From patchwork Thu Jun 27 15:31:45 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Maxime Ripard X-Patchwork-Id: 1123451 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=bootlin.com Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 45ZP5s5qZ7z9s3l for ; Fri, 28 Jun 2019 01:32:17 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726596AbfF0PcR (ORCPT ); Thu, 27 Jun 2019 11:32:17 -0400 Received: from relay1-d.mail.gandi.net ([217.70.183.193]:58637 "EHLO relay1-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726187AbfF0PcR (ORCPT ); Thu, 27 Jun 2019 11:32:17 -0400 X-Originating-IP: 86.250.200.211 Received: from localhost (lfbn-1-17395-211.w86-250.abo.wanadoo.fr [86.250.200.211]) (Authenticated sender: maxime.ripard@bootlin.com) by relay1-d.mail.gandi.net (Postfix) with ESMTPSA id 9B895240004; Thu, 27 Jun 2019 15:32:09 +0000 (UTC) From: Maxime Ripard To: Mark Rutland , Rob Herring , Frank Rowand , "David S . Miller" , Chen-Yu Tsai , Maxime Ripard Cc: Maxime Coquelin , Alexandre Torgue , netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, Maxime Chevallier , =?utf-8?q?Antoine_T=C3=A9nart?= , Andrew Lunn , Florian Fainelli , Heiner Kallweit Subject: [PATCH v4 03/13] dt-bindings: net: Add a YAML schemas for the generic MDIO options Date: Thu, 27 Jun 2019 17:31:45 +0200 Message-Id: X-Mailer: git-send-email 2.21.0 In-Reply-To: References: MIME-Version: 1.0 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org The MDIO buses have a number of available device tree properties that can be used in their device tree node. Add a YAML schemas for those. Suggested-by: Andrew Lunn Signed-off-by: Maxime Ripard Reviewed-by: Andrew Lunn Reviewed-by: Rob Herring --- Documentation/devicetree/bindings/net/mdio.txt | 38 +------------- Documentation/devicetree/bindings/net/mdio.yaml | 51 ++++++++++++++++++- 2 files changed, 52 insertions(+), 37 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/mdio.yaml diff --git a/Documentation/devicetree/bindings/net/mdio.txt b/Documentation/devicetree/bindings/net/mdio.txt index e3e1603f256c..cf8a0105488e 100644 --- a/Documentation/devicetree/bindings/net/mdio.txt +++ b/Documentation/devicetree/bindings/net/mdio.txt @@ -1,37 +1 @@ -Common MDIO bus properties. - -These are generic properties that can apply to any MDIO bus. - -Optional properties: -- reset-gpios: One GPIO that control the RESET lines of all PHYs on that MDIO - bus. -- reset-delay-us: RESET pulse width in microseconds. - -A list of child nodes, one per device on the bus is expected. These -should follow the generic phy.txt, or a device specific binding document. - -The 'reset-delay-us' indicates the RESET signal pulse width in microseconds and -applies to all PHY devices. It must therefore be appropriately determined based -on all PHY requirements (maximum value of all per-PHY RESET pulse widths). - -Example : -This example shows these optional properties, plus other properties -required for the TI Davinci MDIO driver. - - davinci_mdio: ethernet@5c030000 { - compatible = "ti,davinci_mdio"; - reg = <0x5c030000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - - reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - reset-delay-us = <2>; - - ethphy0: ethernet-phy@1 { - reg = <1>; - }; - - ethphy1: ethernet-phy@3 { - reg = <3>; - }; - }; +This file has moved to mdio.yaml. diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml new file mode 100644 index 000000000000..b8fa8251c4bc --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MDIO Bus Generic Binding + +maintainers: + - Andrew Lunn + - Florian Fainelli + - Heiner Kallweit + +description: + These are generic properties that can apply to any MDIO bus. Any + MDIO bus must have a list of child nodes, one per device on the + bus. These should follow the generic ethernet-phy.yaml document, or + a device specific binding document. + +properties: + reset-gpios: + maxItems: 1 + description: + The phandle and specifier for the GPIO that controls the RESET + lines of all PHYs on that MDIO bus. + + reset-delay-us: + description: + RESET pulse width in microseconds. It applies to all PHY devices + and must therefore be appropriately determined based on all PHY + requirements (maximum value of all per-PHY RESET pulse widths). + +examples: + - | + davinci_mdio: mdio@5c030000 { + compatible = "ti,davinci_mdio"; + reg = <0x5c030000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio2 5 1>; + reset-delay-us = <2>; + + ethphy0: ethernet-phy@1 { + reg = <1>; + }; + + ethphy1: ethernet-phy@3 { + reg = <3>; + }; + };