diff mbox

[6/6] 4BA: Progress visualization for long read, writes and erases

Message ID 1465662544-5730-7-git-send-email-clg@kaod.org
State New
Headers show

Commit Message

Cédric Le Goater June 11, 2016, 4:29 p.m. UTC
From: Boris Baykov <dev@borisbaykov.com>

I've added progress visualization for read, erase and write operations.
It's turned out that seeing progress is essential for reading and
especially writing 32 MB of data via SPI. The operation can take more
then 10 minutes on 15 MHz frequency of SPI. So, it's good to see its
progress. I've added percents and slightly modified cli_output.c to
send percents to screen only but not to logfile.

Patched files
-------------
cli_output.c
+ print() patched to skip strings which are starting from '\b'
  to prevent writing progress percents to logfile

flash.h
+ added some definitions for progress visialization

flashrom.c
+ added progress visualization for erase/write (essensial for 32MB+ chips)

spi25.c
+ added progress visualization for read operation (essensial for 32MB+ chips)

Signed-off-by: Boris Baykov <dev@borisbaykov.com>, Russia, Jan 2014
[clg: ported from
      https://www.flashrom.org/pipermail/flashrom/2015-January/013203.html ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 cli_output.c |  3 ++-
 flash.h      |  5 +++++
 flashrom.c   | 23 +++++++++++++++++++++++
 spi25.c      | 22 ++++++++++++++++++++++
 4 files changed, 52 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/cli_output.c b/cli_output.c
index feafbd2017b1..cb82fa1a64f6 100644
--- a/cli_output.c
+++ b/cli_output.c
@@ -90,7 +90,8 @@  int print(enum msglevel level, const char *fmt, ...)
 			fflush(output_type);
 	}
 #ifndef STANDALONE
-	if ((level <= verbose_logfile) && logfile) {
+	/* skip of msgs starting from '\b' added to skip progress percents */
+	if ((level <= verbose_logfile) && logfile && (!fmt || fmt[0] != '\b')) {
 		va_start(ap, fmt);
 		ret = vfprintf(logfile, fmt, ap);
 		va_end(ap);
diff --git a/flash.h b/flash.h
index 7f79387a9251..0b72439f5ec9 100644
--- a/flash.h
+++ b/flash.h
@@ -360,6 +360,11 @@  __attribute__((format(printf, 2, 3)));
 #define msg_pspew(...)	print(MSG_SPEW, __VA_ARGS__)	/* programmer debug spew  */
 #define msg_cspew(...)	print(MSG_SPEW, __VA_ARGS__)	/* chip debug spew  */
 
+/* Read progress will be shown for reads more than 256KB */
+#define MIN_LENGTH_TO_SHOW_READ_PROGRESS 256 * 1024
+/* Read progress will be shown for erases and writes more than 64KB */
+#define MIN_LENGTH_TO_SHOW_ERASE_AND_WRITE_PROGRESS 64 * 1024
+
 /* layout.c */
 int register_include_arg(char *name);
 int process_include_args(void);
diff --git a/flashrom.c b/flashrom.c
index 6a6f5b6f6af8..28b177b0199b 100644
--- a/flashrom.c
+++ b/flashrom.c
@@ -1527,6 +1527,17 @@  static int walk_eraseregions(struct flashctx *flash, int erasefunction,
 	unsigned int start = 0;
 	unsigned int len;
 	struct block_eraser eraser = flash->chip->block_erasers[erasefunction];
+	int show_progress = 0;
+	unsigned int percent_last, percent_current;
+	unsigned long size = flash->chip->total_size * 1024;
+
+	/* progress visualizaion init */
+	if(size >= MIN_LENGTH_TO_SHOW_ERASE_AND_WRITE_PROGRESS) {
+		msg_cinfo(" "); /* only this space will go to logfile but all strings with \b wont. */
+		msg_cinfo("\b 0%%");
+		percent_last = percent_current = 0;
+		show_progress = 1; /* enable progress visualizaion */
+	}
 
 	for (i = 0; i < NUM_ERASEREGIONS; i++) {
 		/* count==0 for all automatically initialized array
@@ -1544,8 +1555,20 @@  static int walk_eraseregions(struct flashctx *flash, int erasefunction,
 				return 1;
 			}
 			start += len;
+
+			if(show_progress) {
+				percent_current = (unsigned int) ((unsigned long long)start * 100 / size);
+				if(percent_current != percent_last) {
+					msg_cinfo("\b\b\b%2d%%", percent_current);
+					percent_last = percent_current;
+				}
+			}
 		}
 	}
+
+	if(show_progress)
+		msg_cinfo("\b\b\b\b"); /* remove progress percents from the screen */
+
 	msg_cdbg("\n");
 	return 0;
 }
diff --git a/spi25.c b/spi25.c
index b38c7444e873..93c4befacdc1 100644
--- a/spi25.c
+++ b/spi25.c
@@ -949,6 +949,16 @@  int spi_read_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start,
 	int rc = 0;
 	unsigned int i, j, starthere, lenhere, toread;
 	unsigned int page_size = flash->chip->page_size;
+	int show_progress = 0;
+	unsigned int percent_last, percent_current;
+
+	/* progress visualizaion init */
+	if(len >= MIN_LENGTH_TO_SHOW_READ_PROGRESS) {
+		msg_cinfo(" "); /* only this space will go to logfile but all strings with \b wont. */
+		msg_cinfo("\b 0%%");
+		percent_last = percent_current = 0;
+		show_progress = 1; /* enable progress visualizaion */
+	}
 
 	/* Warning: This loop has a very unusual condition and body.
 	 * The loop needs to go through each page with at least one affected
@@ -976,8 +986,20 @@  int spi_read_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start,
 		}
 		if (rc)
 			break;
+
+		if(show_progress) {
+			percent_current = (unsigned int) ((unsigned long long)(starthere +
+									lenhere - start) * 100 / len);
+			if(percent_current != percent_last) {
+				msg_cinfo("\b\b\b%2d%%", percent_current);
+				percent_last = percent_current;
+			}
+		}
 	}
 
+	if(show_progress && !rc)
+		msg_cinfo("\b\b\b\b"); /* remove progress percents from the screen */
+
 	return rc;
 }