| Message ID | b0dfcba4-7319-4687-a455-bfcddf61b7d1@BN1AFFO11FD028.protection.gbl |
|---|---|
| State | Superseded, archived |
| Headers | show |
Ping Thanks, Sundeep.B.S. On Tue, Jun 10, 2014 at 5:34 PM, <subbaraya.sundeep.bhatta@xilinx.com> wrote: > From: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com> > > Add devicetree bindings for Xilinx axi udc driver. > > Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com> > --- > Changes for v3: > - None > Changes for v2: > - replaced xlnx,include-dma with xlnx,has-builtin-dma > > .../devicetree/bindings/usb/udc-xilinx.txt | 20 ++++++++++++++++++++ > 1 files changed, 20 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/usb/udc-xilinx.txt > > diff --git a/Documentation/devicetree/bindings/usb/udc-xilinx.txt b/Documentation/devicetree/bindings/usb/udc-xilinx.txt > new file mode 100644 > index 0000000..7c24fac > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/udc-xilinx.txt > @@ -0,0 +1,20 @@ > +Xilinx AXI USB2 device controller > + > +Required properties: > +- compatible : Should be "xlnx,axi-usb2-device-4.00.a" > +- reg : Physical base address and size of the Axi USB2 > + device registers map. > +- interrupts : Property with a value describing the interrupt > + number. > +- interrupt-parent : Must be core interrupt controller > +- xlnx,include-dma : if DMA is included > + > +Example: > + axi-usb2-device@42e00000 { > + compatible = "xlnx,axi-usb2-device-4.00.a"; > + interrupt-parent = <0x1>; > + interrupts = <0x0 0x39 0x1>; > + reg = <0x42e00000 0x10000>; > + xlnx,has-builtin-dma; > + }; > + > -- > 1.7.4 > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Jun 24, 2014 at 07:44:10AM +0100, sundeep subbaraya wrote: > Ping > > Thanks, > Sundeep.B.S. > > On Tue, Jun 10, 2014 at 5:34 PM, <subbaraya.sundeep.bhatta@xilinx.com> wrote: > > From: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com> > > > > Add devicetree bindings for Xilinx axi udc driver. > > > > Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com> > > --- > > Changes for v3: > > - None > > Changes for v2: > > - replaced xlnx,include-dma with xlnx,has-builtin-dma > > > > .../devicetree/bindings/usb/udc-xilinx.txt | 20 ++++++++++++++++++++ > > 1 files changed, 20 insertions(+), 0 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/usb/udc-xilinx.txt > > > > diff --git a/Documentation/devicetree/bindings/usb/udc-xilinx.txt b/Documentation/devicetree/bindings/usb/udc-xilinx.txt > > new file mode 100644 > > index 0000000..7c24fac > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/usb/udc-xilinx.txt > > @@ -0,0 +1,20 @@ > > +Xilinx AXI USB2 device controller > > + > > +Required properties: > > +- compatible : Should be "xlnx,axi-usb2-device-4.00.a" That's an interesting name. What's the product name? Is the a manual? > > +- reg : Physical base address and size of the Axi USB2 > > + device registers map. > > +- interrupts : Property with a value describing the interrupt > > + number. Describe what this logically is. Everyone knows that this is a property with a value, and everyone knows that an interrupts property describes interrupts. The ket point is _which_ interrupts this describes. > > +- interrupt-parent : Must be core interrupt controller This isn't strictly necessary anyway. > > +- xlnx,include-dma : if DMA is included You appear to have forgotten to fix this name, judging by the changelog and example. > > + > > +Example: > > + axi-usb2-device@42e00000 { > > + compatible = "xlnx,axi-usb2-device-4.00.a"; > > + interrupt-parent = <0x1>; Huh? Who writes a raw phandle value? > > + interrupts = <0x0 0x39 0x1>; > > + reg = <0x42e00000 0x10000>; > > + xlnx,has-builtin-dma; As mentioned above, this conflicts with the binding documentation. Please ensure the example is aligned with the documentation. Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Fri, Jul 4, 2014 at 10:10 PM, Mark Rutland <mark.rutland@arm.com> wrote: > On Tue, Jun 24, 2014 at 07:44:10AM +0100, sundeep subbaraya wrote: >> Ping >> >> Thanks, >> Sundeep.B.S. >> >> On Tue, Jun 10, 2014 at 5:34 PM, <subbaraya.sundeep.bhatta@xilinx.com> wrote: >> > From: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com> >> > >> > Add devicetree bindings for Xilinx axi udc driver. >> > >> > Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com> >> > --- >> > Changes for v3: >> > - None >> > Changes for v2: >> > - replaced xlnx,include-dma with xlnx,has-builtin-dma >> > >> > .../devicetree/bindings/usb/udc-xilinx.txt | 20 ++++++++++++++++++++ >> > 1 files changed, 20 insertions(+), 0 deletions(-) >> > create mode 100644 Documentation/devicetree/bindings/usb/udc-xilinx.txt >> > >> > diff --git a/Documentation/devicetree/bindings/usb/udc-xilinx.txt b/Documentation/devicetree/bindings/usb/udc-xilinx.txt >> > new file mode 100644 >> > index 0000000..7c24fac >> > --- /dev/null >> > +++ b/Documentation/devicetree/bindings/usb/udc-xilinx.txt >> > @@ -0,0 +1,20 @@ >> > +Xilinx AXI USB2 device controller >> > + >> > +Required properties: >> > +- compatible : Should be "xlnx,axi-usb2-device-4.00.a" > > That's an interesting name. What's the product name? Is the a manual? Here is the manual for the IP : http://www.xilinx.com/support/documentation/ip_documentation/axi_usb2_device/v5_0/pg137-axi-usb2-device.pdf This driver works with PLB IP version that's why maybe make more sense to use skip axi from compatible string and use just xlnx,usb2-device-4.00.a. > >> > +- reg : Physical base address and size of the Axi USB2 >> > + device registers map. >> > +- interrupts : Property with a value describing the interrupt >> > + number. > > Describe what this logically is. Everyone knows that this is a property > with a value, and everyone knows that an interrupts property describes > interrupts. > > The ket point is _which_ interrupts this describes. Ok > >> > +- interrupt-parent : Must be core interrupt controller > > This isn't strictly necessary anyway. > >> > +- xlnx,include-dma : if DMA is included > > You appear to have forgotten to fix this name, judging by the changelog > and example. > >> > + >> > +Example: >> > + axi-usb2-device@42e00000 { >> > + compatible = "xlnx,axi-usb2-device-4.00.a"; >> > + interrupt-parent = <0x1>; > > Huh? Who writes a raw phandle value? > >> > + interrupts = <0x0 0x39 0x1>; >> > + reg = <0x42e00000 0x10000>; >> > + xlnx,has-builtin-dma; > > As mentioned above, this conflicts with the binding documentation. > Please ensure the example is aligned with the documentation. Thank you for pointing this i sent an old one, will fix this. Sundeep.B.S. > > Thanks, > Mark. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/usb/udc-xilinx.txt b/Documentation/devicetree/bindings/usb/udc-xilinx.txt new file mode 100644 index 0000000..7c24fac --- /dev/null +++ b/Documentation/devicetree/bindings/usb/udc-xilinx.txt @@ -0,0 +1,20 @@ +Xilinx AXI USB2 device controller + +Required properties: +- compatible : Should be "xlnx,axi-usb2-device-4.00.a" +- reg : Physical base address and size of the Axi USB2 + device registers map. +- interrupts : Property with a value describing the interrupt + number. +- interrupt-parent : Must be core interrupt controller +- xlnx,include-dma : if DMA is included + +Example: + axi-usb2-device@42e00000 { + compatible = "xlnx,axi-usb2-device-4.00.a"; + interrupt-parent = <0x1>; + interrupts = <0x0 0x39 0x1>; + reg = <0x42e00000 0x10000>; + xlnx,has-builtin-dma; + }; +