diff mbox series

dt-bindings: timer: Remove binding for energymicro,efm32-timer.txt

Message ID 571fc4b2e6d41c61b7f4445601a79bb50aace2e7.1628245879.git.michal.simek@xilinx.com
State Accepted, archived
Headers show
Series dt-bindings: timer: Remove binding for energymicro,efm32-timer.txt | expand

Checks

Context Check Description
robh/checkpatch warning total: 0 errors, 2 warnings, 0 lines checked

Commit Message

Michal Simek Aug. 6, 2021, 10:31 a.m. UTC
The driver has been removed by commit 523d83ef0979
("clocksource/drivers/efm32: Drop unused timer code") that's why binding
doc shouldn't be also valid anymore.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 .../timer/energymicro,efm32-timer.txt         | 23 -------------------
 1 file changed, 23 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/timer/energymicro,efm32-timer.txt

Comments

Rob Herring Aug. 13, 2021, 8:13 p.m. UTC | #1
On Fri, 06 Aug 2021 12:31:22 +0200, Michal Simek wrote:
> The driver has been removed by commit 523d83ef0979
> ("clocksource/drivers/efm32: Drop unused timer code") that's why binding
> doc shouldn't be also valid anymore.
> 
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
> 
>  .../timer/energymicro,efm32-timer.txt         | 23 -------------------
>  1 file changed, 23 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/timer/energymicro,efm32-timer.txt
> 

Applied, thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/timer/energymicro,efm32-timer.txt b/Documentation/devicetree/bindings/timer/energymicro,efm32-timer.txt
deleted file mode 100644
index e502c11b2211..000000000000
--- a/Documentation/devicetree/bindings/timer/energymicro,efm32-timer.txt
+++ /dev/null
@@ -1,23 +0,0 @@ 
-* EFM32 timer hardware
-
-The efm32 Giant Gecko SoCs come with four 16 bit timers. Two counters can be
-connected to form a 32 bit counter. Each timer has three Compare/Capture
-channels and can be used as PWM or Quadrature Decoder. Available clock sources
-are the cpu's HFPERCLK (with a 10-bit prescaler) or an external pin.
-
-Required properties:
-- compatible : Should be "energymicro,efm32-timer"
-- reg : Address and length of the register set
-- clocks : Should contain a reference to the HFPERCLK
-
-Optional properties:
-- interrupts : Reference to the timer interrupt
-
-Example:
-
-timer@40010c00 {
-	compatible = "energymicro,efm32-timer";
-	reg = <0x40010c00 0x400>;
-	interrupts = <14>;
-	clocks = <&cmu clk_HFPERCLKTIMER3>;
-};