@@ -8484,6 +8484,46 @@ const struct flashchip flashchips[] = {
.voltage = {1650, 2000},
},
+ {
+ .vendor = "Macronix",
+ .name = "MX25U51245G",
+ .bustype = BUS_SPI,
+ .manufacture_id = MACRONIX_ID,
+ .model_id = MACRONIX_MX25U51245G,
+ .total_size = 65536,
+ .page_size = 256,
+ /* OTP: 512B total; enter 0xB1, exit 0xC1 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 16384} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 2048} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 1024} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {64 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {64 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ /* TODO: security register */
+ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
+ .unlock = spi_disable_blockprotect_bp3_srwd,
+ .write = spi_chip_write_256, /* Multi I/O supported */
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
+ .voltage = {1650, 2000},
+ },
+
{
.vendor = "Macronix",
.name = "MX25L6495F",
@@ -489,6 +489,7 @@
#define MACRONIX_MX25U6435E 0x2537 /* Same as MX25U6435F */
#define MACRONIX_MX25U12835E 0x2538 /* Same as MX25U12835F */
#define MACRONIX_MX25U25635F 0x2539
+#define MACRONIX_MX25U51245G 0x253a
#define MACRONIX_MX25L3235D 0x5E16 /* MX25L3225D/MX25L3235D/MX25L3237D */
#define MACRONIX_MX25L6495F 0x9517
Copy 'n paste support for Macronix MX25U51245G. I don't pretend to know a whole lot about SPI FLASH so its mosty copied from other MX25U devices. Currently probe works OK and I can read the first 4MB of FLASH (the remain 60MB is unprogrammed) but its not practical to read the whole chip but with the bit banger I'm using it would take >3 days. What testing is needed? For example is setting up a layout to read/write the first and last megabytes of the flash sufficient to replace TEST_UNTESTED? Change-Id: I2117fc205006088967f3d97644375d10db1791f1 Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> --- flashchips.c | 40 ++++++++++++++++++++++++++++++++++++++++ flashchips.h | 1 + 2 files changed, 41 insertions(+)