWER systems will crash when the GPIO blocks are reset on WDT timeout
+ */
+ msg_pinfo("Configuring P2A bridge for WDT access\n");
+ ast2400_set_a2b_bridge_wdt();
+ original_wdt_conf = pci_mmio_readl(aspeed_bar + ASPEED_P2A_OFFSET + AST2400_WDT_APB_BRIDGE_OFFSET + AST2400_WDT1_CTL);
+ pci_mmio_writel((original_wdt_conf & ~AST2400_WDT_RESET_MODE_MASK) | AST2400_WDT_RESET_CPU_ONLY, aspeed_bar + ASPEED_P2A_OFFSET + AST2400_WDT_APB_BRIDGE_OFFSET + AST2400_WDT1_CTL);
+
+ /* Disable CPU */
+ ast2400_set_a2b_bridge_scu();
+ pci_mmio_writel((dword & ~AST2400_SCU_BOOT_SRC_MASK) | AST2400_SCU_BOOT_NONE, aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SCU_APB_BRIDGE_OFFSET + AST2400_SCU_HW_STRAP);
+ }
+
+ return 0;
+}
+
+static int ast2400_enable_cpu(void) {
+ uint32_t dword;
+
+ if (aspeed_halt_cpu && aspeed_resume_cpu) {
+ /* Re-enable CPU */
+ ast2400_set_a2b_bridge_scu();
+ dword = pci_mmio_readl(aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SCU_APB_BRIDGE_OFFSET + AST2400_SCU_HW_STRAP);
+ pci_mmio_writel((dword & ~AST2400_SCU_BOOT_SRC_MASK) | AST2400_SCU_BOOT_SPI, aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SCU_APB_BRIDGE_OFFSET + AST2400_SCU_HW_STRAP);
+
+ /* Reset WDT configuration */
+ ast2400_set_a2b_bridge_wdt();
+ pci_mmio_writel((original_wdt_conf & ~AST2400_WDT_RESET_MODE_MASK) | AST2400_WDT_RESET_CPU_ONLY, aspeed_bar + ASPEED_P2A_OFFSET + AST2400_WDT_APB_BRIDGE_OFFSET + AST2400_WDT1_CTL);
+ }
+
+ return 0;
+}
+
+static int ast2400_shutdown(void *data) {
+ /* Reactivate CPU if previously deactivated */
+ ast2400_enable_cpu();
+
+ /* Disable backdoor APB access */
+ pci_mmio_writel(0x0, aspeed_bar + 0xf000);
+
+ return 0;
+}
+
+int ast2400_init(void)
+{
+ struct pci_dev *dev = NULL;
+ uint32_t dword;
+ uint8_t divisor;
+
+ char *arg;
+
+ aspeed_spi_bus = 0;
+ arg = extract_programmer_param("spibus");
+ if (arg) {
+ if (!strcmp(arg,"host"))
+ aspeed_host_mode = 1;
+ else
+ aspeed_spi_bus = strtol(arg, NULL, 0);
+ }
+ free(arg);
+
+ aspeed_halt_cpu = 0;
+ arg = extract_programmer_param("cpu");
+ if (arg && !strcmp(arg,"pause")) {
+ aspeed_halt_cpu = 1;
+ aspeed_resume_cpu = 1;
+ }
+ if (arg && !strcmp(arg,"halt")) {
+ aspeed_halt_cpu = 1;
+ aspeed_resume_cpu = 0;
+ }
+ arg = extract_programmer_param("tickle");
+ if (arg && !strcmp(arg,"true"))
+ aspeed_tickle_fw = 1;
+ free(arg);
+
+ if ((aspeed_host_mode == 0) && ((aspeed_spi_bus < 0) || (aspeed_spi_bus > 4))) {
+ msg_perr("SPI bus number out of range! Valid values are 0 - 4.\n");
+ return 1;
+ }
+
+ if (rget_io_perms())
+ return 1;
+
+ dev = pcidev_init(bmc_aspeed, PCI_BASE_ADDRESS_1);
+ if (!dev)
+ return 1;
+
+ uintptr_t io_base_addr = pcidev_readbar(dev, PCI_BASE_ADDRESS_1);
+ if (!io_base_addr)
+ return 1;
+
+ msg_pinfo("Detected ASPEED MMIO base address: 0x%p.\n", (void*)io_base_addr);
+
+ aspeed_bar = rphysmap("ASPEED", io_base_addr, ASPEED_MEMMAP_SIZE);
+ if (aspeed_bar == ERROR_PTR)
+ return 1;
+
+ if (register_shutdown(ast2400_shutdown, dev))
+ return 1;
+
+ io_base_addr += ASPEED_P2A_OFFSET;
+ msg_pinfo("ASPEED P2A base address: 0x%p.\n", (void*)io_base_addr);
+
+ msg_pinfo("Configuring P2A bridge for SCU access\n");
+ ast2400_set_a2b_bridge_scu();
+ pci_mmio_writel(AST2400_SCU_PASSWORD, aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SCU_APB_BRIDGE_OFFSET + AST2400_SCU_PROT_KEY);
+
+ dword = pci_mmio_readl(aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SCU_APB_BRIDGE_OFFSET + AST2400_SCU_MISC_CTL);
+ pci_mmio_writel(dword & ~((0x1 << 24) | (0x2 << 22)), aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SCU_APB_BRIDGE_OFFSET + AST2400_SCU_MISC_CTL);
+
+ /* Halt CPU if requested */
+ if (ast2400_disable_cpu())
+ return 1;
+
+ msg_pinfo("Configuring P2A bridge for SMC access\n");
+ ast2400_set_a2b_bridge_smc();
+
+ if (aspeed_host_mode) {
+ msg_pinfo("Configuring P2A bridge for SPI access\n");
+ ast2400_set_a2b_bridge_spi();
+
+ divisor = 0; /* Slowest speed for now */
+
+ dword = pci_mmio_readl(aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SPI_CTL);
+ dword &= ~AST2400_SPI_SPEED_MASK;
+ dword |= (divisor << 8);
+ dword &= ~AST2400_SPI_CPOL_1;
+ dword &= ~AST2400_SPI_LSB_FIRST_CTRL; /* MSB first */
+ dword &= ~AST2400_SPI_IO_MODE_MASK; /* Single bit I/O mode */
+ pci_mmio_writel(dword, aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SPI_CTL);
+ }
+ else {
+ dword = pci_mmio_readl(aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SMC_FMC00);
+ if (((dword >> (aspeed_spi_bus * 2)) & 0x3) != 0x2) {
+ msg_perr("CE%01x Flash type is not SPI!\n", aspeed_spi_bus);
+ return 1;
+ }
+
+ msg_pinfo("Enabling CE%01x write\n", aspeed_spi_bus);
+ dword = pci_mmio_readl(aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SMC_FMC00);
+ pci_mmio_writel(dword | (0x1 << (16 + aspeed_spi_bus)), aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SMC_FMC00);
+
+ dword = pci_mmio_readl(aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SMC_CE_SEG(aspeed_spi_bus));
+ aspeed_flash_mmio_offset = ((dword >> 16) & 0x3f) * 0x800000;
+ msg_pinfo("Using CE%01x offset %08x\n", aspeed_spi_bus, aspeed_flash_mmio_offset);
+ }
+
+ register_spi_master(&spi_master_ast2400);
+
+ return 0;
+}
+
+static void ast2400_spi_xfer_data(struct flashctx *flash,
+ unsigned int writecnt, unsigned int readcnt,
+ const unsigned char *writearr,
+ unsigned char *readarr)
+{
+ int i;
+ uint32_t dword;
+
+ for (i = 0; i < writecnt; i++)
+ msg_pspew("[%02x]", writearr[i]);
+ msg_pspew("\n");
+
+ for (i = 0; i < writecnt; i=i+4) {
+ if ((writecnt - i) < 4)
+ break;
+ dword = writearr[i];
+ dword |= writearr[i + 1] << 8;
+ dword |= writearr[i + 2] << 16;
+ dword |= writearr[i + 3] << 24;
+ pci_mmio_writel(dword, aspeed_bar + ASPEED_P2A_OFFSET);
+ }
+ for (; i < writecnt; i++)
+ pci_mmio_writeb(writearr[i], aspeed_bar + ASPEED_P2A_OFFSET);
+ programmer_delay(1);
+ for (i = 0; i < readcnt;) {
+ dword = pci_mmio_readl(aspeed_bar + ASPEED_P2A_OFFSET);
+ if (i < readcnt)
+ readarr[i] = dword & 0xff;
+ i++;
+ if (i < readcnt)
+ readarr[i] = (dword >> 8) & 0xff;
+ i++;
+ if (i < readcnt)
+ readarr[i] = (dword >> 16) & 0xff;
+ i++;
+ if (i < readcnt)
+ readarr[i] = (dword >> 24) & 0xff;
+ i++;
+ }
+
+ for (i = 0; i < readcnt; i++)
+ msg_pspew("[%02x]", readarr[i]);
+ msg_pspew("\n");
+}
+
+/* Returns 0 upon success, a negative number upon errors. */
+static int ast2400_spi_send_command(struct flashctx *flash,
+ unsigned int writecnt, unsigned int readcnt,
+ const unsigned char *writearr,
+ unsigned char *readarr)
+{
+ uint32_t dword;
+
+ msg_pspew("%s, cmd=0x%02x, writecnt=%d, readcnt=%d\n", __func__, *writearr, writecnt, readcnt);
+
+ if (aspeed_host_mode) {
+ /* Set up user command mode */
+ ast2400_set_a2b_bridge_spi();
+ dword = pci_mmio_readl(aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SPI_CFG);
+ pci_mmio_writel(dword | AST2400_SPI_CFG_WRITE_EN, aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SPI_CFG);
+ dword = pci_mmio_readl(aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SPI_CTL);
+ pci_mmio_writel(dword | AST2400_SPI_CMD_USER_MODE, aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SPI_CTL);
+
+ /* Transfer data */
+ ast2400_set_a2b_bridge_spi_flash();
+ ast2400_spi_xfer_data(flash, writecnt, readcnt, writearr, readarr);
+
+ /* Tear down user command mode */
+ ast2400_set_a2b_bridge_spi();
+ dword = pci_mmio_readl(aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SPI_CTL);
+ pci_mmio_writel((dword & ~AST2400_SPI_CMD_MASK) | AST2400_SPI_CMD_FAST_R_MODE, aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SPI_CTL);
+ dword = pci_mmio_readl(aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SPI_CFG);
+ pci_mmio_writel(dword & ~AST2400_SPI_CFG_WRITE_EN, aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SPI_CFG);
+ }
+ else {
+ /* Set up user command mode */
+ ast2400_set_a2b_bridge_smc();
+ dword = pci_mmio_readl(aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SMC_CE_CTL(aspeed_spi_bus));
+ pci_mmio_writel(dword | AST2400_SPI_CMD_USER_MODE, aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SMC_CE_CTL(aspeed_spi_bus));
+ dword = pci_mmio_readl(aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SMC_CE_CTL(aspeed_spi_bus));
+ pci_mmio_writel(dword & ~AST2400_SPI_STOP_CE_ACTIVE, aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SMC_CE_CTL(aspeed_spi_bus));
+
+ /* Transfer data */
+ ast2400_set_a2b_bridge_smc_flash();
+ ast2400_spi_xfer_data(flash, writecnt, readcnt, writearr, readarr);
+
+ /* Tear down user command mode */
+ ast2400_set_a2b_bridge_smc();
+ dword = pci_mmio_readl(aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SMC_CE_CTL(aspeed_spi_bus));
+ pci_mmio_writel(dword | AST2400_SPI_STOP_CE_ACTIVE, aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SMC_CE_CTL(aspeed_spi_bus));
+ dword = pci_mmio_readl(aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SMC_CE_CTL(aspeed_spi_bus));
+ pci_mmio_writel((dword & ~AST2400_SPI_CMD_MASK) | AST2400_SPI_CMD_FAST_R_MODE, aspeed_bar + ASPEED_P2A_OFFSET + AST2400_SMC_CE_CTL(aspeed_spi_bus));
+ }
+
+ if (aspeed_tickle_fw) {
+ ast2400_enable_cpu();
+ programmer_delay(100);
+ ast2400_disable_cpu();
+ }
+
+ return 0;
+}
@@ -134,6 +134,18 @@ const struct programmer_entry programmer_table[] = {
},
#endif
+#if CONFIG_AST2400 == 1
+ {
+ .name = "ast2400",
+ .type = PCI,
+ .devs.dev = bmc_aspeed,
+ .init = ast2400_init,
+ .map_flash_region = fallback_map,
+ .unmap_flash_region = fallback_unmap,
+ .delay = internal_delay,
+ },
+#endif
+
#if CONFIG_DRKAISER == 1
{
.name = "drkaiser",
@@ -45,6 +45,9 @@ enum programmer {
#if CONFIG_GFXNVIDIA == 1
PROGRAMMER_GFXNVIDIA,
#endif
+#if CONFIG_AST2400 == 1
+ PROGRAMMER_AST2400,
+#endif
#if CONFIG_DRKAISER == 1
PROGRAMMER_DRKAISER,
#endif
@@ -399,6 +402,12 @@ int gfxnvidia_init(void);
extern const struct dev_entry gfx_nvidia[];
#endif
+/* ast2400.c */
+#if CONFIG_AST2400 == 1
+int ast2400_init(void);
+extern const struct dev_entry bmc_aspeed[];
+#endif
+
/* drkaiser.c */
#if CONFIG_DRKAISER == 1
int drkaiser_init(void);
@@ -600,6 +609,10 @@ enum spi_controller {
#if CONFIG_CH341A_SPI == 1
SPI_CONTROLLER_CH341A_SPI,
#endif
+
+#if CONFIG_AST2400 == 1
+ SPI_CONTROLLER_AST2400,
+#endif
};
#define MAX_DATA_UNSPECIFIED 0